scholarly journals Annealing Temperature-Dependent Effects of Fe-Loading on the Visible Light-Driven Photocatalytic Activity of Rutile TiO2 Nanoparticles and Their Applicability for Air Purification

Catalysts ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 739
Author(s):  
Soong Yeon Kim ◽  
Shahid Saqlain ◽  
Byeong Jun Cha ◽  
Shufang Zhao ◽  
Hyun Ook Seo ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Annealing Temperature ◽  
Separation Efficiency ◽  
Small Scale ◽  
Production Scale ◽  
Rutile Tio2 ◽  
Fe Oxide ◽  
Metal Support Interaction

Commercial rutile TiO2 particles (200–300 nm) were modified by the temperature-regulated chemical vapor deposition (tr-CVD) of Fe-oxide and subsequent annealing at various temperatures (300~750 °C). As a result of the modification, the photocatalytic activity of the TiO2 regarding acetaldehyde removal under visible light was enhanced, and the enhancement effects were dependent on the annealing temperature. Specifically, the enhancement effects of the modification were most pronounced when Fe-TiO2 was annealed at 375 °C, whereas the effects were significantly reduced by annealing at higher temperatures (525 and 750 °C). The analytical results with various techniques, including two surface-sensitive methods (XPS (X-ray photoelectron spectroscopy) and TOF-SIMS (time of fight-secondary ion mass spectrometry)), revealed that the stronger metal support interaction between TiO2 and the loaded Fe-oxide at high temperature (>375 °C) resulted in the decreased charge separation efficiency and photocatalytic activity of the Fe-TiO2 under light irradiation. The production scale for the Fe-TiO2 photocatalysts can be easily increased (from 200 g to 8 kg per the unit process) by upsizing the reactor volume. The mass-produced samples exhibited similar activity to the samples produced at small scale, and they were photocatalytically active after being spread on a cement block (stainless steel plate) using a surface hardening agent (paint), showing the high applicability in real applications.

Facile Synthesis of Fluorine Doped Graphitic Carbon Nitride with Enhanced Visible Light Photocatalytic Activity

NANO ◽  
2016 ◽  
Vol 11 (12) ◽  
pp. 1650137 ◽  
Author(s):  
Mengqiu Xu ◽  
Bo Chai ◽  
Juntao Yan ◽  
Haibo Wang ◽  
Zhandong Ren ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Carbon Nitride ◽  
Separation Efficiency ◽  
Nitrogen Adsorption ◽  
Active Species ◽  
Graphitic Carbon ◽  
Graphitic Carbon Nitride ◽  
X Ray

Fluorine doped graphitic carbon nitride (g-C3N4) was successfully synthesized by a convenient co-polycondensation of urea and ammonium fluoride (NH4F) mixtures, and characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectra (FTIR), UV-Vis diffuse reflectance absorption spectra (UV-DRS), nitrogen adsorption–desorption, photoelectrochemical measurement and photoluminescence (PL) spectra. The photocatalytic activities of fluorine doped g-C3N4 samples were evaluated by the degradation of Rhodamine B (RhB) solution under visible light irradiation. The results showed that the fluorine doped g-C3N4 had a better photocatalytic activity than that of undoped g-C3N4, which was attributed to the favorable textural, optical and electronic properties derived from the fluorine atoms substituting nitrogen atoms of g-C3N4 frameworks. The photoelectrochemical measurements confirmed that the charges separation efficiency was improved by fluorine doping g-C3N4. Moreover, the tests of radical scavengers demonstrated that the holes (h[Formula: see text]) and superoxide radicals ([Formula: see text]O[Formula: see text]) were the main active species for the degradation of RhB.

