scholarly journals Biocompatible Electrospun Polycaprolactone-Polyaniline Scaffold Treated with Atmospheric Plasma to Improve Hydrophilicity

2021 ◽  
Vol 8 (2) ◽  
pp. 24
Author(s):  
Michela Licciardello ◽  
Gianluca Ciardelli ◽  
Chiara Tonda-Turo
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
Biological Response ◽  
Tissue Growth ◽  
Atmospheric Plasma ◽  
In Vitro Tests ◽  
Hydrophilic Surface ◽  
Nanofibrous Scaffolds ◽  
Cells Cultured

Conductive polymers (CPs) have recently been applied in the development of scaffolds for tissue engineering applications in attempt to induce additional cues able to enhance tissue growth. Polyaniline (PANI) is one of the most widely studied CPs, but it requires to be blended with other polymers in order to be processed through conventional technologies. Here, we propose the fabrication of nanofibers based on a polycaprolactone (PCL)-PANI blend obtained using electrospinning technology. An extracellular matrix-like fibrous substrate was obtained showing a good stability in the physiological environment (37 °C in PBS solution up 7 days). However, since the high hydrophobicity of the PCL-PANI mats (133.5 ± 2.2°) could negatively affect the biological response, a treatment with atmospheric plasma was applied on the nanofibrous mats, obtaining a hydrophilic surface (67.1 ± 2°). In vitro tests were performed to confirm the viability and the physiological-like morphology of human foreskin fibroblast (HFF-1) cells cultured on the plasma treated PCL-PANI nanofibrous scaffolds.

scholarly journals Cell-derived Extracellular Matrix as maintaining Biomaterial for adipogenic differentiation

2020 ◽  
Vol 6 (3) ◽  
pp. 410-413
Author(s):  
Petra J. Kluger ◽  
Svenja Nellinger ◽  
Simon Heine ◽  
Ann-Cathrin Volz
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
Adipogenic Differentiation ◽  
Cellular Activity ◽  
Adipose Tissue Engineering ◽  
Physical Support ◽  
Supporting Effect ◽  
Brdu Assay ◽  
The Impact

AbstractThe extracellular matrix (ECM) naturally surrounds cells in humans, and therefore represents the ideal biomaterial for tissue engineering. ECM from different tissues exhibit different composition and physical characteristics. Thus, ECM provides not only physical support but also contains crucial biochemical signals that influence cell adhesion, morphology, proliferation and differentiation. Next to native ECM from mature tissue, ECM can also be obtained from the in vitro culture of cells. In this study, we aimed to highlight the supporting effect of cell-derived- ECM (cdECM) on adipogenic differentiation. ASCs were seeded on top of cdECM from ASCs (scdECM) or pre-adipocytes (acdECM). The impact of ECM on cellular activity was determined by LDH assay, WST I assay and BrdU assay. A supporting effect of cdECM substrates on adipogenic differentiation was determined by oil red O staining and subsequent quantification. Results revealed no effect of cdECM substrates on cellular activity. Regarding adipogenic differentiation a supporting effect of cdECM substrates was obtained compared to control. With these results, we confirm cdECM as a promising biomaterial for adipose tissue engineering.

scholarly journals Recapitulating Cardiac Structure and Function In Vitro from Simple to Complex Engineering

Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 386
Author(s):  
Ana Santos ◽  
Yongjun Jang ◽  
Inwoo Son ◽  
Jongseong Kim ◽  
Yongdoo Park
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
Computational Modeling ◽  
Cardiac Tissue ◽  
Cardiac Development ◽  
Heart Tissue ◽  
Cardiac Tissue Engineering ◽  
Cardiac Cells

Cardiac tissue engineering aims to generate in vivo-like functional tissue for the study of cardiac development, homeostasis, and regeneration. Since the heart is composed of various types of cells and extracellular matrix with a specific microenvironment, the fabrication of cardiac tissue in vitro requires integrating technologies of cardiac cells, biomaterials, fabrication, and computational modeling to model the complexity of heart tissue. Here, we review the recent progress of engineering techniques from simple to complex for fabricating matured cardiac tissue in vitro. Advancements in cardiomyocytes, extracellular matrix, geometry, and computational modeling will be discussed based on a technology perspective and their use for preparation of functional cardiac tissue. Since the heart is a very complex system at multiscale levels, an understanding of each technique and their interactions would be highly beneficial to the development of a fully functional heart in cardiac tissue engineering.

Bioprinted Nanoparticles for Tissue Engineering Applications

2009 ◽  
Author(s):  
Kivilcim Buyukhatipoglu ◽  
Robert Chang ◽  
Wei Sun ◽  
Alisa Morss Clyne
Keyword(s):  
Tissue Engineering ◽  
Tissue Growth ◽  
Bioactive Components ◽  
Engineering Applications ◽  
Tissue Properties ◽  
Native Tissue ◽  
3D Architecture

Tissue engineering may require precise patterning of cells and bioactive components to recreate the complex, 3D architecture of native tissue. However, it is difficult to image and track cells and bioactive factors once they are incorporated into the tissue engineered construct. These bioactive factors and cells may also need to be moved during tissue growth in vitro or after implantation in vivo to achieve the desired tissue properties, or they may need to be removed entirely prior to implantation for biosafety concerns.

