scholarly journals Urban Morphological Controls on Surface Thermal Dynamics: A Comparative Assessment of Major European Cities with a Focus on Athens, Greece

Climate ◽  
2020 ◽  
Vol 8 (11) ◽  
pp. 131
Author(s):  
Ilias Agathangelidis ◽  
Constantinos Cartalis ◽  
Mat Santamouris
Keyword(s):  
Surface Temperature ◽  
Land Surface ◽  
Urban Form ◽  
Negative Relationship ◽  
Urban Surface ◽  
Thermal Dynamics ◽  
Near Surface ◽  
Surface Parameters ◽  
European Cities ◽  
The City

Variations in urban form lead to the development of distinctive intra-urban surface thermal patterns. Previous assessment of the relation between urban structure and satellite-based Land Surface Temperature (LST) has generally been limited to single-city cases. Here, examining 25 European cities (June–August 2017), we estimated the statistical association between surface parameters—the impervious fraction (λimp), the building fraction (λb), and the building height (H)—and the neighborhood scale (1000 × 1000 m) LST variations, as captured by the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor. Correlation analysis, multiple linear regression, and spatial regression were used. As expected, λimp had a consistent positive influence on LSTs. In contrast, the relation of LST with λb and H was generally weaker or negative in the daytime, whereas at night it shifted to a robust positive effect. In particular, daytime LSTs of densely built, high-rise European districts tended to have lower values. This was especially the case for the city of Athens, Greece, where a more focused analysis was conducted, using further surface parameters and the Local Climate Zone (LCZ) scheme. For the urban core of the city, the canyon aspect ratio H/W had a statistically significant (p <0.01) negative relationship with LST by day (Spearman’s rho = −0.68) and positive during nighttime (rho = 0.45). The prevailing intra-urban surface thermal variability in Athens was well reproduced by a 5-day numerical experiment using the meteorological Weather Research and Forecasting Model (WRF) model and a modified urban parameterization scheme. Although the simulation resulted in some systematic errors, the overall accuracy of the model was adequate, regarding the surface temperature (RMSE = 2.4 K) and the near-surface air temperature (RMSE = 1.7 K) estimations.

scholarly journals Using MODIS Land Surface Temperatures for Permafrost Thermal Modeling in Beiluhe Basin on the Qinghai-Tibet Plateau

Sensors ◽  
2019 ◽  
Vol 19 (19) ◽  
pp. 4200 ◽  
Author(s):  
Anyuan Li ◽  
Caichu Xia ◽  
Chunyan Bao ◽  
Guoan Yin
Keyword(s):  
Surface Temperature ◽  
Land Surface ◽  
Ground Surface ◽  
Tibet Plateau ◽  
Active Layer Thickness ◽  
Permafrost Region ◽  
Thermal Dynamics ◽  
Near Surface ◽  
Warm Bias ◽  
Qinghai Tibet Plateau

It is essential to monitor the ground temperature over large areas to understand and predict the effects of climate change on permafrost due to its rapid warming on the Qinghai-Tibet Plateau (QTP). Land surface temperature (LST) is an important parameter for the energy budget of permafrost environments. Moderate Resolution Imaging Spectroradiometer (MODIS) LST products are especially valuable for detecting permafrost thermal dynamics across the QTP. This study presents a comparison of MODIS-LST values with in situ near-surface air temperature (Ta), and ground surface temperature (GST) obtained from 2014 to 2016 at five sites in Beiluhe basin, a representative permafrost region on the QTP. Furthermore, the performance of the thermal permafrost model forced by MODIS-LSTs was studied. Averaged LSTs are found to strongly correlated with Ta and GST with R2 values being around 0.9. There is a significant warm bias (4.43–4.67 °C) between averaged LST and Ta, and a slight warm bias (0.67–2.66 °C) between averaged LST and GST. This study indicates that averaged MODIS-LST is supposed to be a useful data source for permafrost monitoring. The modeled ground temperatures and active-layer thickness have a good agreement with the measurements, with a difference of less than 1.0 °C and 0.4 m, respectively.

