scholarly journals Vertical-Type Ni/GaN UV Photodetectors Fabricated on Free-Standing GaN Substrates

2019 ◽  
Vol 9 (14) ◽  
pp. 2895 ◽  
Author(s):  
Bing Ren ◽  
Meiyong Liao ◽  
Masatomo Sumiya ◽  
Jian Huang ◽  
Linjun Wang ◽  
...  
Keyword(s):  
Signal To Noise Ratio ◽  
Schottky Contact ◽  
High Signal ◽  
Threading Dislocation ◽  
High Electron ◽  
Free Standing ◽  
Lower Growth ◽  
Schottky Type ◽  
Lower Growth Rate ◽  
Self Powered

The authors report on a vertical-type visible-blind ultraviolet (UV) Schottky-type photodetector fabricated on a homoepitaxial GaN layer grown on free-standing GaN substrates with a semi-transparent Ni Schottky contact. Owing to the high-quality GaN drift layer with low-density threading dislocation and high electron mobility, the UV photodetector shows a high specific detectivity of more than 1012 Jones and a UV/visible discrimination ratio of ~1530 at −5 V. The photodetector also shows the excellent self-powered photo-response and a high signal-to-noise ratio of more than 104 at zero voltage. It is found that a relatively lower growth rate for the GaN epilayer is preferred to improve the performance of the Schottky-type photodetectors due to the better microstructure and surface properties.

scholarly journals A Self-Powered and Highly Accurate Vibration Sensor Based on Bouncing-Ball Triboelectric Nanogenerator for Intelligent Ship Machinery Monitoring

Micromachines ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 218
Author(s):  
Taili Du ◽  
Xusheng Zuo ◽  
Fangyang Dong ◽  
Shunqi Li ◽  
Anaeli Elibariki Mtui ◽  
...  
Keyword(s):  
Signal To Noise Ratio ◽  
Work Conditions ◽  
Copper Electrode ◽  
Vibration Sensor ◽  
High Signal ◽  
Triboelectric Nanogenerator ◽  
Vibration Exciter ◽  
Bouncing Ball ◽  
3D Printed ◽  
Self Powered

With the development of intelligent ship, types of advanced sensors are in great demand for monitoring the work conditions of ship machinery. In the present work, a self-powered and highly accurate vibration sensor based on bouncing-ball triboelectric nanogenerator (BB-TENG) is proposed and investigated. The BB-TENG sensor consists of two copper electrode layers and one 3D-printed frame filled with polytetrafluoroethylene (PTFE) balls. When the sensor is installed on a vibration exciter, the PTFE balls will continuously bounce between the two electrodes, generating a periodically fluctuating electrical signals whose frequency can be easily measured through fast Fourier transform. Experiments have demonstrated that the BB-TENG sensor has a high signal-to-noise ratio of 34.5 dB with mean error less than 0.05% at the vibration frequency of 10 Hz to 50 Hz which covers the most vibration range of the machinery on ship. In addition, the BB-TENG can power 30 LEDs and a temperature sensor by converting vibration energy into electricity. Therefore, the BB-TENG sensor can be utilized as a self-powered and highly accurate vibration sensor for condition monitoring of intelligent ship machinery.

scholarly journals Electrochemical Biosensor Based on Optimized Biocomposite for Organophosphorus and Carbamates Pesticides Detection

2018 ◽  
Vol 2018 ◽  
pp. 1-13 ◽  
Author(s):  
R. Montes ◽  
F. Céspedes ◽  
D. Gabriel ◽  
M. Baeza
Keyword(s):  
Electrochemical Properties ◽  
Electrochemical Impedance ◽  
Signal To Noise Ratio ◽  
Tap Water ◽  
Electrochemical Techniques ◽  
High Signal ◽  
High Electron ◽  
Optimal Composition ◽  
Order Of Magnitude ◽  
Standard Composition

