scholarly journals Tailored Chip Breaker Development for Polycrystalline Diamond Inserts: FEM-based Design and Validation

2019 ◽  
Vol 9 (19) ◽  
pp. 4117 ◽  
Author(s):  
Cascón ◽  
Sarasua ◽  
Elkaseer
Keyword(s):  
Surface Quality ◽  
Metal Cutting ◽  
High Surface ◽  
Cutting Tools ◽  
Polycrystalline Diamond ◽  
Critical Issue ◽  
Superior Performance ◽  
Machined Surface ◽  
Chip Breaker ◽  
High Surface Quality

Chip evacuation is a critical issue in metal cutting, especially continuous chips that are generated during the machining of ductile materials. The improper evacuation of these kinds of chips can cause scratching of the machined surface of the workpiece and worsen the resultant surface quality. This scenario can be avoided by using a properly designed chip breaker. Despite their relevance, chip breakers are not in wide-spread use in polycrystalline diamond (PCD) cutting tools. This paper presents a systematic methodology to design chip breakers for PCD turning inserts through finite element modelling. The goal is to evacuate the formed chips from the cutting zone controllably and thus, maintain surface quality. Particularly, different scenarios of the chip formation process and chip curling/evacuation were simulated for different tool designs. Then, the chip breaker was produced by laser ablation. Finally, experimental validation tests were conducted to confirm the ability of this chip breaker to evacuate the chips effectively. The machining results revealed superior performance of the insert with chip breaker in terms of the ability to produce curly chips and high surface quality (Ra = 0.51–0.56 µm) when compared with the insert without chip breaker that produced continuous chips and higher surface roughness (Ra = 0.74–1.61 µm).

On the Development of a Chip Breaker in a Metal-Matrix Polycrystalline Diamond Insert: Finite Element Based Design With ns-Laser Ablation and Machining Verification

2017 ◽  
Vol 5 (3) ◽  
Author(s):  
Ahmed Elkaseer ◽  
Jon Lambarri ◽  
Jon Ander Sarasua ◽  
Itxaso Cascón
Keyword(s):  
Finite Element ◽  
Metal Matrix ◽  
High Surface ◽  
Polycrystalline Diamond ◽  
Superior Performance ◽  
Process Conditions ◽  
Original Design ◽  
Dimensional Error ◽  
Chip Breaker ◽  
High Surface Quality

This paper reports the development of an original design of chip breaker in a metal-matrix polycrystalline diamond (MMPCD) insert brazed into a milling tool. The research entailed finite element (FE) design, laser simulation, laser fabrication, and machining tests. FE analysis was performed to evaluate the effectiveness of different designs of chip breaker, under specified conditions when milling aluminum alloy (Al A356). Then, the ablation performance of an MMPCD workpiece was characterized by ablating single trenches under different conditions. The profiles of the generated trenches were analyzed and fed into a simulation tool to examine the resultant thickness of ablated layers for different process conditions, and to predict the obtainable shape when ablating multilayers. Next, the geometry of the designated chip breaker was sliced into a number of layers to be ablated sequentially. Different ablation scenarios were experimentally investigated to identify the optimum processing conditions. The results showed that an ns laser utilized in a controllable manner successfully produced the necessary three-dimensional feature of an intricate chip breaker with high surface quality (Ra in the submicron range), tight dimensional accuracy (maximum dimensional error was less than 4%), and in an acceptable processing time (≈51 s). Finally, two different inserts brazed in milling tools, with and without the chip breaker, were tested in real milling trials. Superior performance of the insert with chip breaker was demonstrated by the curled chips formed and the significant reduction of obtained surface roughness compared to the surface produced by the insert without chip breaker.

scholarly journals Investigation on the Surface Quality Obtained during Trochoidal Milling of 6082 Aluminum Alloy

Machines ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 75
Author(s):  
Nikolaos E. Karkalos ◽  
Panagiotis Karmiris-Obratański ◽  
Szymon Kurpiel ◽  
Krzysztof Zagórski ◽  
Angelos P. Markopoulos
Keyword(s):  
Surface Roughness ◽  
Surface Quality ◽  
Process Parameters ◽  
Manufacturing Industry ◽  
High Surface ◽  
Cutting Tools ◽  
Cutting Speed ◽  
Depth Of Cut ◽  
High Surface Quality ◽  
Trochoidal Milling

