scholarly journals Mechanical Response and Fracture Behavior of Brittle Rocks Containing Two Inverted U-Shaped Holes under Uniaxial Loading

2019 ◽  
Vol 9 (24) ◽  
pp. 5327
Author(s):  
Hao Wu ◽  
Guoyan Zhao ◽  
Weizhang Liang
Keyword(s):  
Fracture Behavior ◽  
Shear Failure ◽  
Mechanical Response ◽  
Numerical Study ◽  
Shear Crack ◽  
Image Correlation ◽  
Tensile Crack ◽  
Shear Cracks ◽  
Brittle Rocks ◽  
Hole Defects

Hole defects embedded in rocks have a crucial influence on their stability and failure mechanism. The purpose of this research is to explore the mechanical response and fracture behavior around inverted U-shaped openings in rocks under compressive stress. To begin with, a multitude of uniaxial compression experiments on prismatic sandstone samples with one single or two inverted U-shaped openings with different configurations were carried out. In the experiments, the advanced DIC (digital image correlation) and AE (acoustic emission) apparatus was combinedly utilized to monitor the crack growth and determine the threshold stresses involved in fracture behavior. After that, the stress distributions around the openings under unidirectional stress were simulated by a numerical study. Test results suggest that the presence of openings strongly degrades the strength and deformation parameters, and the reduction degree depends on the number and configuration of openings. During the fracture process, five sorts of cracks, namely the elementary tensile crack, posterior tensile crack, slabbing crack, shear crack and spalling crack, are formed around the openings. For the samples containing two openings, three categories of hole coalescence appear: slabbing coalescence, shear coalescence and tensile coalescence. The failure mode of the samples containing one single or two diagonal openings is dominated by shear cracks, while that of the other samples is tensile-shear failure. Stress analysis shows that the concentrated stresses at the peripheries of the openings can better explain the fracture behavior.

scholarly journals Experimental Investigation on Fracture Evolution in Sandstone Containing an Intersecting Hole under Compression Using DIC Technique

2019 ◽  
Vol 2019 ◽  
pp. 1-12 ◽  
Author(s):  
Hao Wu ◽  
Guoyan Zhao ◽  
Weizhang Liang ◽  
Enjie Wang ◽  
Shaowei Ma
Keyword(s):  
Fracture Behavior ◽  
Horizontal Displacement ◽  
Image Correlation ◽  
Propagation Mechanism ◽  
Shear Cracks ◽  
Compression Tests ◽  
Displacement Fields ◽  
Red Sandstone ◽  
Tensile Cracks ◽  
Dic Technique

Failure of underground structures, especially intersections, becomes more severe as the depth increases, which poses a new challenge for the safe construction and operation of deep rock engineering. To investigate the mechanical properties and fracture behavior of rock with an intersecting hole under compressive loads, a series of uniaxial compression tests was carried out on cuboid red sandstone specimens containing an intersecting hole with three types of shapes by digital image correlation (DIC) technique. The results showed that the existing hole inside specimens leads to almost a 50% reduction of mechanical parameters from that of intact ones, and this weakening effect is associated with the shapes of holes. Failure of specimens is a progressive process in which cracks, i.e., primary tensile cracks, secondary tensile cracks, and shear cracks, initiate from stress concentration zones, propagate along certain direction, and coalesce with each other into macrofractures. Both the real-time principal strain fields and horizontal displacement fields of specimens under compression could be visually displayed by DIC system, and they were in good consistency in characterizing the fracture behavior. Moreover, the propagation characteristics of primary tensile cracks were studied further by quantitatively analyzing the strain variation during the loading process, and the propagation mechanism of “open-close-reopen” of primary tensile cracks was explained in detail.

scholarly journals Experimental Investigation of the Shear Behavior of a Concrete Beam without Web Reinforcements Using External Vertical Prestressing Rebars

