scholarly journals 3D-Printed Collagen Scaffolds Promote Maintenance of Cryopreserved Patients-Derived Melanoma Explants

Cells ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 589
Author(s):  
Yun-Mi Jeong ◽  
ChulHwan Bang ◽  
MinJi Park ◽  
Sun Shin ◽  
Seokhwan Yun ◽  
...  
Keyword(s):  
Survival Rate ◽  
Three Dimensional ◽  
3D Culture ◽  
Collagen Scaffolds ◽  
Cancer Models ◽  
3D Culture System ◽  
3D Architecture ◽  
3D Printed ◽  
Reducing Costs

The development of an in vitro three-dimensional (3D) culture system with cryopreserved biospecimens could accelerate experimental research screening anticancer drugs, potentially reducing costs and time bench-to-beside. However, minimal research has explored the application of 3D bioprinting-based in vitro cancer models to cryopreserved biospecimens derived from patients with advanced melanoma. We investigated whether 3D-printed collagen scaffolds enable the propagation and maintenance of patient-derived melanoma explants (PDMEs). 3D-printed collagen scaffolds were fabricated with a 3DX bioprinter. After thawing, fragments from cryopreserved PDMEs (approximately 1–2 mm) were seeded onto the 3D-printed collagen scaffolds, and incubated for 7 to 21 days. The survival rate was determined with MTT and live and dead assays. Western blot analysis and immunohistochemistry staining was used to express the function of cryopreserved PDMEs. The results show that 3D-printed collagen scaffolds could improve the maintenance and survival rate of cryopreserved PDME more than 2D culture. MITF, Mel A, and S100 are well-known melanoma biomarkers. In agreement with these observations, 3D-printed collagen scaffolds retained the expression of melanoma biomarkers in cryopreserved PDME for 21 days. Our findings provide insight into the application of 3D-printed collagen scaffolds for closely mimicking the 3D architecture of melanoma and its microenvironment using cryopreserved biospecimens.

scholarly journals Comparison of Immunosuppressive and Angiogenic Properties of Human Amnion-Derived Mesenchymal Stem Cells between 2D and 3D Culture Systems

2019 ◽  
Vol 2019 ◽  
pp. 1-16 ◽  
Author(s):  
Vitale Miceli ◽  
Mariangela Pampalone ◽  
Serena Vella ◽  
Anna Paola Carreca ◽  
Giandomenico Amico ◽  
...  
Keyword(s):  
Stem Cells ◽  
Mesenchymal Stem Cells ◽  
Three Dimensional ◽  
3D Culture ◽  
Culture Method ◽  
Paracrine Factors ◽  
Human Amnion ◽  
Tissue Repair And Regeneration ◽  
3D Culture System

The secretion of potential therapeutic factors by mesenchymal stem cells (MSCs) has aroused much interest given the benefits that it can bring in the field of regenerative medicine. Indeed, the in vitro multipotency of these cells and the secretive capacity of both angiogenic and immunomodulatory factors suggest a role in tissue repair and regeneration. However, during culture, MSCs rapidly lose the expression of key transcription factors associated with multipotency and self-renewal, as well as the ability to produce functional paracrine factors. In our study, we show that a three-dimensional (3D) culture method is effective to induce MSC spheroid formation, to maintain the multipotency and to improve the paracrine activity of a specific population of human amnion-derived MSCs (hAMSCs). The regenerative potential of both 3D culture-derived conditioned medium (3D CM) and their exosomes (EXO) was assessed against 2D culture products. In particular, tubulogenesis assays revealed increased capillary maturation in the presence of 3D CM compared with both 2D CM and 2D EXO. Furthermore, 3D CM had a greater effect on inhibition of PBMC proliferation than both 2D CM and 2D EXO. To support this data, hAMSC spheroids kept in our 3D culture system remained viable and multipotent and secreted considerable amounts of both angiogenic and immunosuppressive factors, which were detected at lower levels in 2D cultures. This work reveals the placenta as an important source of MSCs that can be used for eventual clinical applications as cell-free therapies.

Design and Fabrication of a Three-Dimensional In Vitro System for Modeling Vascular Stenosis

2017 ◽  
Vol 23 (4) ◽  
pp. 859-871 ◽  
Author(s):  
Rebecca S. Jones ◽  
Pin H. Chang ◽  
Tzlil Perahia ◽  
Katrina A. Harmon ◽  
Lorain Junor ◽  
...  
Keyword(s):  
Three Dimensional ◽  
3D Culture ◽  
Cellular Interactions ◽  
Vessel Occlusion ◽  
Casting System ◽  
Vascular Pathogenesis ◽  
3D Culture System ◽  
Adverse Remodeling ◽  
Vascular Stenosis