Surface quality has always been an important goal in the manufacturing industry, as it is not only related to the achievement of appropriate geometrical tolerances but also plays an important role in the tribological behavior of the surface as well as its resistance to fatigue and corrosion. Usually, in order to achieve sufficiently high surface quality, process parameters, such as cutting speed and feed, are regulated or special types of cutting tools are used. In the present work, an alternative strategy for slot milling is adopted, namely, trochoidal milling, which employs a more complex trajectory for the cutting tool. Two series of experiments were initially conducted with traditional and trochoidal milling under various feed and cutting speed values in order to evaluate the capabilities of trochoidal milling. The findings showed a clear difference between the two milling strategies, and it was shown that the trochoidal milling strategy is able to provide superior surface quality when the appropriate process parameters are also chosen. Finally, the effect of the depth of cut, coolant and trochoidal stepover on surface roughness during trochoidal milling was also investigated, and it was found that lower depths of cut, the use of coolant and low values of trochoidal stepover can lead to a considerable decrease in surface roughness.

scholarly journals Functional Approach to Development of Hybrid Technology of Cutting Diamond Carbides

2018 ◽  
Vol 1 (1) ◽  
Author(s):  
А.F. Salenko ◽  
V.Т. Shchetinin ◽  
G.V. Gabuzian ◽  
V.А. Nikitin ◽  
S.А. Klymenko ◽  
...  
Keyword(s):  
Surface Quality ◽  
High Surface ◽  
Polycrystalline Diamond ◽  
Functional Approach ◽  
Surface Layers ◽  
High Surface Quality ◽  
Cut Quality ◽  
Multilayered Composites ◽  
Approach Method ◽  
Product Part

Background: Modern composite materials have a number of advantages in comparison with the traditionally used ones and allow implementing new methods of processing, which makes the finished product cheaper and makes its use more efficient.Objective: In order to improving the surface quality and productivity taken by A functional approach. Method: A functional approach to the development of cutting technologies for Carbide and Super Hard Multilayered Composites is considered. It allows, by alternating the effects of different nature, to obtain qualitative edges, to lower the residual stresses in the surface layers, and to achieve a high surface quality. The essence of the approach is that the method of impact is determined on the basis of a morphological search of options for the execution of individual surface elements, each of which, combined into a set, uniquely forms the function of the finished product. The cutting is determined by a rational sequence of execution of technological transitions, provided that each harmful intermediate function at the finish stage turns into neutral or complements the required useful function.Results: Examples of figured cutting of plates from polycrystalline diamond-containing materials are given, the results of obtaining qualitative edges are shown.Conclusion: Thanks to the proposed technology based on the use of a functionally oriented approach, the functions of the tool for cutting are divided between the tool itself and the product part. As a result, the processing speed increases more than 3 times, and a high cut quality is achieved.

scholarly journals Functional Approach to Development of Hybrid Technology of Cutting Diamond Carbides

2018 ◽  
Vol 2 (1) ◽  
Author(s):  
А.F. Salenko ◽  
V.Т. Shchetinin ◽  
G.V. Gabuzian ◽  
V.А. Nikitin ◽  
S.А. Klymenko ◽  
...  
Keyword(s):  
Surface Quality ◽  
High Surface ◽  
Polycrystalline Diamond ◽  
Functional Approach ◽  
Surface Layers ◽  
High Surface Quality ◽  
Cut Quality ◽  
Multilayered Composites ◽  
Approach Method ◽  
Product Part

Background: Modern composite materials have a number of advantages in comparison with the traditionally used ones and allow implementing new methods of processing, which makes the finished product cheaper and makes its use more efficient.Objective: In order to improving the surface quality and productivity taken by A functional approach. Method: A functional approach to the development of cutting technologies for Carbide and Super Hard Multilayered Composites is considered. It allows, by alternating the effects of different nature, to obtain qualitative edges, to lower the residual stresses in the surface layers, and to achieve a high surface quality. The essence of the approach is that the method of impact is determined on the basis of a morphological search of options for the execution of individual surface elements, each of which, combined into a set, uniquely forms the function of the finished product. The cutting is determined by a rational sequence of execution of technological transitions, provided that each harmful intermediate function at the finish stage turns into neutral or complements the required useful function.Results: Examples of figured cutting of plates from polycrystalline diamond-containing materials are given, the results of obtaining qualitative edges are shown.Conclusion: Thanks to the proposed technology based on the use of a functionally oriented approach, the functions of the tool for cutting are divided between the tool itself and the product part. As a result, the processing speed increases more than 3 times, and a high cut quality is achieved.