The effect of silk gland sericin protein incorporation into electrospun polycaprolactone nanofibers on in vitro and in vivo characteristics

2015 ◽  
Vol 3 (5) ◽  
pp. 859-870 ◽  
Author(s):  
Linhao Li ◽  
Yuna Qian ◽  
Chongwen Lin ◽  
Haibin Li ◽  
Chao Jiang ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Silk Gland ◽  
Engineering Applications ◽  
Nanofibrous Scaffolds ◽  
Protein Incorporation

Silk middle gland extracted sericin protein based electrospun nanofibrous scaffolds with excellent biocompatibility have been developed for tissue engineering applications.

Scaffolds in tissue engineering of blood vessels

2010 ◽  
Vol 88 (9) ◽  
pp. 855-873 ◽  
Author(s):  
Divya Pankajakshan ◽  
Devendra K. Agrawal
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
Blood Vessels ◽  
Vascular Tissue ◽  
Small Diameter ◽  
Biological Scaffolds ◽  
Hemodynamic Forces ◽  
Biodegradable Scaffolds

Tissue engineering of small diameter (<5 mm) blood vessels is a promising approach for developing viable alternatives to autologous vascular grafts. It involves in vitro seeding of cells onto a scaffold on which the cells attach, proliferate, and differentiate while secreting the components of extracellular matrix that are required for creating the tissue. The scaffold should provide the initial requisite mechanical strength to withstand in vivo hemodynamic forces until vascular smooth muscle cells and fibroblasts reinforce the extracellular matrix of the vessel wall. Hence, the choice of scaffold is crucial for providing guidance cues to the cells to behave in the required manner to produce tissues and organs of the desired shape and size. Several types of scaffolds have been used for the reconstruction of blood vessels. They can be broadly classified as biological scaffolds, decellularized matrices, and polymeric biodegradable scaffolds. This review focuses on the different types of scaffolds that have been designed, developed, and tested for tissue engineering of blood vessels, including use of stem cells in vascular tissue engineering.

An Innovative Ex Vivo Vascular Bioreactor as Comprehensive Tool to Study the Behavior of Native Blood Vessels Under Physiologically Relevant Conditions

2019 ◽  
Vol 2 (4) ◽  
Author(s):  
Noemi Vanerio ◽  
Marco Stijnen ◽  
Bas A. J. M. de Mol ◽  
Linda M. Kock
Keyword(s):  
Shear Stress ◽  
Blood Vessels ◽  
Ultrasound Imaging ◽  
Ex Vivo ◽  
Biological Response ◽  
Vessel Diameter ◽  
Tissue Growth ◽  
In Vivo Models

Abstract Ex vivo systems represent important models to study vascular biology and to test medical devices, combining the advantages of in vitro and in vivo models such as controllability of parameters and the presence of biological response, respectively. The aim of this study was to develop a comprehensive ex vivo vascular bioreactor to long-term culture and study the behavior of native blood vessels under physiologically relevant conditions. The system was designed to allow for physiological mechanical loading in terms of pulsatile hemodynamics, shear stress, and longitudinal prestretch and ultrasound imaging for vessel diameter and morphology evaluation. In this first experience, porcine carotid arteries (n = 4) from slaughterhouse animals were cultured in the platform for 10 days at physiological temperature, CO2 and humidity using medium with blood-mimicking viscosity, components, and stability of composition. As expected, a significant increase in vessel diameter was observed during culture. Flow rate was adjusted according to diameter values to reproduce and maintain physiological shear stress, while pressure was kept physiological. Ultrasound imaging showed that the morphology and structure of cultured arteries were comparable to in vivo. Histological analyses showed preserved endothelium and extracellular matrix and neointimal tissue growth over 10 days of culture. In conclusion, we have developed a comprehensive pulsatile system in which a native blood vessel can be cultured under physiological conditions. The present model represents a significant step toward ex vivo testing of vascular therapies, devices, drug interaction, and as basis for further model developments.

