scholarly journals Experimental Study on the Seismic Performance of Recycled Concrete Hollow Block Masonry Walls

2019 ◽  
Vol 9 (20) ◽  
pp. 4336 ◽  
Author(s):  
Chao Liu ◽  
Xiangyun Nong ◽  
Fengjian Zhang ◽  
Zonggang Quan ◽  
Guoliang Bai
Keyword(s):  
Energy Dissipation ◽  
Bearing Capacity ◽  
Seismic Performance ◽  
Recycled Concrete ◽  
Masonry Walls ◽  
Test Results ◽  
Ordinary Concrete ◽  
Lateral Drift ◽  
Aspect Ratios ◽  
Hollow Block

This paper aims to manufacture recycled concrete hollow block (RCHB) which can be used for the masonry structure with seismic requirements. Five RCHB masonry walls were tested under cyclic loading to evaluate the effect of the axial compression stress, aspect ratio, and the materials of structural columns on the seismic performance. Based on the test results, the failure pattern, hysteresis curves, lateral drift, ductility, stiffness degradation, and the energy dissipation of the specimens were analyzed in detail. The results showed that with the increase of aspect ratios, the ductility of RCHB masonry walls increased, but the horizontal bearing capacity and energy dissipation of RCHB masonry walls decreased. With the increase of compressive stress, the bearing capacity and energy dissipation performance of RCHB masonry walls were improved, and the stiffness degraded slowly. The results also demonstrated that the RCHB masonry walls with structural columns, depending on whether the structural columns were prepared by ordinary concrete or recycled concrete, could increase the bearing capacity, ductility, and energy dissipation of specimens. The research confirmed that RCHB masonry walls could meet the seismic requirements through thoughtful design. Therefore, this study provided a new cleaner production for the utilization of construction waste resources.

scholarly journals Seismic Performance of Masonry Walls Built with New Type of Fired Shale Hollow Blocks

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Jian Wu ◽  
Liangcheng Zeng ◽  
Bo Wang
Keyword(s):  
Energy Dissipation ◽  
Aspect Ratio ◽  
Bearing Capacity ◽  
Compressive Stress ◽  
Seismic Performance ◽  
Stiffness Degradation ◽  
Masonry Walls ◽  
Secant Stiffness ◽  
Hollow Block ◽  
New Type

This paper presents the cyclic loading test results of a new type of fired shale hollow block masonry walls. Six specimens were designed including two specimens without reinforcements (bare walls) and four specimens constrained by structural columns (reinforced walls). The influences of aspect ratio, vertical compressive stress, and structural column on the seismic performance of the specimens were investigated. The failure mode, bearing capacity, ductility, stiffness degradation, and energy dissipation of specimens were analyzed. The results showed that the crack patterns of specimens changed from the horizontal straight shape (bare walls) to “X” shape (reinforced walls), and the corresponding bearing capacity, ductility, stiffness degradation, and energy dissipation of the specimens were improved. With the increase of the vertical compressive stress, the ductility and the secant stiffness of the specimens increased. Moreover, with the decrease of aspect ratio, the bearing capacity and secant stiffness of the masonry walls increased, while the energy dissipation capacity decreased. This paper confirms that fired shale hollow block walls could meet the seismic requirements through appropriate design, which could promote the application of this new type of block in civil engineering.

scholarly journals On the Seismic Performance of Autoclaved Aerated Concrete Self-Insulation Block Walls

Materials ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 2942
Author(s):  
Yun Liu ◽  
Gonglian Chen ◽  
Zhipeng Wang ◽  
Zhen Chen ◽  
Yujia Gao ◽  
...  
Keyword(s):  
Energy Dissipation ◽  
Bearing Capacity ◽  
Seismic Performance ◽  
Shear Capacity ◽  
Seismic Load ◽  
Masonry Walls ◽  
Autoclaved Aerated Concrete ◽  
Aerated Concrete ◽  
Energy Dissipation Capacity ◽  
Insulation Block

