scholarly journals Development of a Kernel Extreme Learning Machine Model for Capacity Selection of Distributed Generation Considering the Characteristics of Electric Vehicles

2019 ◽  
Vol 9 (12) ◽  
pp. 2401
Author(s):  
Zhongdong Yin ◽  
Jingjing Tu ◽  
Yonghai Xu
Keyword(s):  
Extreme Learning Machine ◽  
Distributed Generation ◽  
Electric Vehicles ◽  
Distribution Network ◽  
Support Vector ◽  
Kernel Extreme Learning Machine ◽  
Learning Machine ◽  
The Stability ◽  
Capacity Selection ◽  
Selection Of

The large-scale access of distributed generation (DG) and the continuous increase in the demand of electric vehicle (EV) charging will result in fundamental changes in the planning and operating characteristics of the distribution network. Therefore, studying the capacity selection of the distributed generation, such as wind and photovoltaic (PV), and considering the charging characteristic of electric vehicles, is of great significance to the stability and economic operation of the distribution network. By using the network node voltage, the distributed generation output and the electric vehicles’ charging power as training data, we propose a capacity selection model based on the kernel extreme learning machine (KELM). The model accuracy is evaluated by using the root mean square error (RMSE). The stability of the network is evaluated by voltage stability evaluation index (Ivse). The IEEE33 node distributed system is used as simulation example, and gives results calculated by the kernel extreme learning machine that satisfy the minimum network loss and total investment cost. Finally, the results are compared with support vector machine (SVM), particle swarm optimization algorithm (PSO) and genetic algorithm (GA), to verify the feasibility and effectiveness of the proposed model and method.

scholarly journals Optimized Kernel Extreme Learning Machine for Myoelectric Pattern Recognition

2018 ◽  
Vol 8 (1) ◽  
pp. 483
Author(s):  
Khairul Anam ◽  
Adel Al-Jumaily
Keyword(s):  
Pattern Recognition ◽  
Extreme Learning Machine ