scholarly journals Acid/Base-Treated Activated Carbon Catalysts for the Low-Temperature Endothermic Cracking of N-Dodecane with Applications in Hypersonic Vehicle Heat Management Systems

Catalysts ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1149
Author(s):  
Kyoung Ho Song ◽  
Soon Kwan Jeong ◽  
Byung Hun Jeong ◽  
Kwan-Young Lee ◽  
Hak Joo Kim
Keyword(s):  
Activated Carbon ◽  
Low Temperature ◽  
Reaction Pathway ◽  
Coke Formation ◽  
Superior Performance ◽  
Light Olefins ◽  
Management Systems ◽  
Acid Base ◽  
Heat Management ◽  
Carbon Catalysts

Hypersonic aircrafts suffer from heat management problems caused by the air friction produced at high speeds. The supercritical catalytic cracking of fuel is endothermic and can be exploited to remove heat from the aircraft surfaces using specially designed heat management systems. Here, we report that an acid/base-treated activated carbon (AC) catalyst shows superior performance to the conventional ZSM-5 catalyst at 4 MPa and 450 °C. Further, under these conditions, coke formation is thermodynamically avoided. Of the prepared catalysts, the AC catalyst treated with NaOH and subsequently with HNO3 (denoted AC-3Na-N) was the most active catalyst, showing the highest selectivity toward light olefins and best heat sink capacity. The acid/base-treated ACs and ZSM-5 catalysts were characterized by scanning transmission electron microscopy, X-ray photoelectron spectroscopy, NH3 temperature-programmed desorption, and Fourier-transform infrared spectroscopy measurements. Characterization reveals the importance of acid strength and density in promoting the cracking reaction pathway to light olefins observed over the acid/base-treated AC catalysts, which show comparable activity at 450 °C to that of the ZSM-5 catalyst operated above 550 °C. The low-temperature activity suppressed coke and aromatic compound (coke precursors) formation. The stability of the acid/base-treated activated carbon catalysts was confirmed over a time-on-stream of 30 min.

scholarly journals Low-temperature complete oxidation of BTX on Pt/activated carbon catalysts

2000 ◽  
Vol 63 (2-4) ◽  
pp. 419-426 ◽  
Author(s):  
Jeffrey Chi-Sheng Wu ◽  
Zhi-An Lin ◽  
Feng-Ming Tsai ◽  
Jen-Wei Pan
Keyword(s):  
Activated Carbon ◽  
Low Temperature ◽  
Complete Oxidation ◽  
Carbon Catalysts

Effect of preparation of iron-infiltrated activated carbon catalysts on nitrogen oxide conversion at low temperature

2014 ◽  
Vol 160-161 ◽  
pp. 641-650 ◽  
Author(s):  
Martin Busch ◽  
Wolfgang Schmidt ◽  
Vadim Migunov ◽  
Andreas Beckel ◽  
Christian Notthoff ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Low Temperature ◽  
Nitrogen Oxide ◽  
Carbon Catalysts ◽  
Oxide Conversion

Regeneration of field-spent activated carbon catalysts for low-temperature selective catalytic reduction of NOx with NH3

2011 ◽  
Vol 174 (1) ◽  
pp. 242-248 ◽  
Author(s):  
Jong-Ki Jeon ◽  
Hyeonjoo Kim ◽  
Young-Kwon Park ◽  
Charles H.F. Peden ◽  
Do Heui Kim
Keyword(s):  
Activated Carbon ◽  
Low Temperature ◽  
Selective Catalytic Reduction ◽  
Catalytic Reduction ◽  
Reduction Of Nox ◽  
Carbon Catalysts

Life Time Improvement of Hierarchically Structured SAPO-34 Nanocatalyst in MTO Reaction via Applying Clinoptilolite, Investigating of Composite Design via RSM

2020 ◽  
Vol 23 ◽  
Author(s):  
Reza Yazdanpanah ◽  
Eshagh Moradiyan ◽  
Rouein Halladj ◽  
Sima Askari
Keyword(s):  
Surface Area ◽  
Natural Zeolite ◽  
Coke Formation ◽  
Life Time ◽  
Weight Percent ◽  
Light Olefins ◽  
Bet Surface Area ◽  
Relative Crystallinity ◽  
Mto Reaction ◽  
The Common

