scholarly journals Daylight Performance of a Translucent Textile Membrane Roof with Thermal Insulation

Buildings ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 118 ◽  
Author(s):  
Daniel Gürlich ◽  
Amando Reber ◽  
Andreas Biesinger ◽  
Ursula Eicker
Keyword(s):  
Thermal Insulation ◽  
Energy Demand ◽  
Energy Performance ◽  
Electricity Demand ◽  
Light Transmittance ◽  
Artificial Lighting ◽  
Lack Of Information ◽  
Dimming Control ◽  
Final Energy Demand ◽  
Daylight Performance

Daylight usage in buildings improves visual comfort and lowers the final energy demand for artificial lighting. The question that always occurs is how much conservation can be achieved? New or rare materials and constructions have a lack of information about their application. Therefore, the current investigation quantifies the daylight and energy performance of a rare multi-layer textile membrane roof. A translucent, thermal insulation with a glass fibre fleece between the two roof membranes combines daylight usage and heating demand reduction. A sports hall built in 2017 is used as a case study building with 2300 m2 membrane roof surface. The optical properties of the roof construction were measured with a total visual light transmittance τv of 0.72% for a clean surface. A climate-based annual daylight modelling delivers daylight indicators for different construction scenarios. The results show that, in comparison to only one glass façade, the additional translucent and thermally insulated membrane roof construction increases the annual daylight autonomy (DA700) from 0% to 1.5% and the continuous DA700 from 15% to 38%. In the roof-covered areas of the sport field, this results in a 30% reduction of the electricity demand for artificial lighting from 19.7 kWhel/m2/a to 13.8 kWhel/m2/a, when a dimming control is used. The study also found that the influence of the soiling of one layer decreases its light transmittance by a factor 0.81. Two soiled layers lower τv by a factor of 0.66 to 0.47%. This increases the electricity demand for lighting by only 12%. The results should be very valuable as a comparison and benchmark for planners and future buildings of a similar type.

scholarly journals Daylight Performance of a Translucent Textile Membrane Roof with Thermal Insulation

2018 ◽  
Author(s):  
Daniel Gürlich ◽  
Amando Reber ◽  
Andreas Biesinger ◽  
Ursula Eicker
Keyword(s):  
Thermal Insulation ◽  
Energy Demand ◽  
Light Transmittance ◽  
The Novel ◽  
Artificial Lighting ◽  
Lack Of Information ◽  
Demand Reduction ◽  
Final Energy Demand ◽  
Daylight Performance

Daylight usage in buildings improves visual comfort and lowers the final energy demand for artificial lighting. The question always occurs: how much conservation can you achieve? New upcoming or rare materials and constructions have a lack of information about their application. Therefore, the current work investigates the daylight performance of a multi-layer textile membrane roof with 2 300 m² on top of a sports hall. A translucent, thermal insulation with a glass fibre fleece between the roof membranes combines daylight usage and heating demand reduction. A sports hall with built year 2017 is selected as the case study building. The optical properties of the roof construction are measured. The (visual) light transmittance amounts to 0.72 % with a clean surface. An accordingly parametrized climate-based annual daylight modeling delivers daylight indicators for different construction scenarios. The results show that in comparison to only one glass facade, the additional translucent and thermally insulated membrane construction increases the annual daylight autonomy700/ continuous DA700 from 0/ 15 % to 1.5/ 38 %. In the roof covered areas of the sport field, this results in a reduction from 19.7 to 13.8 kWhel/m²/a electricity for the artificial lighting with dim control (30 % savings). Also, the influence of soiling on the light transmittance was determined with a relevant reduction of one layer about a factor 0.81. The novel results are of great value as a comparison and benchmark for planners and future buildings of similar type.

scholarly journals Energy Performance Assessment of Innovative Building Solutions Coming from Construction and Demolition Waste Materials

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1226
Author(s):  
Beatriz Fraga-De Cal ◽  
Antonio Garrido-Marijuan ◽  
Olaia Eguiarte ◽  
Beñat Arregi ◽  
Ander Romero-Amorrortu ◽  
...  
Keyword(s):  
Thermal Insulation ◽  
Energy Demand ◽  
Energy Savings ◽  
Flow Analysis ◽  
Weather Conditions ◽  
Energy Performance ◽  
Construction And Demolition Waste ◽  
The European Union ◽  
Demolition Waste ◽  
The Impact

