scholarly journals Interdigitated Electrode Biosensor Based on Plasma-Deposited TiO2 Nanoparticles for Detecting DNA

Biosensors ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 212
Author(s):  
Jhongryul Yoo ◽  
Hongin Jeong ◽  
Seo Kyung Park ◽  
Sungho Park ◽  
Je Seung Lee
Keyword(s):  
Tio2 Nanoparticles ◽  
Structural Properties ◽  
Photoelectron Spectroscopy ◽  
Bacterial Species ◽  
Metal Oxide Nanoparticles ◽  
Electrical Signal ◽  
Dna Biosensor ◽  
Interdigitated Electrode ◽  
X Ray ◽  
Target Dna

Bioelectrodes mediated by metal oxide nanoparticles have facilitated the development of new sensors in medical diagnosis. High-purity TiO2 nanoparticles (NPs) were synthesized through thermal plasma and deposited directly on an interdigitated electrode. The surface of the TiO2-deposited electrode was activated with (3-aminopropyl) triethoxysilane (APTES) followed by fixing the single-stranded probe deoxyribonucleic acid (DNA) to fabricate the DNA biosensor. The structural properties of the deposited TiO2 nanoparticles were analyzed using a transmission electron microscope (TEM), X-ray diffraction (XRD), and a dynamic light scattering (DLS) system. The chemical composition and structural properties of the TiO2 nanoparticle layer and the fixed layer were analyzed by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). E. coli O157:H7, a well-known pernicious pathogenic bacterial species, was detected as a target DNA of the prepared DNA biosensor, and the characteristics of DNA detection were determined by the current change using a picoammeter. The degree of binding between the probe DNA and the target DNA was converted into an electrical signal using the picoammeter method to quantitatively analyze the concentration of the target DNA. With the specificity experiment, it was confirmed that the biosensor was able to discriminate between nucleotides with mismatched, non-complementary, or complementary sequences.

scholarly journals Non-Enzymatic Glucose Biosensor Based on Highly Pure TiO2 Nanoparticles

Biosensors ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 149
Author(s):  
Hongin Jeong ◽  
Jhongryul Yoo ◽  
Seokyung Park ◽  
Jiling Lu ◽  
Sungho Park ◽  
...  
Keyword(s):  
Tio2 Nanoparticles ◽  
Structural Properties ◽  
Polymer Films ◽  
Photoelectron Spectroscopy ◽  
Glucose Sensor ◽  
Conductive Polymer ◽  
Glucose Biosensor ◽  
Pure Tio2 ◽  
Xps Spectra ◽  
X Ray

This study proposes a non-enzymatic glucose sensor fabricated by synthesizing high-purity TiO2 nanoparticles in thermal plasma and depositing it directly on a substrate and then depositing chitosan–polypyrrole (CS-PPy) conductive polymer films by electrochemical method. The structural properties of the deposited TiO2 nanoparticles were analyzed by X-ray diffraction (XRD) and dynamic light scattering (DLS) system. The chemical composition and structural properties of the TiO2 nanoparticle layer and the conductive polymer films were confirmed by X-ray photoelectron spectroscopy (XPS) spectra and scanning electron microscope (SEM). The glucose detection characteristics of the fabricated biosensor were determined by cyclic voltammetry (CV). CS-PPy/TiO2 biosensor showed high sensitivity of 302.0 µA mM−1 cm−2 (R2 = 0.9957) and low detection limit of 6.7 μM. The easily manufactured CS-PPy/TiO2 biosensor showed excellent selectivity and reactivity.

scholarly journals Phytosynthetic Fabrication of Lanthanum Ion-Doped Nickel Oxide Nanoparticles Using Sesbania grandiflora Leaf Extract and Their Anti-Microbial Properties

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 124
Author(s):  
Srihasam Saiganesh ◽  
Thyagarajan Krishnan ◽  
Golla Narasimha ◽  
Hesham S. Almoallim ◽  
Sulaiman Ali Alhari ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Optical Properties ◽  
Rare Earth ◽  
Nickel Oxide ◽  
Photoelectron Spectroscopy ◽  
Metal Oxide Nanoparticles ◽  
Oxide Nanoparticles ◽  
Nio Nanoparticles ◽  
X Ray ◽  
Sesbania Grandiflora

