scholarly journals Urban Trees and Their Impact on Local Ozone Concentration—A Microclimate Modeling Study

Atmosphere ◽  
2019 ◽  
Vol 10 (3) ◽  
pp. 154 ◽  
Author(s):  
Helge Simon ◽  
Joachim Fallmann ◽  
Tim Kropp ◽  
Holger Tost ◽  
Michael Bruse
Keyword(s):  
Air Quality ◽  
Urban Planning ◽  
Ozone Concentration ◽  
Green Infrastructure ◽  
Urban Areas ◽  
Urban Trees ◽  
Box Model ◽  
Dominant Factor ◽  
Isoprene Emission ◽  
The Impact

Climate sensitive urban planning involves the implementation of green infrastructure as one measure to mitigate excessive heat in urban areas. Depending on thermal conditions, certain trees tend to emit more biogenic volatile organic compounds, which act as precursors for ozone formation, thus hampering air quality. Combining a theoretical approach from a box model analysis and microscale modeling from the microclimate model ENVI-met, we analyze this relationship for a selected region in Germany and provide the link to air quality prediction and climate sensitive urban planning. A box model study was conducted, indicating higher ozone levels with higher isoprene concentration, especially in NO-saturated atmospheres. ENVI-met sensitivity studies showed that different urban layouts strongly determine local isoprene emissions of vegetation, with leaf temperature, rather than photosynthetic active radiation, being the dominant factor. The impact of isoprene emission on the ozone in complex urban environments was simulated for an urban area for a hot summer day with and without isoprene. A large isoprene-induced relative ozone increase was found over the whole model area. On selected hot spots we find a clear relationship between urban layout, proximity to NOx emitters, tree-species-dependent isoprene emission capacity, and increases in ozone concentration, rising up to 500% locally.

scholarly journals Monitoring the Spatial Variation of Aerosol Optical Depth and Its Correlation with Land Use/Land Cover in Wuhan, China: A Perspective of Urban Planning

2021 ◽  
Vol 18 (3) ◽  
pp. 1132
Author(s):  
Qijiao Xie ◽  
Qi Sun
Keyword(s):  
Land Use ◽  
Air Quality ◽  
Urban Planning ◽  
Land Cover ◽  
Aerosol Optical Depth ◽  
Optical Depth ◽  
Water Bodies ◽  
Landsat 8 ◽  
Land Use Land Cover ◽  
The Impact

Aerosols significantly affect environmental conditions, air quality, and public health locally, regionally, and globally. Examining the impact of land use/land cover (LULC) on aerosol optical depth (AOD) helps to understand how human activities influence air quality and develop suitable solutions. The Landsat 8 image and Moderate Resolution Imaging Spectroradiometer (MODIS) aerosol products in summer in 2018 were used in LULC classification and AOD retrieval in this study. Spatial statistics and correlation analysis about the relationship between LULC and AOD were performed to examine the impact of LULC on AOD in summer in Wuhan, China. Results indicate that the AOD distribution expressed an obvious “basin effect” in urban development areas: higher AOD values concentrated in water bodies with lower terrain, which were surrounded by the high buildings or mountains with lower AOD values. The AOD values were negatively correlated with the vegetated areas while positively correlated to water bodies and construction lands. The impact of LULC on AOD varied with different contexts in all cases, showing a “context effect”. The regression correlations among the normalized difference vegetation index (NDVI), normalized difference built-up index (NDBI), normalized difference water index (NDWI), and AOD in given landscape contexts were much stronger than those throughout the whole study area. These findings provide sound evidence for urban planning, land use management and air quality improvement.

scholarly journals Modelling the impact of megacities on local, regional and global tropospheric ozone and the deposition of nitrogen species

2013 ◽  
Vol 13 (24) ◽  
pp. 12215-12231 ◽  
Author(s):  
Z. S. Stock ◽  
M. R. Russo ◽  
T. M. Butler ◽  
A. T. Archibald ◽  
M. G. Lawrence ◽  
...  
Keyword(s):  
Air Quality ◽  
Urban Areas ◽  
Climate Model ◽  
Surface Ozone ◽  
Global Scale ◽  
Chemical Environment ◽  
Ozone Production ◽  
The Uk ◽  
The Impact ◽  
Local Emissions

