scholarly journals On the Impact of the Dynamics of Heat Transfer of the Thermal Machine Working Fluid and Heat Sources on the Shape of the Boundary of the Set of Realizable Regimes

2019 ◽  
Vol 3 (2) ◽  
pp. 36
Author(s):  
Margarita Zaeva ◽  
Anatoly Tsirlin ◽  
Olga Didina
Keyword(s):  
Heat Transfer ◽  
Heat Exchange ◽  
Energy Conversion ◽  
Conversion Efficiency ◽  
Heat Engine ◽  
Energy Conversion Efficiency ◽  
Maximum Power ◽  
Working Fluid ◽  
Transfer Coefficients ◽  
The Impact

From the point of view of finite time thermodynamics, the performance boundaries of thermal machines are considered, taking into account the irreversibility of the heat exchange processes of the working fluid with hot and cold sources. We show how the dynamics of heat exchange affects the shape of the optimal cycle of a heat engine and its performance, in particular, energy conversion efficiency in the maximum power mode. This energy conversion efficiency can depend only on the ratio of the heat transfer coefficients to the sources, or not depend on them at all. A class of dynamic functions corresponding to “natural” requirements is introduced and it is shown that, for any dynamics from this class, the optimal cycle consists of two isotherms and two adiabats, not only for the maximum power problem, but also for the problem of maximum energy conversion efficiency at a given power. Examples are given for calculating the parameters of the optimal cycle for the cases when the heat transfer coefficient to the cold source is arbitrarily large, and for dynamics in the form of a linear phenomenological (Fourier heat transfer) law.

Finite Time Thermodynamics: Realizability Domain of Heat to Work Converters

2019 ◽  
Vol 44 (2) ◽  
pp. 181-191 ◽  
Author(s):  
M. A. Zaeva ◽  
A. M. Tsirlin ◽  
O. V. Didina
Keyword(s):  
Heat Transfer ◽  
Heat Exchange ◽  
Energy Conversion ◽  
Conversion Efficiency ◽  
Finite Time ◽  
Heat Engine ◽  
Energy Conversion Efficiency ◽  
Maximum Power ◽  
Working Fluid ◽  
Finite Time Thermodynamics

Abstract From the point of view of finite time thermodynamics, the performance boundaries of thermal machines are considered, taking into account the irreversibility of the heat exchange processes of the working fluid with hot and cold sources. It is shown how the kinetics of heat exchange affects the shape of the optimal cycle of a heat engine and its performance, with a focus on the energy conversion efficiency in the maximum power mode. This energy conversion efficiency can depend only on the ratio of the heat transfer coefficients to the sources or not depend on them at all. A class of kinetic functions corresponding to “natural” requirements is introduced and it is shown that for any kinetics from this class the optimal cycle consists of two isotherms and two adiabats, not only for the maximum power problem, but also for the problem of maximum energy conversion efficiency at a given power. Examples are given for calculating the parameters of the optimal cycle for the case when the heat transfer coefficient to the cold source is arbitrarily large and for kinetics in the form of a Fourier law.

The Confined-Discharge Plasma Generator With Local Fluid Constriction

1972 ◽  
Vol 94 (4) ◽  
pp. 818-823 ◽  
Author(s):  
J. R. Mahan ◽  
C. J. Cremers
Keyword(s):  
Energy Conversion ◽  
Conversion Efficiency ◽  
Discharge Plasma ◽  
Fluid Dynamic ◽  
Plasma Generator ◽  
Energy Conversion Efficiency ◽  
Axial Position ◽  
Working Fluid ◽  
The Mean ◽  
Cold Gas

Normally the energy conversion efficiency of a confined-discharge plasma generator is inversely related to the mean enthalpy of the effluent plasma jet. The present paper describes a technique for increasing both the energy conversion efficiency, defined as the net fraction of the electrical power input transferred to the working fluid, and the mean enthalpy, defined as the net energy transferred to the working fluid per unit mass. A portion of the working fluid is introduced to the discharge through a narrow circumferential slit in the confining duct wall. Heat transfer and fluid dynamic effects associated with this high velocity inflow of cold gas cause the local discharge column to become highly constricted. Concomitant with this local fluid constriction (LFC) is a sharp increase in the local power density, resulting in enhanced energy transfer to the cold gas. Experimental results suggest that for optimum operation the gas injection slit should be located slightly upstream of the axial position where the discharge becomes thermally fully developed.

scholarly journals EFFECT OF OIL ON HEAT TRANSFER OF MIXED REFRIGERANT BOILING IN EVAPORATOR TUBES IN REFRIGERATION MACNINES

