scholarly journals Development of a Metamodel for Predicting Near-Field Propagation of Hazardous and Noxious Substances Spilled From a Ship

2019 ◽  
Vol 9 (18) ◽  
pp. 3838 ◽  
Author(s):  
Ko ◽  
Jeong ◽  
Lee ◽  
Lee
Keyword(s):  
Current Velocity ◽  
Propagation Velocity ◽  
Mass Fraction ◽  
Near Field ◽  
Cfd Simulations ◽  
Ansys Fluent ◽  
Propagation Behavior ◽  
Computational Fluid Dynamics Cfd ◽  
Transverse Propagation ◽  
Noxious Substances

This study aims to numerically analyze the near-field propagation behavior of hazardous and noxious substances (HNSs) and to develop a new metamodel for HNS propagation. Extensive computational fluid dynamics (CFD) simulations were conducted using the ANSYS FLUENT (V. 17.2) code for various HNS spill scenarios. We newly introduced several key parameters, including the streamwise propagation velocity, transverse propagation velocity, and averaged HNS mass fraction. From the results, the advection effect is more dominant with an increase in the current velocity and streamwise propagation velocity, and with a decrease in the transverse propagation velocity. Also, the HNS mass fraction decreases as the current velocity increases with the change of concentration and propagation area. Particularly, a new metamodel of HNS propagation based on the current CFD results was validated by the hidden point test, showing very good fit. We believe this model would make useful predictions under various scenarios without CFD simulations.

scholarly journals Numerical Simulation of Propagation Characteristics of Hazardous Noxious Substances Spilled from Transport Ships

2018 ◽  
Vol 8 (12) ◽  
pp. 2409 ◽  
Author(s):  
Chan Ho Jeong ◽  
Min Kyu Ko ◽  
Moonjin Lee ◽  
Seong Hyuk Lee
Keyword(s):  
Current Velocity ◽  
Propagation Velocity ◽  
Near Field ◽  
Navier Stokes ◽  
Surface Model ◽  
Least Squares Regression ◽  
Propagation Characteristics ◽  
Ansys Fluent ◽  
Dimensional Simulation ◽  
Noxious Substances

This study numerically investigates the propagation characteristics of hazardous noxious substances (HNSs) spilled from transport ships and suggests the metal model for predicting the HNS propagation velocity varied with the current velocity and HNS density. The commercial computational fluid dynamics (CFD) code ANSYS FLUENT (V. 17.2) was used for two-dimensional simulation based on the Reynolds-averaged Navier–Stokes (RANS) equation together with the standard k–ε model. The scalar transport equation was also solved to estimate the spatial and transient behaviors of HNS. The main parameters to analyze the near-field propagation characteristics of HNSs spilled from the ship were layer thickness, HNS concentration, and propagation velocity. It was found that advection becomes more dominant in propagating an HNS layer that becomes thinner as the current velocity increases. When the current velocity increased beyond a certain level (~0.75 m/s), the mixing effect made the HNS layer less dense but thicker. Consequently, lower-density HNS causes increased HNS concentrations at sea level. As the current velocity increased, the concentration distribution became homogeneous regardless of HNS density. In particular, the second-order response surface model provided for three variables on the basis of the numerical results for 15 cases with the use of the general least-squares regression method, showing a good fit. This model would be useful in estimating the propagation velocity of HNS spilled from a ship.

CFD Simulation of Slug Dissipation in an Enlarged Impacting Tee

2019 ◽  
Author(s):  
Mobina Mohammadikharkeshi ◽  
Mazdak Parsi ◽  
Ramin Dabirian ◽  
Ram S. Mohan ◽  
Ovadia Shoham
Keyword(s):  
Experimental Data ◽  
Void Fraction ◽  
Cfd Simulation ◽  
Petroleum Industry ◽  
Production Operation ◽  
Cfd Simulations ◽  
Ansys Fluent ◽  
Transient Model ◽  
Diameter Pipe ◽  
Computational Fluid Dynamics Cfd

