scholarly journals Printed Electrochemical Biosensors: Opportunities and Metrological Challenges

Biosensors ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 166
Author(s):  
Emilio Sardini ◽  
Mauro Serpelloni ◽  
Sarah Tonello
Keyword(s):  
Limit Of Detection ◽  
Point Of Care ◽  
Low Cost ◽  
Basic Research ◽  
Critical Discussion ◽  
Detection Sensitivity ◽  
Live Cells ◽  
Electrochemical Biosensors ◽  
Non Invasive ◽  
Home Based

Printed electrochemical biosensors have recently gained increasing relevance in fields ranging from basic research to home-based point-of-care. Thus, they represent a unique opportunity to enable low-cost, fast, non-invasive and/or continuous monitoring of cells and biomolecules, exploiting their electrical properties. Printing technologies represent powerful tools to combine simpler and more customizable fabrication of biosensors with high resolution, miniaturization and integration with more complex microfluidic and electronics systems. The metrological aspects of those biosensors, such as sensitivity, repeatability and stability, represent very challenging aspects that are required for the assessment of the sensor itself. This review provides an overview of the opportunities of printed electrochemical biosensors in terms of transducing principles, metrological characteristics and the enlargement of the application field. A critical discussion on metrological challenges is then provided, deepening our understanding of the most promising trends in order to overcome them: printed nanostructures to improve the limit of detection, sensitivity and repeatability; printing strategies to improve organic biosensor integration in biological environments; emerging printing methods for non-conventional substrates; microfluidic dispensing to improve repeatability. Finally, an up-to-date analysis of the most recent examples of printed electrochemical biosensors for the main classes of target analytes (live cells, nucleic acids, proteins, metabolites and electrolytes) is reported.

scholarly journals Rapid Mass Spectrometric Diagnosis of Bladder Cancer via Urine Carbonyl Metabolic Fingerprints

2021 ◽  
Author(s):  
Zongxiu Nie ◽  
Yuze Li ◽  
Lixia Jiang ◽  
Zhenpeng Wang ◽  
Xiaohua Cao ◽  
...  
Keyword(s):  
Bladder Cancer ◽  
Point Of Care ◽  
Low Cost ◽  
Mass Spectrometric ◽  
Detection Sensitivity ◽  
Ionization Mass ◽  
Non Invasive ◽  
Diagnosis Method ◽  
Rapid Mass ◽  
Potential Biomarkers

Abstract The diagnosis of bladder cancer (BC) is currently based on cystoscopy, which is invasive and expensive. Here, we described a non-invasive, low-cost BC diagnosis method based on a desorption, separation, and ionization mass spectrometry platform (DSI-MS) that adopts N, N- Dimethylethylenediamine (DMED) as a differential labeling reagent. The DSI-MS platform avoids the interferences from intra- and/or inter-samples, while the DMED increases detection sensitivity and distinguishes carboxyl, aldehyde, and ketone groups from untreated samples. Carbonyl metabolic fingerprints of urine from 28 BC patients and 38 controls were portrayed and significant differences of some potential biomarkers were observed. The mechanisms of the changes have been discussed. Logistic regression (LR) was applied to discriminate BC from controls and an accuracy of 87% was achieved. We believe this patient-friendly method provides a hopeful approach for BC rapid point-of-care diagnostic.

scholarly journals Accelerated electron transfer in nanostructured electrodes improves the sensitivity of electrochemical biosensors

2021 ◽  
Author(s):  
Kaiyu Fu ◽  
Ji-Won Seo ◽  
Vladimir Kesler ◽  
Nicolo Maganzini ◽  
Brandon D. Wilson ◽  
...  
Keyword(s):  
Electron Transfer ◽  
Limit Of Detection ◽  
Low Cost ◽  
Fold Increase ◽  
Underlying Mechanism ◽  
Detection Sensitivity ◽  
Molecular Diagnostic ◽  
Electrochemical Biosensors ◽  
Electron Transfer Mechanism ◽  
Nanostructured Electrodes

Electrochemical biosensors hold the exciting potential to integrate molecular detection with signal processing and wireless communication in a miniaturized, low-cost system. However, as electrochemical biosensors are miniaturized to the micron scale, their detection sensitivity degrades precipitously, thereby greatly reducing their utility in the context of molecular diagnostic applications. Studies have reported that nanostructured electrodes can greatly improve electrochemical biosensor sensitivity, but the underlying mechanism remains poorly understood, thus making it difficult to fully exploit this phenomenon to improve biosensor performance. In this work, we propose and experimentally validate a novel mechanism in which electron transfer is physically accelerated within nanostructured electrodes due to reduced charge screening, resulting in enhanced sensitivity. We show that this mechanism can be exploited to achieve up to 24-fold increase in signal and nearly four-fold lower limit-of-detection relative conventional planar electrodes. This accelerated electron transfer mechanism should prove broadly applicable for improving the performance of electrochemical biosensors.