2019 ◽  
pp. 88-93
Author(s):  
Alexey Vasilievich Ezhov ◽  
Sergey Sergeevich Ivanov ◽  
Aleksandr Bukin ◽  
Vladimir Grigorievich Bukin
Keyword(s):  
Heat Transfer ◽  
Heat Exchange ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Flow Boiling ◽  
Working Fluid ◽  
Transfer Coefficients ◽  
Two Phase ◽  
Pipe Length ◽  
Heat Transfer Coefficients

The paper presents the results of an experimental study of the effect of oil on the heat transfer rate at boiling of mixed refrigerant R406A. Since the air conditioning system is not a pure refrigerant, but a mixture of oil with a concentration of up to 8%, such an amount of oil affects both hydrodynamics and heat exchange in the evaporators. The experimental work covers the entire range of regime parameters typical for these systems. There is shown the process of changing oil concentration in the pipe, as the working fluid boils, proving that most of the oil pipe does not impair the heat exchange in the course of two-phase flow boiling. Different modes of refrigerant R406A boiling dynamics have been defined, and each mode is given a quantitative assessment in terms of the effects of the oil and explaining of this effect on the fluid flow and heat transfer based on visual observations and the experiment results. The main factor of the effect is the freon-oil foam, which increases the proportion of the wetted surface in the wave and stratified modes and the heat transfer rate to 30%. A comparison of the heat transfer coefficients both in the cross section and along the pipe length has been performed, showing that the maximum change in heat transfer occurs in the upper part of the surface due to developing a dry wall on it and wetting it with freon-oil foam. A comparison of the heat transfer rate of pure refrigerant R406A has been done; the presence of oil in it shows that the effect of oil is complex and ambiguous. Calculation and criterion dependences for calculation of heat transfer coefficients in different modes have been proposed.

Effects of Irreversibility and Economics on the Performance of a Heat Engine

1992 ◽  
Vol 114 (4) ◽  
pp. 267-271 ◽  
Author(s):  
O. M. Ibrahim ◽  
S. A. Klein ◽  
J. W. Mitchell
Keyword(s):  
Heat Engine ◽  
Maximum Power ◽  
Working Fluid ◽  
Carnot Cycle ◽  
Transfer Coefficients ◽  
Maximum Power Point ◽  
Power Point ◽  
Method Of Lagrange Multipliers ◽  
Cycle Efficiency ◽  
Analytical Expressions

Previous investigators have shown that an internally reversible Carnot cycle, operating with heat transfer limitations between the heat source and heat sink at temperatures TH and TL, achieves maximum power at an efficiency equal to 1−TL/TH independent of the heat exchanger transfer coefficients. In this paper, optimization of the power output of an internally irreversible heat engine is considered for finite capacitance rates of the external fluid streams. The method of Lagrange multipliers is used to solve for working fluid temperatures which yield maximum power. Analytical expressions for the maximum power and the cycle efficiency at maximum power are obtained. The effects of irreversibility and economics on the performance of a heat engine are investigated. A relationship between the maximum power point and economically optimum design is identified. It is demonstrated that, with certain reasonable economic assumptions, the maximum power point of a heat engine corresponds to a point of minimum life-cycle costs.

scholarly journals A Variable Fractional Order Fuzzy Logic Control Based MPPT Technique for Improving Energy Conversion Efficiency of Thermoelectric Power Generator

Energies ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 4531
Author(s):  
N. Kanagaraj ◽  
Hegazy Rezk ◽  
Mohamed R. Gomaa
Keyword(s):  
Fuzzy Logic ◽  
Steady State ◽  
Energy Conversion ◽  
Fractional Order ◽  
Conversion Efficiency ◽  
Fuzzy Logic Controller ◽  
Energy Conversion Efficiency ◽  
Maximum Power ◽  
Maximum Power Point ◽  
Power Point

Thermoelectric generation technology is considered to be one of the viable methods to convert waste heat energy directly into electricity. The utilization of this technology has been impeded due to low energy conversion efficiency. This paper aims to improve the energy conversion efficiency of the thermoelectric generator (TEG) model with a novel maximum power point tracking (MPPT) technique. A variable fractional order fuzzy logic controller (VFOFLC)-based MPPT technique is proposed in the present work in which the operating point of the TEG is moved quickly towards an optimal position to increase the energy harvesting. The fraction order term α, introduced in the MPPT algorithm, will expand or contract the input domain of the fuzzy logic controller (FLC to shorten the tracking time and maintain a steady-state output around the maximum power point (MPP). The performance of the proposed MPPT technique was verified with the TEG model by simulation using MATLAB /SIMULINK software. Then, the overall performance of the VFOFLC-based MPPT technique was analyzed and compared with Perturb and observe (P&O) and incremental resistance (INR)-based MPPT techniques. The obtained results confirm that the proposed MPPT technique can improve the energy conversion efficiency of the TEG by harvesting the maximum power within a shorter time and maintaining a steady-state output when compared to other techniques.