Preparation of Visible-Light-Responsive TiO2-xNx Photocatalyst by a Very Simple Method

2011 ◽  
Vol 383-390 ◽  
pp. 3188-3191
Author(s):  
Han Jie Huang ◽  
Wen Long She ◽  
Ling Wen Yang ◽  
Hai Peng Huang
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflection ◽  
Ammonia Solution ◽  
Reflection Spectra ◽  
X Ray Diffraction ◽  
Simple Method ◽  
X Ray ◽  
Light Excitation

A visible-light-responsive TiO2-xNx photocatalyst was prepared by a very simple method. Ammonia solution was used as nitrogen resource in this paper. The TiO2-xNx photocatalyst was characterized by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), UV-Vis diffuse reflection spectra (DRS), and X-ray photoelectron spectroscopy (XPS). The ethylene was selected as a target pollutant under visible light excitation to evaluate the activity of this photocatalyst. The new prepared TiO2-xNx photocatalyst with strong photocatalytic activity under visible light irradiation was demonstrated in the experiment.

scholarly journals Facile Preparation of Efficient WO3Photocatalysts Based on Surface Modification

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Min Liu ◽  
Hongmei Li ◽  
Yangsu Zeng
Keyword(s):  
Photocatalytic Activity ◽  
Surface Modification ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Impregnation Method ◽  
Light Spectra ◽  
Simple Strategy ◽  
Visible Light Active ◽  
Efficient Charge ◽  
Surface Modified

Tungsten trioxide (WO3) was surface modified with Cu(II) nanoclusters and titanium dioxide (TiO2) nanopowders by using a simple impregnation method followed by a physical combining method. The obtained nanocomposites were studied by scanning electron microscope, X-ray photoelectron spectroscopy spectra, UV-visible light spectra, and photoluminescence, respectively. Although the photocatalytic activity of WO3was negligible under visible light irradiation, the visible light photocatalytic activity of WO3was drastically enhanced by surface modification of Cu(II) nanoclusters and TiO2nanopowders. The enhanced photocatalytic activity is due to the efficient charge separation by TiO2and Cu(II) nanoclusters functioning as cocatalysts on the surface. Thus, this simple strategy provides a facile route to prepare efficient visible-light-active photocatalysts for practical application.

scholarly journals Photocatalytic Performance of SiO2/CNOs/TiO2 to Accelerate the Degradation of Rhodamine B under Visible Light

Nanomaterials ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1671 ◽  
Author(s):  
Weike Zhang ◽  
Yanrong Zhang ◽  
Kai Yang ◽  
Yanqing Yang ◽  
Jia Jia ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Rhodamine B ◽  
Photoelectron Spectroscopy ◽  
Degradation Rate ◽  
Photocatalytic Performance ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electronic Microscope

A silicon dioxide/carbon nano onions/titanium dioxide (SiO2/CNOs/TiO2) composite was synthesized by a simple sol-gel method and characterized by the methods of X-ray diffraction (XRD), scanning electronic microscope (SEM), X-ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET), Fourier transform infrared (FTIR), thermogravimetric analysis (TG), differential scanning calorimeter (DSC) and UV-Vis diffuse reflectance spectra (UV-Vis DRS). In this work, the photocatalytic activity of the SiO2/CNOs/TiO2 photocatalyst was assessed by testing the degradation rate of Rhodamine B (RhB) under visible light. The results indicated that the samples exhibited the best photocatalytic activity when the composite consisted of 3% CNOs and the optimum dosage of SiO2/CNOs/TiO2(3%) was 1.5 g/L as evidenced by the highest RhB degradation rate (96%). The SiO2/CNOs/TiO2 composite greatly improved the quantum efficiency of TiO2. This work provides a new option for the modification of subsequent nanocomposite oxide nanoparticles.

scholarly journals Preparation and Characterization of Defective TiO2. The Effect of the Reaction Environment on Titanium Vacancies Formation

Materials ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 2763
Author(s):  
Zuzanna Bielan ◽  
Szymon Dudziak ◽  
Agnieszka Sulowska ◽  
Daniel Pelczarski ◽  
Jacek Ryl ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Hydrothermal Reaction ◽  
High Photocatalytic Activity ◽  
Paramagnetic Resonance ◽  
X Ray ◽  
Light Activity ◽  
Cheap Alternative

