scholarly journals All-Nitrogen Cages and Molecular Crystals: Topological Rules, Stability, and Pyrolysis Paths

Computation ◽  
2020 ◽  
Vol 8 (4) ◽  
pp. 91
Author(s):  
Konstantin P. Katin ◽  
Valeriy B. Merinov ◽  
Alexey I. Kochaev ◽  
Savas Kaya ◽  
Mikhail M. Maslov
Keyword(s):  
Room Temperature ◽  
Molecular Crystals ◽  
High Energy ◽  
Binding Energies ◽  
Ab Initio Molecular Dynamics ◽  
Quantum Mechanical ◽  
Intrinsic Reaction Coordinate ◽  
Activation Barriers ◽  
Gibbs Energies ◽  
The Stability

We combined ab initio molecular dynamics with the intrinsic reaction coordinate in order to investigate the mechanisms of stability and pyrolysis of N4 ÷ N120 fullerene-like nitrogen cages. The stability of the cages was evaluated in terms of the activation barriers and the activation Gibbs energies of their thermal-induced breaking. We found that binding energies, bond lengths, and quantum-mechanical descriptors failed to predict the stability of the cages. However, we derived a simple topological rule that adjacent hexagons on the cage surface resulted in its instability. For this reason, the number of stable nitrogen cages is significantly restricted in comparison with their carbon counterparts. As a rule, smaller clusters are more stable, whereas the earlier proposed large cages collapse at room temperature. The most stable all-nitrogen cages are the N4 and N6 clusters, which can form the van der Waals crystals with densities of 1.23 and 1.36 g/cm3, respectively. The examination of their band structures and densities of electronic states shows that they are both insulators. Their power and sensitivity are not inferior to the modern advanced high-energy nanosystems.

scholarly journals Formulation and Evaluation of Moringa Seed Oil Nanoemulsion Gel

1970 ◽  
Vol 7 (6) ◽  
pp. 1-5 ◽  
Author(s):  
Nita Tirmiara ◽  
Julia Reveny ◽  
Jansen Silalahi
Keyword(s):  
Particle Size ◽  
Room Temperature ◽  
Seed Oil ◽  
Tween 80 ◽  
High Energy ◽  
Particle Size Measurement ◽  
Nanoemulsion Gel ◽  
Oil Concentration ◽  
Gel Preparation ◽  
The Stability

Objective: The objective of this study was to formulate and evaluate the moringa seed oil (MSO) nanoemulsion gel using high-energy emulsification method. Methods: Nanoemulsion gel formulated by high-energy emulsification method using the comparison of surfactant (tween 80) and cosurfactant (sorbitol) concentration with the variation of moringa seed oil concentration. Evaluation of the stability of the nanoemulsion gel preparation includes centrifugation test, viscosity, pH, organoleptic observation (odor, color, clarity, and phase separation), and particle size measurement during 12 weeks storage at room temperature. Results: The results showed that all nanoemulsion gel preparations are transparent yellow, characteristic odor, type weights 1.0888–1.1193 g/ml, and stable for 12 weeks storage at room temperature. The smallest particle size produced by the nanoemulsion gel preparation in a formula of the concentration of 5%, which 52.25 nm. Conclusions: Moringa seed oil can be formulated as a nanoemulsion gel by high energy emulsification method. MSO  with a 5% concentration was very stable for 12 weeks storage.    

Methods for the Concentration of Bovine Ac-Globulin (Factor V)

1961 ◽  
Vol 06 (03) ◽  
pp. 435-444 ◽  
Author(s):  
Ricardo H. Landaburu ◽  
Walter H. Seegers
Keyword(s):  
Room Temperature ◽  
Barium Carbonate ◽  
Deae Cellulose ◽  
Reducing Agents ◽  
Factor V ◽  
Isoelectric Precipitation ◽  
Stabilizing Agent ◽  
Bovine Plasma ◽  
The Stability

