scholarly journals Spatial Patterns and Temporal Changes in Atmospheric-Mercury Deposition for the Midwestern USA, 2001–2016

Atmosphere ◽  
2018 ◽  
Vol 9 (1) ◽  
pp. 29 ◽  
Author(s):  
Martin Risch ◽  
Donna Kenski
Keyword(s):  
Spatial Patterns ◽  
Temporal Changes ◽  
Atmospheric Mercury ◽  
Mercury Deposition ◽  
Midwestern Usa

scholarly journals Characteristics of atmospheric mercury deposition and size-fractionated particulate mercury in urban Nanjing, China

2014 ◽  
Vol 14 (5) ◽  
pp. 2233-2244 ◽  
Author(s):  
J. Zhu ◽  
T. Wang ◽  
R. Talbot ◽  
H. Mao ◽  
X. Yang ◽  
...  
Keyword(s):  
Dry Deposition ◽  
Wet Deposition ◽  
Fine Particles ◽  
Unit Area ◽  
Atmospheric Mercury ◽  
Anthropogenic Sources ◽  
Deposition Flux ◽  
Coarse Particles ◽  
Mercury Deposition ◽  
Particulate Mercury

Abstract. A comprehensive measurement study of mercury wet deposition and size-fractionated particulate mercury (HgP) concurrent with meteorological variables was conducted from June 2011 to February 2012 to evaluate the characteristics of mercury deposition and particulate mercury in urban Nanjing, China. The volume-weighted mean (VWM) concentration of mercury in rainwater was 52.9 ng L−1 with a range of 46.3–63.6 ng L−1. The wet deposition per unit area was averaged 56.5 μg m−2 over 9 months, which was lower than that in most Chinese cities, but much higher than annual deposition in urban North America and Japan. The wet deposition flux exhibited obvious seasonal variation strongly linked with the amount of precipitation. Wet deposition in summer contributed more than 80% to the total amount. A part of contribution to wet deposition of mercury from anthropogenic sources was evidenced by the association between wet deposition and sulfates, as well as nitrates in rainwater. The ions correlated most significantly with mercury were formate, calcium, and potassium, which suggested that natural sources including vegetation and resuspended soil should be considered as an important factor to affect the wet deposition of mercury in Nanjing. The average HgP concentration was 1.10 ± 0.57 ng m−3. A distinct seasonal distribution of HgP concentrations was found to be higher in winter as a result of an increase in the PM10 concentration. Overall, more than half of the HgP existed in the particle size range less than 2.1 μm. The highest concentration of HgP in coarse particles was observed in summer, while HgP in fine particles dominated in fall and winter. The size distribution of averaged mercury content in particulates was bimodal, with two peaks in the bins of < 0.7 μm and 4.7–5.8 μm. Dry deposition per unit area of HgP was estimated to be 47.2 μg m−2 using meteorological conditions and a size-resolved particle dry deposition model. This was 16.5% less than mercury wet deposition. Compared to HgP in fine particles, HgP in coarse particles contributed more to the total dry deposition due to higher deposition velocities. Negative correlation between precipitation and the HgP concentration reflected the effect of scavenging of HgP by precipitation.

Gaseous mercury in coastal urban areas

2010 ◽  
Vol 7 (6) ◽  
pp. 537 ◽  
Author(s):  
Anne L. Soerensen ◽  
Henrik Skov ◽  
Matthew S. Johnson ◽  
Marianne Glasius
Keyword(s):  
Urban Areas ◽  
Marine Boundary Layer ◽  
Elemental Mercury ◽  
Atmospheric Mercury ◽  
Mercury Deposition ◽  
Mercury Emissions ◽  
Gaseous Elemental Mercury ◽  
Gaseous Mercury ◽  
Range Transport ◽  
Aquatic Food

Environmental context Mercury is a neurotoxin that bioaccumulates in the aquatic food web. Atmospheric emissions from urban areas close to the coast could cause increased local mercury deposition to the ocean. Our study adds important new data to the current limited knowledge on atmospheric mercury emissions and dynamics in coastal urban areas. Abstract Approximately 50% of primary atmospheric mercury emissions are anthropogenic, resulting from e.g. emission hotspots in urban areas. Emissions from urban areas close to the coast are of interest because they could increase deposition loads to nearby coastal waters as well as contribute to long range transport of mercury. We present results from measurements of gaseous elemental mercury (GEM) and reactive gaseous mercury (RGM) in 15 coastal cities and their surrounding marine boundary layer (MBL). An increase of 15–90% in GEM concentration in coastal urban areas was observed compared with the remote MBL. Strong RGM enhancements were only found in two cities. In urban areas with statistically significant GEM/CO enhancement ratios, slopes between 0.0020 and 0.0087 ng m–3 ppb–1 were observed, which is consistent with other observations of anthropogenic enhancement. The emission ratios were used to estimate GEM emissions from the areas. A closer examination of data from Sydney (Australia), the coast of Chile, and Valparaiso region (Chile) in the southern hemisphere, is presented.