Autoclaved aerated concrete (AAC) self-insulation block masonry is often used for the infill walls in steel and concrete frame structures. To work together with the frame under earthquake action, it is essential to understand the seismic behavior of AAC self-insulation block masonry walls. In this paper, six AAC self-insulation block masonry walls were experimentally studied under the pseudo static test. The load-displacement hysteretic curves were drawn with the test data. The failure characteristics, loading capacity, stiffness degeneration, energy dissipation capacity and hysteretic behavior are analyzed. The results indicate that the blocks underwent internal failure due to the lower strength with a larger size, but the walls had good energy dissipation capacity with a rational bearing capacity. Accompanied by the influence of vertical compressive stress on the top surface of the walls, the cracking resistance, ultimate bearing capacity, deformability and energy dissipation capacity of the walls were affected by the masonry mortar joints. Comparatively, the walls with thin-layer mortar joints had better seismic performance than those with insulation mortar joints or with vertical joints filled by mineral wool plates. Finally, the shear capacity of the walls under seismic load is evaluated referring to the formulas of current design codes for masonry walls.

Experimental Study on Seismic Performance of Steel Reinforced Recycled Concrete Column

2014 ◽  
Vol 501-504 ◽  
pp. 1580-1586
Author(s):  
Jian Yang Xue ◽  
Jian Peng Lin ◽  
Hui Ma
Keyword(s):  
Energy Dissipation ◽  
Bearing Capacity ◽  
Axial Compression ◽  
Seismic Performance ◽  
Compression Ratio ◽  
Recycled Concrete ◽  
Recycled Aggregate ◽  
Concrete Column ◽  
Axial Compression Ratio ◽  
Energy Dissipation Capacity

The pseudo-static tests were carried out on seven steel reinforced recycled concrete columns. The main parameters of specimens were recycled aggregate replacement ratio, axial compression ratio and volumetric stirrup ratio. The results indicate that the incorporation of recycled aggregate doesnt reduce the horizontal bearing capacity, ductility and the energy dissipation capacity of specimens and has little effect on seismic performance. The seismic performance of steel reinforced recycled concrete column decreases significantly in the high axial compression ratio. The ductility, horizontal bearing capacity and the energy dissipation capacity of the steel reinforced recycled concrete column increase with a rise in the volumetric stirrup ratio. This study provides a reference on the application of the steel reinforced recycled concrete column.

Experimental Study on Seismic Behavior of Recycled Concrete Perforated Brick Masonry

2010 ◽  
Vol 163-167 ◽  
pp. 1879-1882 ◽  
Author(s):  
Zhang Gen Guo ◽  
Wei Min Sun ◽  
Jian Wang ◽  
Jian Long Chen ◽  
Yi Fan Xu
Keyword(s):  
Energy Dissipation ◽  
Seismic Performance ◽  
Seismic Behavior ◽  
Low Frequency ◽  
Hysteresis Loops ◽  
Brick Masonry ◽  
Recycled Concrete ◽  
Load Test ◽  
Test Results ◽  
Backbone Curve

In order to investigate the seismic performance of recycled concrete perforated brick masonry, an experiment was conducted on three specimens of recycled concrete perforated brick walls subjected to low frequency reversed cyclic load test. The loading process, failure mechanism, ultimate bearing capacity was studied. The seismic behavior such as hysteretic characteristics, backbone curve, ductility, energy dissipation capacity were analyzed too. The test results show that the seismic performance of recycled concrete perforated brick masonry is similar to those of ordinary concrete perforated brick walls. The test results also indicate that the seismic behavior of recycled concrete perforated brick masonry is good. The specimens have good hysteresis loops and ductility, strong energy dissipation capacities.

scholarly journals Seismic Performance Test of Double-Row Reinforced Ceramsite Concrete Composite Wall Panels with Cores

2021 ◽  
Vol 11 (6) ◽  
pp. 2688
Author(s):  
Shaochun Ma ◽  
Lianghui Li ◽  
Peng Bao
Keyword(s):  
Energy Dissipation ◽  
Bearing Capacity ◽  
Seismic Performance ◽  
Wall Panel ◽  
Double Row ◽  
Ordinary Concrete ◽  
Wall Panels ◽  
Sandwich Wall ◽  
Energy Dissipation Capacity ◽  
Sandwich Wall Panel