Effects of Hydrostatic Pressure on Meniscus Cell-Seeded PLLA Scaffolds

2007 ◽  
Author(s):  
Najmuddin J. Gunja ◽  
Kyriacos A. Athanasiou
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
Hydrostatic Pressure ◽  
Mechanical Stimuli ◽  
Loading Conditions ◽  
Engineering Studies ◽  
Meniscus Cell ◽  
Intermittent Loading ◽  
Cartilage Explant

Cartilage explant studies have shown that mechanical stimuli increase extracellular matrix (ECM) expression and synthesis in vitro [1]. The use of hydrostatic pressure (HP), as a loading regimen, is of particular interest as it causes no cellular deformation. This may be useful in tissue engineering studies where scaffolds with limited mechanical integrity need to withstand intermittent loading conditions. Studies investigating the effect of HP on 3-D cultures of chondrocytes have met with modest success [2, 3]; however literature on meniscal fibrochondrocytes is lacking.

scholarly journals PEG Graft Polymer Carriers of Antioxidants: In Vitro Evaluation for Transdermal Delivery

Pharmaceutics ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 1178
Author(s):  
Justyna Odrobińska ◽  
Magdalena Skonieczna ◽  
Dorota Neugebauer
Keyword(s):  
Cell Lines ◽  
Graft Copolymers ◽  
Biological Response ◽  
Annexin V ◽  
Dermal Fibroblasts ◽  
In Vitro Tests ◽  
Side Chains ◽  
Skin Cell ◽  
Active Substances

The in vitro biochemical evaluation of the applicability of polymers carrying active substances (micelles and conjugates) was carried out. Previously designed amphiphilic graft copolymers with retinol or 4-n-butylresorcinol functionalized polymethacrylate backbone and poly(ethylene glycol) (PEG) side chains that included Janus-type heterografted copolymers containing both PEG and poly(ε-caprolactone) (PCL) side chains were applied as micellar carriers. The polymer self-assemblies were convenient to encapsulate arbutin (ARB) as the selected active substances. Moreover, the conjugates of PEG graft copolymers with ferulic acid (FA) or lipoic acid (LA) were also investigated. The permeability of released active substances through a membrane mimicking skin was evaluated by conducting transdermal tests in Franz diffusion cells. The biological response to new carriers with active substances was tested across cell lines, including normal human dermal fibroblasts (NHDF), human epidermal keratinocyte (HaCaT), as well as cancer melanoma (Me45) and metastatic human melanoma (451-Lu), for comparison. These polymer systems were safe and non-cytotoxic at the tested concentrations for healthy skin cell lines according to the MTT test. Cytometric evaluation of cell cycles as well as cell death defined by Annexin-V apoptosis assays and senescence tests showed no significant changes under action of the delivery systems, as compared to the control cells. In vitro tests confirmed the biochemical potential of these antioxidant carriers as beneficial components in cosmetic products, especially applied in the form of masks and eye pads.

Fabrication, characterisation and in vitro biological activities of a sulfuretin-supplemented nanofibrous composite scaffold for tissue engineering

RSC Advances ◽  
2015 ◽  
Vol 5 (56) ◽  
pp. 44943-44952 ◽  
Author(s):  
YoungWon Koo ◽  
Hyeongjin Lee ◽  
Suji Kim ◽  
No-Joon Song ◽  
Jin-Mo Ku ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue ◽  
Composite Scaffold ◽  
Biological Activities ◽  
Tissue Growth ◽  
Biological Component

A biocomposite consisting of PCL/BMP-2 and sulfuretin/alginate was proposed. Evaluation of in vitro cellular activities demonstrated that the sulfuretin can act as an outstanding biological component for enhancing bone tissue growth.

In Vitro Cytotoxicity Study of the Nano-Hydroxyapatite/Bacterial Cellulose Nanocomposites

2009 ◽  
Vol 610-613 ◽  
pp. 1011-1016 ◽  
Author(s):  
Yan Mei Chen ◽  
Ting Fei Xi ◽  
Yu Dong Zheng ◽  
Yi Zao Wan
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bacterial Cellulose ◽  
Bone Tissue ◽  
Biological Response ◽  
Biological Properties ◽  
In Vitro Cytotoxicity ◽  
National Standard ◽  
Target Cells

The nanocomposite of nano-hydroxyapatite/bacterial cellulose (nHA/BC) obtained by depositing in simulated body fluid (SBF), incorporating their excellent mechanical and biological properties, is expected to have potential applications in bone tissue engineering. However, the biological response evaluation of biomaterials is required to provide useful information to improve their design and application. In this article, the in vitro cytotoxicity of composites nHA/BC as well as its degradation residues was studied. Scanning electron microscopy (SEM) was used to observe the morphology of original materials and their degradation residues. The degree of degradation was evalued by measuring the concentration of reducing sugar (glucose) by ultraviolet spectrophotometer. Bone-forming osteoblasts (OB) and infinite culture cell line L929 fibroblasts were used to measure the cytotocixity of materials with MTT assay. Both kinds of cells in infusion proliferate greatly in a normal form and their relative growth rate (RGR) exceeds by 75%, which shows the cytotoxicity of materials is graded as 0~1, according to the national standard. Nevertheless, bone-forming OB cells, as a kind of target cells, are more susceptive on the cytotoxicity than infinite culture fibroblast cells L929. The results suggest the nanocomposite of nHA/BC without cytotoxicity is greatly promising as a kind of scaffold materials for bone tissue engineering and tissue functional cells are more suited to evaluate the cytotoxicity of biomedical materials.

Sign in / Sign up

Export Citation Format

Share Document