scholarly journals Partial Surface Modification of Low Generation Polyamidoamine Dendrimers: Gaining Insight into their Potential for Improved Carboplatin Delivery

Biomolecules ◽  
2019 ◽  
Vol 9 (6) ◽  
pp. 214 ◽  
Author(s):  
Nguyen ◽  
Bach ◽  
Nguyen Tran ◽  
Cao ◽  
Nguyen ◽  
...  
Keyword(s):  
Renal Clearance ◽  
Size Range ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Efficient Delivery ◽  
Methoxypolyethylene Glycol ◽  
Potential Applications ◽  
High Entrapment Efficiency ◽  
Surface Modified

Carboplatin (CAR) is a second generation platinum-based compound emerging as one of the most widely used anticancer drugs to treat a variety of tumors. In an attempt to address its dose-limiting toxicity and fast renal clearance, several delivery systems (DDSs) have been developed for CAR. However, unsuitable size range and low loading capacity may limit their potential applications. In this study, PAMAM G3.0 dendrimer was prepared and partially surface modified with methoxypolyethylene glycol (mPEG) for the delivery of CAR. The CAR/PAMAM G3.0@mPEG was successfully obtained with a desirable size range and high entrapment efficiency, improving the limitations of previous CAR-loaded DDSs. Cytocompatibility of PAMAM G3.0@mPEG was also examined, indicating that the system could be safely used. Notably, an in vitro release test and cell viability assays against HeLa, A549, and MCF7 cell lines indicated that CAR/PAMAM G3.0@mPEG could provide a sustained release of CAR while fully retaining its bioactivity to suppress the proliferation of cancer cells. These obtained results provide insights into the potential of PAMAM G3.0@mPEG dendrimer as an efficient delivery system for the delivery of a drug that has strong side effects and fast renal clearance like CAR, which could be a promising approach for cancer treatment.

scholarly journals Clarithromycin-Loaded Poly (Lactic-co-glycolic Acid) (PLGA) Nanoparticles for Oral Administration: Effect of Polymer Molecular Weight and Surface Modification with Chitosan on Formulation, Nanoparticle Characterization and Antibacterial Effects

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1632 ◽  
Author(s):  
A. Alper Öztürk ◽  
Evrim Yenilmez ◽  
Mustafa Güçlü Özarda
Keyword(s):  
Oral Delivery ◽  
Glycolic Acid ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Plga Nanoparticles ◽  
Test Method ◽  
Molecular Weights ◽  
Antibiotic Group ◽  
Surface Modified

Clarithromycin (CLR) is a member of the macrolide antibiotic group. CLR has low systemic oral bioavailability and is a drug of class II of the Biopharmaceutical Classification System. In many studies, using nanoparticles (NPs) as a drug delivery system has been shown to increase the effectiveness and bioavailability of active drug substances. This study describes the development and evaluation of poly (lactic-co-glycolic acid) (PLGA) NPs and chitosan (CS)-coated PLGA NPs for oral delivery of CLR. NPs were obtained by nanoprecipitation technique and characterized in detail, and the effect of three molecular weights (Mw1: 7.000–17.000, Mw2: 38.000–54.000, Mw3: 50.000–190.000) of PLGA and CS coating on particle size (PS), zeta potential (ZP), entrapment efficiency (EE%), and release properties etc. were elucidated. Gastrointestinal stability and cryoprotectant effect tests were performed on the NPs. The PS of the prepared NPs were in the range of 178 to 578 nm and they were affected by the Mw and CS coating. In surface-modified formulations with CS, the ZP of the NPs increased significantly to positive values. EE% varied from 62% to 85%, depending upon the Mw and CS coating. In vitro release studies of CLR-loaded NPs showed an extended release up to 144 h. Peppas–Sahlin and Weibull kinetic model was found to fit best for CLR release from NPs. By the broth microdilution test method, the antibacterial activity of the formulations was determined on Staphylococcus aureus (ATCC 25923), Listeria monocytogenes (ATCC 1911), and Klebsiella pneumoniae (ATCC 700603). The structures of the formulations were clarified by thermal (DSC), FT-IR, and 1H-NMR analysis. The results showed that PS, ZP, EE%, and dissolution rates of NPs were directly related to the Mw of PLGA and CS coating.

scholarly journals FABRICATION, CHARACTERIZATION, AND IN VITRO EVALUATION OF PEGYLATED GLYCERIDE LABRASOL® NANOSTRUCTURED LIPID CARRIER COMPOSITES OF METHOTREXATE: THE PATHWAY TO EFFECTIVE CANCER THERAPY