2019 ◽  
Vol 2019 ◽  
pp. 1-13
Author(s):  
Xingwei Xue ◽  
Xuan Wang ◽  
Xudong Hua ◽  
Meizhong Wu ◽  
Longqing Wu ◽  
...  
Keyword(s):  
Compressive Stress ◽  
Shear Failure ◽  
Concrete Beams ◽  
Shear Crack ◽  
Shear Resistance ◽  
Shear Behavior ◽  
Shear Capacity ◽  
Shear Cracks ◽  
Web Reinforcement ◽  
Shear Performance

The shear performance of concrete beams is known to be an important mechanical feature; hence, enhanced shear resistance is critical for determining a beam’s performance in terms of security and service life. This paper presents a study on the shear behavior of concrete beams without web reinforcement strengthened by external vertical prestressing rebars (EVPRs). Experimental data were obtained from seven test beams with varying influencing factors (stirrup ratio ρsEP, arrangement spacing s, prestressing force Fp, and compressive stress degree γp of the EVPRs) to determine their effects on the shear behavior. The results reveal that the EVPRs can significantly improve the shear capacity and ductility of concrete beams without web reinforcement. Furthermore, the failure mode is changed from brittle diagonal tension to relatively ductile shear compression, and the flexural cracks and shear cracks are more fully developed. The shear capacity becomes enhanced as the ρsEP and γp are increased; vertical compressive stress provided by the EVPRs can reduce the principal tensile stress of the concrete structure to prevent the shear cracking and enhance the shear resistance of the concrete. Meanwhile, in the stage from the formation of the critical shear crack (CSC) to the shear failure, the EVPRs can be used as stirrups to share the shear load. It can be concluded that EVPRs can effectively improve the shear performance of concrete beams.

scholarly journals Experimental Investigation on Crack Behavior and Stress Thresholds of Sandstone Containing a Square Inclusion under Uniaxial Compression

2020 ◽  
Vol 10 (21) ◽  
pp. 7621
Author(s):  
Quanqi Zhu ◽  
Diyuan Li
Keyword(s):  
Uniaxial Compression ◽  
Shear Failure ◽  
Shear Crack ◽  
Image Correlation ◽  
Interface Debonding ◽  
Compression Tests ◽  
Strain Behavior ◽  
Damage And Fracture ◽  
Crack Behavior ◽  
Strength And Stiffness

To study the effect of strength, stiffness and inclination angle of square inclusions on failure characteristics of rock, uniaxial compression tests were carried out on prismatic sandstone containing a square hole with different filling modes and hole angles using a servo-hydraulic loading system. Digital image correlation and acoustic emission techniques were jointly applied to analyze the damage and fracture process, and the crack stress thresholds were determined qualitatively and quantitatively by combining the stress–strain behavior. The results show that the mechanical properties and crack stress thresholds of pre-holed specimens increase with the increase of the strength and stiffness of inclusions, and are affected by the hole angle. Rock failure is mainly caused by secondary crack propagation and shear crack coalescence, eventually forming mixed tensile-shear failure. The crack behavior, especially the crack initiation position, is affected by the filling mode and the hole angle. Interface debonding tends to initiate at the vertical interface, while interface slipping tends to propagate along the inclined interface. Under identical loading conditions, the specimen with 45° hole is more susceptible to crack and damage than that with 0° hole. Notably, inclusions can inhibit the hole deformation and the fracture of rock matrix, especially the sidewall spalling of 0° hole.