Among various methods of improving visible light activity of titanium(IV) oxide, the formation of defects and vacancies (both oxygen and titanium) in the crystal structure of TiO2 is an easy and relatively cheap alternative to improve the photocatalytic activity. In the presented work, visible light active defective TiO2 was obtained by the hydrothermal reaction in the presence of three different oxidizing agents: HIO3, H2O2, and HNO3. Further study on the effect of used oxidant and calcination temperature on the physicochemical and photocatalytic properties of defective TiO2 was performed. Obtained nanostructures were characterized by X-ray diffractometry (XRD), specific surface area (BET) measurements, UV-Vis diffuse reflectance spectroscopy (DR-UV/Vis), photoluminescence spectroscopy (PL), X-ray photoelectron spectroscopy (XPS), and electron paramagnetic resonance (EPR) spectroscopy. Degradation of phenol as a model pollutant was measured in the range of UV-Vis and Vis irradiation, demonstrating a significant increase of photocatalytic activity of defective TiO2 samples above 420 nm, comparing to non-defected TiO2. Correlation of EPR, UV-Vis, PL, and photodegradation results revealed that the optimum concentration of HIO3 to achieve high photocatalytic activity was in the range of 20–50 mol%. Above that dosage, titanium vacancies amount is too high, and the obtained materials’ photoactivity was significantly decreased. Studies on the photocatalytic mechanism using defective TiO2 have also shown that •O2− radical is mainly responsible for pollutant degradation.

scholarly journals Improving the photocatalytic activity of nitrogen-doped surface defect TiO2-x nanobelts for degradation of organic pollutants

2020 ◽  
pp. 174751982093867
Author(s):  
Zhen Zhang ◽  
Shao-dong Qin ◽  
Jing-yun Chen ◽  
Jing Li ◽  
Ai-hua Xing
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Organic Pollutants ◽  
Rhodamine B ◽  
Light Absorption ◽  
Surface Defect ◽  
Separation Efficiency ◽  
Visible Light Absorption ◽  
Nitrogen Doped ◽  
N Doping

The synthesis of surface defect TiO2-x nanobelts with excellent visible light absorption is important to reduce costs, increase stability, and improve photocatalytic activity. In this work, we report that nitrogen-doped surface defect TiO2-x nanobelts are synthesized by annealing pristine TiO2 nanobelts in Ar/H2 (95%/5%) atmosphere followed by subsequent heat treatment in NH3 at various temperatures. The aim is to study the effect of the extent of the N-doping amount in the lattice of TiO2-x nanobelts on light absorption and photocatalytic activity. Considering the increase in organic pollutants in wastewater, the photocatalytic activity is measured by degrading rhodamine B (RhB) dye in water. The results demonstrate that the calcination temperature affects the doping level of N, and the b-TiO2-N550 sample exhibits higher photocatalytic performance than that of other samples under visible-light irradiation for the degradation of rhodamine B, which is up to 96.11%. The enhancement is ascribed to the synergistic effect of N-doping and self-doping oxygen vacancy (which extend the visible light absorption) and the separation efficiency of photogenerated carriers, which improves the photocatalytic activity.

Photocatalysis Reactivity in the Visible Light of B-Doped TiO2 Nanotube Arrays

2013 ◽  
Vol 860-863 ◽  
pp. 907-910
Author(s):  
Xiao Xia Lin ◽  
Jia Liu ◽  
De Gang Fu
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectrum ◽  
Nanotube Arrays ◽  
X Ray Diffraction ◽  
Degradation Model ◽  
X Ray ◽  
Light Region

B-doped TiO2nanotube arrays (B-TNTs) were synthesized by anodization method combined with dip-calcination technique. The physicochemical properties and surface morphology were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and UV-Vis diffuse reflectance spectrum (DRS). Methyl blue (MB) solution was utilized as the degradation model to evaluate the photocatalytic activity of B-TNTs under visible light irradiation. The results show B-TNTs shifts the absorption edge of TiO2nanotube arrays to the visible light region and B-TNTs displays higher photocatalytic activity compared with undoped TNTs.

Sign in / Sign up

Export Citation Format

Share Document