scholarly journals Development of Tin Oxide-Based Nanosensors for Electronic Nose Environmental Applications

Biosensors ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 21 ◽  
Author(s):  
Isabel Sayago ◽  
Manuel Aleixandre ◽  
José Pedro Santos
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Low Temperature ◽  
Tin Oxide ◽  
Chemical Sensors ◽  
High Sensitivity ◽  
Silicon Substrates ◽  
Electronic Noses ◽  
Pollutant Detection ◽  
Scanning Electron

Tin oxide nanofibres (NFs) are used as nanosensors in electronic noses. Their performance is compared to that of oxide commercial chemical sensors for pollutant detection. NFs were grown by electrospinning and deposited onto silicon substrates with integrated micro-hotplates. NF morphology was characterized by scanning electron microscopy (SEM). The NFs presented high sensitivity to NO2 at low temperature.

Intracellular structures of rapid frozen biological samples observed by high-resolution low-temperature Scanning Electron Microscopy

1989 ◽  
Vol 47 ◽  
pp. 736-737
Author(s):  
T. Inoué ◽  
H. Koike
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Low Temperature ◽  
Liquid Nitrogen ◽  
Specimen Preparation ◽  
Chemical Fixation ◽  
Brown Adipose ◽  
Critical Point Drying ◽  
Temperature Scanning ◽  
Scanning Electron

Low temperature scanning electron microscopy (LTSEM) is useful to avoid artifacts such as deformation and extraction, because specimens are not subjected to chemical fixation, dehydration and critical-point drying. Since Echlin et al developed a LTSEM, many techniques and instruments have been reported for observing frozen materials. However, intracellular structures such as mitochondria and endoplasmic reticulum have been unobservable by the method because of the low resolving power and inadequate specimen preparation methods. Recently, we developed a low temperature SEM that attained high resolutions. In this study, we introduce highly magnified images obtained by the newly developed LTSEM, especially intracellular structures which have been rapidly frozen without chemical fixation.[Specimen preparations] Mouse pancreas and brown adipose tissues (BAT) were used as materials. After the tissues were removed and cut into small pieces, the specimen was placed on a cryo-tip and rapidly frozen in liquid propane using a rapid freezing apparatus (Eiko Engineering Co. Ltd., Japan). After the tips were mounted on the specimen stage of a precooled cryo-holder, the surface of the specimen was manually fractured by a razor blade in liquid nitrogen. The cryo-holder was then inserted into the specimen chamber of the SEM (ISI DS-130), and specimens were observed at the accelerating voltages of 5-8 kV. At first the surface was slightly covered with frost, but intracellular structures were gradually revealed as the frost began to sublimate. Gold was then coated on the specimen surface while tilting the holder at 45-90°. The holder was connected to a liquid nitrogen reservoir by means of a copper braid to maintain low temperature.

Criteria for the evaluation of low-temperature Scanning Electron Microscopy

1986 ◽  
Vol 44 ◽  
pp. 902-903
Author(s):  
Alan Beckett
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Low Temperature ◽  
Conformational Changes ◽  
Chemical Vapour ◽  
List Type ◽  
Dimensional Changes ◽  
Critical Point Drying ◽  
Temperature Scanning ◽  
Scanning Electron

Low temperature scanning electron microscopy (LTSEM) has been evaluated with special reference to its application to the study of morphology and development in microorganisms. A number of criteria have been considered and have proved valuable in assessing the standard of results achieved. To further aid our understanding of these results, it has been necessary to compare those obtained by LTSEM with those from more conventional preparatory procedures such as 1) chemical fixation, dehydration and critical point-drying; 2) freeze-drying with or without chemical vapour fixation before hand.The criteria used for assessing LTSEM for the above purposes are as follows: 1)Specimen immobilization and stabilization2)General preservation of external morphology3)General preservation of internal morphology4)Exposure to solvents5)Overall dimensional changes6)Cell surface texture7)Differential conformational changes8)Etching frozen-hydrated material9)Beam damage10)Specimen resolution11)Specimen life

Magnesium Nitrate as Additive for Synthesis of Mg(OH)2 Nanoparticles

2012 ◽  
Vol 198-199 ◽  
pp. 99-102
Author(s):  
Qing Gang Kong ◽  
Hai Yan Qian
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Low Temperature ◽  
Magnesium Nitrate ◽  
Crystal Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Size And Morphology ◽  
Scanning Electron

Magnesium nitrate was used as additive for synthesis of Mg(OH)2 (MH) nanoparticles at low temperature (70°C). Mg(OH)2 nanoparticles have platelet-like structure and approximately 40-60nm in thicknesses. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were applied to characterize the crystal phase. The supersaturation degree of solution effects the size and morphology of MH nanoparticles.

scholarly journals In Situ Laser-Induced Fabrication of a Ruthenium-Based Microelectrode for Non-Enzymatic Dopamine Sensing

Materials ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 5385
Author(s):  
Maxim S. Panov ◽  
Anastasiia E. Grishankina ◽  
Daniil D. Stupin ◽  
Alexey I. Lihachev ◽  
Vladimir N. Mironov ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Electrical Impedance ◽  
High Sensitivity ◽  
Simple Approach ◽  
Electrical Impedance Spectroscopy ◽  
Deposition Technique ◽  
Developed Surface ◽  
Scanning Electron

In this paper, we propose a fast and simple approach for the fabrication of the electrocatalytically active ruthenium-containing microstructures using a laser-induced metal deposition technique. The results of scanning electron microscopy and electrical impedance spectroscopy (EIS) demonstrate that the fabricated ruthenium-based microelectrode had a highly developed surface composed of 10 μm pores and 10 nm zigzag cracks. The fabricated material exhibited excellent electrochemical properties toward non-enzymatic dopamine sensing, including high sensitivity (858.5 and 509.1 μA mM−1 cm−2), a low detection limit (0.13 and 0.15 μM), as well as good selectivity and stability.

Effect of moisturized air on magnetoimpedance response of Fe-based ribbons

2020 ◽  
Vol 34 (24) ◽  
pp. 2050249
Author(s):  
L. Yoosefi ◽  
V. Setoodeh
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Environmental Conditions ◽  
Surface Condition ◽  
High Sensitivity ◽  
Response Ratio ◽  
Sem Images ◽  
Weak Magnetic Fields ◽  
Magnetic Elements ◽  
Scanning Electron

High sensitivity and response ratio of magnetoimpedance (MI) sensors have raised interest for using them in different environments for detection of weak magnetic fields of magnetic elements even though the high dependence of the MI response to the surface condition of the MI sensor has limited its application in some environments. In this study, we investigate the effects originating from the MI measurement in moisturized air. Using scanning electron microscopy (SEM) images, it is observed that the surface of an Fe-based MI sensor has become rough and granular after the presence of moisture on its surface. Results can be useful for developing MI sensors for use in different environmental conditions.

scholarly journals Low-temperature scanning electron microscopy in fungus-nematode interaction

Scanning ◽  
1993 ◽  
Vol 15 (1) ◽  
pp. 37-42 ◽  
Author(s):  
E. Den Belder ◽  
A. Boekestein ◽  
J. W. J. Van Esch ◽  
F. Thiel
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Low Temperature ◽  
Temperature Scanning ◽  
Scanning Electron
Sign in / Sign up

Export Citation Format

Share Document