scholarly journals Model analyses of atmospheric mercury: present air quality and effects of transpacific transport on the United States

2013 ◽  
Vol 13 (4) ◽  
pp. 9849-9893 ◽  
Author(s):  
H. Lei ◽  
X.-Z. Liang ◽  
D. J. Wuebbles ◽  
Z. Tao
Keyword(s):  
United States ◽  
Air Quality ◽  
Wet Deposition ◽  
Total Mercury ◽  
The United States ◽  
Atmospheric Mercury ◽  
Anthropogenic Sources ◽  
Mercury Deposition ◽  
Transpacific Transport ◽  
Mercury Cycle

Abstract. Atmospheric mercury is a toxic air and water pollutant that is of significant concern because of its effects on human health and ecosystems. A mechanistic representation of the atmospheric mercury cycle is developed for the state-of-the-art global climate-chemistry model, CAM-Chem (Community Atmospheric Model with Chemistry). The model simulates the emission, transport, transformation and deposition of atmospheric mercury (Hg) in three forms: elemental mercury (Hg(0)), reactive mercury (Hg(II)), and particulate mercury (PHg). Emissions of mercury include those from human, land, ocean, biomass burning and volcano related sources. Land emissions are calculated based on surface solar radiation flux and skin temperature. A simplified air–sea mercury exchange scheme is used to calculate emissions from the oceans. The chemistry mechanism includes the oxidation of Hg(0) in gaseous phase by ozone with temperature dependence, OH, H2O2 and chlorine. Aqueous chemistry includes both oxidation and reduction of Hg(0). Transport and deposition of mercury species are calculated through adapting the original formulations in CAM-Chem. The CAM-Chem model with mercury is driven by present meteorology to simulate the present mercury air quality during the 1999–2001 periods. The resulting surface concentrations of total gaseous mercury (TGM) are then compared with the observations from worldwide sites. Simulated wet depositions of mercury over the continental United States are compared to the observations from 26 Mercury Deposition Network stations to test the wet deposition simulations. The evaluations of gaseous concentrations and wet deposition confirm a strong capability for the CAM-Chem mercury mechanism to simulate the atmospheric mercury cycle. The results also indicate that mercury pollution in East Asia and Southern Africa is very significant with TGM concentrations above 3.0 ng m−3. The comparison to wet deposition indicates that wet deposition patterns of mercury are more affected by the spatial variability of precipitation. The sensitivity experiments show that 22% of total mercury deposition and 25% of TGM concentrations in the United States are resulted from domestic anthropogenic sources, but only 9% of total mercury deposition and 7% of TGM concentrations are contributed by transpacific transport. However, the contributions of domestic and transpacific sources on the western United States levels of mercury are of comparable magnitude.

scholarly journals Atmospheric mercury deposition over the land surfaces and the associated uncertainties in observations and simulations: a critical review

2019 ◽  
Vol 19 (24) ◽  
pp. 15587-15608 ◽  
Author(s):  
Lei Zhang ◽  
Peisheng Zhou ◽  
Shuzhen Cao ◽  
Yu Zhao
Keyword(s):  
Dry Deposition ◽  
Wet Deposition ◽  
Quantitative Methods ◽  
Experimental System ◽  
Elemental Mercury ◽  
Atmospheric Mercury ◽  
Future Research ◽  
Observation Data ◽  
Mercury Deposition ◽  
Land Surfaces

Abstract. One of the most important processes in the global mercury (Hg) biogeochemical cycling is the deposition of atmospheric Hg, including gaseous elemental mercury (GEM), gaseous oxidized mercury (GOM), and particulate-bound mercury (PBM), to the land surfaces. Results of wet, dry, and forest Hg deposition from global observation networks, individual monitoring studies, and observation-based simulations have been reviewed in this study. Uncertainties in the observation and simulation of global speciated atmospheric Hg deposition to the land surfaces have been systemically estimated based on assessment of commonly used observation methods, campaign results for comparison of different methods, model evaluation with observation data, and sensitivity analysis for model parameterization. The uncertainties of GOM and PBM dry deposition measurements come from the interference of unwanted Hg forms or incomplete capture of targeted Hg forms, while that of GEM dry deposition observation originates from the lack of a standardized experimental system and operating procedure. The large biases in the measurements of GOM and PBM concentrations and the high sensitivities of key parameters in resistance models lead to high uncertainties in GOM and PBM dry deposition simulation. Non-precipitation Hg wet deposition could play a crucial role in alpine and coastal regions, and its high uncertainties in both observation and simulation affect the overall uncertainties of Hg wet deposition. The overall uncertainties in the observation and simulation of the total global Hg deposition were estimated to be ± (25–50) % and ± (45–70) %, respectively, with the largest contributions from dry deposition. According to the results from uncertainty analysis, future research needs were recommended, among which a global Hg dry deposition network, unified methods for GOM and PBM dry deposition measurements, quantitative methods for GOM speciation, campaigns for comprehensive forest Hg behavior, and more efforts in long-term Hg deposition monitoring in Asia are the top priorities.