SummaryAn attempt was made to obtain Ac-globulin from bovine plasma. The concentrates contain mostly protein, and phosphorus is also present. The stability characteristics vary from one preparation to another, but in general there was no loss before 1 month in a deep freeze or before 1 week in an icebox, or before 5 hours at room temperature. Reducing agents destroy the activity rapidly. S-acetylmercaptosuccinic anhydride is an effective stabilizing agent. Greatest stability was at pH 6.0.In the purification bovine plasma is adsorbed with barium carbonate and diluted 6-fold with water. Protein is removed at pH 6.0 and the Ac-globulin is precipitated at pH 5.0. Rivanol and alcohol fractionation is followed by chromatography on Amberlite IRC-50 or DEAE-cellulose. The final product is obtained by isoelectric precipitation.

Tyrosine-Selective Bioconjugation with Iminoxyl Radicals

2020 ◽  
Author(s):  
Katsuya Maruyama ◽  
Takashi Ishiyama ◽  
Yohei Seki ◽  
Kounosuke Oisaki ◽  
Motomu Kanai
Keyword(s):  
Reaction Time ◽  
Steric Hindrance ◽  
Room Temperature ◽  
Water Soluble ◽  
Light Irradiation ◽  
Sodium Ascorbate ◽  
Iminoxyl Radical ◽  
Short Reaction Time ◽  
Modified Peptides ◽  
The Stability

A novel Tyr-selective protein bioconjugation using the water-soluble persistent iminoxyl radical is described. The conjugation proceeded with high Tyr-selectivity and short reaction time under biocompatible conditions (room temperature in buffered media under air). The stability of the conjugates was tunable depending on the steric hindrance of iminoxyl. The presence of sodium ascorbate and/or light irradiation promoted traceless deconjugation, restoring the native Tyr structure. The method is applied to the synthesis of a protein-dye conjugate and further derivatization to azobenzene-modified peptides.

Circular dichroism and infrared study of β-turn formation in repeat peptides of elastin

1987 ◽  
Vol 52 (5) ◽  
pp. 1356-1361
Author(s):  
S. Abdel Rahman ◽  
M. Elsafty ◽  
A. Hattaba
Keyword(s):  
Circular Dichroism ◽  
Solid State ◽  
Ir Spectra ◽  
Chain Length ◽  
Room Temperature ◽  
Infrared Study ◽  
Feature Characteristic ◽  
C 50 ◽  
The Stability ◽  
Circular Dichroïsm

The conformation of elastin-like peptides Boc-Ala-Pro-Gly-Val-APEGM, Boc-Ala-Pro-Gly-Val-Gly-Val-APEGM, Boc-Ala-Pro-Gly-Val-Ala-Pro-Gly-Val-Gly-Val-APEGM, Boc-Ala-Pro-Gly-Val-Gly-Val-Ala-Pro-Gly-Val-Gly-Val-APEGM were examined in solution using circular dichroism at 30 °C, 50 °C, and 70 °C and in solid state by IR at room temperature. The studies show that the β-turn is a significant conformational feature for peptides under investigation in solution at 30 °C and 50 °C, but at 70 °C the tetra, hexa, and decapeptides show the CD feature characteristic of the β-structure while the dodecapeptide spectra show the presence of β-turn which indicates the stability of the β-turn at this chain length. The IR spectra show that in the solid state at room temperature all investigated peptides assume essentially a β-turn except the tetrapeptide which present evidence of antiparallel β-structure. The β-turn contribution in the IR spectra increases with the increase of the chain length of the peptide.