Experimental Research on Shear Performance of Coal Containing Gas under Different Gas Pressure

2012 ◽  
Vol 170-173 ◽  
pp. 209-213
Author(s):  
Yong Ming Ding ◽  
Shou Jian Peng ◽  
Hui Guo
Keyword(s):  
Fracture Surface ◽  
Shear Failure ◽  
Shear Fracture ◽  
Shear Crack ◽  
Shear Plane ◽  
Gas Pressure ◽  
Tensile Crack ◽  
Propagation Process ◽  
Crack Propagation Process ◽  
Shear Performance

Coal containing gas is porous material. In this paper, by using the self-developed meso shear test equipment for coal or rock containing gas, shear crack propagation process of coal under different gas pressure conditions was studied, and shear performance of coal containing gas under different gas pressure was also researched. The results show that the gas pressure can hasten the crack growth rate of shear fracture surface, reduce the shear strength of coal containing gas, and accelerate its shear failure fracture process. The shear breaking process of coal results in two cracks: shear crack and tensile crack, and the cracks first appeared in the shear plane at both ends, then extension to the central until shear fracture surface formed.

scholarly journals Influence of Patching on the Shear Failure of Reinforced Concrete Beam without Stirrup

2021 ◽  
Vol 6 (7) ◽  
pp. 97
Author(s):  
Stefanus Adi Kristiawan ◽  
Halwan Alfisa Saifullah ◽  
Agus Supriyadi
Keyword(s):  
Reinforced Concrete ◽  
Shear Failure ◽  
Numerical Study ◽  
Unsaturated Polyester ◽  
Reinforced Concrete Beam ◽  
Concrete Cover ◽  
Shear Capacity ◽  
Rc Beam ◽  
Shear Span ◽  
Shear Cracking

Deteriorated concrete cover, e.g., spalling or delamination, especially when it occurs at the web of a reinforced concrete (RC) beam within the shear span, can reduce the shear capacity of the beam. Patching of this deteriorated area may be the best option to recover the shear capacity of the beam affected. For this purpose, unsaturated polyester resin mortar (UPR mortar) has been formulated. This research aims to investigate the efficacy of UPR mortar in limiting the shear cracking and so restoring the shear capacity of the deteriorated RC beam. The investigation is carried out by an experimental and numerical study. Two types of beams with a size of 150 × 250 × 1000 mm were prepared. The first type of beams was assigned as a normal beam. The other was a beam with a cut off in the non-stirrup shear span, which was eventually patched with UPR mortar. Two reinforcement ratios were assigned for each type of beams. The results show that UPR mortar is effective to hamper the propagation of diagonal cracks leading to increase the shear failure load by 15–20% compared to the reference (normal) beam. The increase of shear strength with the use of UPR mortar is consistently confirmed at various reinforcement ratios.

scholarly journals Evolution of Meniscal Biomechanical Properties with Growth: An Experimental and Numerical Study

2021 ◽  
Vol 8 (5) ◽  
pp. 70
Author(s):  
Marco Ferroni ◽  
Beatrice Belgio ◽  
Giuseppe M. Peretti ◽  
Alessia Di Giancamillo ◽  
Federica Boschetti
Keyword(s):  
Mechanical Properties ◽  
Stress Relaxation ◽  
Developmental Stage ◽  
Mechanical Response ◽  
Numerical Study ◽  
Numerical Models ◽  
Mechanical Stimulus ◽  
Specific Response ◽  
Mechanical Parameters ◽  
Biochemical Analyses

The menisci of the knee are complex fibro-cartilaginous tissues that play important roles in load bearing, shock absorption, joint lubrication, and stabilization. The objective of this study was to evaluate the interaction between the different meniscal tissue components (i.e., the solid matrix constituents and the fluid phase) and the mechanical response according to the developmental stage of the tissue. Menisci derived from partially and fully developed pigs were analyzed. We carried out biochemical analyses to quantify glycosaminoglycan (GAG) and DNA content according to the developmental stage. These values were related to tissue mechanical properties that were measured in vitro by performing compression and tension tests on meniscal specimens. Both compression and tension protocols consisted of multi-ramp stress–relaxation tests comprised of increasing strains followed by stress–relaxation to equilibrium. To better understand the mechanical response to different directions of mechanical stimulus and to relate it to the tissue structural composition and development, we performed numerical simulations that implemented different constitutive models (poro-elasticity, viscoelasticity, transversal isotropy, or combinations of the above) using the commercial software COMSOL Multiphysics. The numerical models also allowed us to determine several mechanical parameters that cannot be directly measured by experimental tests. The results of our investigation showed that the meniscus is a non-linear, anisotropic, non-homogeneous material: mechanical parameters increase with strain, depend on the direction of load, and vary among regions (anterior, central, and posterior). Preliminary numerical results showed the predominant role of the different tissue components depending on the mechanical stimulus. The outcomes of biochemical analyses related to mechanical properties confirmed the findings of the numerical models, suggesting a specific response of meniscal cells to the regional mechanical stimuli in the knee joint. During maturation, the increase in compressive moduli could be explained by cell differentiation from fibroblasts to metabolically active chondrocytes, as indicated by the found increase in GAG/DNA ratio. The changes of tensile mechanical response during development could be related to collagen II accumulation during growth. This study provides new information on the changes of tissue structural components during maturation and the relationship between tissue composition and mechanical response.