Abstract. We examine the effects of ozone precursor emissions from megacities on present-day air quality using the global chemistry–climate model UM-UKCA (UK Met Office Unified Model coupled to the UK Chemistry and Aerosols model). The sensitivity of megacity and regional ozone to local emissions, both from within the megacity and from surrounding regions, is important for determining air quality across many scales, which in turn is key for reducing human exposure to high levels of pollutants. We use two methods, perturbation and tagging, to quantify the impact of megacity emissions on global ozone. We also completely redistribute the anthropogenic emissions from megacities, to compare changes in local air quality going from centralised, densely populated megacities to decentralised, lower density urban areas. Focus is placed not only on how changes to megacity emissions affect regional and global NOx and O3, but also on changes to NOy deposition and to local chemical environments which are perturbed by the emission changes. The perturbation and tagging methods show broadly similar megacity impacts on total ozone, with the perturbation method underestimating the contribution partially because it perturbs the background chemical environment. The total redistribution of megacity emissions locally shifts the chemical environment towards more NOx-limited conditions in the megacities, which is more conducive to ozone production, and monthly mean surface ozone is found to increase up to 30% in megacities, depending on latitude and season. However, the displacement of emissions has little effect on the global annual ozone burden (0.12% change). Globally, megacity emissions are shown to contribute ~3% of total NOy deposition. The changes in O3, NOx and NOy deposition described here are useful for quantifying megacity impacts and for understanding the sensitivity of megacity regions to local emissions. The small global effects of the 100% redistribution carried out in this study suggest that the distribution of emissions on the local scale is unlikely to have large implications for chemistry–climate processes on the global scale.

Can management improve the lawn’s functioning in the conditions of multiple anthropogenic stressors?

2021 ◽  
Author(s):  
Olga Gavrichkova ◽  
Dario Liberati ◽  
Viktoriya Varyushkina ◽  
Kristina Ivashchenko ◽  
Paolo De Angelis ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Soil Respiration ◽  
Green Infrastructure ◽  
Urban Areas ◽  
Ecosystem Respiration ◽  
Heterotrophic Respiration ◽  
Sand Mixture ◽  
Anthropogenic Stressors ◽  
Unplanted Soil ◽  
The Impact

<p>Release of heavy metals, salts and other toxic agents in the environment is of increasing concern in urban areas. Contaminants not solely decline the quality of the local environment and affect the health of human population and urban ecosystems but are also spread through runoff and leaching into non-contaminated areas. Urban lawns are the most distributed green infrastructure in the cities. Management of lawn system may either exacerbate the negative effects of contaminants on lawn functioning either help to withstand the toxic effects and maintain the lawn ecosystem health and the efficient release of ecosystem services.  </p><p>The aim of this study was to evaluate the interactions between the lawn management, the lawn functioning, and the release into the soil of typical urban contaminants. For this purpose, <em>Festuca arundinacea</em> grass was planted in a turf-sand mixture with and without amendment addition (zeolite + vermicompost). To reproduce the impact of traffic-related contaminants in proximity of the road, pots were treated with a solution containing de-icing salt (NaCl) and 6 heavy metals (Zn, Cd, Pb, Cr, Cu, Ni), imitating road runoff solution. After contamination, half of pots was maintained at optimum soil water content (Smart irrigation), another half was left to periodical drying in order to simulate conditions with discontinuous watering (Periodical irrigation). The same experimental scheme was reproduced for unplanted soil. CO<sub>2</sub> net ecosystem exchange (NEE), soil and ecosystem respiration as well as flux from unplanted soil (heterotrophic respiration) were measured shortly after the treatment (short-term) and up 3 months since the treatment start (long-term).</p><p>Soil amendment stimulated plant productivity and increased the efficiency of the system in C uptake (+56% NEE). A relevant reduction of NEE was observed from 14 to 40 days after the application of traffic-related contaminants in both amended and non amended pots. During this period the contaminants had the greatest impact on lawn NEE subjected to Periodic irrigation (-49% and -66% in amended and non amended pots, respectively), while lawn under Smart irrigation was less affected (-35% and -26% in amended and non amended pots, respectively). Different respiration sources (ecosystem respiration, soil respiration, heterotrophic respiration) were characterized by different sensitivity to management and contamination. Heterotrophic flux was not sensitive to soil amending but declined with contamination with enhanced negative effect under Smart irrigation. Response of ecosystem respiration to contamination was less pronounced in confront to soil respiration suggesting leaf-level buffering.    </p><p>Three months later,  the effect of contaminants on lawn gas exchange ceased for all treated pots. Instead, the irrigation effect persisted depending on whether pots were amended or not. In non amended pots NEE was reduced by 18% under Periodic irrigation, while this effect was not present in amended pots. We conclude, that performance of such green infrastructure as lawns in terms of C sequestration under multiple anthropogenic stressors could be efficiently improved through soil amending and irrigation control.</p><p>Current research was financially supported by RFBR No. 19-29-05187 and RSF No. 19-77-30012.</p>

