scholarly journals Mechanical and Electrical Properties of Elastomer Nanocomposites Based on Different Carbon Nanomaterials

2017 ◽  
Vol 3 (4) ◽  
pp. 10 ◽  
Author(s):  
Liliane Bokobza
2020 ◽  
Vol 28 ◽  
pp. 1694-1701
Author(s):  
Angeliki-Eirini Dimou ◽  
Christina-Margarita Charalampidou ◽  
Zoi S. Metaxa ◽  
Stavros K. Kourkoulis ◽  
Ioannis Karatasios ◽  
...  

2010 ◽  
Vol 35 (1) ◽  
pp. 59-69 ◽  
Author(s):  
Fares Serradj ◽  
Rebal Guemini ◽  
Hichem Farh ◽  
Karim Djemmal

2015 ◽  
Vol 57 (11) ◽  
pp. 1485-1490 ◽  
Author(s):  
S. A. Vorozhtsov ◽  
А. P. Khrustalyov ◽  
D. G. Eskin ◽  
S. N. Кulkov ◽  
N. Alba-Baena

2020 ◽  
Vol 9 (1) ◽  
pp. 1183-1191
Author(s):  
Xinlin Li ◽  
Rixuan Wang ◽  
Leilei Wang ◽  
Aizhen Li ◽  
Xiaowu Tang ◽  
...  

AbstractDevelopment of stretchable wearable devices requires essential materials with high level of mechanical and electrical properties as well as scalability. Recently, silicone rubber-based elastic polymers with incorporated conductive fillers (metal particles, carbon nanomaterials, etc.) have been shown to the most promising materials for enabling both high electrical performance and stretchability, but the technology to make materials in scalable fabrication is still lacking. Here, we propose a facile method for fabricating a wearable device by directly coating essential electrical material on fabrics. The optimized material is implemented by the noncovalent association of multiwalled carbon nanotube (MWCNT), carbon black (CB), and silicon rubber (SR). The e-textile sensor has the highest gauge factor (GF) up to 34.38 when subjected to 40% strain for 5,000 cycles, without any degradation. In particular, the fabric sensor is fully operational even after being immersed in water for 10 days or stirred at room temperature for 8 hours. Our study provides a general platform for incorporating other stretchable elastic materials, enabling the future development of the smart clothing manufacturing.


Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4374
Author(s):  
Wu-Jian Long ◽  
Xuanhan Zhang ◽  
Biqin Dong ◽  
Yuan Fang ◽  
Tao-Hua Ye ◽  
...  

Reduced graphene oxide (rGO) has been widely used to modify the mechanical performance of alkali activated slag composites (AASC); however, the mechanism is still unclear and the electrical properties of rGO reinforced AASC are unknown. Here, the rheological, mechanical, and electrical properties of the AASC containing rGO nanosheets (0, 0.1, 0.2, and 0.3 wt.%) are investigated. Results showed that rGO nanosheets addition can significantly improve the yield stress, plastic viscosity, thixotropy, and compressive strength of the AASC. The addition of 0.3 wt.% rGO nanosheets increased the stress, viscosity, thixotropy, and strength by 186.77 times, 3.68 times, 15.15 times, and 21.02%, respectively. As for electrical properties, the impedance of the AASC increased when the rGO content was less than 0.2 wt.% but decreased with the increasing dosage. In contrast, the dielectric constant and electrical conductivity of the AASC containing rGO nanosheets decreased and then increased, which can be attributed to the abundant interlayer water and the increasing structural defects as the storage sites for charge carriers, respectively. In addition, the effect of graphene oxide (GO) on the AASC is also studied and the results indicated that the agglomeration of GO nanosheets largely inhibited the application of it in the AASC, even with a small dosage.


Sign in / Sign up

Export Citation Format

Share Document