scholarly journals Experimental investigation of the machining characteristics in diamond wire sawing of unidirectional CFRP

2021 ◽  
Author(s):  
Lukas Seeholzer ◽  
Stefan Süssmaier ◽  
Fabian Kneubühler ◽  
Konrad Wegener
Keyword(s):  
Surface Quality ◽  
Influencing Factors ◽  
Material Properties ◽  
High Surface ◽  
Workpiece Surface ◽  
High Surface Quality ◽  
High Productivity ◽  
Surface Temperatures ◽  
Process Forces ◽  
The Wire

AbstractEspecially for slicing hard and brittle materials, wire sawing with electroplated diamond wires is widely used since it combines a high surface quality with a minimum kerf loss. Furthermore, it allows a high productivity by machining multiple workpieces simultaneously. During the machining operation, the wire/workpiece interaction and thus the material removal conditions with the resulting workpiece quality are determined by the material properties and the process and tool parameters. However, applied to machining of carbon fibre reinforced polymers (CFRP), the process complexity potentially increases due to the anisotropic material properties, the elastic spring back potential of the material, and the distinct mechanical wear due to the highly abrasive carbon fibres. Therefore, this experimental study analyses different combinations of influencing factors with respect to process forces, workpiece surface temperatures at the wire entrance, and the surface quality in wire sawing unidirectional CFRP material. As main influencing factors, the cutting and feed speeds, the density of diamond grains on the wire, the workpiece thickness, and the fibre orientation of the CFRP material are analysed and discussed. For the tested parameter settings, it is found that while the influence of the grain density is negligible, workpiece thickness, cutting and feed speeds affect the process substantially. In addition, higher process forces and workpiece surface temperatures do not necessarily deteriorate the surface quality.

Variothermal Foam Injection Molding - Dimensional Stability with High Surface Quality

2017 ◽  
Vol 36 (3) ◽  
pp. 151-166 ◽  
Author(s):  
Christian Hopmann ◽  
Nicolai Lammert ◽  
Yuxiao Zhang
Keyword(s):  
Surface Quality ◽  
Surface Defects ◽  
Control Strategies ◽  
High Surface ◽  
Skin Layer ◽  
High Surface Quality ◽  
Major Disadvantage ◽  
Scope Of Application ◽  
Specific Material ◽  
Foam Injection Molding

Thermoplastic foam injection moulding offers various advantages for both processing and product design. Despite its many benefits, the moderate surface quality still constitutes a major disadvantage of this process. The mould temperature can be controlled dynamically to improve the surface quality. Different dynamic temperature control strategies are employed and analysed regarding their effectiveness and scope of application. Mould temperatures above the specific material transition temperatures allow the surface defects to be cured and enable the production of foamed thermoplastic parts with surface qualities comparable to those of the compact reference samples. The high mould temperatures during the injection phase alter the foam structure and the skin layer thicknesses, which impacts the mechanical properties.

scholarly journals Electropolishing Parametric Optimization of Surface Quality for the Fabrication of a Titanium Microchannel Using the Taguchi Method

Machines ◽  
2021 ◽  
Vol 9 (12) ◽  
pp. 325
Author(s):  
Muslim Mahardika ◽  
Martin Andre Setyawan ◽  
Tutik Sriani ◽  
Norihisa Miki ◽  
Gunawan Setia Prihandana
Keyword(s):  
Taguchi Method ◽  
Surface Quality ◽  
Process Parameters ◽  
Applied Voltage ◽  
High Surface ◽  
Machining Process ◽  
Machining Parameters ◽  
Pareto Analysis ◽  
High Surface Quality