Ferromagnetic Resonance Biosensor for Homogeneous and Volumetric Detection of DNA

2017 ◽  
Author(s):  
Bo Tian ◽  
Peter Svedlindh ◽  
Mattias Strömberg ◽  
Erik Wetterskog
Keyword(s):  
Magnetic Nanoparticles ◽  
Ferromagnetic Resonance ◽  
Limit Of Detection ◽  
Point Of Care ◽  
Rolling Circle Amplification ◽  
Resonance Field ◽  
Isothermal Amplification ◽  
Detection Sensitivity ◽  
Serum Samples ◽  
Rolling Circle

In this work, we demonstrate for the first time, a ferromagnetic resonance (FMR) based homogeneous and volumetric biosensor for magnetic label detection. Two different isothermal amplification methods, <i>i.e.</i>, rolling circle amplification (RCA) and loop-mediated isothermal amplification (LAMP) are adopted and combined with a standard electron paramagnetic resonance (EPR) spectrometer for FMR biosensing. For RCA-based FMR biosensor, binding of RCA products of a synthetic Vibrio cholerae target DNA sequence gives rise to the formation of aggregates of magnetic nanoparticles. Immobilization of nanoparticles within the aggregates leads to a decrease of the net anisotropy of the system and a concomitant increase of the resonance field. A limit of detection of 1 pM is obtained with an average coefficient of variation of 0.16%, which is superior to the performance of other reported RCA-based magnetic biosensors. For LAMP-based sensing, a synthetic Zika virus target oligonucleotide is amplified and detected in 20% serum samples. Immobilization of magnetic nanoparticles is induced by their co-precipitation with Mg<sub>2</sub>P<sub>2</sub>O<sub>7</sub> (a by-product of LAMP) and provides a detection sensitivity of 100 aM. The fast measurement, high sensitivity and miniaturization potential of the proposed FMR biosensing technology makes it a promising candidate for designing future point-of-care devices.<br>

scholarly journals Rapid and Sensitive Detection of miRNA Based on AC Electrokinetic Capacitive Sensing for Point-of-Care Applications

Sensors ◽  
2021 ◽  
Vol 21 (12) ◽  
pp. 3985
Author(s):  
Nan Wan ◽  
Yu Jiang ◽  
Jiamei Huang ◽  
Rania Oueslati ◽  
Shigetoshi Eda ◽  
...  
Keyword(s):  
Limit Of Detection ◽  
Point Of Care ◽  
Low Cost ◽  
Clinical Diagnostics ◽  
Detection Methods ◽  
Capacitive Sensing ◽  
Application Potential ◽  
Mirna Detection ◽  
Mirna 25 ◽  
Low Sensitivity

A sensitive and efficient method for microRNAs (miRNAs) detection is strongly desired by clinicians and, in recent years, the search for such a method has drawn much attention. There has been significant interest in using miRNA as biomarkers for multiple diseases and conditions in clinical diagnostics. Presently, most miRNA detection methods suffer from drawbacks, e.g., low sensitivity, long assay time, expensive equipment, trained personnel, or unsuitability for point-of-care. New methodologies are needed to overcome these limitations to allow rapid, sensitive, low-cost, easy-to-use, and portable methods for miRNA detection at the point of care. In this work, to overcome these shortcomings, we integrated capacitive sensing and alternating current electrokinetic effects to detect specific miRNA-16b molecules, as a model, with the limit of detection reaching 1.0 femto molar (fM) levels. The specificity of the sensor was verified by testing miRNA-25, which has the same length as miRNA-16b. The sensor we developed demonstrated significant improvements in sensitivity, response time and cost over other miRNA detection methods, and has application potential at point-of-care.

scholarly journals Demonstration of a Label-Free and Low-Cost Optical Cavity-Based Biosensor Using Streptavidin and C-Reactive Protein

Biosensors ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 4
Author(s):  
Donggee Rho ◽  
Seunghyun Kim
Keyword(s):  
Limit Of Detection ◽  
Point Of Care ◽  
Low Cost ◽  
Optical Cavity ◽  
Sample Volume ◽  
Small Sample ◽  
Label Free ◽  
C Reactive Protein ◽  
Reactive Protein ◽  
Cavity Structure

