scholarly journals Turbulence, Low-Level Jets, and Waves in the Tyrrhenian Coastal Zone as Shown by Sodar

Atmosphere ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 28 ◽  
Author(s):  
Igor Petenko ◽  
Giampietro Casasanta ◽  
Simone Bucci ◽  
Margarita Kallistratova ◽  
Roberto Sozzi ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Atmospheric Boundary Layer ◽  
Vertical Wind ◽  
Land Breeze ◽  
Tyrrhenian Sea ◽  
Turbulent Layer ◽  
Low Level ◽  
Doppler Sodar ◽  
Low Level Jets

The characteristics of the vertical and temporal structure of the coastal atmospheric boundary layer are variable for different sites and are often not well known. Continuous monitoring of the atmospheric boundary layer was carried out close to the Tyrrhenian Sea, near Tarquinia (Italy), in 2015–2017. A ground-based remote sensing instrument (triaxial Doppler sodar) and in situ sensors (meteorological station, ultrasonic anemometer/thermometer, and net radiometer) were used to measure vertical wind velocity profiles, the thermal structure of the atmosphere, the height of the turbulent layer, turbulent heat and momentum fluxes in the surface layer, atmospheric radiation, and precipitation. Diurnal alternation of the atmospheric stability types governed by the solar cycle coupled with local sea/land breeze circulation processes is found to be variable and is classified into several main regimes. Low-level jets (LLJ) at heights of 100–300 m above the surface with maximum wind speed in the range of 5–18 m s−1 occur in land breezes, both during the night and early in the morning. Empirical relationships between the LLJ core wind speed characteristics and those near the surface are obtained. Two separated turbulent sub-layers, both below and above the LLJ core, are often observed, with the upper layer extending up to 400–600 m. Kelvin–Helmholtz billows associated with internal gravity–shear waves occurring in these layers present opposite slopes, in correspondence with the sign of vertical wind speed gradients. Our observational results provide a basis for the further development of theoretical and modelling approaches, taking into account the wave processes occurring in the atmospheric boundary layer at the land–sea interface.

Estimation of Dissipative Heating Using Low-Level In Situ Aircraft Observations in the Hurricane Boundary Layer

2010 ◽  
Vol 67 (6) ◽  
pp. 1853-1862 ◽  
Author(s):  
Jun A. Zhang
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Atmospheric Boundary Layer ◽  
Surface Wind ◽  
Surface Wind Speed ◽  
Dissipative Heating ◽  
Eddy Correlation ◽  
Low Level ◽  
Hurricane Boundary Layer ◽  
Rate Of Dissipation

Abstract Data collected in the low-level atmospheric boundary layer in five hurricanes by NOAA research aircraft are analyzed to measure turbulence with scales small enough to retrieve the rate of dissipation. A total of 49 flux runs suitable for analysis are identified in the atmospheric boundary layer within 200 m above the sea surface. Momentum fluxes are directly determined using the eddy correlation method, and drag coefficients are also calculated. The dissipative heating is estimated using two different methods: 1) integrating the rate of dissipation in the surface layer and 2) multiplying the drag coefficient by the cube of surface wind speed. While the latter method has been widely used in theoretical models as well as several numerical models simulating hurricanes, these analyses show that using this method would significantly overestimate the magnitude of dissipative heating. Although the dataset used in this study is limited by the surface wind speed range <30 m s−1, this work highlights that it is crucial to understand the physical processes related to dissipative heating in the hurricane boundary layer for implementing it into hurricane models.

scholarly journals Interactions Between the Nocturnal Low-Level Jets and the Urban Boundary Layer: A Case Study over London

2022 ◽  
Author(s):  
Aristofanis Tsiringakis ◽  
Natalie E. Theeuwes ◽  
Janet F. Barlow ◽  
Gert-Jan Steeneveld
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Urban Areas ◽  
Prediction Models ◽  
Weather Prediction ◽  
Urban Boundary Layer ◽  
Limited Area ◽  
Low Level ◽  
Low Level Jets

AbstractUnderstanding the physical processes that affect the turbulent structure of the nocturnal urban boundary layer (UBL) is essential for improving forecasts of air quality and the air temperature in urban areas. Low-level jets (LLJs) have been shown to affect turbulence in the nocturnal UBL. We investigate the interaction of a mesoscale LLJ with the UBL during a 60-h case study. We use observations from two Doppler lidars and results from two high-resolution numerical-weather-prediction models (Weather Research and Forecasting model, and the Met Office Unified Model for limited-area forecasts for the U.K.) to study differences in the occurrence frequency, height, wind speed, and fall-off of LLJs between an urban (London, U.K.) and a rural (Chilbolton, U.K.) site. The LLJs are elevated ($$\approx $$ ≈ 70 m) over London, due to the deeper UBL, while the wind speed and fall-off are slightly reduced with respect to the rural LLJ. Utilizing two idealized experiments in the WRF model, we find that topography strongly affects LLJ characteristics, but there is still a substantial urban influence. Finally, we find that the increase in wind shear under the LLJ enhances the shear production of turbulent kinetic energy and helps to maintain the vertical mixing in the nocturnal UBL.

scholarly journals Wind–Temperature Regime and Wind Turbulence in a Stable Boundary Layer of the Atmosphere: Case Study

