scholarly journals Sustainable Brick Masonry Bond Design and Analysis: An Application of a Decision-Making Technique

2019 ◽  
Vol 9 (20) ◽  
pp. 4313
Author(s):  
Shah ◽  
Arshad ◽  
Farhan ◽  
Raza ◽  
Khan ◽  
...  
Keyword(s):  
Flexural Strength ◽  
Cement Mortar ◽  
Bond Formation ◽  
Maximum Level ◽  
Brick Masonry ◽  
Masonry Structures ◽  
Strength Tests ◽  
The Relationship ◽  
Interface Behaviour ◽  
Selection Of

This research intends to explore the sustainable masonry bond formation and interface behaviour of brick masonry bonds with different cement mortar ratios. To test the sustainable behaviour of different brick bonds, different tests were applied to evaluate the performance of the developed five brick masonry structures with the help of four mortar ratios. Following that pattern, the methodologies of a prism triplet test, a bond wrench test, a shear bond test and strength tests for brick masonry were applied. The prism triplet test explained the bonding behaviour of mortar by producing a maximum strength (0.21 MPa) with a 1:3 mix ratio, and the minimum strength (0.095 MPa) with a 1:8 mix ratio. The bond wrench test showed a bond strength of maximum 0.0685 MPa with a mortar ratio of 1:3 and a minimum of 0.035 MPa with a mortar ratio of 1:8. The strength tests for masonry structures expressed that compressive strength (0.786 MPa) and flexural strength (0.352 MPa) were found to be at maximum level with a mortar ratio (1:3) with an English bond formation. For predictions of compressive and flexural strength, artificial neural networks (ANNs) were deployed, and successful predictions of these values along with the relationships between different properties of the material, mortar combinations and bond combinations are presented to complete the exploration of the relationship. This pattern can be helpful for the selection of sustainable brick masonry formations for housing development.

Typical brick masonry walls reinforced with high-strength mortar and steel bars in the horizontal joints

2021 ◽  
pp. 136943322110122
Author(s):  
Xinqiang Yao ◽  
Bin Liang ◽  
Hai Zhang ◽  
Ziliang Zhang ◽  
Zheng He
Keyword(s):  
Cement Mortar ◽  
High Strength ◽  
Shear Capacity ◽  
Brick Masonry ◽  
Masonry Walls ◽  
Masonry Structures ◽  
Test Plan ◽  
Static Tests ◽  
Rural Buildings ◽  
Steel Bars

Based on investigation of rural buildings in china, there are more than 20% of the masonry structures constructed in 1970s. Thus, the old blue bricks (OBB) and old red bricks (ORB), which demolished from the typical brick masonry structures was built in 1970s, was chosen in the test. During demolishing the OBB and ORB, the original mortar was destroyed. Thus, the 1:7.8 cement mortar was chosen instead of original mortars and the 1:5 cement mortar was chosen as the reinforcement mortar. In order to know the performant of the reinforcement methods, there are three-level test plan was put forward in the study. Firstly, the mechanical properties of OBB and ORB and mortars was tested; Secondly, the experiment tested the shear strength of the reinforced and unreinforced masonry specimens along mortar joints; Thirdly, there are four walls (OBB reinforced wall and unreinforced wall, ORB reinforced wall and unreinforced wall) have been made for the pseudo-static tests. This research conducted physical performance tests on masonry bricks, masonry components, and masonry walls of typical masonry structures. Through experiments, the shear capacity of the masonry structure reinforced by high-strength mortar and steel bars can be obtained.

scholarly journals Mechanical Properties of Polypropylene Fiber Cement Mortar under Different Loading Speeds

2021 ◽  
Vol 13 (7) ◽  
pp. 3697
Author(s):  
Hui Chen ◽  
Xin Huang ◽  
Rui He ◽  
Zhenheng Zhou ◽  
Chuanqing Fu ◽  
...  
Keyword(s):  
Experimental Data ◽  
Mechanical Properties ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Relative Error ◽  
Cement Mortar ◽  
Polypropylene Fiber ◽  
Experimental Results ◽  
Strength Tests ◽  
Sample Age

In this work, the relationships between the mechanical properties (i.e., compressive strength and flexural strength) and loading speed of polypropylene fiber (PPF)-incorporated cement mortar at different ages (before 28 days) were studied. A total of 162 cubic samples for compressive strength tests and 162 cuboid samples for flexural strength tests were casted and tested. Analytical relationships between the sample properties (i.e., sample age, PPF content, and loading speed) and compressive and flexural strength were proposed based on the experimental data, respectively. Of the predicted compressive and flexural strength results, 70.4% and 75.9% showed less than 15% relative error compared with the experimental results, respectively.