Abstract Slug flow, which commonly occurs in the petroleum industry, is not always a desired flow pattern due to production operation problems it may cause in pipelines and processing facilities. To mitigate these problems, flow conditioning devices such as multiphase flow manifolds and slug catchers are used, where dissipation of slugs occurs in downward flow or in larger diameter pipe sections. Tee-junctions are important parts of these flow conditioning devices. In this work, Computational Fluid Dynamics (CFD) simulations are conducted using ANSYS/FLUENT 17.2 to investigate slug dissipation in an Enlarged Impacting Tee-Junction (EIT). An Eulerian–Eulerian MultiFluid VOF transient model in conjunction with the standard k-ε turbulent model is used to simulate slug dissipation in an EIT geometry. The EIT consists of a 0.05 m ID 10 m long inlet, which is connected to the center of a 0.074 m ID 5.5 m long section that forms the EIT branches. Moreover, experimental data are acquired on slug dissipation lengths in a horizontal EIT with a similar geometry as in the CFD simulations. The CFD results include the mean void fraction and cross-sectionally averaged void fraction time series in the EIT for different gas and liquid velocities. These results provide the inlet slug length and dissipation length in the EIT branches. The CFD results are evaluated against the experimental data demonstrating that the slug dissipation occurring in EIT branches can be predicted by simulation.

An Assessment of the Validity of Quasi-Steady Analysis of Pressure Relief Valves

2019 ◽  
Author(s):  
Christopher Doyle ◽  
William Dempster ◽  
Steven Taggart
Keyword(s):  
Steady State ◽  
High Fidelity ◽  
Cfd Simulations ◽  
Pressure Relief ◽  
Ansys Fluent ◽  
Interaction Processes ◽  
Transient Simulations ◽  
Flow Features ◽  
Pressure Relief Valves ◽  
Computational Fluid Dynamics Cfd

Abstract In this paper, the validity of the commonly used quasi-steady design approach to pressure relief valves (PRV) is examined by comparing detailed steady state conditions of valve behavior directly with transient conditions. To achieve this, a PRV conforming to ASME VIII standards was modelled using the commercial computational fluid dynamics (CFD) package ANSYS FLUENT to account for transient fluid-structure interaction processes. Detailed steady state CFD simulations were conducted using quasi-steady assumptions and compared to high fidelity transient moving mesh simulations to allow the piston forces to be examined. The results indicated that noticeably different magnitudes can occur between steady state and transient simulations; highlighting the possibility of significant differences occurring between quasi steady designed valves and their ultimate performance. In this paper, a single operating condition is examined, using air at 10.3 barg, for a 5231BX refrigeration valve supplied by the Henry Group to highlight the main issues. Analysis has indicated that the differences in performance are generated by temporal, short lived vortices at the piston surface which influences the bulk flow features as the disc accelerates and decelerates; altering the net disc forces when compared to steady state conditions.

Maximization of Solar Gains of an Air Collector by Simulations

2013 ◽  
Vol 284-287 ◽  
pp. 483-487 ◽  
Author(s):  
Ondrej Sikula ◽  
Vit Merka ◽  
Jiri Hirs ◽  
Josef Plášek
Keyword(s):  
Heat Transfer ◽  
Solar Energy ◽  
Solar Collector ◽  
Cfd Simulations ◽  
Ansys Fluent ◽  
Operation Conditions ◽  
Flow And Heat Transfer ◽  
Solar Air Collector ◽  
Computational Fluid Dynamics Cfd ◽  
The Impact

The paper deals with numerical simulations of the impact of design, shading, positioning and orientation of a solar air collector an efficiency of exploitation of solar energy. The solar collector is used to preheat of an air, which then is supplied into the building. There are various requirements for solar air collectors. We are focused on maximization of solar energy gain by optimizing geometry, orientation and positioning of a solar air collector. To achieve the desired objective was a combination of two methods used. The firs one is Computational Fluid Dynamics (CFD) simulations of flow and heat transfer by convection, conduction and radiation in software ANSYS Fluent. The second one is the numerical simulation of the annual operations of the collector in the software BSim. The result of this work is an optimal design and operation conditions of the air collector.

scholarly journals Mesh Properties for RANS Simulations of Airfoil-Shaped Profiles: A Case Study of Rudder Hydrodynamics

2021 ◽  
Vol 9 (10) ◽  
pp. 1062
Author(s):  
Suli Lu ◽  
Jialun Liu ◽  
Robert Hekkenberg
Keyword(s):  
Near Field ◽  
Reynolds Numbers ◽  
Far Field ◽  
Computational Domain ◽  
Ansys Fluent ◽  
Marine Propellers ◽  
Computational Fluid Dynamics Cfd ◽  
Naca 0012 ◽  
Mesh Properties