Numerical modelling of the crack-pore interaction and damage evolution behaviour of rocklike materials with pre-existing cracks and pores

2020 ◽  
pp. 105678952098387
Author(s):  
PLP Wasantha ◽  
D Bing ◽  
SQ Yang ◽  
T Xu
Keyword(s):  
Principal Stress ◽  
Damage Evolution ◽  
Shear Failure ◽  
Mechanical Response ◽  
Distribution Patterns ◽  
Stress Distributions ◽  
Compressive Stresses ◽  
Major Principal Stress ◽  
The Right ◽  
Macroscopic Failure

The combined effect of pre-existing cracks and pores on the damage evolution behaviour and mechanical properties of rocklike materials under uniaxial compression was numerically studied. Simulations of cracks and pores alone showed that increasing crack length and pore diameter decrease uniaxial compressive strength (UCS) and elastic modulus. Subsequent simulations considered two types of combinations of pre-existing cracks and pores – two cracks either side of a centric pore, and two pores either side of a centric crack – and the distance between cracks and pores was changed. In the case of two cracks at either side of the pore, UCS increased only slightly when the distance between the cracks and pore was increased. This was attributed to the more profound effect of the presence of the pore on UCS, and was confirmed by the progressive crack development characteristics and the major principal stress distribution patterns, which showed that the cracks initiated from the tips of the two pre-existing cracks made little or no contribution to the ultimate macroscopic failure. In contrast, models with two pores at either side of a centric crack showed a marked dependency of UCS on the distance between the pores and the crack. Cracks propagating from pre-existing pores made a greater contribution to the ultimate macroscopic failure when the pores were close to the centric crack and the effect gradually diminished with increasing space between pre-existing pores and the centric crack. Major principal stress distributions showed an asymmetric mobilisation of compressive stresses at the right and left sides of the two pores, favouring macroscopic shear failure when they were close to the centric crack which had led to a lower UCS. Overall, this study presents some critical insights into crack-pore interaction behaviour and the resulting mechanical response of rocklike materials to assist with the design of rock structures.

Numerical Investigation of Ductile Fracture in Pipelines Under Complex Loading Using a Phenomenological Damage Model

2021 ◽  
Author(s):  
Iago S. Santos ◽  
Diego F. B. Sarzosa
Keyword(s):  
Ductile Fracture ◽  
Mechanical Response ◽  
Numerical Study ◽  
Damage Model ◽  
Stress Triaxiality ◽  
Numerical Procedure ◽  
Complex Loading ◽  
Experimental Tests ◽  
Compact Tension ◽  
Axial Tensile

Abstract This paper presents a numerical study on pipes ductile fracture mechanical response using a phenomenological computational damage model. The damage is controlled by an initiation criterion dependent on the stress triaxiality and the Lode angle parameter, and a post-initiation damage law to eliminate each finite element from the mesh. Experimental tests were carried out to calibrate the elastoplastic response, damage parameters and validate the FEM models. The tested geometries were round bars having smooth and notched cross-section, flat notched specimens under axial tensile loads, and fracture toughness tests in deeply cracked bending specimens SE(B) and compact tension samples C(T). The calibrated numerical procedure was applied to execute a parametric study in pipes with circumferential surface cracks subjected to tensile and internal pressure loads simultaneously. The effects of the variation of geometric parameters and the load applications on the pipes strain capacity were investigated. The influence of longitudinal misalignment between adjacent pipes was also investigated.