2019 ◽  
pp. 229-237 ◽  
Author(s):  
RADHARANI PANDA ◽  
KETOUSETUO KUOTSU
Keyword(s):  
Sustained Release ◽  
Drug Loading ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Nanostructured Lipid Carrier ◽  
Transmission Electron Microscopy Analysis ◽  
Transmission Electron ◽  
Electron Microscopy Analysis ◽  
High Entrapment Efficiency

Objective: The objective of the current study is to optimize and evaluate the potential of polyethylene glycolylated (PEG) glyceride Labrasol® nanostructured lipid carrier (NLC) composites of methotrexate (MTX) to achieve enhanced sustained release delivery in cancer treatment. Materials and Methods: MTX-NLC was successfully prepared by hot melt emulsification and probe sonication method for spatial and controlled release of this therapeutic agent. Results: The solubility screening of MTX and lipids resulted in the selection of Monostearin as solid lipid, PEGylated glyceride Labrasol® and olive oil as liquid lipids for the formulation of MTX-loaded NLC composites. Particle size, zeta potential, and polydispersity index of both the composites were confirmed using dynamic light scattering, whereby Labrasol® MTX-NLC showed high entrapment efficiency and drug loading. A spherical particle shape with smooth surface of all the composites was confirmed from the scanning electron microscope and transmission electron microscopy analysis. Labrasol® MTX-NLC showed remarkably increased cytotoxic response, augmented cellular uptake, and low half maximal inhibitory concentration value in MCF-7 cells. In vitro release study confirmed that encapsulation of MTX in PEGylated glyceride Labrasol® MTX-NLC resulted in enhanced sustained release of MTX for a period of 48 h. Conclusion: The present study establishes that PEGylated glyceride Labrasol® MTX-NLC can be considered as a promising anticancer delivery system, thereby improving antitumor efficacy of the drug.

scholarly journals Development and in vitro evaluation of Letrozole loaded biodegradable nanoparticles for breast cancer therapy

2009 ◽  
Vol 45 (3) ◽  
pp. 585-591 ◽  
Author(s):  
Sanjoy Kumar Dey ◽  
Bivash Mandal ◽  
Manas Bhowmik ◽  
Lakshmi Kanta Ghosh
Keyword(s):  
Breast Cancer ◽  
Particle Size ◽  
Cancer Therapy ◽  
Methylene Chloride ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Breast Cancer Therapy ◽  
Mean Size ◽  
High Entrapment Efficiency

The objectives of our study were to prepare and evaluate a biodegradable nanoparticulate system of Letrozole (LTZ) intended for breast cancer therapy. LTZ loaded poly(lactide-co-glycolide) nanoparticles (LTZ-PLGA-NPs) were prepared by emulsion-solvent evaporation method using methylene chloride and polyvinyl alcohol. Percentage of drug (with respect to polymer) was selected as formulation variable. LTZ-PLGA-NPs were characterized by particle size, zeta potential, infrared spectra, drug entrapment efficiency and in vitro release. Sonication was done with an ultrasound pulse sonicator at 70 W, 30 kHz for 90 sec to produce stable NPs of mean size range from 64 nm to 255 nm with high entrapment efficiency (68% to 82%). Percentage of drug significantly influenced particle size, entrapment efficiency and release (p <0.05). The system sustained release of LTZ significantly and further investigation could exhibit its potential usefulness in breast cancer therapy.

Nifedipine-Loaded Polymeric Nanocapsules: Validation of a Stability-Indicating HPLC Method to Evaluate the Drug Entrapment Efficiency and In Vitro Release Profiles

2013 ◽  
Vol 96 (2) ◽  
pp. 276-281 ◽  
Author(s):  
Andréa Granada ◽  
Monika Piazzon Tagliari ◽  
Valdir Soldi ◽  
Marcos Antônio Segatto Silva ◽  
Betina Ghiel Zanetti-Ramos ◽  
...  
Keyword(s):  
Drug Release ◽  
Zeta Potential ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Hplc Method ◽  
Stability Indicating ◽  
Polymeric Nanocapsules ◽  
Drug Entrapment Efficiency ◽  
High Entrapment Efficiency

Abstract A simple stability-indicating analytical method was developed and validated to quantify nifedipine in polymeric nanocapsule suspensions; an in vitro drug release study was then carried out. The analysis was performed using an RP C18 column, UV-Vis detection at 262 nm, and methanol–water (70 + 30, v/v) mobile phase at a flow rate of 1.2 mL/min. The method was validated in terms of specificity, linearity and range, LOQ, accuracy, precision, and robustness. The results obtained were within the acceptable ranges. The nanocapsules, made of poly(ε-caprolactone), were prepared by the solvent displacement technique and showed high entrapment efficiency. The entrapment efficiency was 97.6 and 98.2% for the nifedipine-loaded polymeric nanocapsules prepared from polyvinyl alcohol (PVA) and Pluronic F68 (PF68), respectively. The particle size and zeta potential of nanocapsules were found to be influenced by the nature of the stabilizer used. The mean diameter and zeta potential for nanocapsules with PVA and PF68 were 290.9 and 179.9 nm, and –17.7 mV and –32.7 mV, respectively. The two formulations prepared showed a drug release of up to 70% over 4 days. This behavior indicates the viability of this drug delivery system for use as a controlled-release system.