Cholesterol in Serum and Lipoprotein Fractions

1956 ◽  
Vol 2 (3) ◽  
pp. 145-159 ◽  
Author(s):  
Joseph T Anderson ◽  
Ancel Keys
Keyword(s):  
Human Serum ◽  
Total Cholesterol ◽  
Filter Paper ◽  
Room Temperature ◽  
Paper Electrophoresis ◽  
Cholesterol Content ◽  
Intraindividual Variability ◽  
Detailed Data ◽  
The Stability ◽  
Source Of Error

Abstract 1. Methods are described for the separation, by paper electrophoresis and by cold ethanol, of α- and β-lipoproteins in 0.1 ml. of serum, with subsequent analysis of cholesterol in the separated portions. 2. It is shown that both methods of separation yield separated fractions containing substantially the same amounts of cholesterol. 3. Detailed data are given on the errors of measurement for total cholesterol and for cholesterol in the separated lipoprotein fractions. 4. Studies are reported on the stability of cholesterol in stored serum and on paper electrophoresis strips. It is shown that simple drying on filter paper causes no change in cholesterol content and yields a product that is stable for many weeks at ordinary room temperature. 5. The sources of variability in human serum cholesterol values are examined and it is shown that spontaneous intraindividual variability is a much greater source of error than the errors of measurement with these methods.

scholarly journals Research Progress toward Room Temperature Sodium Sulfur Batteries: A Review

Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1535
Author(s):  
Yanjie Wang ◽  
Yingjie Zhang ◽  
Hongyu Cheng ◽  
Zhicong Ni ◽  
Ying Wang ◽  
...  
Keyword(s):  
Energy Storage ◽  
Room Temperature ◽  
High Energy ◽  
Safety Performance ◽  
High Energy Density ◽  
Research Progress ◽  
Storage Performance ◽  
Sulfur Battery ◽  
Sodium Sulfur Battery ◽  
Sodium Sulfur

Lithium metal batteries have achieved large-scale application, but still have limitations such as poor safety performance and high cost, and limited lithium resources limit the production of lithium batteries. The construction of these devices is also hampered by limited lithium supplies. Therefore, it is particularly important to find alternative metals for lithium replacement. Sodium has the properties of rich in content, low cost and ability to provide high voltage, which makes it an ideal substitute for lithium. Sulfur-based materials have attributes of high energy density, high theoretical specific capacity and are easily oxidized. They may be used as cathodes matched with sodium anodes to form a sodium-sulfur battery. Traditional sodium-sulfur batteries are used at a temperature of about 300 °C. In order to solve problems associated with flammability, explosiveness and energy loss caused by high-temperature use conditions, most research is now focused on the development of room temperature sodium-sulfur batteries. Regardless of safety performance or energy storage performance, room temperature sodium-sulfur batteries have great potential as next-generation secondary batteries. This article summarizes the working principle and existing problems for room temperature sodium-sulfur battery, and summarizes the methods necessary to solve key scientific problems to improve the comprehensive energy storage performance of sodium-sulfur battery from four aspects: cathode, anode, electrolyte and separator.

scholarly journals A Review on Combination of Ab Initio Molecular Dynamics and NMR Parameters Calculations

2021 ◽  
Vol 22 (9) ◽  
pp. 4378
Author(s):  
Anna Helena Mazurek ◽  
Łukasz Szeleszczuk ◽  
Dariusz Maciej Pisklak
Keyword(s):  
Molecular Dynamics ◽  
Ab Initio ◽  
Small Amplitude ◽  
Ab Initio Molecular Dynamics ◽  
Quantum Mechanical ◽  
Time Step ◽  
Noticeable Effect ◽  
Nmr Parameters ◽  
Mechanical Methods ◽  
Simulation Time

This review focuses on a combination of ab initio molecular dynamics (aiMD) and NMR parameters calculations using quantum mechanical methods. The advantages of such an approach in comparison to the commonly applied computations for the structures optimized at 0 K are presented. This article was designed as a convenient overview of the applied parameters such as the aiMD type, DFT functional, time step, or total simulation time, as well as examples of previously studied systems. From the analysis of the published works describing the applications of such combinations, it was concluded that including fast, small-amplitude motions through aiMD has a noticeable effect on the accuracy of NMR parameters calculations.

scholarly journals Quantum-mechanical hydration plays critical role in the stability of firefly oxyluciferin isomers: State-of-the-art calculations of the excited states