2020 ◽  
Vol 12 (6) ◽  
pp. 955 ◽  
Author(s):  
Viktor A. Banakh ◽  
Igor N. Smalikho ◽  
Andrey V. Falits
Keyword(s):  
Boundary Layer ◽  
Atmospheric Boundary Layer ◽  
Stable Boundary Layer ◽  
Richardson Number ◽  
Atmospheric Waves ◽  
Stable Boundary ◽  
Low Level ◽  
Wind Turbulence ◽  
Stable Atmospheric Boundary Layer ◽  
Low Level Jets

The paper presents the results of probing the stable atmospheric boundary layer in the coastal zone of Lake Baikal with a coherent Doppler wind lidar and a microwave temperature profiler. Two-dimensional height–temporal distributions of the wind velocity vector components, temperature, and parameters characterizing atmospheric stability and wind turbulence were obtained. The parameters of the low-level jets and the atmospheric waves arising in the stable boundary layer were determined. It was shown that the stable atmospheric boundary layer has an inhomogeneous fine scale layered structure characterized by strong variations of the Richardson number Ri. Layers with large Richardson numbers alternate with layers where Ri is less than the critical value of the Richardson number Ricr = 0.25. The channels of decreased stability, where the conditions are close to neutral stratification 0 < Ri < 0.25, arise in the zone of the low-level jets. The wind turbulence in the central part of the observed jets, where Ri > Ricr, is weak, increases considerably to the periphery of jets, at heights where Ri < Ricr. The turbulence may intensify at the appearance of internal atmospheric waves.

scholarly journals LABLE: A Multi-Institutional, Student-Led, Atmospheric Boundary Layer Experiment

2015 ◽  
Vol 96 (10) ◽  
pp. 1743-1764 ◽  
Author(s):  
P. Klein ◽  
T. A. Bonin ◽  
J. F. Newman ◽  
D. D. Turner ◽  
P. B. Chilson ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Atmospheric Boundary Layer ◽  
Great Plains ◽  
Low Cost ◽  
Lawrence Livermore National Laboratory ◽  
National Laboratory ◽  
Heterogeneous Terrain ◽  
Thermodynamic Structure ◽  
Low Level ◽  
Low Level Jets

Abstract This paper presents an overview of the Lower Atmospheric Boundary Layer Experiment (LABLE), which included two measurement campaigns conducted at the Atmospheric Radiation Measurement (ARM) Program Southern Great Plains site in Oklahoma during 2012 and 2013. LABLE was conducted as a collaborative effort between the University of Oklahoma (OU), the National Severe Storms Laboratory, Lawrence Livermore National Laboratory (LLNL), and the ARM program. LABLE can be considered unique in that it was designed as a multiphase, low-cost, multiagency collaboration. Graduate students served as principal investigators and took the lead in designing and conducting experiments aimed at examining boundary layer processes. The main objective of LABLE was to study turbulent phenomena in the lowest 2 km of the atmosphere over heterogeneous terrain using a variety of novel atmospheric profiling techniques. Several instruments from OU and LLNL were deployed to augment the suite of in situ and remote sensing instruments at the ARM site. The complementary nature of the deployed instruments with respect to resolution and height coverage provides a near-complete picture of the dynamic and thermodynamic structure of the atmospheric boundary layer. This paper provides an overview of the experiment including 1) instruments deployed, 2) sampling strategies, 3) parameters observed, and 4) student involvement. To illustrate these components, the presented results focus on one particular aspect of LABLE: namely, the study of the nocturnal boundary layer and the formation and structure of nocturnal low-level jets. During LABLE, low-level jets were frequently observed and they often interacted with mesoscale atmospheric disturbances such as frontal passages.

scholarly journals A Climatology of Nocturnal Low-Level Jets at Cabauw

2009 ◽  
Vol 48 (8) ◽  
pp. 1627-1642 ◽  
Author(s):  
P. Baas ◽  
F. C. Bosveld ◽  
H. Klein Baltink ◽  
A. A. M. Holtslag
Keyword(s):  
Wind Speed ◽  
Ground Level ◽  
Geostrophic Wind ◽  
Stable Stratification ◽  
Radiative Cooling ◽  
Inertial Oscillation ◽  
Stable Boundary Layers ◽  
Above Ground Level ◽  
Low Level ◽  
Low Level Jets

Abstract A climatology of nocturnal low-level jets (LLJs) is presented for the topographically flat measurement site at Cabauw, the Netherlands. LLJ characteristics are derived from a 7-yr half-hourly database of wind speed profiles, obtained from the 200-m mast and a wind profiler. Many LLJs at Cabauw originate from an inertial oscillation, which develops after sunset in a layer decoupled from the surface by stable stratification. The data are classified to different types of stable boundary layers by using the geostrophic wind speed and the isothermal net radiative cooling as classification parameters. For each of these classes, LLJ characteristics like frequency of occurrence, height above ground level, and the turning of the wind vector across the boundary layer are determined. It is found that LLJs occur in about 20% of the nights, are typically situated at 140–260 m above ground level, and have a speed of 6–10 m s−1. Development of a substantial LLJ is most likely to occur for moderate geostrophic forcing and a high radiative cooling. A comparison with the 40-yr ECMWF Re-Analysis (ERA-40) is added to illustrate how the results can be used to evaluate the performance of atmospheric models.

Role of low-level jets and boundary-layer properties on the NBL budget technique

2005 ◽  
Vol 135 (1-4) ◽  
pp. 35-43 ◽  
Author(s):  
N. Mathieu ◽  
I.B. Strachan ◽  
M.Y. Leclerc ◽  
A. Karipot ◽  
E. Pattey
Keyword(s):  
Boundary Layer ◽  
Low Level ◽  
Low Level Jets
Sign in / Sign up

Export Citation Format

Share Document