Aim and Objective: The research focuses on recent progress in the production of light olefins. Hence, the common catalyst of the reaction (SAPO-34) deactivates quickly because of coke formation, we reorganized the mechanism combining SAPO-34 with a natural zeolite in order to delay the deactivation time. Materials and Methods: The synthesis of nanocomposite catalyst was conducted hydrothermally using experimental design. Firstly, Clinoptilolite was modified using nitric acid in order to achieve nano scaled material. Then, the initial gel of the SAPO-34 was prepared using DEA, aluminum isopropoxide, phosphoric acid and TEOS as the organic template, sources of Aluminum, Phosphor, and Silicate, respectively. Finally, the modified zeolite was combined with SAPO-34's gel. Results: 20 different catalysts due to D-Optimal design were synthesized and the nanocomposite with 50 weight percent of SAPO-34, 4 hours Crystallization and early Clinoptilolite precipitation showed the highest relative crystallinity, partly high BET surface area and hierarchical structure. Conclusion: Different analysis illustrated the existence of both components. The most important property alteration of nanocomposite was the increment of pore mean diameters and reduction in pore volumes in comparison with free SAPO-34. Due to low price of Clinoptilolite, the new catalyst develops the economy of the process. Using this composite, according to formation of multi-sized pores located hierarchically on the surface of the catalyst and increased surface area, significant amounts of Ethylene and Propylene, in comparison with free SAPO-34, were produced, as well as deactivation time that was improved.

scholarly journals Pretreatment of Switchgrass for Production of Glucose via Sulfonic Acid-Impregnated Activated Carbon

Processes ◽  
2021 ◽  
Vol 9 (3) ◽  
pp. 504
Author(s):  
Yane Ansanay ◽  
Praveen Kolar ◽  
Ratna Sharma-Shivappa ◽  
Jay Cheng ◽  
Consuelo Arellano
Keyword(s):  
Activated Carbon ◽  
Sulfonic Acid ◽  
Solid Acid ◽  
Methanesulfonic Acid ◽  
Biofuel Production ◽  
Acid Catalysts ◽  
Effects Of Temperature ◽  
Carbon Catalysts ◽  
Hydrolysis Of

In the present research, activated carbon-supported sulfonic acid catalysts were synthesized and tested as pretreatment agents for the conversion of switchgrass into glucose. The catalysts were synthesized by reacting sulfuric acid, methanesulfonic acid, and p-toluenesulfonic acid with activated carbon. The characterization of catalysts suggested an increase in surface acidities, while surface area and pore volumes decreased because of sulfonation. Batch experiments were performed in 125 mL serum bottles to investigate the effects of temperature (30, 60, and 90 °C), reaction time (90 and 120 min) on the yields of glucose. Enzymatic hydrolysis of pretreated switchgrass using Ctec2 yielded up to 57.13% glucose. Durability tests indicated that sulfonic solid-impregnated carbon catalysts were able to maintain activity even after three cycles. From the results obtained, the solid acid catalysts appear to serve as effective pretreatment agents and can potentially reduce the use of conventional liquid acids and bases in biomass-into-biofuel production.

Ethanol conversion over Ga2O3-ZrO2 solid solution: empirical evidences of the reaction pathway, the surface acid–base property, and role of isolated gallium ion

2021 ◽  
Author(s):  
Takashi Yamamoto ◽  
Akihito Kurimoto ◽  
Riona Sato ◽  
Shoki Katada ◽  
Hirotaka Mine ◽  
...  
Keyword(s):  
Solid Solution ◽  
Reaction Pathway ◽  
Ethanol Conversion ◽  
Acid Base ◽  
Base Property ◽  
Temperature Range ◽  
Acid Base Property

Ethanol conversion by Ga2O3-ZrO2 solid solution was examined in the temperature range 573–773 K, and acetone/isobutene formation was confirmed under cofeeding of H2O vapor. The reaction pathway was empirically investigated...

Sign in / Sign up

Export Citation Format

Share Document