scholarly journals Natural Convection of Dusty Hybrid Nanofluids in an Enclosure Including Two Oriented Heated Fins

2019 ◽  
Vol 9 (13) ◽  
pp. 2673 ◽  
Author(s):  
Raizah
Keyword(s):  
Natural Convection ◽  
Volume Fraction ◽  
Simple Algorithm ◽  
Systems Of Equations ◽  
Nusselt Numbers ◽  
Pressure Distributions ◽  
Nanoparticles Volume Fraction ◽  
Hybrid Nanofluids ◽  
Volume Method ◽  
Present Simulation

In the current work, the natural convection of dusty hybrid nanofluids in an enclosure including two inclined heated fins has been studied via mathematical simulation. The inclined heated fins are arranged near to the enclosure center with variations on their orientations and lengths. The present simulation is represented by two systems of equations for the hybrid nanofluids that are dusty. The pressure distributions for the dusty phase and hybrid nanofluids phase are evaluated using a SIMPLE algorithm based on the finite volume method. The numerical results are examined using contours of the streamlines, isotherms for the hybrid nanofluids and velocity components for the dusty phase. In addition, the graphical illustrations for profiles of the local and average Nusselt numbers are presented. The main results reveal that an increase in the mixture densities ratio and dusty parameter reduces the rate of the heat transfer. Both the local and average Nusselt numbers are supported as the fins lengths increase regardless of the fins’ rotation. In addition, the nanoparticles volume fraction enhances the thermal boundary layer near the top wall.

Numerical Study of Natural Convection in Vertical Cylindrical Annular Enclosure Filled with Cu-Water Nanofluid under Magnetic Fields

2019 ◽  
Vol 392 ◽  
pp. 123-137 ◽  
Author(s):  
Mohamed A. Medebber ◽  
Abderrahmane Aissa ◽  
Mohamed El Amine Slimani ◽  
Noureddine Retiel
Keyword(s):  
Natural Convection ◽  
Magnetic Fields ◽  
Volume Fraction ◽  
Numerical Study ◽  
Physical Parameters ◽  
Cold Temperatures ◽  
Simpler Algorithm ◽  
Wide Range ◽  
Nanoparticles Volume Fraction ◽  
Volume Method

The two dimensional study of natural convection in vertical cylindrical annular enclosure filled with Cu-water nanofluid under magnetic fields is numerically analyzed. The vertical walls are maintained at different uniform hot and cold temperatures, THand TC, respectively. The top and bottom walls of the enclosure are thermally insulated. The governing equations are solved numerically by using a finite volume method. The coupling between the continuity and momentum equations is effected using the SIMPLER algorithm. Numerical analysis has been carried out for a wide range of Rayleigh number (103≤Ra≤106), Hartmann number (1 ≤Ha≤100) and nanoparticles volume fraction (0 ≤φ≤0.08). The influence of theses physical parameters on the streamlines, isotherms and average Nusselt has been numerically investigated.

scholarly journals Numerical Study of Heat Transfer by Natural Convection in Concentric Hexagonal Cylinders Charged with a Nanofluid

2022 ◽  
Vol 17 ◽  
pp. 19-28
Author(s):  
Taloub Djedid ◽  
Bouras Abdelkrim ◽  
Zied Driss
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Volume Fraction ◽  
Numerical Study ◽  
Outer Cylinder ◽  
Boussinesq Approximation ◽  
Fixed Temperature ◽  
Nusselt Numbers ◽  
Volume Method ◽  
Rayleigh Numbers

In this document, a numerical study of the natural convection of steady-state laminar heat transfer in a horizontal ring between a heated hexagonal inner cylinder and a cold hexagonal outer cylinder. A Cu - water nanofluid traverses this annular space. The system of equations governing the problem was solved numerically by the fluent calculation code based on the finite volume method. Based on the Boussinesq approximation. The interior and exterior sides from the two cylinders are maintained at a fixed temperature. We investigated the impacts of various thermal Rayleigh numbers (103≤ Rat ≤2.5x105), and the volume fraction from the nanoparticles (0≤ Ø ≤0.12) on fluid flow and heat transfer performance. It is found that in high thermal Rayleigh numbers, a thin thermal boundary layer is illustrated at the flow that heavily strikes the ceiling and lower from the outer cylinder. In addition, the local and mean Nusselt number from a nanofluid are enhanced by enhancing the volume fraction of the nanoparticles.The results are shown within the figure of isocurrents, isotherms, and mean and local Nusselt numbers. Detailed results of the numerical has been compared with literature ones, and it gives a reliable agreement.

scholarly journals Mixed Convection and Entropy Generation of an Ag-Water Nanofluid in an Inclined L-Shaped Channel