A good mesh is a prerequisite for achieving reliable results from Computational Fluid Dynamics (CFD) calculations. Mesh properties include mesh types, computational domain sizes, and node distributions. However, in literature, we found no clear consensus about what these properties should be. In this article, we performed a case study on ship rudders to determine what the suitable mesh properties are for airfoil-shaped profiles. A classic NACA 0012 profile is chosen as an example, and commercial packages ANSYS ICEM are applied for meshing with an ANSYS Fluent solver. With a strategy in consideration of relationships among different mesh properties, a comprehensive parametric investigation is conducted to study the impacts of these properties on the accuracy of rudder hydrodynamic coefficients obtained by CFD methods. The step-by-step study outputs recommended Reynolds numbers, domain sizes, and near- and far-field node distributions for mesh types with distinct topology structures, i.e., C-mesh, O-mesh, H-mesh, and Hybrid-mesh. Specifically, the study shows that a critical Reynolds number is needed for the perspective of efficiency, while a domain extending 60 times of the chord length enables the boundary effects to be negligible. As for node distributions, the near-field nodes should be treated carefully, compared with those in the far-field. After that, corresponding mesh properties for different calculation objectives are illustrated in detail based on the characteristics of mesh types mentioned above. With the proposed strategy for mesh refinements, impacts of different mesh properties on rudder hydrodynamics are clarified and recommended settings are applicable for other airfoil-shaped profiles such as wind turbines and marine propellers.

Smoke Clearance in an Underground Car Park using the Jet Fan System

2017 ◽  
Vol 14 (2) ◽  
Keyword(s):  
Steady State ◽  
Mass Fraction ◽  
Safety Issue ◽  
Fire Modeling ◽  
Cfd Simulations ◽  
Ansys Fluent ◽  
Fire Propagation ◽  
Car Park ◽  
Jet Fan ◽  
And Control

Fire propagation and control in underground car parks are of an important safety issue. This paper investigates the effect of the jet fan system on the smoke clearance in an underground car park using CFD simulations. Two fire locations were considered under a steady state fire source of 4 MW. The consideration of the fire zone was also studied. The underground car park used in this study is 5,290 m2 in area with a height of 3.7 m. A comparison between CFD results and analytical correlations for the fire modeling was made. The ANSYS FLUENT 14.0 software was used for all simulations. The results showed that the temperature is limited to the zone, where the fire is detected, and it is within an accepted range. The CO2 mass fraction was presented and showed how the jet fans contribute in reducing the smoke density and hence improve the visibility. It was found that dividing the car park into zones is highly recommended and should be taken in the design of the jet fan system.

scholarly journals Experimental and CFD Simulations of the Aerosol Flow in the Air Ventilating the Underground Excavation in Terms of SARS-CoV-2 Transmission

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4743
Author(s):  
Tomasz Janoszek ◽  
Zbigniew Lubosik ◽  
Lucjan Świerczek ◽  
Andrzej Walentek ◽  
Jerzy Jaroszewicz
Keyword(s):  
Numerical Calculations ◽  
Mining Institute ◽  
Ventilation Network ◽  
Underground Excavation ◽  
In Situ Tests ◽  
Ansys Fluent ◽  
Aerosol Emission ◽  
Ansys Cfx ◽  
Computational Fluid Dynamics Cfd

The paper presents the results of experimental and model tests of transport of dispersed fluid droplets forming a cloud of aerosol in a stream of air ventilating a selected section of the underground excavation. The excavation selected for testing is part of the ventilation network of the Experimental Mine Barbara of the Central Mining Institute. For given environmental conditions, such as temperature, pressure, relative humidity, and velocity of air, the distribution of aerosol droplet changes in the mixture of air and water vapor along the excavation at a distance was measured at 10 m, 25 m, and 50 m from the source of its emission. The source of aerosol emission in the excavation space was a water nozzle that was located 25 m from the inlet (inlet) of the excavation. The obtained results of in situ tests were related to the results of numerical calculations using computational fluid dynamics (CFD). Numerical calculations were performed using Ansys-Fluent and Ansys-CFX software. The dimensions and geometry of the excavation under investigation are presented. The authors describe the adopted assumptions and conditions for the numerical model and discuss the results of the numerical solution.

scholarly journals Using CFD to Evaluate Natural Ventilation through a 3D Parametric Modeling Approach