Prefabricated solutions incorporating thermal insulation are increasingly adopted as an energy conservation measure for building renovation. The InnoWEE European project developed three technologies from Construction and Demolition Waste (CDW) materials through a manufacturing process that supports the circular economy strategy of the European Union. Two of them consisted of geopolymer panels incorporated into an External Thermal Insulation Composite System (ETICS) and a ventilated façade. This study evaluates their thermal performance by means of monitoring data from three pilot case studies in Greece, Italy, and Romania, and calibrated building simulation models enabling the reliable prediction of energy savings in different climates and use scenarios. Results showed a reduction in energy demand for all demo buildings, with annual energy savings up to 25% after placing the novel insulation solutions. However, savings are highly dependent on weather conditions since the panels affect cooling and heating loads differently. Finally, a parametric assessment is performed to assess the impact of insulation thickness through an energy performance prediction and a cash flow analysis.

Financial Viability of Energy Conservation Using Natural Light in an Academic Building in Temperate Zone

2016 ◽  
Vol 138 (6) ◽  
Author(s):  
Pooja Sharma ◽  
Dibakar Rakshit
Keyword(s):  
Energy Demand ◽  
Energy Savings ◽  
Energy Requirement ◽  
Luminous Flux ◽  
Light Transmittance ◽  
Natural Light ◽  
New Delhi ◽  
Artificial Lighting ◽  
Flux Level ◽  
Academic Building

The environment of a regularly occupied space can be extensively improved by maximum utilization of natural light/daylight, which is available in abundance. In Indian climate, availability of sufficient day light in both direct and diffused form of radiation can lead to reduction in dependency on artificial lighting thus, decreasing energy demand for artificial lighting system. In this study, an institutional building in New Delhi, India is analyzed for its daylighting characteristics. The academic block of a building comprising all categories of regularly spaces is modeled and simulated using Integrated environmental solutions - virtual environment (IES VE). The objective is to analyze the extent of penetration of natural light into these spaces of the building for reducing energy requirement for artificial lighting by studying a room, which performs the worst as per present case parameters. The conclusion puts forth the optimal solutions for utilizing maximum day light in a work space, complying with standards set forth by building construction council by utilizing the principles for increasing luminous flux level through visual light transmittance, window-to-wall ratio, and controlled usage of artificial lighting. Considering all these factors in the analysis, energy savings and carbon mitigation due to these savings in regularly occupied spaces are finally evaluated.

scholarly journals Heating, Cooling, and Lighting Energy Demand Simulation Analysis of Kinetic Shading Devices with Automatic Dimming Control for Asian Countries

2019 ◽  
Vol 11 (5) ◽  
pp. 1253 ◽  
Author(s):  
Byungyun Lee
Keyword(s):  
Total Energy ◽  
Energy Saving ◽  
Energy Demand ◽  
Energy Performance ◽  
Optimal Operation ◽  
Optimal Position ◽  
Energy Demands ◽  
Lighting Energy ◽  
Dimming Control ◽  
Shading Devices

Kinetic shading devices have recently been introduced for energy-saving and for their innovative appearance. Quantifiable research on kinetic operation systems is necessary to evaluate their applicability in a specific region. This study developed a theoretical methodology for producing an optimal positioning algorithm targeting minimizing total energy demands of kinetic shading devices; the control algorithms for hourly operation were tested through a combined analysis framework of energy performance simulations and spreadsheet analysis. Two common types of external shading devices, vertical-folding and horizontal-rotating types, were simulated in three Asian cities with different climate conditions. Automatic kinetic operation with a consequential dimming control was simulated on the east, south and west facade of an office building, selecting the optimal position every hour based on total energy demand for heating, cooling, and lighting. Comparative simulation analyses for kinetic operation and fixed shading demonstrated that the energy saving potential of fixed shading was greater than that of kinetic operation shading. Kinetic operation was the most applicable in Seoul, where seasonal optimal operation was required for both types of kinetic shadings. In Abu Dhabi and Hanoi, cooling and lighting energy demands were balanced every hour through kinetic operation. Rotating-type kinetic operation in these two regions resulted in better energy-saving performance. The operation frequency pattern of rotating-type kinetic shading provided more active operation and consequent outperformance over the folding-type.

scholarly journals Energy performance of building heating - theory and reality on the example of educational buildings

2018 ◽  
Vol 174 ◽  
pp. 01018
Author(s):  
Piotr Lis ◽  
Anna Lis
Keyword(s):  
Energy Consumption ◽  
Energy Demand ◽  
Energy Performance ◽  
Final Energy ◽  
Theoretical Assumptions ◽  
Educational Buildings ◽  
Final Energy Demand ◽  
Actual Energy Consumption