This paper presents the characterization and optimization of biosensors based on graphite-epoxy which incorporates the enzyme acetylcholinesterase (AChE). By means of advanced electrochemical techniques, such as electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV), the characterization and optimization of graphite-epoxy-AChE biosensors have been performed. In order to obtain sensitive electrodes, the optimal composition of the transducer material (graphite-epoxy-enzyme ratio) was studied. The optimization of the conductive particles distribution inside the biomaterial has allowed an improvement of the electrochemical properties. Optimal composition guarantees improving electrochemical properties required, such as high electron-transfer rate, high signal-to-noise ratio, and suitable sensitivity. The optimal biocomposite composition range was obtained between 16% and 17% of graphite and 0.12% of AChE. The biosensors were applied to the analysis of different pesticides, organophosphorus and carbamates, using indirect measurements based on enzymatic inhibition process. These optimized biosensors present detection limit one order of magnitude lower compared to the standard composition (nonoptimized) and allow achieving concentrations lower than the established ones by the pesticides regulation. Finally, spiked tap water samples with pesticides were analyzed with the optimized biosensors.

scholarly journals Radial Carboxyterminal Peptides of Tubulin Directly Imaged in Microtubules by Electron Microscopy Tomography Exploiting Emplitude Contrast

2021 ◽  
Author(s):  
Andrea Fera ◽  
Thomas Reese ◽  
Joshua Zimmerberg ◽  
Dan Sackett
Keyword(s):  
Electron Microscopy ◽  
Outer Surface ◽  
Electron Beam Irradiation ◽  
Signal To Noise Ratio ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
High Signal ◽  
High Electron ◽  
Microscopy Image ◽  
Multiple Samples

Abstract Tubulin carboxyterminal tails (CTT) are peptides of 10-20 amino acids, unstructured and acidic, that vary in sequence between tubulin isotypes and are exposed on the outer surface of microtubules (MTs). These peptides have, so far, eluded direct visualization. In this report, electron microscopy tomography was applied to isolated MTs stained with Uranyl and tungstate salts demonstrated to resist sustained electron beam irradiation. Such resistance of high electron doses allows each electron microscopy image to be recorded with a high signal-to-noise ratio. Corresponding tomograms reconstructed from tilt series at high magnification show exceptional resolution of details, revealing features of average dimension ~ 1 nm without the need of averaging multiple samples. The known three-dimensional structure of the MT wall is apparent. But now images also reveal small stalks on the outer surface of MTs. Inspection of virtual sections demonstrates that the stalks are up to ~2.5 nm long and ~1 nm wide (at half length), protruding every 4 ± 0.8 (22) nm along the microtubule. This spacing corresponds to one stalk per tubulin monomer. The grafting point on each monomer is not random but is positioned at one end of each monomer, identifying that end as toward the (-) end of the MT. The stalks are not observed following CTT removal with subtilisin. We conclude that these stalks are the CTT peptides of tubulin.

scholarly journals A Flexible Piezoelectric Energy Harvester-Based Single-Layer WS2 Nanometer 2D Material for Self-Powered Sensors

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2097
Author(s):  
Quan Wang ◽  
Kyung-Bum Kim ◽  
Sang Bum Woo ◽  
Yoo Seob Song ◽  
Tae Hyun Sung
Keyword(s):  
Signal To Noise Ratio ◽  
Single Layer ◽  
High Sensitivity ◽  
Human Movement ◽  
Piezoelectric Sensor ◽  
Human Motion ◽  
High Signal ◽  
Human Machine Interaction ◽  
Piezoelectric Energy ◽  
Self Powered

A piezoelectric sensor is a typical self-powered sensor. With the advantages of a high sensitivity, high frequency band, high signal-to-noise ratio, simple structure, light weight, and reliable operation, it has gradually been applied to the field of smart wearable devices. Here, we first report a flexible piezoelectric sensor (FPS) based on tungsten disulfide (WS2) monolayers that generate electricity when subjected to human movement. The generator maximum voltage was 2.26 V, and the produced energy was 55.45 μJ of the electrical charge on the capacitor (capacity: 220 μF) when applying periodic pressing by 13 kg. The generator demonstrated here can meet the requirements of human motion energy because it generates an average voltage of 7.74 V (a knee), 8.7 V (a sole), and 4.58 V (an elbow) when used on a running human (weight: 75 kg). Output voltages embody distinct patterns for different human parts, the movement-recognition capability of the cellphone application. This generator is quite promising for smart sensors in human–machine interaction detecting personal movement.