Improving the Energy Conversion Efficiency of a Savonius Rotor Using Automatic Valves

2019 ◽  
Vol 141 (3) ◽  
Author(s):  
M. Amiri ◽  
M. Anbarsooz
Keyword(s):  
Low Power ◽  
Energy Conversion ◽  
Conversion Efficiency ◽  
Energy Conversion Efficiency ◽  
Maximum Power ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Tip Speed Ratio ◽  
Savonius Rotor ◽  
Rotor Axis

Savonius wind turbines are popular for their easy fabrication and high starting capabilities. Nevertheless, they suffer from low power coefficients, which are mainly due to a negative torque resulting from the blade moving against the upcoming wind. Numerous methods have been proposed to alleviate the negative torque, among them are modified blade profiles (twisted blades), adding flow deflectors, and valve-aided blades. In this study, the effects of adding automatic valves to a two-bladed Savonius rotor on its energy conversion efficiency are investigated numerically and experimentally. The valves are placed at three different positions: close to the rotor axis, at the blade center, and at the tip of the rotor. Results show that although adding valves can decrease the negative torque of the returning blade, they can also lead to a considerable reduction in the positive torque of the advancing blade. For the rotors in the current study, the maximum power coefficient is increased 20.8% when the valves are at the tip of the blades, while the two other cases have decreased the power coefficient of the rotor. Adding the valves to the blades does not change the tip speed ratio corresponding to the maximum power coefficient of the rotor.

Design an Economy Cooling System for the Solar Panel

2014 ◽  
Vol 931-932 ◽  
pp. 1078-1082 ◽  
Author(s):  
Warachit Phayom ◽  
Apichai Namahima
Keyword(s):  
Power Generation ◽  
Energy Conversion ◽  
Water Flow ◽  
Conversion Efficiency ◽  
Flow Rate ◽  
Cooling System ◽  
Water Flow Rate ◽  
Energy Conversion Efficiency ◽  
Solar Panel ◽  
Working Fluid

This study was for design an economy cooler for increasing energy conversion efficiency of solar panel. Acrylic plastic was used to be material of the cooler and water was a working fluid in the system. The cost to build the cooler model was around 400 Baht. The results found, using cooling system increased energy conversion efficiency and power generation, especially, water flow rate at 200 ccm. At 200 ccm of water flow rate, it increased 0.52% of energy conversion efficiency and 18.01% of power generation. Thus this flow rate was the best condition for increasing energy conversion efficiency. It might due to this flow rate was not slow and was not that fast to absorb heat from solar panel.

Experimental study of thermohydraulic characteristics and irreversibility analysis of novel axial corrugated tube with spring tape inserts

2020 ◽  
Vol 92 (3) ◽  
pp. 30901
Author(s):  
Suvanjan Bhattacharyya ◽  
Debraj Sarkar ◽  
Ulavathi Shettar Mahabaleshwar ◽  
Manoj K. Soni ◽  
M. Mohanraj
Keyword(s):  
Heat Transfer ◽  
Experimental Study ◽  
Thermal Performance ◽  
Working Fluid ◽  
The Novel ◽  
Heat Exchanger Tube ◽  
Heat Transfer Augmentation ◽  
Corrugated Tube ◽  
The Impact ◽  
Exchanger Tube

The current study experimentally investigates the heat transfer augmentation on the novel axial corrugated heat exchanger tube in which the spring tape is introduced. Air (Pr = 0.707) is used as a working fluid. In order to augment the thermohydraulic performance, a corrugated tube with inserts is offered. The experimental study is further extended by varying the important parameters like spring ratio (y = 1.5, 2.0, 2.5) and Reynolds number (Re = 10 000–52 000). The angular pitch between the two neighboring corrugations and the angle of the corrugation is kept constant through the experiments at β = 1200 and α = 600 respectively, while two different corrugations heights (h) are analyzed. While increasing the corrugation height and decreasing the spring ratio, the impact of the swirling effect improves the thermal performance of the system. The maximum thermal performance is obtained when the corrugation height is h = 0.2 and spring ratio y = 1.5. Eventually, correlations for predicting friction factor (f) and Nusselt number (Nu) are developed.

Sign in / Sign up

Export Citation Format

Share Document