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2197
Author(s):  
Nayara Rodrigues Marques Sakiyama ◽  
Jurgen Frick ◽  
Timea Bejat ◽  
Harald Garrecht
Keyword(s):  
Natural Ventilation ◽  
Parametric Modeling ◽  
Cfd Simulations ◽  
3D Design ◽  
Post Process ◽  
Test House ◽  
Model Set ◽  
Computational Fluid Dynamics Cfd ◽  
Set Up ◽  
Passive Strategy

Predicting building air change rates is a challenge for designers seeking to deal with natural ventilation, a more and more popular passive strategy. Among the methods available for this task, computational fluid dynamics (CFD) appears the most compelling, in ascending use. However, CFD simulations require a range of settings and skills that inhibit its wide application. With the primary goal of providing a pragmatic CFD application to promote wind-driven ventilation assessments at the design phase, this paper presents a study that investigates natural ventilation integrating 3D parametric modeling and CFD. From pre- to post-processing, the workflow addresses all simulation steps: geometry and weather definition, including incident wind directions, a model set up, control, results’ edition, and visualization. Both indoor air velocities and air change rates (ACH) were calculated within the procedure, which used a test house and air measurements as a reference. The study explores alternatives in the 3D design platform’s frame to display and compute ACH and parametrically generate surfaces where air velocities are computed. The paper also discusses the effectiveness of the reference building’s natural ventilation by analyzing the CFD outputs. The proposed approach assists the practical use of CFD by designers, providing detailed information about the numerical model, as well as enabling the means to generate the cases, visualize, and post-process the results.

scholarly journals Dependence of the Flue Gas Flow on the Setting of the Separation Baffle in the Flue Gas Tract

2021 ◽  
Vol 11 (7) ◽  
pp. 2961
Author(s):  
Nikola Čajová Kantová ◽  
Alexander Čaja ◽  
Marek Patsch ◽  
Michal Holubčík ◽  
Peter Ďurčanský
Keyword(s):  
Particulate Matter ◽  
Flue Gas ◽  
Gas Flow ◽  
Negative Impact ◽  
Combustion Process ◽  
Cfd Simulations ◽  
Piv Measurements ◽  
Computational Fluid Dynamics Cfd ◽  
Particle Imaging ◽  
Combustion Of Solid Fuels

With the combustion of solid fuels, emissions such as particulate matter are also formed, which have a negative impact on human health. Reducing their amount in the air can be achieved by optimizing the combustion process as well as the flue gas flow. This article aims to optimize the flue gas tract using separation baffles. This design can make it possible to capture particulate matter by using three baffles and prevent it from escaping into the air in the flue gas. The geometric parameters of the first baffle were changed twice more. The dependence of the flue gas flow on the baffles was first observed by computational fluid dynamics (CFD) simulations and subsequently verified by the particle imaging velocimetry (PIV) method. Based on the CFD results, the most effective is setting 1 with the same boundary conditions as those during experimental PIV measurements. Setting 2 can capture 1.8% less particles and setting 3 can capture 0.6% less particles than setting 1. Based on the stoichiometric calculations, it would be possible to capture up to 62.3% of the particles in setting 1. The velocities comparison obtained from CFD and PIV confirmed the supposed character of the turbulent flow with vortexes appearing in the flue gas tract, despite some inaccuracies.

Analysis of Late Phase Severe Accident Phenomena in CANDU Plant

2017 ◽  
Vol 3 (2) ◽  
Author(s):  
D. Dupleac
Keyword(s):  
Heat Transfer ◽  
Fluid Dynamics ◽  
Late Phase ◽  
Severe Accident ◽  
Ansys Fluent ◽  
Water Depletion ◽  
Sources Of Uncertainty ◽  
Parametric Studies ◽  
Computational Fluid Dynamics Cfd ◽  
Containment Pressure

The paper overviews the analytical studies performed at Politehnica University of Bucharest on the analysis of late phase severe accident phenomena in a Canada Deuterium Uranium (CANDU) plant. The calculations start from a dry debris bed at the bottom of calandria vessel. Both SCDAPSIM/RELAP code and ansys-fluent computational fluid dynamics (CFD) code are used. Parametric studies are performed in order to quantify the effect of several identified sources of uncertainty on calandria vessel failure: metallic fraction of zirconium inside the debris, containment pressure, timing of water depletion inside calandria vessel, steam circulation in calandria vessel above debris bed, debris temperature at moment of water depletion inside calandria vessel, calandria vault nodalization, and the gap heat transfer coefficient.

Sign in / Sign up

Export Citation Format

Share Document