Analysis of Regression for Strength Index of Concrete Performed Brick Masonry

2013 ◽  
Vol 639-640 ◽  
pp. 803-806
Author(s):  
Qi Fang Wang
Keyword(s):  
Compressive Strength ◽  
Bending Strength ◽  
Brick Masonry ◽  
Adjustment Coefficient ◽  
Masonry Structures ◽  
Strength Index ◽  
Strength Tests ◽  
Compressive Strength Of Concrete ◽  
Basic Strength ◽  
Regressive Analysis

Based on the data of the strength tests of concrete performed brick masonry，the basic strength formulas of concrete performed brick masonry are obtained. Through regressive analysis, it will be coherent to the compressive strength of concrete performed brick masonry to introduce the adjustment coefficient of mortar contrast to the Code for Design of Masonry Structures of China. The shear strength, bending strength along straight joint and bending strength along straight joint are uniform with the Code for Design of Masonry Structures of China.

IMPROVEMENT OF SPRING DURUM WHEAT SELECTION METHODOLOGIES UNDER CLIMATE CHANGE CONDITIONS

1970 ◽  
pp. 33-36
Author(s):  
А. I. Grabovets ◽  
V. P. Kadushkina ◽  
S. А. Kovalenko
Keyword(s):  
Grain Yield ◽  
Durum Wheat ◽  
Correlation Coefficient ◽  
Harvest Index ◽  
Unit Area ◽  
Correlation Coefficients ◽  
Chemical Mutagenesis ◽  
Main Method ◽  
The Relationship ◽  
Selection Of

With the growing aridity of the climate on the Don, it became necessary to improve the methodology for conducting the  breeding of spring durum wheat. The main method of obtaining the source material remains intraspecific step hybridization. Crossings were performed between genetically distant forms, differing in origin and required traits and properties. The use of chemical mutagenesis was a productive way to change the heredity of genotypes in terms of drought tolerance. When breeding for productivity, both in dry years of research and in favorable years, the most objective markers were identified — the size of the aerial mass, the mass of grain per plant, spike, and harvest index. The magnitude of the correlation coefficients between the yield per unit area and the elements of its structure is established. It was most closely associated with them in dry years, while in wet years it decreased. Power the correlation of the characteristics of the pair - the grain yield per square meter - the aboveground biomass averaged r = 0.73, and in dry years it was higher (0.91) than in favorable ones (0.61 - 0.70) , between the harvest and the harvest index - r = 0.81 (on average). In dry years, the correlation coefficient increased to 0.92. Research data confirms the greatest importance of the mass of grain from one ear and the plant in the formation of grain yield per unit area in both dry and wet years. In dry years, the correlation coefficient between yield and grain mass per plant was on average r = 0.80; in favorable years, r = 0.69. The relationship between yield and grain mass from the ear was greater — r = 0.84 and r = 0.82, respectively. Consequently, the breeding significance of the aboveground mass and the productivity of the ear, as a criterion for the selection of the crop, especially increases in the dry years. They were basic in the selection.

Analisa Pemilihan Moda Transportasi Umum Rute Tanjung Karang – Bandara Radin Inten II Dengan Stated Preference dan Uji Crame’s V

2018 ◽  
Vol 2 (2) ◽  
pp. 137
Author(s):  
Muhammad Abi Berkah Nadi
Keyword(s):  
Regression Analysis ◽  
Utility Function ◽  
Stated Preference ◽  
Technical Analysis ◽  
Chi Square ◽  
Time Headway ◽  
Independent Variable ◽  
The Relationship ◽  
Selection Of

Radin Inten II Airport is a national flight in Lampung Province. In this study using the technical analysis stated preference which is the approach by conveying the choice statement in the form of hypotheses to be assessed by the respondent. By using these techniques the researcher can fully control the hypothesized factors. To determine utility function for model forecasting in fulfilling request of traveler is used regression analysis with SPSS program. The analysis results obtained that the passengers of the dominant airport in the selection of modes of cost attributes than on other attributes. From the result of regression analysis, the influence of independent variable to the highest dependent variable is when the five attributes are used together with the R square value of 8.8%. The relationship between cost, time, headway, time acces and service with the selection of modes, the provision that states whether or not there is a decision. The significance of α = 0.05 with chi-square. And the result of Crame's V test average of 0.298 is around the middle, then the relationship is moderate enough.