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1150 ◽  
Author(s):  
Taher Armaghani ◽  
Muneer Ismael ◽  
Ali Chamkha ◽  
Ioan Pop
Keyword(s):  
Nusselt Number ◽  
Mixed Convection ◽  
Entropy Generation ◽  
Richardson Number ◽  
Volume Fraction ◽  
Governing Equations ◽  
Nanoparticles Volume Fraction ◽  
The Mean ◽  
The Right ◽  
Volume Method

This paper investigates the mixed convection and entropy generation of an Ag-water nanofluid in an L-shaped channel fixed at an inclination angle of 30° to the horizontal axis. An isothermal heat source was positioned in the middle of the right inclined wall of the channel while the other walls were kept adiabatic. The finite volume method was used for solving the problem’s governing equations. The numerical results were obtained for a range of pertinent parameters: Reynolds number, Richardson number, aspect ratio, and the nanoparticles volume fraction. These results were Re = 50–200; Ri = 0.1, 1, 10; AR = 0.5–0.8; and φ = 0.0–0.06, respectively. The results showed that both the Reynolds and the Richardson numbers enhanced the mean Nusselt number and minimized the rate of entropy generation. It was also found that when AR. increased, the mean Nusselt number was enhanced, and the rate of entropy generation decreased. The nanoparticles volume fraction was predicted to contribute to increasing both the mean Nusselt number and the rate of entropy generation.

Numerical Survey of the Melting Driven Natural Convection Using Generation Heat Source: Application to the Passive Cooling of Electronics Using Nano-Enhanced Phase Change Material

2019 ◽  
Vol 12 (2) ◽  
Author(s):  
Hamza Faraji ◽  
Mustapha Faraji ◽  
Mustapha El Alami
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Heat Source ◽  
Phase Change ◽  
Phase Change Material ◽  
Metallic Nanoparticles ◽  
Simple Algorithm ◽  
Bottom Side ◽  
Volume Method ◽  
Change Material

Abstract The present paper reports numerical results of the melting driven natural convection in an inclined rectangular enclosure filled with nano-enhanced phase change material (NePCM). The enclosure is heated from the bottom side by a flush-mounted heat source (microprocessor) that generates heat at a constant and uniform volumetric rate and mounted on a substrate (motherboard). All the walls are considered adiabatic. The purpose of the investigation is analyzing the effect of nanoparticles insertion by quantifying their contribution to the overall heat transfer. Combined effects of the PCM type, the inclination angle and the nanoparticles fraction on the structure of the fluid flow and heat transfer are investigated. A 2D mathematical model based on the conservation equations of mass, momentum, and energy was developed. The governing equations were integrated and discretized using the finite volume method. The SIMPLE algorithm was adopted for velocity–pressure coupling. The obtained results show that the nanoparticles insertion has an important quantitative effect on the overall heat transfer. The insertion of metallic nanoparticles with different concentrations affects the thermal behavior of the heat sink. They contribute to an efficient cooling of the heat source. The effect of nanoparticles insertion is also shown at the temperature distribution along the substrate.

Non-Darcy natural convection flow for non-Newtonian nanofluid over cone saturated in porous medium with uniform heat and volume fraction fluxes

2015 ◽  
Vol 25 (2) ◽  
pp. 422-437 ◽  
Author(s):  
A Chamkha ◽  
S Abbasbandy ◽  
A.M. Rashad
Keyword(s):  
Porous Medium ◽  
Natural Convection ◽  
Mass Flux ◽  
Volume Fraction ◽  
Viscosity Index ◽  
Convection Flow ◽  
Content Type ◽  
Surface Mass ◽  
Uniform Heat ◽  
Nanoparticles Volume Fraction

Purpose – The purpose of this paper is to investigate the effect of uniform lateral mass flux on non-Darcy natural convection of non-Newtonian fluid along a vertical cone embedded in a porous medium filled with a nanofluid. Design/methodology/approach – The resulting governing equations are non-dimensionalized and transformed into a non-similar form and then solved numerically by Keller box finite-difference method. Findings – A comparison with previously published works is performed and excellent agreement is obtained. Research limitations/implications – The model used for the nanofluid incorporates the effects of Brownian motion and thermophoresis. It is assumed that the cone surface is preamble for possible nanofluid wall suction/injection, under the condition of uniform heat and nanoparticles volume fraction fluxes. Originality/value – The effects of nanofluid parameters, Ergun number, surface mass flux and viscosity index are investigated on the velocity, temperature, and volume fraction profiles as well as the local Nusselt and Sherwood numbers.