AbstractVascular stenosis, the abnormal narrowing of blood vessels, arises from defective developmental processes or atherosclerosis-related adult pathologies. Stenosis triggers a series of adaptive cellular responses that induces adverse remodeling, which can progress to partial or complete vessel occlusion with numerous fatal outcomes. Despite its severity, the cellular interactions and biophysical cues that regulate this pathological progression are poorly understood. Here, we report the design and fabrication of a three-dimensional (3D) in vitro system to model vascular stenosis so that specific cellular interactions and responses to hemodynamic stimuli can be investigated. Tubular cellularized constructs (cytotubes) were produced, using a collagen casting system, to generate a stenotic arterial model. Fabrication methods were developed to create cytotubes containing co-cultured vascular cells, where cell viability, distribution, morphology, and contraction were examined. Fibroblasts, bone marrow primary cells, smooth muscle cells (SMCs), and endothelial cells (ECs) remained viable during culture and developed location- and time-dependent morphologies. We found cytotube contraction to depend on cellular composition, where SMC-EC co-cultures adopted intermediate contractile phenotypes between SMC- and EC-only cytotubes. Our fabrication approach and the resulting artery model can serve as an in vitro 3D culture system to investigate vascular pathogenesis and promote the tissue engineering field.

scholarly journals Induced Osteogenesis in Plants Decellularized Scaffolds

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Jennifer Lee ◽  
Hyerin Jung ◽  
Narae Park ◽  
Sung-Hwan Park ◽  
Ji Hyeon Ju
Keyword(s):  
Three Dimensional ◽  
3D Culture ◽  
Specific Staining ◽  
3D Culture System ◽  
Calcified Tissue ◽  
Decellularized Scaffolds ◽  
Cellular Markers ◽  
Rat Calvarial Defect

AbstractA three-dimensional (3D) culture system that closely replicates the in vivo microenvironment of calcifying osteoid is essential for in vitro cultivation of bone-like material. In this regard, the 3D cellulose constructs of plants may well serve as scaffolds to promote growth and differentiation of osteoblasts in culture. Our aim in this study was to generate bone-like tissue by seeding pluripotent stem cells (hiPSCs), stimulated to differentiate as osteoblasts in culture, onto the decellularised scaffolds of various plants. We then assessed expression levels of pertinent cellular markers and degrees of calcium-specific staining to gauge technical success. Apple scaffolding bearing regular pores of 300 μm seemed to provide the best construct. The bone-like tissue thus generated was implantable in a rat calvarial defect model where if helped form calcified tissue. Depending on the regularity and sizing of scaffold pores, this approach readily facilitates production of mineralized bone.

scholarly journals The Impact of the Extracellular Matrix Environment on Sost Expression by the MLO-Y4 Osteocyte Cell Line

2022 ◽  
Vol 9 (1) ◽  
pp. 35
Author(s):  
Robert T. Brady ◽  
Fergal J. O’Brien ◽  
David A. Hoey
Keyword(s):  
Extracellular Matrix ◽  
Cell Line ◽  
Three Dimensional ◽  
3D Culture ◽  
Specific Gene ◽  
Collagen Scaffolds ◽  
Sost Gene ◽  
The Impact

Bone is a dynamic organ that can adapt its structure to meet the demands of its biochemical and biophysical environment. Osteocytes form a sensory network throughout the tissue and orchestrate tissue adaptation via the release of soluble factors such as a sclerostin. Osteocyte physiology has traditionally been challenging to investigate due to the uniquely mineralized extracellular matrix (ECM) of bone leading to the development of osteocyte cell lines. Importantly, the most widely researched and utilized osteocyte cell line: the MLO-Y4, is limited by its inability to express sclerostin (Sost gene) in typical in-vitro culture. We theorised that culture in an environment closer to the in vivo osteocyte environment could impact on Sost expression. Therefore, this study investigated the role of composition and dimensionality in directing Sost expression in MLO-Y4 cells using collagen-based ECM analogues. A significant outcome of this study is that MLO-Y4 cells, when cultured on a hydroxyapatite (HA)-containing two-dimensional (2D) film analogue, expressed Sost. Moreover, three-dimensional (3D) culture within HA-containing collagen scaffolds significantly enhanced Sost expression, demonstrating the impact of ECM composition and dimensionality on MLO-Y4 behaviour. Importantly, in this bone mimetic ECM environment, Sost expression was found to be comparable to physiological levels. Lastly, MLO-Y4 cells cultured in these novel conditions responded accordingly to fluid flow stimulation with a decrease in expression. This study therefore presents a novel culture system for the MLO-Y4 osteocyte cell line, ensuring the expression of an important osteocyte specific gene, Sost, overcoming a major limitation of this model.