scholarly journals Edge Growth Form of European Buckthorn Increases Isoprene Emissions From Urban Forests

2021 ◽  
Vol 3 ◽  
Author(s):  
Aarti P. Mistry ◽  
Adam W. T. Steffeck ◽  
Mark J. Potosnak
Keyword(s):  
Invasive Species ◽  
Air Quality ◽  
Species Composition ◽  
Tree Species ◽  
Urban Forests ◽  
Google Earth ◽  
Urban Trees ◽  
Emission Rates ◽  
Isoprene Emission ◽  
Environmental Controls

Urban trees provide numerous benefits, such as cooling from transpiration, carbon sequestration, and street aesthetics. But volatile organic compound emissions from trees can combine with anthropogenic nitrogen oxide emissions to form ozone, a harmful air pollutant. The most commonly-emitted of these compounds, isoprene, negatively impacts air quality and hence is detrimental to human health. In addition to environmental controls such as light and temperature, the quantity of isoprene emitted from a leaf is a genus-specific trait. Leaf isoprene emission is enzymatically controlled, and species are typically classified as emitters or non-emitters (near-zero emission rates). Therefore, the species composition of urban forests affects whole-system isoprene production. The process of plant invasion alters species composition, and invasive tree species can be either emitters or non-emitters. If an invasive, isoprene-emitting tree species displaces native, non-emitting species, then isoprene emission rates from urban forests will increase, with a concomitant deterioration of air quality. We tested a hypothesis that invasive species have higher isoprene emission rates than native species. Using existing tree species inventory data for the Chicago region, leaf-level isoprene emission rates of the six most common invasive and native tree species were measured and compared. The difference was not statistically significant, but this could be due to the variability associated with making a sufficient number of measurements to quantify species isoprene emission rates. The most common invasive species European buckthorn (Rhamnus cathartica, L.) was an emitter. Because European buckthorn often invades the disturbed edges common in urban forests, we tested a second hypothesis that edge-effect isoprene emissions would significantly increase whole-system modeled isoprene emissions. Using Google Earth satellite imagery to estimate forested area and edge length in the LaBagh Woods Forest Preserve of Cook County (Chicago, IL, USA), edge isoprene emission contributed 8.1% compared to conventionally modeled forest emissions. Our results show that the invasion of European buckthorn has increased isoprene emissions from urban forests. This implies that ecological restoration efforts to remove European buckthorn have the additional benefit of improving air quality.

scholarly journals PARAMETERS OF INTEREST FOR THE DESIGN OF GREEN INFRASTRUCTURE

2019 ◽  
pp. 92-101
Author(s):  
Marija Šperac ◽  
Dino Obradović
Keyword(s):  
Air Quality ◽  
Urban Environment ◽  
Air Temperature ◽  
Green Infrastructure ◽  
Land Surface ◽  
Urban Areas ◽  
Hydrological Cycle ◽  
Urban Environments ◽  
Land Surfaces ◽  
Selection Of