Laminar Natural Convection Inside a Wavy Enclosure Heated From Top and Uniformly Cooled From the Bottom and Both Sides

2005 ◽  
Author(s):  
Amaresh Dalal ◽  
Manab Kumar Das
Keyword(s):  
Natural Convection ◽  
Simple Algorithm ◽  
Governing Equations ◽  
Square Cavity ◽  
Integral Forms ◽  
Nusselt Number Distribution ◽  
Laminar Natural Convection ◽  
Lower Temperature ◽  
Volume Method ◽  
Spatially Varying

In the present paper, natural convection inside a square cavity with one and three undulations on the top wall has been carried out. The top wall is heated by a spatially varying temperature and other three walls are kept constant lower temperature. The integral forms of the governing equations are solved numerically using finite-volume method in non-orthogonal body-fitted coordinate system. SIMPLE algorithm with higher-order up-winding scheme are used. The streamlines and isothermal lines are presented for different Rayleigh number (103-106) and a fluid having Prandtl number 0.71. Results are presented in the form of local and average Nusselt number distribution for two different undulations (1 and 3) with wave amplitude of 0.05.

Numerical Simulation of Nanofluid-Cooling Enhancement of Three Fins Mounted in a Horizontal Channel

2016 ◽  
Vol 138 (9) ◽  
Author(s):  
Moussa Khentoul ◽  
Rachid Bessaïh
Keyword(s):  
Volume Fraction ◽  
Numerical Study ◽  
Solid Volume Fraction ◽  
Horizontal Channel ◽  
Thermal Fields ◽  
Nusselt Numbers ◽  
Simpler Algorithm ◽  
Laminar Mixed Convection ◽  
Cooling Enhancement ◽  
Volume Method

This article presents a numerical study of two-dimensional laminar mixed convection in a horizontal channel. The upper horizontal wall of the channel is insulated. The governing equations were solved by using the finite volume method based on the simpler algorithm. Comparisons with previous results were performed and found to be in excellent agreement. The results were presented in terms of streamlines, isotherms, local and average Nusselt numbers for the Richardson number (0 ≤ Ri ≤ 10), Reynolds number (5 ≤ Re ≤ 100), solid volume fraction of nanoparticles (0 ≤ ϕ ≤ 0.10), and the type of nanofluids (Cu, Ag, Al2O3, and TiO2). The results show that the previous parameters have considerable effects on the flow and thermal fields. It was found that the heat transfer increases with increasing of Ra, Re, and ϕ.

scholarly journals Simulation of natural convection heat transfer using nanofluid in a concentric annulus

2017 ◽  
Vol 21 (3) ◽  
pp. 1275-1286 ◽  
Author(s):  
Keivan Fallah ◽  
Atena Ghaderi ◽  
Nima Sedaghatizadeh ◽  
Mohammad Borghei
Keyword(s):  
Natural Convection ◽  
Rayleigh Number ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Convection Heat Transfer ◽  
Thermal Characteristics ◽  
Width Ratio ◽  
Nusselt Numbers ◽  
Boltzmann Method ◽  
Gap Width

In the present study, natural convection of nanofluids in a concentric horizontal annulus enclosure has been numerically simulated using the lattice Boltzmann method. A water-based nanofluid containing Al2O3 nanoparticle has been studied. Simulations have been carried while the Rayleigh number ranges from 103 to 105 and solid volume fraction varies between 0 and 0.04. The effects of solid volume fraction of nanofluids on hydrodynamic and thermal characteristics such as average and local Nusselt numbers, streamlines, and isotherm patterns for different values of solid volume fraction, annulus gap width ratio and Rayleigh number are investigated and discussed in detail.

scholarly journals Natural Convection over Two Superellipse Shapes with a Porous Cavity Populated by Nanofluid

Energies ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6952
Author(s):  
Noura Alsedais
Keyword(s):  
Natural Convection ◽  
Rayleigh Number ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Darcy Number ◽  
Governing Equations ◽  
Porous Layers ◽  
Porous Cavity ◽  
The Mean ◽  
Volume Method

The influences of superellipse shapes on natural convection in a horizontally subdivided non-Darcy porous cavity populated by Cu-water nanofluid are inspected in this paper. The impacts of the inner geometries (n = 0.5,1,1.5,4) Rayleigh number (103 ≤ Ra ≤ 106), Darcy number (10−5 ≤ Da ≤ 10−2), porosity (0.2 ≤ ϵ ≤ 0.8), and solid volume fraction (0.01 ≤ ∅ ≤ 0.05) on nanofluid heat transport and streamlines were examined. The hot superellipse shapes were placed in the cavity’s bottom and top, while the adiabatic boundaries on the flat walls of the cavity were considered. The governing equations were numerically solved using the finite volume method (FVM). It was found that the movement of the nanofluid upsurged as Ra boosted. The temperature distributions in the cavity’s core had an inverse relationship with increasing Rayleigh number. An extra porous resistance at lower Darcy numbers limited the nanofluid’s movement within the porous layers. The mean Nusselt number decreased as the porous resistance increased (Da ≤ 10−4). The flow and temperature were strongly affected as the shape of the inner superellipse grew larger.

Sign in / Sign up

Export Citation Format

Share Document