2020 ◽  
Vol 153 (20) ◽  
pp. 201103
Author(s):  
Yoshifumi Noguchi ◽  
Miyabi Hiyama ◽  
Motoyuki Shiga ◽  
Hidefumi Akiyama ◽  
Osamu Sugino
Keyword(s):  
Excited States ◽  
State Of The Art ◽  
Critical Role ◽  
Quantum Mechanical ◽  
The Stability

scholarly journals Nanotechnology-based approaches for targeting and delivery of drugs via Hexakis (m-PE) macrocycles

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Samaneh Pasban ◽  
Heidar Raissi
Keyword(s):  
Drug Delivery ◽  
Density Functional ◽  
Water Solution ◽  
Decomposition Analysis ◽  
Binding Energies ◽  
Energy Decomposition Analysis ◽  
Partial Density ◽  
High Propensity ◽  
The Stability ◽  
Novel Applications

AbstractHexakis (m-phenylene ethynylene) (m-PE) macrocycles, with aromatic backbones and multiple hydrogen-bonding side chains, had a very high propensity to self-assemble via H-bond and π–π stacking interactions to form nanotubular structures with defined inner pores. Such stacking of rigid macrocycles is leading to novel applications that enable the researchers to explored mass transport in the sub-nanometer scale. Herein, we performed density functional theory (DFT) calculations to examine the drug delivery performance of the hexakis dimer as a novel carrier for doxorubicin (DOX) agent in the chloroform and water solvents. Based on the DFT results, it is found that the adsorption of DOX on the carrier surface is typically physisorption with the adsorption strength values of − 115.14 and − 83.37 kJ/mol in outside and inside complexes, respectively, and so that the essence of the drug remains intact. The negative values of the binding energies for all complexes indicate the stability of the drug molecule inside and outside the carrier's cavities. The energy decomposition analysis (EDA) has also been performed and shown that the dispersion interaction has an essential role in stabilizing the drug-hexakis dimer complexes. To further explore the electronic properties of dox, the partial density of states (PDOS and TDOS) are calculated. The atom in molecules (AIM) and Becke surface (BS) methods are also analyzed to provide an inside view of the nature and strength of the H-bonding interactions in complexes. The obtained results indicate that in all studied complexes, H-bond formation is the driving force in the stabilization of these structures, and also chloroform solvent is more favorable than the water solution. Overall, our findings offer insightful information on the efficient utilization of hexakis dimer as drug delivery systems to deliver anti-cancer drugs.

Pressure dependent ultrasonic properties of hcp hafnium metal

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ramanshu P. Singh ◽  
Shakti Yadav ◽  
Giridhar Mishra ◽  
Devraj Singh
Keyword(s):  
Elastic Constants ◽  
Pressure Range ◽  
Room Temperature ◽  
Ultrasonic Attenuation ◽  
Coupling Constants ◽  
Ultrasonic Properties ◽  
Acoustic Coupling ◽  
Third Order Elastic Constants ◽  
The Stability ◽  
The Given

Abstract The elastic and ultrasonic properties have been evaluated at room temperature between the pressure 0.6 and 10.4 GPa for hexagonal closed packed (hcp) hafnium (Hf) metal. The Lennard-Jones potential model has been used to compute the second and third order elastic constants for Hf. The elastic constants have been utilized to calculate the mechanical constants such as Young’s modulus, bulk modulus, shear modulus, Poisson’s ratio, and Zener anisotropy factor for finding the stability and durability of hcp hafnium metal within the chosen pressure range. The second order elastic constants were also used to compute the ultrasonic velocities along unique axis at different angles for the given pressure range. Further thermophysical properties such as specific heat per unit volume and energy density have been estimated at different pressures. Additionally, ultrasonic Grüneisen parameters and acoustic coupling constants have been found out at room temperature. Finally, the ultrasonic attenuation due to phonon–phonon interaction and thermoelastic mechanisms has been investigated for the chosen hafnium metal. The obtained results have been discussed in correlation with available findings for similar types of hcp metals.

Sign in / Sign up

Export Citation Format

Share Document