The calculative methods, which are adopted in various fields of engineering, are usually a certain kind of theoretical approximation of reality. The deviations from a full consistency of actual conditions and theoretical assumptions occur also in case of building heating. This work presents the selected results of examinations connected with an annual energy consumption CH and annual final energy demand Qk,H for heating and conducted on the group of educational buildings. The presented analysis and its results regard the group including 46 of 50 educational buildings, which form a municipal group of the buildings of this type. The purpose of presented analysis was to examine the influence of possible occurrence and level of differences between the annual energy consumption CH and annual final energy demand Qk,H for heating of examined buildings. The realization of this purpose is the basis for further research and analysis aimed at determining the dominant reasons of mentioned differences, establishing their level and propose a calculative method for reducing the differences between the values "picturing" the thermal needs of educational buildings in actual (energy consumption CH) and theoretical (final energy demand Qk,H) conditions.

scholarly journals A Supervisory Control Strategy for Improving Energy Efficiency of Artificial Lighting Systems in Greenhouses

Energies ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 202
Author(s):  
Gianluca Serale ◽  
Luca Gnoli ◽  
Emanuele Giraudo ◽  
Enrico Fabrizio
Keyword(s):  
Control Strategy ◽  
Light Emitting Diode ◽  
Cost Savings ◽  
Energy Performance ◽  
Lighting System ◽  
Light Emitting ◽  
Artificial Lighting ◽  
Lighting Control ◽  
Lighting Systems ◽  
Power Densities

Artificial lighting systems are used in commercial greenhouses to ensure year-round yields. Current Light Emitting Diode (LED) technologies improved the system efficiency. Nevertheless, having artificial lighting systems extended for hectares with power densities over 50W/m2 causes energy and power demand of greenhouses to be really significant. The present paper introduces an innovative supervisory and predictive control strategy to optimize the energy performance of the artificial lights of greenhouses. The controller has been implemented in a multi-span plastic greenhouse located in North Italy. The proposed control strategy has been tested on a greenhouse of 1 hectare with a lighting system with a nominal power density of 50 Wm−2 requiring an overall power supply of 1 MW for a period of 80 days. The results have been compared with the data coming from another greenhouse of 1 hectare in the same conditions implementing a state-of-the-art strategy for artificial lighting control. Results outlines that potential 19.4% cost savings are achievable. Moreover, the algorithm can be used to transform the greenhouse in a viable source of energy flexibility for grid reliability.

scholarly journals Control Strategies for Daylight and Artificial Lighting in Office Buildings—A Bibliometrically Assisted Review

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3852
Author(s):  
Daniel Plörer ◽  
Sascha Hammes ◽  
Martin Hauer ◽  
Vincent van Karsbergen ◽  
Rainer Pfluger
Keyword(s):  
Energy Efficiency ◽  
Energy Demand ◽  
Control Strategies ◽  
Significant Proportion ◽  
Decisive Role ◽  
Future Trend ◽  
Office Buildings ◽  
Total Energy Consumption ◽  
Integral Control ◽  
Artificial Lighting

A significant proportion of the total energy consumption in office buildings is attributable to lighting. Enhancements in energy efficiency are currently achieved through strategies to reduce artificial lighting by intelligent daylight utilization. Control strategies in the field of daylighting and artificial lighting are mostly rule-based and focus either on comfort aspects or energy objectives. This paper aims to provide an overview of published scientific literature on enhanced control strategies, in which new control approaches are critically analysed regarding the fulfilment of energy efficiency targets and comfort criteria simultaneously. For this purpose, subject-specific review articles from the period between 2015 and 2020 and their research sources from as far back as 1978 are analysed. Results show clearly that building controls increasingly need to address multiple trades to achieve a maximum improvement in user comfort and energy efficiency. User acceptance can be highlighted as a decisive factor in achieving targeted system efficiencies, which are highly determined by the ability of active user interaction in the automatic control system. The future trend is moving towards decentralized control concepts including appropriate occupancy detection and space zoning. Simulation-based controls and learning systems are identified as appropriate methods that can play a decisive role in reducing building energy demand through integral control concepts.

scholarly journals Experimental Data and Simulations of Performance and Thermal Comfort in a Typical Mediterranean House

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3311
Author(s):  
Víctor Pérez-Andreu ◽  
Carolina Aparicio-Fernández ◽  
José-Luis Vivancos ◽  
Javier Cárcel-Carrasco
Keyword(s):  
Energy Efficiency ◽  
Thermal Comfort ◽  
Energy Demand ◽  
Natural Ventilation ◽  
Thermal Characterization ◽  
Energy Performance ◽  
Building Stock ◽  
Energy Demands ◽  
Dwelling House ◽  
Account Standard