Over the past few years, the photogenic fabrication of metal oxide nanoparticles has attracted considerable attention, owing to the simple, eco-friendly, and non-toxic procedure. Herein, we fabricated NiO nanoparticles and altered their optical properties by doping with a rare earth element (lanthanum) using Sesbania grandiflora broth for antibacterial applications. The doping of lanthanum with NiO was systematically studied. The optical properties of the prepared nanomaterials were investigated through UV-Vis diffuse reflectance spectra (UV-DRS) analysis, and their structures were studied using X-ray diffraction analysis. The morphological features of the prepared nanomaterials were examined by scanning electron microscopy and transmission electron microscopy, their elemental structure was analyzed by energy-dispersive X-ray spectral analysis, and their oxidation states were analyzed by X-ray photoelectron spectroscopy. Furthermore, the antibacterial action of NiO and La-doped NiO nanoparticles was studied by the zone of inhibition method for Gram-negative and Gram-positive bacterial strains such as Escherichia coli and Bacillus sublitis. It was evident from the obtained results that the optimized compound NiOLa-04 performed better than the other prepared compounds. To the best of our knowledge, this is the first report on the phytosynthetic fabrication of rare-earth ion Lanthanum (La3+)-doped Nickel Oxide (NiO) nanoparticles and their anti-microbial studies.

scholarly journals Facile Fabrication of Metal Oxide Based Catalytic Electrodes by AC Plasma Deposition and Electrochemical Detection of Hydrogen Peroxide

Catalysts ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 888 ◽  
Author(s):  
Quang-Tan Bui ◽  
In-Keun Yu ◽  
Anantha Iyengar Gopalan ◽  
Gopalan Saianand ◽  
Woonjung Kim ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Metal Oxide ◽  
Photoelectron Spectroscopy ◽  
Electrode Materials ◽  
Plasma Deposition ◽  
Metal Oxide Nanoparticles ◽  
Modified Electrodes ◽  
Precursor Solution ◽  
X Ray ◽  
Cuo Nps

In this study, the fabrication of a metal oxide nanoparticles (NPs) dispersed catalytic electrode is described based on a new alternating current (AC) plasma deposition approach. The fabrication involves the treatment of AC plasma on a precursor solution comprised of metal salts such as CuCl2, FeCl2, and ZnCl2, and a monomer (acrylic acid) in the presence/absence of a cross-linker. Furthermore, the utility of such developed electrodes has been demonstrated for the electrochemical determination of hydrogen peroxide (H2O2). The electrode materials obtained through plasma treatment was characterized by Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscope (SEM), contact angle measurements, energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry. Among the metal oxide modified electrodes prepared by the AC plasma deposition method, the copper oxide (CuO) NPs catalytic electrode exhibited significant oxidation and reduction peaks for H2O2 in phosphate-buffered saline solution. The catalytic electrode with CuO NPs exhibited a combination of good H2O2 sensing characteristics such as good sensitivity (63.52 mA M−1 cm−2), good selectivity, low detection limits (0.6 µM), fast sensing response (5 s), a wide linear range (0.5–8.5 mM), and good stability over 120 cycles. Based on our results, it is well demonstrated that plasma deposition could be effectively utilized for the fabrication of the catalytic electrode for detection of H2O2 concentrations. Further, the strategy of using AC plasma for fabrication of metal oxide-based modified electrodes could also be extended for the fabrication of other kinds of nanomaterials-based sensors.

scholarly journals Grafting Hyperbranched Polymers onto TiO2 Nanoparticles via Thiol-yne Click Chemistry and Its Effect on the Mechanical, Thermal and Surface Properties of Polyurethane Coating

Materials ◽  
2019 ◽  
Vol 12 (17) ◽  
pp. 2817 ◽  
Author(s):  
Feng Zhan ◽  
Lei Xiong ◽  
Fang Liu ◽  
Chenying Li
Keyword(s):  
Click Chemistry ◽  
Tio2 Nanoparticles ◽  
Photoelectron Spectroscopy ◽  
Hyperbranched Polymers ◽  
Nanocomposite Coatings ◽  
Mechanical And Thermal Properties ◽  
Nanoparticle Dispersion ◽  
X Ray Diffraction ◽  
X Ray ◽  
Surface Modified