Sunlight exposure: the effects on the performance of paragliding fabric

2018 ◽  
Vol 69 (05) ◽  
pp. 381-389
Author(s):  
MENGÜÇ GAMZE SÜPÜREN ◽  
TEMEL EMRAH ◽  
BOZDOĞAN FARUK
Keyword(s):  
Mechanical Properties ◽  
Aging Process ◽  
Air Permeability ◽  
Sunlight Exposure ◽  
Test Results ◽  
Coating Materials ◽  
Strength Tests ◽  
Before And After ◽  
The Relationship ◽  
Dark Blue

This study was designed to explore the relationship between sunlight exposure and the mechanical properties of paragliding fabrics which have different colors, densities, yarn counts, and coating materials. This study exposed 5 different colors of paragliding fabrics (red, turquoise, dark blue, orange, and white) to intense sunlight for 150 hours during the summer from 9:00 a.m. to 3:00 p.m. for 5 days a week for 5 weeks. Before and after the UV radiation aging process, the air permeability, tensile strength, tear strength, and bursting strength tests were performed. Test results were also evaluated using statistical methods. According to the results, the fading of the turquoise fabric was found to be the highest among the studied fabrics. It was determined that there is a significant decrease in the mechanical properties of the fabrics after sunlight exposure. After aging, the fabrics become considerably weaker in the case of mechanical properties due to the degradation in both the dyestuff and macromolecular structure of the fiber

A Biomarker Combining Imaging and Neuropsychological Assessment for Tracking Early Alzheimer's Disease in Clinical Trials

2018 ◽  
Vol 15 (5) ◽  
pp. 429-442 ◽  
Author(s):  
Nishant Verma ◽  
S. Natasha Beretvas ◽  
Belen Pascual ◽  
Joseph C. Masdeu ◽  
Mia K. Markey ◽  
...  
Keyword(s):  
Alzheimer’S Disease ◽  
Alzheimer's Disease ◽  
Clinical Trials ◽  
Cognitive Impairment ◽  
Latent Variable ◽  
Brain Regions ◽  
Disease Assessment ◽  
Latent Variable Analysis ◽  
The Relationship ◽  
Selection Of

Background: Combining optimized cognitive (Alzheimer's Disease Assessment Scale- Cognitive subscale, ADAS-Cog) and atrophy markers of Alzheimer's disease for tracking progression in clinical trials may provide greater sensitivity than currently used methods, which have yielded negative results in multiple recent trials. Furthermore, it is critical to clarify the relationship among the subcomponents yielded by cognitive and imaging testing, to address the symptomatic and anatomical variability of Alzheimer's disease. Method: Using latent variable analysis, we thoroughly investigated the relationship between cognitive impairment, as assessed on the ADAS-Cog, and cerebral atrophy. A biomarker was developed for Alzheimer's clinical trials that combines cognitive and atrophy markers. Results: Atrophy within specific brain regions was found to be closely related with impairment in cognitive domains of memory, language, and praxis. The proposed biomarker showed significantly better sensitivity in tracking progression of cognitive impairment than the ADAS-Cog in simulated trials and a real world problem. The biomarker also improved the selection of MCI patients (78.8±4.9% specificity at 80% sensitivity) that will evolve to Alzheimer's disease for clinical trials. Conclusion: The proposed biomarker provides a boost to the efficacy of clinical trials focused in the mild cognitive impairment (MCI) stage by significantly improving the sensitivity to detect treatment effects and improving the selection of MCI patients that will evolve to Alzheimer’s disease.

Excessive Belching: a Separate Syndrome or Another Symptom of Functional Dyspepsia?