An optical cavity-based biosensor (OCB) has been developed for point-of-care (POC) applications. This label-free biosensor employs low-cost components and simple fabrication processes to lower the overall cost while achieving high sensitivity using a differential detection method. To experimentally demonstrate its limit of detection (LOD), we conducted biosensing experiments with streptavidin and C-reactive protein (CRP). The optical cavity structure was optimized further for better sensitivity and easier fluid control. We utilized the polymer swelling property to fine-tune the optical cavity width, which significantly improved the success rate to produce measurable samples. Four different concentrations of streptavidin were tested in triplicate, and the LOD of the OCB was determined to be 1.35 nM. The OCB also successfully detected three different concentrations of human CRP using biotinylated CRP antibody. The LOD for CRP detection was 377 pM. All measurements were done using a small sample volume of 15 µL within 30 min. By reducing the sensing area, improving the functionalization and passivation processes, and increasing the sample volume, the LOD of the OCB are estimated to be reduced further to the femto-molar range. Overall, the demonstrated capability of the OCB in the present work shows great potential to be used as a promising POC biosensor.

scholarly journals 2D Materials in Development of Electrochemical Point-of-Care Cancer Screening Devices

Micromachines ◽  
2019 ◽  
Vol 10 (10) ◽  
pp. 662 ◽  
Author(s):  
Mohsen Mohammadniaei ◽  
Huynh Vu Nguyen ◽  
My Van Tieu ◽  
Min-Ho Lee
Keyword(s):  
Cancer Screening ◽  
2D Materials ◽  
Point Of Care ◽  
Low Cost ◽  
Clinical Analysis ◽  
Cancer Diagnostics ◽  
Electrochemical Sensing ◽  
Screening Tools ◽  
Electrochemical Biosensors ◽  
2D Material

Effective cancer treatment requires early detection and monitoring the development progress in a simple and affordable manner. Point-of care (POC) screening can provide a portable and inexpensive tool for the end-users to conveniently operate test and screen their health conditions without the necessity of special skills. Electrochemical methods hold great potential for clinical analysis of variety of chemicals and substances as well as cancer biomarkers due to their low cost, high sensitivity, multiplex detection ability, and miniaturization aptitude. Advances in two-dimensional (2D) material-based electrochemical biosensors/sensors are accelerating the performance of conventional devices toward more practical approaches. Here, recent trends in the development of 2D material-based electrochemical biosensors/sensors, as the next generation of POC cancer screening tools, are summarized. Three cancer biomarker categories, including proteins, nucleic acids, and some small molecules, will be considered. Various 2D materials will be introduced and their biomedical applications and electrochemical properties will be given. The role of 2D materials in improving the performance of electrochemical sensing mechanisms as well as the pros and cons of current sensors as the prospective devices for POC screening will be emphasized. Finally, the future scopes of implementing 2D materials in electrochemical POC cancer diagnostics for the clinical translation will be discussed.

scholarly journals Whole Blood Immunoassay Based on Centrifugal Bead Sedimentation

2011 ◽  
Vol 57 (5) ◽  
pp. 753-761 ◽  
Author(s):  
Ulrich Y Schaff ◽  
Greg J Sommer
Keyword(s):  
Whole Blood ◽  
Single Channel ◽  
Limit Of Detection ◽  
Point Of Care ◽  
Low Cost ◽  
Microfluidic System ◽  
Blood Samples ◽  
Reactive Protein ◽  
Immunoassay Technique ◽  
Microfluidic Immunoassay

BACKGROUND Centrifugal “lab on a disk” microfluidics is a promising avenue for developing portable, low-cost, automated immunoassays. However, the necessity of incorporating multiple wash steps results in complicated designs that increase the time and sample/reagent volumes needed to run assays and raises the probability of errors. We present proof of principle for a disk-based microfluidic immunoassay technique that processes blood samples without conventional wash steps. METHODS Microfluidic disks were fabricated from layers of patterned, double-sided tape and polymer sheets. Sample was mixed on-disk with assay capture beads and labeling antibodies. Following incubation, the assay beads were physically separated from the blood cells, plasma, and unbound label by centrifugation through a density medium. A signal-laden pellet formed at the periphery of the disk was analyzed to quantify concentration of the target analyte. RESULTS To demonstrate this technique, the inflammation biomarkers C-reactive protein and interleukin-6 were measured from spiked mouse plasma and human whole blood samples. On-disk processing (mixing, labeling, and separation) facilitated direct assays on 1-μL samples with a 15-min sample-to-answer time, &lt;100 pmol/L limit of detection, and 10% CV. We also used a unique single-channel multiplexing technique based on the sedimentation rate of different size or density bead populations. CONCLUSIONS This portable microfluidic system is a promising method for rapid, inexpensive, and automated detection of multiple analytes directly from a drop of blood in a point-of-care setting.