The urbanization process significantly reduced the permeability of land surfaces, which affected the changes of runoff characteristics and the relations in the hydrological cycle. In urban environments, the relationships within the hydrological cycle have changed in quantity, in particular: precipitation, air temperature, evaporation, and infiltration. By applying the green infrastructure (GI) to urban environments is beneficial for the water resources and the social community. GI has an effect on the improvement of ecological, economic, and social conditions. Using GI into urban areas increases the permeability of land surfaces, whereby decreasing surface runoff, and thus the frequency of urban floods. It also has a significant influence on the regulation of air quality, water purification, climate change impact, and the changes in the appearance of the urban environment. When planning and designing the GI, it is necessary to identify the type of GI and determine the size and location of the selected GI. Since each urban environment has its own characteristics, it is necessary to analyze them before deciding on the GI. The paper analyzed meteorological parameters (precipitation, air temperature, insolation, air humidity) affecting the selection of GI types, using the specific example of an urban environment – the City of Osijek, Croatia. Significant parameters when designing GI are operation and maintenance These parameters directly affect the efficiency of GI. The proper selection of GI and its location results in maximum gains: the reduction of land surface drainage - drainage of the sewage system, purification and retention of precipitation at the place of production, the improvement of air quality, and the improvement of living conditions in urban environments

scholarly journals Numerical simulation of urban thermal plume merging

2021 ◽  
Author(s):  
Shuojun Mei ◽  
Chao Yuan ◽  
Wenhui He ◽  
Tanya Talwar
Keyword(s):  
Air Quality ◽  
Thermal Comfort ◽  
Urban Areas ◽  
Turbulence Models ◽  
Wave Radiation ◽  
Thermal Plume ◽  
Water Tank ◽  
Surface Cooling ◽  
Thermal Plumes ◽  
The Impact

<p>Densely packed urban buildings trap outgoing long-wave radiation, leading to reduced surface cooling and increased building surface temperature. In calm conditions, poor natural ventilation causes both thermal comfort and air quality issue. The buoyancy flow generated by heated urban surfaces is the main driving of the urban flow and pollutant dispersion. A 3D numerical modelling is conducted to investigate the thermal plumes merging and buoyancy-driven airflow in urban areas. The performances of four different turbulence models, i.e., two URANS (Unsteady Reynolds-averaged Navier–Stokes equations) models and two LES (Large-Eddy Simulation) models are evaluated by comparing the velocity field with previous water tank measurements. Validation results show that all four turbulence models can capture the bending of thermal plumes toward the centre, and LES models provide a better prediction on the vertical velocity profiles, while both URANS models show underestimation. The plume merging mechanism is analysed with the high accuracy LES results. Both pressure difference and swaying motion caused by mean flow and turbulence are important for plume merging. The turbulence coherent structure of plume merging is analysed by a quadrant analysis, which shows ejection and sweep events could significantly change with the building density. A case study with complex urban geometry is conducted to show the impact of thermal plumes merging in the real high-density urban areas. The convergence airflow at the pedestrian level is estimated to 2 m/s under a surface-air temperature difference of 5 °C, which is comparable to wind-driven ventilation and beneficial to thermal comfort and air quality.</p>

Accounting for Noise Pollution in Planning of Smart Cities

2016 ◽  
pp. 149-196 ◽  
Author(s):  
A.W.A. Hammad ◽  
A. Akbarnezhad ◽  
D. Rey
Keyword(s):  
Urban Planning ◽  
Environmental Sustainability ◽  
Urban Areas ◽  
Smart Cities ◽  
Noise Pollution ◽  
Urban Setting ◽  
Pollution Level ◽  
The Social ◽  
Urban Planning And Development ◽  
The Impact

The incorporation of sustainable design measures in urban planning and development has been steadily increasing in the recent years. Achieving a sustainable urban environment requires accounting for the economic, environmental and social impacts of the development involved. An important factor affecting the social and environmental sustainability of urbanised areas which is commonly overlooked in urban planning is the noise pollution level. Despite the proven impacts of noise pollution on the general wellbeing of individuals within an urban setting, there remains a lack of systematic methods to integrate the impact of noise within the design of urban areas. This chapter seeks to raise awareness of the issue of noise pollution in urban settings while proposing novel approaches for its incorporation as a design parameter in planning the layout of smart cities.

scholarly journals Smart City Governance and Children’s Agency: An Assessment of the Green Infrastructure Impact on Children’s Activities in Cagliari (Italy) with the Tool “Opportunities for Children in Urban Spaces (OCUS)”

2019 ◽  
Vol 11 (18) ◽  
pp. 4848 ◽  
Author(s):  
Chiara Garau ◽  
Alfonso Annunziata
Keyword(s):  
Urban Planning ◽  
Green Infrastructure ◽  
Smart City ◽  
Urban Areas ◽  
Resource Depletion ◽  
Urban Spaces ◽  
Urban Green Spaces ◽  
Synthetic Index ◽  
Macro Scale ◽  
Scale Properties