CFD-Aided Design of a Dynamic Culture System for the Co-Culture of Adherent and Non-Adherent Cells

2009 ◽  
Author(s):  
Marco Cantini ◽  
Gianfranco B. Fiore ◽  
Alberto Redaelli ◽  
Monica Soncini
Keyword(s):  
Culture System ◽  
Three Dimensional ◽  
3D Culture ◽  
Packed Bed ◽  
High Dose Chemotherapy ◽  
Haematopoietic Stem Cell ◽  
High Dose ◽  
3D Culture System ◽  
In Vitro Expansion

Haematopoietic stem cell (HSC) transplantation has been widely used to treat patients that have undergone high-dose chemotherapy or radiotherapy for haematological or non-haematological malignancies, and is currently investigated for the treatment of several other pathologic conditions. Nevertheless, present and expected clinical applications are hindered by the shortage of cells available for transplantation. Hence, many researchers have attempted to achieve an in vitro expansion of HSCs, using different experimental set-ups and approaches, which range from traditional static monolayer cultures to three-dimensional (3D) dynamic systems. Specifically, several bioreactor systems have been proposed, including perfusion chambers, stirred, rotating, hollow fiber, and packed bed reactors [1]. Taken together, literature studies suggest that a dynamic 3D culture system may provide superior expansion of HSCs.

scholarly journals 3D-Culture System for Heart Regeneration and Cardiac Medicine

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Nanako Kawaguchi ◽  
Kota Hatta ◽  
Toshio Nakanishi
Keyword(s):  
Regenerative Medicine ◽  
Cell Biology ◽  
3D Culture ◽  
Cardiac Regeneration ◽  
Collagen Scaffolds ◽  
3D Cultures ◽  
Artificial Hearts ◽  
3D Culture System

3D cultures have gained attention in the field of regenerative medicine for their usefulness asin vitromodel of solid tissues. Bottom-up technology to generate artificial tissues or organs is prospective and an attractive approach that will expand as the field of regenerative medicine becomes more translational. We have characterized c-kit positive cardiac stem cells after long-term cultures and established a 3D-nanoculture system using collagen scaffolds. By combining informatics-based studies, including proteomic analyses and microarrays, we sought to generate methods that modeled cardiac regeneration which can ultimately be used to build artificial hearts. Here, we describe the use of biodegradable beads or 3D cultures to study cardiac regeneration. We summarize recent work that demonstrates that, by using a combination of molecular analyses with 3D cultures, it is possible to evaluate concise mechanisms of solid tissue stem cell biology.

3D Culture Modelling: An Emerging Approach for Translational Cancer Research in Sarcomas

2020 ◽  
Vol 27 (29) ◽  
pp. 4778-4788 ◽  
Author(s):  
Victoria Heredia-Soto ◽  
Andrés Redondo ◽  
José Juan Pozo Kreilinger ◽  
Virginia Martínez-Marín ◽  
Alberto Berjón ◽  
...  
Keyword(s):  
High Throughput Screening ◽  
Cancer Biology ◽  
Soft Tissues ◽  
Three Dimensional ◽  
3D Culture ◽  
Resistance Mechanisms ◽  
In Vitro Models ◽  
Tumour Spheroids ◽  
Current Therapies

Sarcomas are tumours of mesenchymal origin, which can arise in bone or soft tissues. They are rare but frequently quite aggressive and with a poor outcome. New approaches are needed to characterise these tumours and their resistance mechanisms to current therapies, responsible for tumour recurrence and treatment failure. This review is focused on the potential of three-dimensional (3D) in vitro models, including multicellular tumour spheroids (MCTS) and organoids, and the latest data about their utility for the study on important properties for tumour development. The use of spheroids as a particularly valuable alternative for compound high throughput screening (HTS) in different areas of cancer biology is also discussed, which enables the identification of new therapeutic opportunities in commonly resistant tumours.

scholarly journals The Revolutionary Roads to Study Cell–Cell Interactions in 3D In Vitro Pancreatic Cancer Models

Cancers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 930
Author(s):  
Donatella Delle Cave ◽  
Riccardo Rizzo ◽  
Bruno Sainz ◽  
Giuseppe Gigli ◽  
Loretta L. del Mercato ◽  
...  
Keyword(s):  
Pancreatic Cancer ◽  
Therapeutic Response ◽  
Three Dimensional ◽  
Cellular Models ◽  
Common Cancer ◽  
Cancer Models ◽  
Anti Cancer ◽  
Tumor Environment

Pancreatic cancer, the fourth most common cancer worldwide, shows a highly unsuccessful therapeutic response. In the last 10 years, neither important advancements nor new therapeutic strategies have significantly impacted patient survival, highlighting the need to pursue new avenues for drug development discovery and design. Advanced cellular models, resembling as much as possible the original in vivo tumor environment, may be more successful in predicting the efficacy of future anti-cancer candidates in clinical trials. In this review, we discuss novel bioengineered platforms for anticancer drug discovery in pancreatic cancer, from traditional two-dimensional models to innovative three-dimensional ones.

Sign in / Sign up

Export Citation Format

Share Document