2020 ◽  
Vol 30 (3) ◽  
pp. 55-60 ◽  
Author(s):  
A. A. Sheptulin ◽  
O. A. Storonova
Keyword(s):  
Functional Dyspepsia ◽  
Functional Gastrointestinal Disorders ◽  
High Resolution Manometry ◽  
Published Evidence ◽  
Key Points ◽  
Dyspeptic Symptoms ◽  
The Relationship ◽  
Rome Iv ◽  
Selection Of ◽  
Optimal Treatment Strategy

Aim of review. Interpretation of published evidence on the relationship between the excessive belching syndrome and functional dyspepsia (FD) and their management in patient care.Key points. According to the Rome IV criteria of functional gastrointestinal disorders (FGID), excessive belching in the absence of other dyspeptic symptoms is to be considered a manifestation of the excessive belching syndrome, which can be of gastric or supragastric nature. Combination of high-resolution manometry and impedancemetry allows an accurate diagnosis of belching and selection of optimal treatment strategy. Belching complicated by other symptoms of dyspepsia is to be considered yet another FD symptom according to the Rome IV criteria of FGID. Prokinetics are recommended to relieve belching in such cases.Conclusion. Understanding the relationship between the excessive belching syndrome and FD requires further research.

scholarly journals Mechanical Behavior of Brick Masonry in an Acidic Atmospheric Environment

Materials ◽  
2019 ◽  
Vol 12 (17) ◽  
pp. 2694 ◽  
Author(s):  
Shansuo Zheng ◽  
Lihua Niu ◽  
Pei Pei ◽  
Jinqi Dong
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Fly Ash ◽  
Acid Rain ◽  
Cement Mortar ◽  
Brick Masonry ◽  
Atmospheric Environment ◽  
Peak Strain ◽  
Lime Mortar ◽  
Attenuation Model

In order to evaluate the deterioration regularity for the mechanical properties of brick masonry due to acid rain corrosion, a series of mechanical property tests for mortars, bricks, shear prisms, and compressive prisms after acid rain corrosion were conducted. The apparent morphology and the compressive strength of the masonry materials (cement mortar, cement-lime mortar, cement-fly ash mortar, and brick), the shear behavior of the masonry, and the compression behavior of the masonry were analyzed. The resistance of acid rain corrosion for the cement-lime mortar prisms was the worst, and the incorporation of fly ash into the cement mortar did not improve the acid rain corrosion resistance. The effect of the acid rain corrosion damage on the mechanical properties for the brick was significant. With an increasing number of acid rain corrosion cycles, the compressive strength of the mortar prisms, and the shear and compressive strengths of the brick masonry first increased and then decreased. The peak stress first increased and then decreased whereas the peak strain gradually increased. The slope of the stress-strain curve for the compression prisms gradually decreased. Furthermore, a mathematical degradation model for the compressive strength of the masonry material (cement mortar, cement-lime mortar, cement-fly ash mortar, and brick), as well as the shear strength attenuation model and the compressive strength attenuation model of brick masonry after acid rain corrosion were proposed.

scholarly journals The Impact of Alkaloid-Producing Epichloë Endophyte on Forage Ryegrass Breeding: A New Zealand Perspective

Toxins ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 158
Author(s):  
Colin Eady
Keyword(s):  
Seed Production ◽  
Health Issues ◽  
Abiotic Stressors ◽  
Livestock Health ◽  
The Right ◽  
The Impact ◽  
The Relationship ◽  
And Storage ◽  
Selection Of ◽  
Epichloë Endophyte

For 30 years, forage ryegrass breeding has known that the germplasm may contain a maternally inherited symbiotic Epichloë endophyte. These endophytes produce a suite of secondary alkaloid compounds, dependent upon strain. Many produce ergot and other alkaloids, which are associated with both insect deterrence and livestock health issues. The levels of alkaloids and other endophyte characteristics are influenced by strain, host germplasm, and environmental conditions. Some strains in the right host germplasm can confer an advantage over biotic and abiotic stressors, thus acting as a maternally inherited desirable ‘trait’. Through seed production, these mutualistic endophytes do not transmit into 100% of the crop seed and are less vigorous than the grass seed itself. This causes stability and longevity issues for seed production and storage should the ‘trait’ be desired in the germplasm. This makes understanding the precise nature of the relationship vitally important to the plant breeder. These Epichloë endophytes cannot be ‘bred’ in the conventional sense, as they are asexual. Instead, the breeder may modulate endophyte characteristics through selection of host germplasm, a sort of breeding by proxy. This article explores, from a forage seed company perspective, the issues that endophyte characteristics and breeding them by proxy have on ryegrass breeding, and outlines the methods used to assess the ‘trait’, and the application of these through the breeding, production, and deployment processes. Finally, this article investigates opportunities for enhancing the utilisation of alkaloid-producing endophytes within pastures, with a focus on balancing alkaloid levels to further enhance pest deterrence and improving livestock outcomes.

Sign in / Sign up

Export Citation Format

Share Document