Development of lipid-based microsuspensions for improved ophthalmic delivery of gentamicin sulphate

2021 ◽  
Author(s):  
Adaeze Linda Onugwu ◽  
Chinazom Precious Agbo ◽  
Chinekwu Sherridan Nwagwu ◽  
Samuel Emeka Uzondu ◽  
Adaeze Chidiebere Echezona ◽  
...  
Keyword(s):  
Ex Vivo ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Eye Drops ◽  
Ex Vivo Permeation ◽  
Anterior Eye Segment ◽  
Ophthalmic Delivery ◽  
Gentamicin Sulphate ◽  
High Entrapment Efficiency

Aim: Anterior eye segment disorders are treated with eye drops and ointments, which have low ocular bioavailability necessitating the need for improved alternatives. Lipid microsuspension of gentamicin sulphate was developed for the treatment of susceptible eye diseases. Materials & methods: Lipid microsuspensions encapsulating gentamicin sulphate were produced by hot homogenization and evaluated. Ex vivo permeation and ocular irritancy tests were also conducted. Results & conclusion: Stable microsuspensions with high entrapment efficiency and satisfactory osmolarities were obtained. Release studies achieved 49–88% in vitro release at 12 h with sustained permeability of gentamicin compared with conventional gentamicin eye drop (Evril®). No irritation was observed following Draize’s test. The microsuspensions have great potential as ocular delivery system of gentamicin sulphate.

scholarly journals EFFECT OF PEGYLATED EDGE ACTIVATOR ON SPAN 60 BASED- NANOVESICLES: COMPARISON BETWEEN MYRJ 52 AND MYRJ 59

2019 ◽  
Author(s):  
Elsaied H. Elsaied ◽  
Hamdy M Dawaba ◽  
El Sherbini A Ibrahim ◽  
Mohsen I Afouna
Keyword(s):  
Polyethylene Glycol ◽  
Zeta Potential ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Potential Drug ◽  
Span 60 ◽  
Surface Modified ◽  
Vitro Release ◽  
Edge Activator

In recent years, Span 60 based nanovesicles have been the object of growing scientific attention as an alternative potential drug delivery system to conventional liposomes. Surface modification of nanovesicles can adjust the drug release rate and the affinity for the target site. The aim of present work was firstly to study the effects of different PEGylated edge activator (Myrj 52 and Myrj 59) on Span 60 based nanovesicles. Nanovesicles were prepared using Span 60 alone or in combination with Myrj 52 (polyethylene glycol 2000 monostearate) or Myrj 59 (polyethylene glycol 4400 monostearate) by employing the ethanol injection method. Myrj 52and Myrj 59 are hydrophilic nonionic surfactants were used to modify the surface of the developed vesicles. Dynamic light scattering was used to determine the size, zeta potential and polydispersity index of the nanovesicles formulation. The vesicles were also characterized for entrapment efficiency and in vitro release. In current work, the modified nanovesicles size (ranging from 54.32 to 141.7 nm), zeta potential (ranging from -5.67 to -27.1 mV) and polydispersity index (ranging from0.248 to 0.531) indicated that the surface modified nanovesicles vesicles are a homogenous and mono-disperse nanovesicles dispersions. The non-modified nanovesicles are showed higher particles size (>2 times) compared to modified nanovesicles. The modified nanovesicles were showed entrapment efficiency ranging from 36.42 to 78.13 %. All the modified nanovesicles showed accepted in vitro release of TN from nanovesicles (>70% released after 8 h), followed Higuchi models as drug release mechanism. In conclusion, these surface modified nanovesicles could be used as a potential drug carrier for a variety of drugs.