In this study, we proposed a novel and facile method to modify the surface of TiO2 nanoparticles and investigated the influence of the surface-modified TiO2 nanoparticles as an additive in a polyurethane (PU) coating. The hyperbranched polymers (HBP) were grafted on the surface of TiO2 nanoparticles via the thiol-yne click chemistry to reduce the aggregation of nanoparticles and increase the interaction between TiO2 and polymer matrices. The grafting of HBP on the TiO2 nanoparticles surface was investigated by means of X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Fourier transform infrared (FT-IR), nuclear magnetic resonance (NMR) and thermogravimetry analysis (TGA). The thermal and mechanical properties of nanocomposite coatings containing various amounts of TiO2 nanoparticles were measured by dynamic mechanical thermal (DMTA) and tensile strength measurement. Moreover, the surface structure and properties of the newly prepared nanocomposite coatings were examined. The experimental results demonstrate that the incorporation of the surface-modified TiO2 nanoparticles can improve the mechanical and thermal properties of nanocomposite coatings. The results also reveal that the surface modification of TiO2 with the HBP chains improves the nanoparticle dispersion, and the coating surface shows a lotus leaf-like microstructure. Thus, the functional nanocomposite coatings exhibit superhydrophobic properties, good photocatalytic depollution performance, and high stripping resistance.

scholarly journals Application of Reverse Micelle Sol–Gel Synthesis for Bulk Doping and Heteroatoms Surface Enrichment in Mo-Doped TiO2 Nanoparticles

Materials ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 937 ◽  
Author(s):  
Roberto Nasi ◽  
Serena Esposito ◽  
Francesca Freyria ◽  
Marco Armandi ◽  
Tanveer Gadhi ◽  
...  
Keyword(s):  
Tio2 Nanoparticles ◽  
Reverse Micelle ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Actual State ◽  
Test Reaction ◽  
Potential Measurement ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Mo Content

TiO2 nanoparticles containing 0.0, 1.0, 5.0, and 10.0 wt.% Mo were prepared by a reverse micelle template assisted sol–gel method allowing the dispersion of Mo atoms in the TiO2 matrix. Their textural and surface properties were characterized by means of X-ray powder diffraction, micro-Raman spectroscopy, N2 adsorption/desorption isotherms at −196 °C, energy dispersive X-ray analysis coupled to field emission scanning electron microscopy, X-ray photoelectron spectroscopy, diffuse reflectance UV–Vis spectroscopy, and ζ-potential measurement. The photocatalytic degradation of Rhodamine B (under visible light and low irradiance) in water was used as a test reaction as well. The ensemble of the obtained experimental results was analyzed in order to discover the actual state of Mo in the final materials, showing the occurrence of both bulk doping and Mo surface species, with progressive segregation of MoOx species occurring only at a higher Mo content.

scholarly journals The Effects of Annealing Temperature on the Structural Properties of ZrB2 Films Deposited via Pulsed DC Magnetron Sputtering

Coatings ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 253 ◽  
Author(s):  
Wei-Chun Chen ◽  
Chao-Te Lee ◽  
James Su ◽  
Hung-Pin Chen
Keyword(s):  
Electron Microscopy ◽  
Magnetron Sputtering ◽  
Structural Properties ◽  
Photoelectron Spectroscopy ◽  
Annealing Temperature ◽  
High Vacuum ◽  
Film Structure ◽  
Dc Magnetron Sputtering ◽  
Cross Sectional ◽  
X Ray

Zirconium diboride (ZrB2) thin films were deposited on a Si(100) substrate using pulsed direct current (dc) magnetron sputtering and then annealed in high vacuum. In addition, we discussed the effects of the vacuum annealing temperature in the range of 750 to 870 °C with flowing N2 on the physical properties of ZrB2 films. The structural properties of ZrB2 films were investigated with X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS). The XRD patterns indicated that the ZrB2 films annealed at various temperatures exhibited a highly preferred orientation along the [0001] direction and that the residual stress could be relaxed by increasing the annealing temperature at 870 °C in a vacuum. The surface morphology was smooth, and the surface roughness slightly decreased with increasing annealing temperature. Cross-sectional TEM images of the ZrB2/Si(100) film annealed at 870 °C reveals the films were highly oriented in the direction of the c-axis of the Si substrate and the film structure was nearly stoichiometric in composition. The XPS results show the film surfaces slightly contain oxygen, which corresponds to the binding energy of Zr–O. Therefore, the obtained ZrB2 film seems to be quite suitable as a buffer layer for III-nitride growth.