scholarly journals Application of Flexible Display Technology to Low Cost Multiplexed Point-of-Care Medical Diagnostic Testing

2016 ◽  
Vol 2 (3_suppl) ◽  
pp. 14s-14s
Author(s):  
Benjamin A. Katchman ◽  
Joseph T. Smith ◽  
Jennifer Blain Christen ◽  
Karen S. Anderson
Keyword(s):  
Intellectual Property ◽  
Limit Of Detection ◽  
Point Of Care ◽  
Low Cost ◽  
Manufacturing Technology ◽  
Analytical Sensitivity ◽  
State University ◽  
Arizona State University ◽  
New Approach ◽  
Display Technology

Abstract 62 One of the key roadblocks limiting the transition of high-sensitivity and high-specificity point-of-care technologies from the research laboratory to wide spread use is the availability of a low-cost-high-volume manufacturing technology. This work presents a new interdisciplinary approach combining low cost commercial display manufacturing technology with programmable high density protein microarray printing technology to fabricate disposable point-of-care immunosensors with clinical level sensitivity. Our approach is designed to leverage advances in commercial display technology to reduce pre-functionalized biosensor substrate costs to pennies per cm2, as well as to leverage the display industry’s ability to manufacture an immense number of low cost consumer electronic products annually. For this work, we demonstrate that our new approach can offer diagnostic sensitivity at or below 10 pg/mL, which approaches the lower limit of detection of typical clinical laboratory instrumentation. Our new approach is also designed to overcome the limited analytical sensitivity of existing POC devices (>100x improved sensitivity). It also contains new capability for multiplexed biomarker detection (>10 antigens) in a single low cost POC device through an innovative disposable and scalable architecture, based on flat panel display technology. Here, we demonstrate multiplexed detection of antibodies to the HPV16 proteins E2, E6, and E7, which are circulating biomarkers for cervical as well as head and neck cancers. This detection technology has 100 percent correlation to our current laboratory-based measurement instrumentation. AUTHORS' DISCLOSURES OF POTENTIAL CONFLICTS OF INTEREST: Benjamin A. Katchman Patents, Royalties, Other Intellectual Property: Arizona State University Joseph T. Smith Patents, Royalties, Other Intellectual Property: Arizona State University Jennifer Blain Christen Patents, Royalties, Other Intellectual Property: Arizona State University Karen S. Anderson Stock or Other Ownership: Provista Diagnostics Consulting or Advisory Role: Provista Diagnostics Patents, Royalties, Other Intellectual Property: Arizona State University

scholarly journals Super-Nernstian ion sensitive field-effect transistor exploiting charge screening in WSe2/MoS2 heterostructure

2021 ◽  
Vol 5 (1) ◽  
Author(s):  
Sooraj Sanjay ◽  
Mainul Hossain ◽  
Ankit Rao ◽  
Navakanta Bhat
Keyword(s):  
Field Effect ◽  
Field Effect Transistors ◽  
Point Of Care ◽  
Low Cost ◽  
Ph Sensor ◽  
Detection Sensitivity ◽  
Label Free ◽  
Back Gate ◽  
Dielectric Thickness ◽  
Label Free Detection

AbstractIon-sensitive field-effect transistors (ISFETs) have gained a lot of attention in recent times as compact, low-cost biosensors with fast response time and label-free detection. Dual gate ISFETs have been shown to enhance detection sensitivity beyond the Nernst limit of 59 mV pH−1 when the back gate dielectric is much thicker than the top dielectric. However, the thicker back-dielectric limits its application for ultrascaled point-of-care devices. In this work, we introduce and demonstrate a pH sensor, with WSe2(top)/MoS2(bottom) heterostructure based double gated ISFET. The proposed device is capable of surpassing the Nernst detection limit and uses thin high-k hafnium oxide as the gate oxide. The 2D atomic layered structure, combined with nanometer-thick top and bottom oxides, offers excellent scalability and linear response with a maximum sensitivity of 362 mV pH−1. We have also used technology computer-aided (TCAD) simulations to elucidate the underlying physics, namely back gate electric field screening through channel and interface charges due to the heterointerface. The proposed mechanism is independent of the dielectric thickness that makes miniaturization of these devices easier. We also demonstrate super-Nernstian behavior with the flipped MoS2(top)/WSe2(bottom) heterostructure ISFET. The results open up a new pathway of 2D heterostructure engineering as an excellent option for enhancing ISFET sensitivity beyond the Nernst limit, for the next-generation of label-free biosensors for single-molecular detection and point-of-care diagnostics.

Sign in / Sign up

Export Citation Format

Share Document