The increases in urbanization, pollution, resource depletion, and climate change underline the need for urban planning policies that incorporate blue–green infrastructure (BGI) and ecosystem services. This paper proposes a framework for assessing BGI’s effect on children’s outdoor activities. This effect, called meaningful usefulness, is a central issue due to the influence of experiences with nature on children’s development and the global trend of concentration of children in urban areas. Based on the concept of affordance, the methodology formalizes meaningful usefulness in terms of an index of usefulness of individual settings (IUIS) and a synthetic index of usefulness of BGI in a specific area (ISGI). These are determined via an audit protocol, Opportunities for Children in Urban Spaces (OCUS), which incorporates a set of indicators measuring micro-scale properties of individual places and contextual macro-scale factors. The methodology is applied to BGI components in Cagliari, Sardinia, Italy, which was selected for its superior density of urban green spaces. The application of the OCUS tool confirms its usefulness for investigating functional affordances incorporated into the trans-scalar structures of BGIs. The analytic protocol further contributes to the implementation of urban planning strategies within the smart city paradigm.

scholarly journals Emission of fine particles (PM2.5) from residential biomass combustion in Croatia and how to reduce it

2020 ◽  
Vol 7 (2) ◽  
pp. 84-94
Author(s):  
Mirela Poljanac
Keyword(s):  
Air Quality ◽  
Human Health ◽  
Urban Areas ◽  
Fine Particles ◽  
Biomass Combustion ◽  
Rural And Urban Areas ◽  
Wood Burning ◽  
Rural And Urban ◽  
The Impact ◽  
Pm2.5 Emissions

Wood burning in residential appliances is very represented in the Republic of Croatia. It is a main or an additional form of heating for many households in rural and urban areas and is therefore an important source of air pollution. The choice of energy and the combustion appliance used in home have a significant impact on PM2.5 emissions. The paper informs the reader about PM2.5 emissions, their main sources and impacts on human health, environment, climate, air quality, and the reason why PM2.5 emissions from residential wood burning are harmful. Paper also gives an overview of spatial PM2.5 emission distribution in Croatia, their five air quality zones and four agglomerations. The paper analyses the sources and their contribution to PM2.5 emissions with the relevance of PM2.5 emissions from residential plants, the use of fuels in residential plants and their contribution to PM2.5 emissions and PM2.5 emissions by fuel combustion technologies in residential sector. Appropriate strategies, policies, and actions to reduce the impact of residential biomass (wood) burning on the environment, air quality and human health are considered.

scholarly journals Link between Land Use and Flood Risk Assessment in Urban Areas

Proceedings ◽  
2020 ◽  
Vol 30 (1) ◽  
pp. 62
Author(s):  
Zahra Kalantari ◽  
Johanna Sörensen
Keyword(s):  
Land Use ◽  
Land Use Change ◽  
Green Infrastructure ◽  
Flood Risk ◽  
Urban Areas ◽  
Land Use Changes ◽  
Drainage System ◽  
Property Owners ◽  
Pluvial Flooding ◽  
The Impact

The densification of urban areas has raised concerns over increased pluvial flooding. Flood risk in urban areas might increase under the impact of land use changes. Urbanisation involves the conversion of natural areas to impermeable areas, causing lower infiltration rates and increased runoff. When high-intensity rainfall exceeds the capacity of an urban drainage system, the runoff causes pluvial flooding in low-laying areas. In the present study, a long time series (i.e., 20 years) of geo-referenced flood claims from property owners has been collected and analysed in detail to assess flood risk as it relates to land use changes in urban areas. The flood claim data come from property owners with flood insurance that covers property loss from overland flooding, groundwater intrusion through basement walls, as well as flooding from drainage systems; these data serve as a proxy of flood severity. The spatial relationships between land use change and flood occurrences in different urban areas were analysed. Special emphasis was placed on examining how nature-based solutions and blue-green infrastructure relate to flood risk. The relationships are defined by a statistical method explaining the tendencies whereby land use change affects flood risk.

Sign in / Sign up

Export Citation Format

Share Document