The research objective of this study was the seismic performance of double-row reinforced ceramsite concrete sandwich wall panels. The feasibility of upgrading a new wall panel from a non-load-bearing partition wall to a load-bearing seismic wall was examined by conducting cyclic load tests on five wall panel specimens. The test piece was a sandwich thermal insulation structure that could achieve a good protection distance between the thermal insulation material and the fire source so that the fire prevention problem could be solved. At the same time, the problem of easy fall-off of the insulation system was also solved. The specimens were divided into three groups, including three double-row reinforced ceramsite concrete sandwich wall panels with different dosages of alkali-resistant glass fiber, a double-row reinforced ordinary concrete sandwich wall panel, and a solid concrete ceramic wallboard. The effects of different dosages of alkali-resistant glass fiber, construction forms, and bearing side plate materials on the seismic performance of the sandwich wall panels were investigated separately for the specimens. From the analysis of the specimen results (damage characteristics, hysteresis curves, energy dissipation capacity, bearing capacity, ductility, longitudinal reinforcement strain, and stiffness degradation), it could be seen that among the five types of wallboard, the double-row reinforced ceramsite concrete sandwich wall panel with 0.3% fiber content had the best ductility and energy dissipation capacity. Adding fiber could solve or improve the problem of the low ultimate bearing capacity of ceramsite concrete as the wallboard’s bearing material. Compared with the same size solid ordinary concrete wallboard, the bearing capacity of the double-row reinforced ceramic concrete sandwich panel was slightly reduced. However, the additional seismic performance indexes were relatively superior. Through the analysis of the test results, it was shown that, when considering the thermal performance and seismic capacity, the new wall panel had good prospects for engineering applications.

Study on the Basic Mechanical Properties of Recycled Concrete Hollow Block Masonry

2013 ◽  
Vol 438-439 ◽  
pp. 749-755 ◽  
Author(s):  
Tong Hao ◽  
Dong Li
Keyword(s):  
Mechanical Properties ◽  
Shear Strength ◽  
Shear Behavior ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Test Results ◽  
Aggregate Concrete ◽  
Mortar Strength ◽  
Hollow Block

By the experimental studying on the basic mechanical properties of recycled concrete hollow block masonry, the compressive and shear behavior of recycled aggregate concrete hollow block masonry under different mortar strength were analyzed. Research indicated that the compressive and shear behavior of recycled aggregate concrete hollow block masonry was similar to that of ordinary concrete hollow block masonry. The normal formula was recommended to calculate the compressive strength of the masonry. The shear strength of the masonry was affected by the mortar strength. The shear strength calculation formula of recycled concrete hollow block masonry was proposed according to the formula of masonry design code. The calculating results were in good agreement with the test results.

Estimation of Seismic Energy Dissipation for Steel Slit Shear Walls Considering Out-of-Plane Buckling

2021 ◽  
Author(s):  
Yiming Ma ◽  
Liusheng He ◽  
Ming Li
Keyword(s):  
Energy Dissipation ◽  
Shear Walls ◽  
Seismic Energy ◽  
Thickness Ratio ◽  
Design Parameters ◽  
Test Results ◽  
Loading Test ◽  
Aspect Ratios ◽  
Out Of Plane ◽  
Energy Dissipation Capacity

Steel slit shear walls (SSSWs), made by cutting slits in steel plates, are increasingly adopted in seismic design of buildings for energy dissipation. This paper estimates the seismic energy dissipation capacity of SSSWs considering out-of-plane buckling. In the experimental study, three SSSW specimens were designed with different width-thickness ratios and aspect ratios and tested under quasi-static cyclic loading. Test results showed that the width-thickness ratio of the links dominated the occurrence of out-of-plane buckling, which produced pinching in the hysteresis and thus reduced the energy dissipation capacity. Out-of-plane buckling occurred earlier for the links with a larger width-thickness ratio, and vice versa. Refined finite element model was built for the SSSW specimens, and validated by the test results. The concept of average pinching parameter was proposed to quantify the degree of pinching in the hysteresis. Through the parametric analysis, an equation was derived to estimate the average pinching parameter of the SSSWs with different design parameters. A new method for estimating the energy dissipation of the SSSWs considering out-of-plane buckling was proposed, by which the predicted energy dissipation agreed well with the test results.