Spatial Hotspot Analysis of Bucharest’s Urban Heat Island (UHI) Using Modis Data

2018 ◽  
Vol 18 (1) ◽  
pp. 14-22 ◽  
Author(s):  
Georgiana Grigoraș ◽  
Bogdan Urițescu
Keyword(s):  
Surface Temperature ◽  
Air Temperature ◽  
Land Surface Temperature ◽  
Hot Spots ◽  
Land Surface ◽  
Hot Spot ◽  
Monitoring Network ◽  
Residential Areas ◽  
Hotspot Analysis ◽  
The City

Abstract The aim of the study is to find the relationship between the land surface temperature and air temperature and to determine the hot spots in the urban area of Bucharest, the capital of Romania. The analysis was based on images from both moderate-resolution imaging spectroradiometer (MODIS), located on both Terra and Aqua platforms, as well as on data recorded by the four automatic weather stations existing in the endowment of The National Air Quality Monitoring Network, from the summer of 2017. Correlation coefficients between land surface temperature and air temperature were higher at night (0.8-0.87) and slightly lower during the day (0.71-0.77). After the validation of satellite data with in-situ temperature measurements, the hot spots in the metropolitan area of Bucharest were identified using Getis-Ord spatial statistics analysis. It has been achieved that the “very hot” areas are grouped in the center of the city and along the main traffic streets and dense residential areas. During the day the "very hot spots” represent 33.2% of the city's surface, and during the night 31.6%. The area where the mentioned spots persist, falls into the "very hot spot" category both day and night, it represents 27.1% of the city’s surface and it is mainly represented by the city center.

scholarly journals Seasonal Variations of Daytime Land Surface Temperature and Their Underlying Drivers over Wuhan, China

2021 ◽  
Vol 13 (2) ◽  
pp. 323
Author(s):  
Liang Chen ◽  
Xuelei Wang ◽  
Xiaobin Cai ◽  
Chao Yang ◽  
Xiaorong Lu
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Vegetation Index ◽  
Normalized Difference Vegetation Index ◽  
Maximum Temperature ◽  
Maximum Temperature Difference ◽  
Rapid Urbanization ◽  
The Impact ◽  
The City

Rapid urbanization greatly alters land surface vegetation cover and heat distribution, leading to the development of the urban heat island (UHI) effect and seriously affecting the healthy development of cities and the comfort of living. As an indicator of urban health and livability, monitoring the distribution of land surface temperature (LST) and discovering its main impacting factors are receiving increasing attention in the effort to develop cities more sustainably. In this study, we analyzed the spatial distribution patterns of LST of the city of Wuhan, China, from 2013 to 2019. We detected hot and cold poles in four seasons through clustering and outlier analysis (based on Anselin local Moran’s I) of LST. Furthermore, we introduced the geographical detector model to quantify the impact of six physical and socio-economic factors, including the digital elevation model (DEM), index-based built-up index (IBI), modified normalized difference water index (MNDWI), normalized difference vegetation index (NDVI), population, and Gross Domestic Product (GDP) on the LST distribution of Wuhan. Finally, to identify the influence of land cover on temperature, the LST of croplands, woodlands, grasslands, and built-up areas was analyzed. The results showed that low temperatures are mainly distributed over water and woodland areas, followed by grasslands; high temperatures are mainly concentrated over built-up areas. The maximum temperature difference between land covers occurs in spring and summer, while this difference can be ignored in winter. MNDWI, IBI, and NDVI are the key driving factors of the thermal values change in Wuhan, especially of their interaction. We found that the temperature of water area and urban green space (woodlands and grasslands) tends to be 5.4 °C and 2.6 °C lower than that of built-up areas. Our research results can contribute to the urban planning and urban greening of Wuhan and promote the healthy and sustainable development of the city.

scholarly journals The Challenge of the Urban Compact Form: Three-Dimensional Index Construction and Urban Land Surface Temperature Impacts

2021 ◽  
Vol 13 (6) ◽  
pp. 1067
Author(s):  
Han Yan ◽  
Kai Wang ◽  
Tao Lin ◽  
Guoqin Zhang ◽  
Caige Sun ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Urban Form ◽  
Three Dimensional ◽  
Compact Form ◽  
Landsat 8 ◽  
Driving Mechanism ◽  
Building Density ◽  
Building Height

