scholarly journals Coupling Effect of Space-Arrangement and Wall Thermal Resistance on Indoor Thermal Environment of Passive Solar Single-Family Building in Tibet

2019 ◽  
Vol 9 (17) ◽  
pp. 3594 ◽  
Author(s):  
Xiaoling Cui ◽  
Yangkai Zhang ◽  
Guochen Sang ◽  
Wenkang Wang ◽  
Yiyun Zhu ◽  
...  
Keyword(s):  
Solar Energy ◽  
Thermal Resistance ◽  
Air Temperature ◽  
Indoor Air ◽  
Thermal Environment ◽  
Living Room ◽  
Single Family ◽  
Indoor Thermal Environment ◽  
Building Model ◽  
Passive Solar

In areas where solar energy is abundant, such as the Tibetan plateau, passive solar buildings are attracting more and more attention and becoming a popular form of rural building. However, it is often difficult to achieve the satisfactory indoor thermal environment in a local rural passive solar single-family house. In order to improve the indoor thermal environment of passive solar buildings through building design, a systematic study of rural single-family buildings in Tibet was conducted. The basic parameters were investigated on the outdoor thermal environment, space-arrangement, envelope structure, and the indoor thermal environment. The building model considering space-arrangement modes was developed based on the survey data in multi-space passive solar buildings. The general physical and mathematical analysis models of multi-space passive solar buildings were established based on the heat transfer theory. Furthermore, the effects of space-arrangement and exterior wall thermal resistance on indoor air temperature were analyzed by numerical simulation. Results show that the indoor air temperature of the passive solar building is influenced by space-arrangement and wall thermal resistance together. When the space-arrangement of the building model was changed from “north-south through type” (mode a) to “through and separation combination” (mode b) and “north-south separation” (mode c), the indoor air temperature of the living room increased from 8.8 °C to 10.6 °C and 11.6 °C, with increases of 20.5% and 31.8%, respectively. In addition, equally increasing the thermal resistance of exterior walls in different orientations has different effects on the indoor air temperature. In the space-arrangement mode c, comparing with the temperature increment of the living room and bedroom caused by increasing thermal resistance of the south wall and north wall, the temperature increment of the living room caused by increasing thermal resistance of the east/west wall increased by 151.7% and 32.7%, and that of the bedroom increased by 609.1% and 239.1% respectively. This study can provide a reference for the optimal design of passive solar buildings in solar energy abundant areas.

scholarly journals Energy-saving potential of intermittent heating system: Influence of composite phase change wall and optimization strategy

2020 ◽  
pp. 014459872096921
Author(s):  
Yanru Li ◽  
Enshen Long ◽  
Lili Zhang ◽  
Xiangyu Dong ◽  
Suo Wang
Keyword(s):  
Energy Consumption ◽  
Thermal Comfort ◽  
Phase Change ◽  
Air Temperature ◽  
Indoor Air ◽  
Thermal Environment ◽  
Optimization Strategy ◽  
Indoor Thermal Environment ◽  
Indoor Thermal Comfort ◽  
Intermittent Heating

In the Yangtze River zone of China, the heating operation in buildings is mainly part-time and part-space, which could affect the indoor thermal comfort while making the thermal process of building envelope different. This paper proposed to integrate phase change material (PCM) to building walls to increase the indoor thermal comfort and attenuate the temperature fluctuations during intermittent heating. The aim of this study is to investigate the influence of this kind of composite phase change wall (composite-PCW) on the indoor thermal environment and energy consumption of intermittent heating, and further develop an optimization strategy of intermittent heating operation by using EnergyPlus simulation. Results show that the indoor air temperature of the building with the composite-PCW was 2–3°C higher than the building with the reference wall (normal foamed concrete wall) during the heating-off process. Moreover, the indoor air temperature was higher than 18°C and the mean radiation temperature was above 20°C in the first 1 h after stopping heating. Under the optimized operation condition of turning off the heating device 1 h in advance, the heat release process of the composite-PCW to the indoor environment could maintain the indoor thermal environment within the comfortable range effectively. The composite-PCW could decrease 4.74% of the yearly heating energy consumption compared with the reference wall. The optimization described can provide useful information and guidance for the energy saving of intermittently heated buildings.

scholarly journals The effects of building layouts and envelope on indoor thermal environment of Hui style traditional buildings in Wuyuan