Experimental Study on Seismic Performance of the Reinforced Concrete Grid-Mesh Frame Wall

2013 ◽  
Vol 680 ◽  
pp. 234-238
Author(s):  
Jin Li Qiao ◽  
Wen Ling Tian ◽  
Ming Jie Zhou ◽  
Fang Lu Jiang ◽  
Kun Zhao
Keyword(s):  
Experimental Study ◽  
Reinforced Concrete ◽  
Energy Dissipation ◽  
Bearing Capacity ◽  
Seismic Performance ◽  
Seismic Energy ◽  
Width Ratio ◽  
Filling Material ◽  
Energy Dissipation Capacity ◽  
Grid Mesh

In order to validate the seismic performance of reinforced concrete grid-mesh frame wall , four grid frame walls in half size is made with different height-width ratios and different grid forms in the paper. Two of them are filling with cast-in-place plaster as filling material. According to the experimental results of these four walls subjected to horizontal reciprocating loads, we know that the grid-mesh frame wall's breaking form are in stages and multiple modes, and the main influencing factors are height-width ratio and grid form, what's more, with cast-in-place plaster as fill material, could not only improve the level of the wall bearing capacity and stiffness, but also improve the ductility and seismic energy dissipation capacity.

Seismic Rehabilitation of Beam-Column Joints Using FRP Sheets and Buckling Restrained Braces

2013 ◽  
Vol 479-480 ◽  
pp. 1170-1174
Author(s):  
Hee Cheul Kim ◽  
Dae Jin Kim ◽  
Min Sook Kim ◽  
Young Hak Lee
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
Energy Dissipation ◽  
Seismic Performance ◽  
Reinforced Concrete Structures ◽  
Test Results ◽  
Seismic Rehabilitation ◽  
Buckling Restrained Braces ◽  
Column Joint ◽  
Energy Dissipation Capacity

The purpose of this study was to evaluate seismic performance of rehabilitated beam-column joint using FRP sheets and Buckling Restrained Braces (BRBs) and provide test data related to rehabilitated beam-column joints in reinforced concrete structures. The seismic performance of total six beam-column specimens is evaluated under cyclic loadings in terms of shear strength, effective stiffness, energy dissipation and ductility. The test results showed wrapping FRP sheets can contribute to increase the effect of confinement and the crack delay. Also retrofitting buckling restrained braces (BRBs) can improve the stiffness and energy dissipation capacity. Both FRP sheets and BRBs can effectively improve the strength, stiffness and ductility of seismically deficient beam-column joints.

Experimental Investigations on the Seismic Behavior of Precast Concrete Columns with Novel Box Connections

2019 ◽  
Vol 14 (02) ◽  
pp. 2050007
Author(s):  
Xizhi Zhang ◽  
Shengbo Xu ◽  
Shaohua Zhang ◽  
Gaodong Xu
Keyword(s):  
Energy Dissipation ◽  
Bearing Capacity ◽  
Failure Mode ◽  
Seismic Behavior ◽  
Load Transfer ◽  
Precast Concrete ◽  
Hysteretic Behavior ◽  
Experimental Investigations ◽  
Test Results ◽  
Energy Dissipation Capacity

In this study, two types of novel box connections were developed to connect precast concrete (PC) columns and to ensure load transfer integrity. Cyclic loading tests were conducted to investigate the seismic behavior of the PC columns with proposed connections as well as the feasibility and reliability of novel box connections. The failure mode, hysteretic behavior, bearing capacity, ductility, stiffness degradation and energy dissipation were obtained and discussed. The test results indicated that the all PC columns exhibited the ductile flexural failure mode and that the proposed connections could transfer the force effectively. The adoption of novel box connections could improve the deformation capacity and energy dissipation capacity of PC columns. A higher axial compression ratio could enhance the bearing capacity of PC column with proposed connection but would significantly deteriorate the ductility and energy dissipation capacity. Finite element models were developed and the feasibility of the models was verified by the comparison with the test results.

Sign in / Sign up

Export Citation Format

Share Document