scholarly journals Global atmospheric model for mercury including oxidation by bromine atoms

2010 ◽  
Vol 10 (24) ◽  
pp. 12037-12057 ◽  
Author(s):  
C. D. Holmes ◽  
D. J. Jacob ◽  
E. S. Corbitt ◽  
J. Mao ◽  
X. Yang ◽  
...  
Keyword(s):  
Gas Phase ◽  
Atmospheric Model ◽  
Atmospheric Mercury ◽  
The Arctic ◽  
Deposition Flux ◽  
Mercury Deposition ◽  
Photochemical Reduction ◽  
Global Atmospheric Model ◽  
Summer Maximum ◽  
Southeast Us

Abstract. Global models of atmospheric mercury generally assume that gas-phase OH and ozone are the main oxidants converting Hg0 to HgII and thus driving mercury deposition to ecosystems. However, thermodynamic considerations argue against the importance of these reactions. We demonstrate here the viability of atomic bromine (Br) as an alternative Hg0 oxidant. We conduct a global 3-D simulation with the GEOS-Chem model assuming gas-phase Br to be the sole Hg0 oxidant (Hg + Br model) and compare to the previous version of the model with OH and ozone as the sole oxidants (Hg + OH/O3 model). We specify global 3-D Br concentration fields based on our best understanding of tropospheric and stratospheric Br chemistry. In both the Hg + Br and Hg + OH/O3 models, we add an aqueous photochemical reduction of HgII in cloud to impose a tropospheric lifetime for mercury of 6.5 months against deposition, as needed to reconcile observed total gaseous mercury (TGM) concentrations with current estimates of anthropogenic emissions. This added reduction would not be necessary in the Hg + Br model if we adjusted the Br oxidation kinetics downward within their range of uncertainty. We find that the Hg + Br and Hg + OH/O3 models are equally capable of reproducing the spatial distribution of TGM and its seasonal cycle at northern mid-latitudes. The Hg + Br model shows a steeper decline of TGM concentrations from the tropics to southern mid-latitudes. Only the Hg + Br model can reproduce the springtime depletion and summer rebound of TGM observed at polar sites; the snowpack component of GEOS-Chem suggests that 40% of HgII deposited to snow in the Arctic is transferred to the ocean and land reservoirs, amounting to a net deposition flux to the Arctic of 60 Mg a−1. Summertime events of depleted Hg0 at Antarctic sites due to subsidence are much better simulated by the Hg + Br model. Model comparisons to observed wet deposition fluxes of mercury in the US and Europe show general consistency. However the Hg + Br model does not capture the summer maximum over the southeast US because of low subtropical Br concentrations while the Hg + OH/O3 model does. Vertical profiles measured from aircraft show a decline of Hg0 above the tropopause that can be captured by both the Hg + Br and Hg + OH/O3 models, except in Arctic spring where the observed decline is much steeper than simulated by either model; we speculate that oxidation by Cl species might be responsible. The Hg + Br and Hg + OH/O3 models yield similar global budgets for the cycling of mercury between the atmosphere and surface reservoirs, but the Hg + Br model results in a much larger fraction of mercury deposited to the Southern Hemisphere oceans.

Peat bog records of atmospheric mercury deposition

Nature ◽  
1981 ◽  
Vol 293 (5828) ◽  
pp. 127-130 ◽  
Author(s):  
Poul Pheiffer Madsen
Keyword(s):  
Atmospheric Mercury ◽  
Peat Bog ◽  
Mercury Deposition

Methylmercury in Mosquitoes Related to Atmospheric Mercury Deposition and Contamination

2005 ◽  
Vol 39 (9) ◽  
pp. 3034-3039 ◽  
Author(s):  
Chad R. Hammerschmidt ◽  
William F. Fitzgerald
Keyword(s):  
Atmospheric Mercury ◽  
Mercury Deposition
Sign in / Sign up

Export Citation Format

Share Document