Cities are growing higher and denser, and understanding and constructing the compact city form is of great importance to optimize sustainable urbanization. The two-dimensional (2D) urban compact form has been widely studied by previous researchers, while the driving mechanism of three-dimensional (3D) compact morphology, which reflects the reality of the urban environment has seldom been developed. In this study, land surface temperature (LST) was retrieved by using the mono-window algorithm method based on Landsat 8 images of Xiamen in South China, which were acquired respectively on 14 April, 15 August, 2 October, and 21 December in 2017, and 11 March in 2018. We then aimed to explore the driving mechanism of the 3D compact form on the urban heat environment (UHE) based on our developed 3D Compactness Index (VCI) and remote sensing, as well as Geo-Detector techniques. The results show that the 3D compact form can positively effect UHE better than individual urban form construction elements, as can the combination of the 2D compact form with building height. Individually, building density had a greater effect on UHE than that of building height. At the same time, an integration of building density and height showed an enhanced inter-effect on UHE. Moreover, we explore the temporal and spatial UHE heterogeneity with regards to 3D compact form across different seasons. We also investigate the UHE impacts discrepancy caused by different 3D compactness categories. This shows that increasing the 3D compactness of an urban community from 0.016 to 0.323 would increase the heat accumulation, which was, in terms of satellite derived LST, by 1.35 °C, suggesting that higher compact forms strengthen UHE. This study highlights the challenge of the urban 3D compact form in respect of its UHE impact. The related evaluation in this study would help shed light on urban form optimization.

Dominant urban form and its relation to nighttime land surface temperature in the rapidly urbanizing National Capital Region of India

Urban Climate ◽  
2021 ◽  
Vol 40 ◽  
pp. 101002
Author(s):  
Saurav Chakraborty ◽  
Suvamoy Pramanik ◽  
Alexander Follmann ◽  
Biswajit Giri ◽  
Biswajit Mondal ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Urban Form ◽  
National Capital Region ◽  
Capital Region ◽  
National Capital

scholarly journals Near–surface air temperature and snow skin temperature comparison from CREST-SAFE station data with MODIS land surface temperature data

2015 ◽  
Vol 12 (8) ◽  
pp. 7665-7687 ◽  
Author(s):  
C. L. Pérez Díaz ◽  
T. Lakhankar ◽  
P. Romanov ◽  
J. Muñoz ◽  
R. Khanbilvardi ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Skin Temperature ◽  
Air Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Hydrological Cycle ◽  
Critical Role ◽  
Surface Air Temperature ◽  
Balance Model ◽  
Near Surface

Abstract. Land Surface Temperature (LST) is a key variable (commonly studied to understand the hydrological cycle) that helps drive the energy balance and water exchange between the Earth's surface and its atmosphere. One observable constituent of much importance in the land surface water balance model is snow. Snow cover plays a critical role in the regional to global scale hydrological cycle because rain-on-snow with warm air temperatures accelerates rapid snow-melt, which is responsible for the majority of the spring floods. Accurate information on near-surface air temperature (T-air) and snow skin temperature (T-skin) helps us comprehend the energy and water balances in the Earth's hydrological cycle. T-skin is critical in estimating latent and sensible heat fluxes over snow covered areas because incoming and outgoing radiation fluxes from the snow mass and the air temperature above make it different from the average snowpack temperature. This study investigates the correlation between MODerate resolution Imaging Spectroradiometer (MODIS) LST data and observed T-air and T-skin data from NOAA-CREST-Snow Analysis and Field Experiment (CREST-SAFE) for the winters of 2013 and 2014. LST satellite validation is imperative because high-latitude regions are significantly affected by climate warming and there is a need to aid existing meteorological station networks with the spatially continuous measurements provided by satellites. Results indicate that near-surface air temperature correlates better than snow skin temperature with MODIS LST data. Additional findings show that there is a negative trend demonstrating that the air minus snow skin temperature difference is inversely proportional to cloud cover. To a lesser extent, it will be examined whether the surface properties at the site are representative for the LST properties within the instrument field of view.