A compact guided-wave EMAT with pulsed electromagnet for ferromagnetic tube inspection

2020 ◽  
Vol 64 (1-4) ◽  
pp. 951-958
Author(s):  
Tianhao Liu ◽  
Yu Jin ◽  
Cuixiang Pei ◽  
Jie Han ◽  
Zhenmao Chen
Keyword(s):  
Power Plants ◽  
Signal To Noise Ratio ◽  
Small Diameter ◽  
Performance Testing ◽  
Guided Wave ◽  
High Signal ◽  
Receiver Coil ◽  
Signal To Noise ◽  
Corrosion Defects

Small-diameter tubes that are widely used in petroleum industries and power plants experience corrosion during long-term services. In this paper, a compact inserted guided-wave EMAT with a pulsed electromagnet is proposed for small-diameter tube inspection. The proposed transducer is noncontact, compact with high signal-to-noise ratio and unattractive to ferromagnetic tubes. The proposed EMAT is designed with coils-only configuration, which consists of a pulsed electromagnet and a meander pulser/receiver coil. Both the numerical simulation and experimental results validate its feasibility on generating and receiving L(0,2) mode guided wave. The parameters for driving the proposed EMAT are optimized by performance testing. Finally, feasibility on quantification evaluation for corrosion defects was verified by experiments.

Application of Novel Low Current OBIRCH Amplifier and Nanoprobing to Identify Subtle Leakages in Advanced Node Technologies

2018 ◽  
Author(s):  
Satish Kodali ◽  
Liangshan Chen ◽  
Yuting Wei ◽  
Tanya Schaeffer ◽  
Chong Khiam Oh
Keyword(s):  
Signal To Noise Ratio ◽  
Semiconductor Industry ◽  
Fault Isolation ◽  
Ring Oscillator ◽  
High Signal ◽  
The Novel ◽  
Resistance Change ◽  
Three Samples ◽  
Relative Threshold ◽  
First Time

Abstract Optical beam induced resistance change (OBIRCH) is a very well-adapted technique for static fault isolation in the semiconductor industry. Novel low current OBIRCH amplifier is used to facilitate safe test condition requirements for advanced nodes. This paper shows the differences between the earlier and novel generation OBIRCH amplifiers. Ring oscillator high standby leakage samples are analyzed using the novel generation amplifier. High signal to noise ratio at applied low bias and current levels on device under test are shown on various samples. Further, a metric to demonstrate the SNR to device performance is also discussed. OBIRCH analysis is performed on all the three samples for nanoprobing of, and physical characterization on, the leakage. The resulting spots were calibrated and classified. It is noted that the calibration metric can be successfully used for the first time to estimate the relative threshold voltage of individual transistors in advanced process nodes.

scholarly journals VS2 as saturable absorber for Q-switched pulse generation

Nanophotonics ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 2569-2576 ◽  
Author(s):  
Lu Li ◽  
Lihui Pang ◽  
Qiyi Zhao ◽  
Yao Wang ◽  
Wenjun Liu
Keyword(s):  
Saturable Absorber ◽  
Nonlinear Optical ◽  
Modulation Depth ◽  
Signal To Noise Ratio ◽  
Transition Metal Dichalcogenides ◽  
Laser Cavity ◽  
Pulse Generation ◽  
High Signal ◽  
Power Pulse ◽  
Metal Dichalcogenides