2020 ◽  
Vol 194 ◽  
pp. 05013
Author(s):  
Xiaowei Hong ◽  
Guangjin Zhang ◽  
Yufeng Zhang
Keyword(s):  
Quantitative Analysis ◽  
Thermal Comfort ◽  
Air Temperature ◽  
Indoor Air ◽  
Thermal Environment ◽  
Field Investigation ◽  
Indoor Thermal Environment ◽  
Adaptive Thermal Comfort ◽  
Thermal Comfort Model

Indoor thermal environment of Hui style traditional houses is depended on surrounding environments, building layouts and envelope. Quantitative analysis of the effects of building layouts and envelope on indoor thermal environment is of great significance for preventions of traditional houses and design of new archaized houses. A field investigation was conducted on thirty-six traditional houses from nine villages in Wuyuan, and the typical buildings’ layout and envelope were determined. Four traditional buildings in different location in Wuyuan were selected for continual recording. The four buildings with four types of building layouts and envelope were analyzed by using local adaptive thermal comfort model, and the effects of building layouts and envelope of traditional buildings were clearly revealed. The most crucial way to improve indoor thermal environment in Hui style traditional buildings was raising the indoor air temperature.

Field Survey on Occupant Thermal Comfort of Cold Regions in Transition Season

2013 ◽  
Vol 805-806 ◽  
pp. 1620-1624 ◽  
Author(s):  
Wan Ying Qu
Keyword(s):  
Thermal Comfort ◽  
Air Temperature ◽  
Indoor Air ◽  
Field Survey ◽  
Thermal Environment ◽  
Thermal Sensation ◽  
Residential Buildings ◽  
Cold Regions ◽  
Indoor Thermal Environment ◽  
Transition Season

A thermal comfort field study was investigated in residential buildings of cold regions in transition season during which the indoor thermal environment conditions are measured, the thermal sensation value of the occupants is questioned and recorded. A seven-point thermal sensation scale was used to evaluate the thermal sensation. The statistical method was used to analyze the data and the conclusions are as follows in transition season: clothing increase in 0.1clo when the indoor air temperature is lowered by 1°C; and clothing will be a corresponding increase in 0.06clo when the outdoor air temperature is lowered by 1°C; clothing also varies with gender, age, weight and thermal history and other related; the measured thermal neutral temperature is 21.3°C; and the minimum accepted temperature is 11.4 °C in transition season in cold regions. Most people choose to change clothes, switch and other passive measures, and occasionally take active measures of heater, electric fans and others.

scholarly journals An Investigation of the Behavioral Characteristics of Higher- and Lower-Temperature Group Families in a Condominium Equipped with a HEMS System

Buildings ◽  
2018 ◽  
Vol 9 (1) ◽  
pp. 4 ◽  
Author(s):  
Rajan KC ◽  
Hom Rijal ◽  
Masanori Shukuya ◽  
Kazui Yoshida
Keyword(s):  
Thermal Comfort ◽  
Air Temperature ◽  
Indoor Air ◽  
Energy Use ◽  
Thermal Environment ◽  
Indoor Thermal Environment ◽  
Home Energy Management ◽  
Temperature Group ◽  
Higher Temperature ◽  
Lower Temperature

A home energy management system (HEMS) shows the energy used indoors so that the energy waste can be easily identified and reduced. Thermal comfort is related to the trend of energy use in buildings. We conducted a survey in a condominium equipped with a HEMS to determine the indoor thermal environment and various behaviors of the occupants taken for thermal comfort adjustment. The results showed that there is a large variation of indoor air temperatures according to season, floor and flat. We categorized families into two groups, one with higher and the other with lower average indoor temperatures. The indoor air temperature of the higher temperature group in summer was found to be higher than the recommended indoor temperature during the summer season in Japan. The higher temperature group tended to adopt behaviors, such as window opening and using a fan more often, than the lower temperature group. Due to the moderately high insulating levels in the building surveyed, the indoor air temperature of both groups was not low in winter. Heating was used less and irregular. The overall results indicate that the groups of families behaved differently to adjust the indoor thermal environment even though they were equipped with the same HEMS system.

scholarly journals Courtyard as Tropical Hot Humid Passive Design Strategy: Case Study of Indonesian Contemporary Houses in Surabaya Indonesia

2020 ◽  
Vol 20 (2) ◽  
pp. 1-12
Author(s):  
Agung Murti Nugroho ◽  
Andika Citraningrum ◽  
Wasiska Iyati ◽  
Mohd Hamdan Ahmad
Keyword(s):  
Air Temperature ◽  
Indoor Air ◽  
Thermal Environment ◽  
Aluminum Foil ◽  
Environment Design ◽  
Night Time ◽  
Indoor Thermal Environment ◽  
Air Temperatures ◽  
Boarding House ◽  
Cooling Effects