Study of the structural properties of ZnO thin films by x-ray photoelectron spectroscopy

1994 ◽  
Vol 78 (1) ◽  
pp. 57-61 ◽  
Author(s):  
Li-Jian Meng ◽  
Carlos P. Moreira de Sá ◽  
M.P. dos Santos
Keyword(s):  
Thin Films ◽  
Structural Properties ◽  
Photoelectron Spectroscopy ◽  
Zno Thin Films ◽  
X Ray

scholarly journals Band Gap Implications on Nano-TiO2 Surface Modification with Ascorbic Acid for Visible Light-Active Polypropylene Coated Photocatalyst

Nanomaterials ◽  
2018 ◽  
Vol 8 (8) ◽  
pp. 599 ◽  
Author(s):  
Chiara D’Amato ◽  
Rita Giovannetti ◽  
Marco Zannotti ◽  
Elena Rommozzi ◽  
Marco Minicucci ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Surface Modification ◽  
Visible Light ◽  
Band Gap ◽  
Tio2 Nanoparticles ◽  
Photoelectron Spectroscopy ◽  
Nano Tio2 ◽  
Alizarin Red ◽  
X Ray ◽  
Visible Light Active

The effect of surface modification using ascorbic acid as a surface modifier of nano-TiO2 heterogeneous photocatalyst was studied. The preparation of supported photocatalyst was made by a specific paste containing ascorbic acid modified TiO2 nanoparticles used to cover Polypropylene as a support material. The obtained heterogeneous photocatalyst was thoroughly characterized (scanning electron microscope (SEM), RAMAN, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), photoluminescence (PL), and Diffuse Reflectance Spectra (DRS) and successfully applied in the visible light photodegradation of Alizarin Red S in water solutions. In particular, this new supported TiO2 photocatalyst showed a change in the adsorption mechanism of dye with respect to that of only TiO2 due to the surface properties. In addition, an improvement of photocatalytic performances in the visible light photodegration was obtained, showing a strict correlation between efficiency and energy band gap values, evidencing the favorable surface modification of TiO2 nanoparticles.

scholarly journals Two-Step Exfoliation of WS2 for NO2, H2 and Humidity Sensing Applications

Nanomaterials ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 1363 ◽  
Author(s):  
Valentina Paolucci ◽  
Seyed Mahmoud Emamjomeh ◽  
Michele Nardone ◽  
Luca Ottaviano ◽  
Carlo Cantalini
Keyword(s):  
Photoelectron Spectroscopy ◽  
Gas Sensing ◽  
Electrical Response ◽  
Microstructural Analysis ◽  
Surface Oxidation ◽  
Electrical Signal ◽  
X Ray ◽  
Sensing Applications ◽  
One Year

WS2 exfoliated by a combined ball milling and sonication technique to produce few-layer WS2 is characterized and assembled as chemo-resistive NO2, H2 and humidity sensors. Microstructural analyses reveal flakes with average dimensions of 110 nm, “aspect ratio” of lateral dimension to the thickness of 27. Due to spontaneous oxidation of exfoliated WS2 to amorphous WO3, films have been pre-annealed at 180 °C to stabilize WO3 content at ≈58%, as determined by X-ray Photoelectron Spectroscopy (XPS), Raman and grazing incidence X-ray Diffraction (XRD) techniques. Microstructural analysis repeated after one-year conditioning highlighted that amorphous WO3 concentration is stable, attesting the validity of the pre-annealing procedure. WS2 films were NO2, H2 and humidity tested at 150 °C operating Temperature (OT), exhibiting experimental detection limits of 200 ppb and 5 ppm to NO2 and H2 in dry air, respectively. Long-term stability of the electrical response recorded over one year of sustained conditions at 150 °C OT and different gases demonstrated good reproducibility of the electrical signal. The role played by WO3 and WS2 upon gas response has been addressed and a likely reaction gas-mechanism presented. Controlling the microstructure and surface oxidation of exfoliated Transition Metal Dichalcogenides (TMDs) represents a stepping-stone to assess the reproducibility and long-term response of TMDs monolayers in gas sensing applications.

Sign in / Sign up

Export Citation Format

Share Document