Preparation and In-vitro Evaluation of Fe3O4 Encapsulated by Chitosan Loaded Capecitabine Nanoparticles for the Treatment of Breast Cancer

2016 ◽  
Vol 6 (3) ◽  
Author(s):  
Shanmuganathan S. ◽  
Nigma S. ◽  
Anbarasan B. ◽  
Harika B.
Keyword(s):  
Fe3o4 Nanoparticles ◽  
Polymer Concentration ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
In Vitro Evaluation ◽  
Sem Image ◽  
Therapeutic Molecules ◽  
Dialysis Method ◽  
Vitro Release

Nanoparticulate Carriers which is biodegradable, biocompatible and bio adhesive have significant feasible applications for administration of therapeutic molecules. The present study was aimed to formulate and optimise Capecitabine loaded Chitosan-Fe3O4 Nanoparticles and to study the in-vitro evaluation by sigma dialysis method. Capecitabine loaded chitosan – Fe3O4 nanoparticles batches with different ratios of drug: polymer (1:1, 1:2, 1:3, 1:4, 1:5, 1:6) were prepared by ionic gelation method. Increase in polymer concentration increases the nanoparticle drug content. Entrapment efficiency was 60.12% with drug to polymer ratio F3 (1:3). In-vitro release was found to be 65.20% for 12 hrs. Capecitabine from chitosanFe3O4 nanoparticles SEM image reveals discrete spherical structure and particles with size range of 100-500nm. FTIR studies represent the functional groups present with no characteristics change in formulations. Samples stored at refrigerator conditions showed better stability compared with samples kept at other conditions during 8 weeks of storage.

Formulation and Evaluation of Mefloquine Hydrochloride Nanoparticles

2014 ◽  
Vol 7 (1) ◽  
pp. 2377-2386
Author(s):  
Dilip Kumar Gupta ◽  
B K Razdan ◽  
Meenakshi Bajpai
Keyword(s):  
Particle Size ◽  
Sustained Release ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Taste Masking ◽  
Diffusion Method ◽  
Drug Entrapment Efficiency ◽  
Resistant Strains ◽  
Vitro Release

The present study deals with the formulation and evaluation of mefloquine hydrochloride nanoparticles. Mefloquine is a blood schizonticidal quinoline compound, which is indicated for the treatment of mild-to-moderate acute malarial infections caused by mefloquine-susceptible multi-resistant strains of P. falciparum and P. vivax. The purpose of the present work is to minimize the dosing frequency, taste masking toxicity and to improve the therapeutic efficacy by formulating mefloquine HCl nanoparticles. Mefloquine nanoparticles were formulated by emulsion diffusion method using polymer poly(ε-caprolactone) with six different formulations. Nanoparticles were characterized by determining its particle size, polydispersity index, drug entrapment efficiency, drug content, particle morphological character and drug release. The particle size ranged between 100 nm to 240 nm. Drug entrapment efficacy was >95%. The in-vitro release of nanoparticles were carried out which exhibited a sustained release of mefloquine HCl from nanoparticles up to 24 hrs. The results showed that nanoparticles can be a promising drug delivery system for sustained release of mefloquine HCl.

Formulation and Evaluation of Itopride Hydrochloride Floating Beads for Gastroretentive Delivery

2013 ◽  
Vol 6 (4) ◽  
pp. 2269-2280
Author(s):  
Nagratna Dhople ◽  
P N Dandag ◽  
A P Gadad ◽  
C K Pandey ◽  
Masthiholimath V S
Keyword(s):  
Sustained Release ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Sustained Release Formulation ◽  
Prokinetic Drug ◽  
Drug Entrapment Efficiency ◽  
Itopride Hydrochloride ◽  
Vitro Release

A gastroretentive sustained release system of itopride hydrochloride was formulated to increase the gastric residence time and modulate its release behavior. Itopride hydrochloride is a prokinetic drug used in the treatment of gastroeosophageal reflux disease, Non-ulcer dyspepsia and as an antiemetic. Hence, itopride hydrochloride beads were prepared by emulsion gelation method by employing low methoxy pectin and sodium alginate as sustained release polymers in three different ratios alone and in combination and sunflower oil was used to enable floating property to the beads. The effect of variation in polymer and their concentration was investigated. The beads were evaluated for production yield, particle size, swelling index, density measurement, buoyancy, drug content, drug entrapment efficiency, in vitro release characteristics and release kinetic study. Based on drug entrapment efficiency, buoyancy, swelling and in vitro release, F9 was selected as the optimized formulation. F9 was further subjected to surface morphology by SEM, in vitro release comparison with marketed formulation, in vivo floating study in rabbits and stability study for 90 days. In vitro release follows zero order and fitted in Korsmeyer peppas model (Non-Fickian release). Therefore, the rate of drug release is due to the combined effect of drug diffusion and polymer swelling. The in vivo X-ray studies revealed that the beads were floating in the rabbit stomach up to 10 hours. Thus, it was concluded that the sustained release formulation containing itopride hydrochloride was found to improve patient compliance, minimize the side effects and decrease the frequency of administration.

Sign in / Sign up

Export Citation Format

Share Document