scholarly journals The Design of MnOx Based Catalyst in Post-Plasma Catalysis Configuration for Toluene Abatement

Catalysts ◽  
2018 ◽  
Vol 8 (2) ◽  
pp. 91 ◽  
Author(s):  
Zhiping Ye ◽  
Jean-Marc Giraudon ◽  
Nathalie De Geyter ◽  
Rino Morent ◽  
Jean-François Lamonier

This review provides an overview of our present state of knowledge using manganese oxide (MnOx)-based catalysts for toluene abatement in PPC (Post plasma-catalysis) configuration. The context of this study is concisely sum-up. After briefly screening the main depollution methods, the principles of PPC are exposed based on the coupling of two mature technologies such as NTP (Non thermal plasma) and catalysis. In that respect, the presentation of the abundant manganese oxides will be firstly given. Then in a second step the main features of MnOx allowing better performances in the reactions expected to occur in the abatement of toluene in PPC process are reviewed including ozone decomposition, toluene ozonation, CO oxidation and toluene total oxidation. Finally, in a last part the current status of the applications of PPC using MnOx on toluene abatement are discussed. In a first step, the selected variables of the hybrid process related to the experimental conditions of toluene abatement in air are identified. The selected variables are those expected to play a role in the performances of PPC system towards toluene abatement. Then the descriptors linked to the performances of the hybrid process in terms of efficiency are given and the effects of the variables on the experimental outcomes (descriptors) are discussed. The review would serve as a reference guide for the optimization of the PPC process using MnOx-based oxides for toluene abatement.

2018 ◽  
Vol 223 ◽  
pp. 154-166 ◽  
Author(s):  
Z. Ye ◽  
J.-M. Giraudon ◽  
N. Nuns ◽  
P. Simon ◽  
N. De Geyter ◽  
...  

2019 ◽  
Vol 26 (8) ◽  
pp. 8237-8247 ◽  
Author(s):  
Hao Guo ◽  
Xin Liu ◽  
Hajime Hojo ◽  
Xin Yao ◽  
Hisahiro Einaga ◽  
...  

Catalysts ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 946
Author(s):  
Grêce Abdallah ◽  
Jean-Marc Giraudon ◽  
Rim Bitar ◽  
Nathalie De Geyter ◽  
Rino Morent ◽  
...  

Trichloroethylene (TCE) removal was investigated in a post-plasma catalysis (PPC) configuration in nearly dry air (RH = 0.7%) and moist air (RH = 15%), using, for non-thermal plasma (NTP), a 10-pin-to-plate negative DC corona discharge and, for PPC, Ce0.01Mn as a catalyst, calcined at 400 °C (Ce0.01Mn-400) or treated with nitric acid (Ce0.01Mn-AT). One of the key points was to take advantage of the ozone emitted from NTP as a potential source of active oxygen species for further oxidation, at a very low temperature (100 °C), of untreated TCE and of potential gaseous hazardous by-products from the NTP. The plasma-assisted Ce0.01Mn-AT catalyst presented the best CO2 yield in dry air, with minimization of the formation of gaseous chlorinated by-products. This result was attributed to the high level of oxygen vacancies with a higher amount of Mn3+, improved specific surface area and strong surface acidity. These features also allow the promotion of ozone decomposition efficiency. Both catalysts exhibited good stability towards chlorine. Ce0.01Mn-AT tested in moist air (RH = 15%) showed good stability as a function of time, indicating good water tolerance also.


2011 ◽  
Vol 176 (1) ◽  
pp. 413-416 ◽  
Author(s):  
Anna Bialas ◽  
Paula Niebrzydowska ◽  
Barbara Dudek ◽  
Zofia Piwowarska ◽  
Lucjan Chmielarz ◽  
...  

Author(s):  
A. M. Vandenbroucke ◽  
R. Morent ◽  
N. De Geyter ◽  
C. Leys

AbstractThe aim of this paper is to give a review of the research on the decomposition of trichloroethylene (TCE), a common industrial solvent, with combined use of non-thermal plasma and heterogeneous catalysis, i.e. plasma-catalysis. This air purification technique has been investigated over the last decade in an effort to overcome the disadvantages of non-thermal plasma treatment of waste air containing volatile organic compounds (VOCs). Some examples of different plasma technologies used for plasma-catalysis are given. These include the dielectric barrier discharge, the pulsed corona discharge and the atmospheric pressure glow discharge. In a plasma-catalytic hybrid system the catalyst can either be located in the discharge region or downstream of the plasma reactor. The mechanisms that drive both configurations are briefly discussed, followed by an extended literature overview of the removal of TCE with plasma-catalysis.


2021 ◽  
Author(s):  
Jian Chen ◽  
Chentao Fang ◽  
Dandan Li ◽  
Xufang Wang ◽  
Yuejuan Wang ◽  
...  

A series of MnOx catalysts supported by carbon sphere were prepared by calcining mixtures of manganese acetate and carbon spheres under nitrogen atmosphere, and their performances for ozone decomposition under...


2022 ◽  
Vol 116 ◽  
pp. 114-124
Author(s):  
Xiao Chen ◽  
Yong Wang ◽  
Jianyu Li ◽  
Zhongheng Hu ◽  
Ying Zhou ◽  
...  

2019 ◽  
Vol 9 (15) ◽  
pp. 4036-4046 ◽  
Author(s):  
Jian Ji ◽  
Yang Fang ◽  
Linsong He ◽  
Haibao Huang

MnOx–CNT nanocomposites are efficient towards ozone decomposition owing to the electron transfer from the CNTs to MnOx that facilitates the activation of ozone.


2018 ◽  
Vol 8 (4) ◽  
pp. 936-954 ◽  
Author(s):  
Xinxin Feng ◽  
Hongxia Liu ◽  
Chi He ◽  
Zhenxing Shen ◽  
Taobo Wang

Non-thermal plasma catalysis with high efficiency, high by-product selectivity and superior carbon balance is one of the most promising technologies in the control of volatile organic compounds (VOCs).


Sign in / Sign up

Export Citation Format

Share Document