Courtyard in building contributes to indoor thermal environment. Courtyard element is commonly applied as passive cooling strategy in the design of boarding house in Indonesia. Courtyard has a potential aspect of being micro climate-modifier to reduce indoor air temperature during the day. This paper discusses the effects of courtyards on indoor thermal environment in Indonesian contemporary boarding houses using field measurement. This paper focuses on the indoor air temperature reduction of 5 courtyard houses design of the contemporary boarding house in Surabaya, East Java, Indonesia. The field experiment method was used for two physical environmental variables: the air temperature and relative humidity. Each sensor was shaded with a paper cups wrapped with the aluminum foil to prevent the effect of direct thermal radiation. Measurement was taken for approximately 23 days continuously in each building. The results of the measurement exposed that the form and enclosure element is pivotal in its thermal environment design consideration for tropical climate. Meanwhile, utilizing ventilation blocks as the primary enclosure also help reduce air temperature in hot-humid climates. The results showed that the indoor air temperatures in the courtyard and surrounding room were approximately 0.3-1.7°C lower than the outdoor air temperature during daytime. During night-time, indoor air temperatures inside swing to 0.8-1.9°C higher than the outdoor. The results of the thermal environment evaluation revealed that indoor air temperatures can be categorized as a neutral temperature of the measurement period. Therefore, the application of courtyards in contemporary boarding houses have proven as possible means of achieving sufficient cooling effects through full-day ventilation strategy, and showed improved performance when combined with ventilated blocks.

Study on Indoor Thermal Environment of Collection Multi-Layer Settlement Residential Building in Winter—Take the Herdsmen Settlement in Western Mountain Grassland as an Example

2017 ◽  
Vol 14 (1) ◽  
pp. 237-243 ◽  
Author(s):  
Lei Zhang ◽  
Jingyuan Zhao ◽  
Jiaping Liu ◽  
Ming Chang
Keyword(s):  
Air Temperature ◽  
Indoor Air ◽  
Thermal Environment ◽  
Residential Building ◽  
Field Testing ◽  
Indoor Thermal Environment ◽  
Comfort Index ◽  
Mountain Grassland ◽  
Temperature And Humidity ◽  
The Relationship

This study aimed to analyze the winter indoor thermal environment of collection multi-layer settlement residential building in China’s western mountain grassland area. The method of analysis is field testing and data calculation, include indoor air temperature and humidity, outdoor air temperature and humidity, thermal comfort index. The result shows the relationship between indoor thermal environment, envelope materials, heating methods, location of rooms and building type. In addition, the influence was quantified in 0~11 °C in winter. Finally, advice put forward to promote the indoor thermal environment.

scholarly journals An Interactive Task Conditioning System Featuring Personal Comfort Models and Non-Intrusive Sensing Techniques: A Field Study in Shanghai

Technologies ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 90
Author(s):  
Siliang Lu ◽  
Erica Cochran Hameen
Keyword(s):  
Thermal Comfort ◽  
Field Study ◽  
Air Temperature ◽  
Indoor Air ◽  
Thermal Environment ◽  
Thermal Sensation ◽  
New Paradigm ◽  
Dynamic Task ◽  
Current Task ◽  
Open Plan

Heating, ventilation and air-conditioning (HVAC) systems play a key role in shaping office environments. However, open-plan office buildings nowadays are also faced with problems like unnecessary energy waste and an unsatisfactory shared indoor thermal environment. Therefore, it is significant to develop a new paradigm of an HVAC system framework so that everyone could work under their preferred thermal environment and the system can achieve higher energy efficiency such as task ambient conditioning system (TAC). However, current task conditioning systems are not responsive to personal thermal comfort dynamically. Hence, this research aims to develop a dynamic task conditioning system featuring personal thermal comfort models with machine learning and the wireless non-intrusive sensing system. In order to evaluate the proposed task conditioning system performance, a field study was conducted in a shared office space in Shanghai from July to August. As a result, personal thermal comfort models with indoor air temperature, relative humidity and cheek (side face) skin temperature have better performances than baseline models with indoor air temperature only. Moreover, compared to personal thermal satisfaction predictions, 90% of subjects have better performances in thermal sensation predictions. Therefore, personal thermal comfort models could be further implemented into the task conditioning control of TAC systems.

Sign in / Sign up

Export Citation Format

Share Document