AbstractTransition metal dichalcogenides have been widely utilized as nonlinear optical materials for laser pulse generation applications. Herein, we study the nonlinear optical properties of a VS2-based optical device and its application as a new saturable absorber (SA) for high-power pulse generation. Few-layer VS2 nanosheets are deposited on the tapered region of a microfiber to form an SA device, which shows a modulation depth of 40.52%. After incorporating the microfiber-VS2 SA into an Er-doped fiber laser cavity, passively Q-switched pulse trains could be obtained with repetition rates varying from 95 to 233 kHz. Under the pump power of 890 mW, the largest output power and shortest pulse duration are measured to be 43 mW and 854 ns, respectively. The high signal-to-noise ratio of 60 dB confirms the excellent stability of the Q-switching state. To the best of our knolowdge, this is the first illustration of using VS2 as an SA. Our experimental results demonstrate that VS2 nanomaterials have a large potential for nonlinear optics applications.

scholarly journals Effects of Modification of Light Parameters on the Production of Cryptophycin, Cyanotoxin with Potent Anticancer Activity, in Nostoc sp.

Toxins ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 809
Author(s):  
Alexandros Polyzois ◽  
Diana Kirilovsky ◽  
Thi-hanh Dufat ◽  
Sylvie Michel
Keyword(s):  
Light Stress ◽  
Red Light ◽  
Major Effect ◽  
High Light Intensity ◽  
Efficient Production ◽  
Lower Growth ◽  
Noticeable Increase ◽  
Lower Growth Rate ◽  
Industrial Use ◽  
Effect Of Light

Cryptophycin-1 is a cyanotoxin produced by filamentous cyanobacteria. It has been evaluated as an anticancer agent with great potential. However, its synthesis provides insufficient yield for industrial use. An alternative solution for metabolite efficient production is to stress cyanobacteria by modifying the environmental conditions of the culture (Nostoc sp. ATCC 53789). Here, we examined the effects of light photoperiod, wavelength, and intensity. In light photoperiod, photoperiods 24:0 and 16:8 (light:dark) were tested while in wavelength, orange-red light was compared with blue. Medium, high, and very high light intensity experiments were performed to test the effect of light stress. For a 10-day period, growth was measured, metabolite concentration was calculated through HPLC, and the related curves were drawn. The differentiation of light wavelength had a major effect on the culture, as orange-red filter contributed to noticeable increase in both growth and doubled the cyanotoxin concentration in comparison to blue light. Remarkably, constant light provides higher cryptophycin yield, but slightly lower growth rate. Lastly, the microorganism prefers medium light intensities for both growth and metabolite expression. The combination of these optimal conditions would contribute to the further exploitation of cryptophycin.

scholarly journals Detection and localization of multiple small damages in beam

2021 ◽  
Vol 13 (1) ◽  
pp. 168781402098732
Author(s):  
Ayisha Nayyar ◽  
Ummul Baneen ◽  
Syed Abbas Zilqurnain Naqvi ◽  
Muhammad Ahsan
Keyword(s):  
Frequency Response ◽  
Natural Frequencies ◽  
Signal To Noise Ratio ◽  
Moving Average ◽  
A Priori ◽  
Damage Index ◽  
High Signal ◽  
Frequency Range ◽  
Spatial Locality ◽  
System Frequency

Localizing small damages often requires sensors be mounted in the proximity of damage to obtain high Signal-to-Noise Ratio in system frequency response to input excitation. The proximity requirement limits the applicability of existing schemes for low-severity damage detection as an estimate of damage location may not be known  a priori. In this work it is shown that spatial locality is not a fundamental impediment; multiple small damages can still be detected with high accuracy provided that the frequency range beyond the first five natural frequencies is utilized in the Frequency response functions (FRF) curvature method. The proposed method presented in this paper applies sensitivity analysis to systematically unearth frequency ranges capable of elevating damage index peak at correct damage locations. It is a baseline-free method that employs a smoothing polynomial to emulate reference curvatures for the undamaged structure. Numerical simulation of steel-beam shows that small multiple damages of severity as low as 5% can be reliably detected by including frequency range covering 5–10th natural frequencies. The efficacy of the scheme is also experimentally validated for the same beam. It is also found that a simple noise filtration scheme such as a Gaussian moving average filter can adequately remove false peaks from the damage index profile.

Sign in / Sign up

Export Citation Format

Share Document