Titanium is widely used in biomedical components. As a promising advanced manufacturing process, electropolishing (EP) has advantages in polishing the machined surfaces of material that is hard and difficult to cut. This paper presents the fabrication of a titanium microchannel using the EP process. The Taguchi method was adopted to determine the optimal process parameters by which to obtain high surface quality using an L9 orthogonal array. The Pareto analysis of variance was utilized to analyze the three machining process parameters: applied voltage, concentration of ethanol in an electrolyte solution, and machining gap. In vitro experiments were conducted to investigate the fouling effect of blood on the microchannel. The result shows that an applied voltage of 20 V, an ethanol concentration of 20 vol.%, and a machining gap of 10 mm are the optimum machining parameters by which to enhance the surface quality of a titanium microchannel. Under the optimized machining parameters, the surface quality improved from 1.46 to 0.22 μm. Moreover, the adhesion of blood on the surface during the fouling experiment was significantly decreased, thus confirming the effectiveness of the proposed method.

Influence of Manufacturing Process on the Fatigue Strength of Gears

2014 ◽  
Vol 1018 ◽  
pp. 269-276
Author(s):  
Andrea Reiß ◽  
Ulf Engel
Keyword(s):  
Fatigue Strength ◽  
Surface Quality ◽  
Fatigue Behavior ◽  
High Surface ◽  
Research Work ◽  
Dimensional Accuracy ◽  
Cold Forging ◽  
Hardness Distribution ◽  
Forming Process ◽  
High Surface Quality

With cold forging processes it is possible to produce parts characterized by high strength, high dimensional accuracy and high surface quality. In order to optimize the forming process and to be able to use the advantages of cold forging specifically and combined, it is necessary to find correlations between manufacturing parameters on the one side, strength and other properties like hardness distribution and surface quality of the component on the other side. The research work covered in this paper focuses on the correlation of the components properties influenced by its manufacturing history and their fatigue strength. The used component is a gear produced by a lateral cold forging process. For the investigations an experimental setup has been designed. The aim for the design of the setup is to reproduce the real contact condition for the contact of two gears. To obtain different component properties the production process of the gear was varied by producing the parts by a milling operation. First of all, the components’ properties, for example hardness distribution, remaining residual stresses, orientation of fibers and surface quality, were determined. The components’ fatigue behavior was determined using a high frequency pulsator and evaluated in terms of finite life fatigue strength and fatigue endurance limit. These examinations were used to produce Woehler curves for the differently manufactured components with a certain statistical data analysis method.

scholarly journals Analysis of critical negative rake angle and friction characteristics in orthogonal cutting of AL1060 and T2

2019 ◽  
Vol 103 (1) ◽  
pp. 003685041987806 ◽  
Author(s):  
Yanchun Ding ◽  
Guangfeng Shi ◽  
Hua Zhang ◽  
Guoquan Shi ◽  
Dongdong Han
Keyword(s):  
Metal Cutting ◽  
Orthogonal Cutting ◽  
Cutting Tools ◽  
Flow Characteristics ◽  
Rake Angle ◽  
Machined Surface ◽  
Friction Characteristics ◽  
Model Based ◽  
Stagnant Region ◽  
Cutting Experiments

The stagnant region often appears in front of the tool cutting edge, which is caused by mechanical inlay and excessive pressing in plastic metal cutting with large negative rake angle tools at a low speed. It results in the change of the effective negative rake angle which can affect the flow characteristics of material, the quality of machined surface and the abrasion loss of cutting tools. However, the critical negative rake angle model based on the existence of the stagnant region has not been reported yet. Therefore, in order to investigate the critical negative rake angle value considering the stagnant region, a critical negative rake angle model based on the principle of minimum required energy is established, and the correctness of the theoretical model is verified by orthogonal cutting experiments. At the same time, the influence of the critical value of the large negative rake angle tool on the machined surface quality is studied through different cutting experiments. These experimental results show that the deviations of both experimental and theoretical critical negative rake angle are less than 5% during the orthogonally cutting of the aluminium (AL1060) and copper (T2) materials by the negative rake angle tool. Meanwhile, the critical negative rake angle is related to the adhesive friction coefficient of tool–workpiece contact surface. The analysis of friction characteristics shows that the deviation values of both theoretical and experimental critical negative rake angle are proportional to the coefficient of adhesive friction and the thickness of the stagnant region. Critical negative rake angle has a significant effect on roughness and residual stress of the machined surface.

Sign in / Sign up

Export Citation Format

Share Document