Experimental Characterization and Finite Element Modeling of Film Capacitors for Automotive Applications

2016 ◽  
Author(s):  
D. Croccolo ◽  
T. M. Brugo ◽  
M. De Agostinis ◽  
S. Fini ◽  
G. Olmi
Keyword(s):  
Finite Element ◽  
Mechanical Response ◽  
High Reliability ◽  
Three Dimensional ◽  
Strain Analysis ◽  
Life Time ◽  
Element Model ◽  
Image Correlation ◽  
Thermal Loads ◽  
Mechanical Shock

As electronics keeps on its trend towards miniaturization, increased functionality and connectivity, the need for improved reliability capacitors is growing rapidly in several industrial compartments, such as automotive, medical, aerospace and military. Particularly, recent developments of the automotive compartment, mostly due to changes in standards and regulations, are challenging the capabilities of capacitors in general, and especially film capacitors. Among the required features for a modern capacitor are the following: (i) high reliability under mechanical shock, (ii) wide working temperature range, (iii) high insulation resistance, (iv) small dimensions, (v) long expected life time and (vi) high peak withstanding voltage. This work aims at analyzing the key features that characterize the mechanical response of the capacitor towards temperature changes. Firstly, all the key components of the capacitor have been characterized, in terms of strength and stiffness, as a function of temperature. These objectives have been accomplished by means of several strain analysis methods, such as strain gauges, digital image correlation (DIC) or dynamic mechanical analysis (DMA). All the materials used to manufacture the capacitor, have been characterized, at least, with respect to their Young’s modulus and Poisson’s ratio. Then, a three-dimensional finite element model of the whole capacitor has been set up using the ANSYS code. Based on all the previously collected rehological data, the numerical model allowed to simulate the response in terms of stress and strain of each of the capacitor components when a steady state thermal load is applied. Due to noticeable differences between the thermal expansion coefficients of the capacitor components, stresses and strains build up, especially at the interface between different components, when thermal loads are applied to the assembly. Therefore, the final aim of these numerical analyses is to allow the design engineer to define structural optimization strategies, aimed at reducing the mechanical stresses on the capacitor components when thermal loads are applied.

Numerical Investigation of a Stiffened Panel Subjected to Low Velocity Impacts

2015 ◽  
Vol 665 ◽  
pp. 277-280 ◽  
Author(s):  
Aniello Riccio ◽  
S. Saputo ◽  
A. Sellitto ◽  
A. Raimondo ◽  
R. Ricchiuto
Keyword(s):  
Numerical Investigation ◽  
Composite Laminates ◽  
Mechanical Response ◽  
Numerical Study ◽  
Fem Analysis ◽  
Matrix Cracking ◽  
Stiffened Panel ◽  
Low Velocity ◽  
Formation And Evolution ◽  
The Impact

The investigation of fiber-reinforced composite laminates mechanical response under impact loads can be very difficult due to simultaneous failure phenomena. Indeed, as a consequence of low velocity impacts, intra-laminar damage as fiber and matrix cracking and inter-laminar damage, such as delamination, often take place concurrently, leading to significant reductions in terms of strength and stability for composite structure. In this paper a numerical study is proposed which, by means of non-linear explicit FEM analysis, aims to completely characterize the composite reinforced laminates damage under low velocity impacts. The numerical investigation allowed to obtain an exhaustive insight on the different phases of the impact event considering the damage formation and evolution. Five different impact locations with the same impact energy are taken into account to investigate the influence on the onset and growth of damage.

Sign in / Sign up

Export Citation Format

Share Document