scholarly journals The Effects of Green Roofs on Outdoor Thermal Comfort, Urban Heat Island Mitigation and Energy Savings

Atmosphere ◽  
2020 ◽  
Vol 11 (2) ◽  
pp. 123 ◽  
Author(s):  
Guglielmina Mutani ◽  
Valeria Todeschi
Keyword(s):  
Surface Temperature ◽  
Thermal Comfort ◽  
Urban Heat Island ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Green Roofs ◽  
Heat Island ◽  
Urban Context ◽  
Urban Heat ◽  
The City

There is growing attention to the use of greenery in urban areas, in various forms and functions, as an instrument to reduce the impact of human activities on the urban environment. The aim of this study has been to investigate the use of green roofs as a strategy to reduce the urban heat island effect and to improve the thermal comfort of indoor and outdoor environments. The effects of the built-up environment, the presence of vegetation and green roofs, and the urban morphology of the city of Turin (Italy) have been assessed considering the land surface temperature distribution. This analysis has considered all the information recorded by the local weather stations and satellite images, and compares it with the geometrical and typological characteristics of the city in order to find correlations that confirm that greenery and vegetation improve the livability of an urban context. The results demonstrate that the land-surface temperature, and therefore the air temperature, tend to decrease as the green areas increase. This trend depends on the type of urban context. Based on the results of a green-roofs investigation of Turin, the existing and potential green roofs are respectively almost 300 (257,380 m2) and 15,450 (6,787,929 m2). Based on potential assessment, a strategy of priority was established according to the characteristics of building, to the presence of empty spaces, and to the identification of critical areas, in which the thermal comfort conditions are poor with low vegetation. This approach can be useful to help stakeholders, urban planners, and policy makers to effectively mitigate the urban heat island (UHI), improve the livability of the city, reduce greenhouse gas (GHG) emissions and gain thermal comfort conditions, and to identify policies and incentives to promote green roofs.

scholarly journals Quantifying the Effects of Urban Form on Land Surface Temperature in Subtropical High-Density Urban Areas Using Machine Learning

2019 ◽  
Vol 11 (8) ◽  
pp. 959 ◽  
Author(s):  
Yanwei Sun ◽  
Chao Gao ◽  
Jialin Li ◽  
Run Wang ◽  
Jian Liu
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Urban Form ◽  
Urban Areas ◽  
Thermal Environment ◽  
High Density ◽  
Cooling Effects ◽  
Urban Thermal Environment ◽  
The Impact

It is widely acknowledged that urban form significantly affects urban thermal environment, which is a key element to adapt and mitigate extreme high temperature weather in high-density urban areas. However, few studies have discussed the impact of physical urban form features on the land surface temperature (LST) from a perspective of comprehensive urban spatial structures. This study used the ordinary least-squares regression (OLS) and random forest regression (RF) to distinguish the relative contributions of urban form metrics on LST at three observation scales. Results of this study indicate that more than 90% of the LST variations were explained by selected urban form metrics using RF. Effects of the magnitude and direction of urban form metrics on LST varied with the changes of seasons and observation scales. Overall, building morphology and urban ecological infrastructure had dominant effects on LST variations in high-density urban centers. Urban green space and water bodies demonstrated stronger cooling effects, especially in summer. Building density (BD) exhibited significant positive effects on LST, whereas the floor area ratio (FAR) showed a negative influence on LST. The results can be applied to investigate and implement urban thermal environment mitigation planning for city managers and planners.

A new approach for modeling near surface temperature lapse rate based on normalized land surface temperature data

2020 ◽  
Vol 242 ◽  
pp. 111746 ◽  
Author(s):  
Mohammad Karimi Firozjaei ◽  
Solmaz Fathololoumi ◽  
Seyed Kazem Alavipanah ◽  
Majid Kiavarz ◽  
Ali Reza Vaezi ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Temperature Data ◽  
Lapse Rate ◽  
Near Surface ◽  
New Approach ◽  
Temperature Lapse Rate ◽  
Surface Temperature Data
Sign in / Sign up

Export Citation Format

Share Document