The number of buildings renovated following the introduction of European energy-efficiency policy represents a small number of buildings in Spain. So, the main Spanish building stock needs an urgent energy renovation. Using passive strategies is essential, and thermal characterization and predictive tests of the energy-efficiency improvements achieving acceptable levels of comfort for their users are urgently necessary. This study analyzes the energy performance and thermal comfort of the users in a typical Mediterranean dwelling house. A transient simulation has been used to acquire the scope of Spanish standards for its energy rehabilitation, taking into account standard comfort conditions. The work is based on thermal monitoring of the building and a numerical validated model developed in TRNSYS. Energy demands for different models have been calculated considering different passive constructive measures combined with real wind site conditions and the behavior of users related to natural ventilation. This methodology has given us the necessary information to decide the best solution in relation to energy demand and facility of implementation. The thermal comfort for different models is not directly related to energy demand and has allowed checking when and where the measures need to be done.

scholarly journals A Fundamental Study on the Development of New Energy Performance Index in Office Buildings

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2064
Author(s):  
Jin-Hee Kim ◽  
Seong-Koo Son ◽  
Gyeong-Seok Choi ◽  
Young-Tag Kim ◽  
Sung-Bum Kim ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Energy Requirement ◽  
Energy Performance ◽  
Office Buildings ◽  
Light Transmittance ◽  
Wall Structure ◽  
Fundamental Study ◽  
Future Studies ◽  
U Value ◽  
The Impact

Recently, there have been significant concerns regarding excessive energy use in office buildings with a large window-to-wall ratio (WWR) because of the curtain wall structure. However, prior research has confirmed that the impact of the window area on energy consumption varies depending on building size. A newly proposed window-to-floor ratio (WFR) correlates better with energy consumption in the building. In this paper, we derived the correlation by analyzing a simulation using EnergyPlus, and the results are as follows. In the case of small buildings, the results of this study showed that the WWR and energy requirement increase proportionally, and the smaller the size is, the higher the energy sensitivity will be. However, results also confirmed that this correlation was not established for buildings approximately 3600 m2 or larger. Nevertheless, from analyzing the correlation between the WFR and the energy requirements, it could be deduced that energy required increased proportionally when the WFR was 0.1 or higher. On the other hand, the correlation between WWR, U-value, solar heat gain coefficient (SHGC), and material property values of windows had little effect on energy when the WWR was 20%, and the highest effect was seen at a WWR of 100%. Further, with an SHGC below 0.3, the energy requirement decreased with an increasing WWR, regardless of U-value. In addition, we confirmed the need for in-depth research on the impact of the windows’ U-value, SHGC, and WWR, and this will be verified through future studies. In future studies on window performance, U-value, SHGC, visible light transmittance (VLT), wall U-value as sensitivity variables, and correlation between WFR and building size will be examined.

scholarly journals A Systematic Literature Review of Multi-Criteria Decision-Making Methods for Sustainable Selection of Insulation Materials in Buildings

2021 ◽  
Vol 13 (2) ◽  
pp. 737
Author(s):  
Indre Siksnelyte-Butkiene ◽  
Dalia Streimikiene ◽  
Tomas Balezentis ◽  
Virgilijus Skulskis
Keyword(s):  
Decision Making ◽  
Literature Review ◽  
Systematic Literature Review ◽  
Energy Demand ◽  
Energy Performance ◽  
Future Research ◽  
Multi Criteria Decision Making ◽  
Insulation Materials ◽  
Advantages And Disadvantages ◽  
Selection Of

The European Commission has recently adopted the Renovation Wave Strategy, aiming at the improvement of the energy performance of buildings. The strategy aims to at least double renovation rates in the next ten years and make sure that renovations lead to higher energy and resource efficiency. The choice of appropriate thermal insulation materials is one of the simplest and, at the same time, the most popular strategies that effectively reduce the energy demand of buildings. Today, the spectrum of insulation materials is quite wide, and each material has its own specific characteristics. It is recognized that the selection of materials is one of the most challenging and difficult steps of a building project. This paper aims to give an in-depth view of existing multi-criteria decision-making (MCDM) applications for the selection of insulation materials and to provide major insights in order to simplify the process of methods and criteria selection for future research. A systematic literature review is performed based on the Search, Appraisal, Synthesis and Analysis (SALSA) framework and the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. In order to determine which MCDM method is the most appropriate for different questions, the main advantages and disadvantages of different methods are provided.

Sign in / Sign up

Export Citation Format

Share Document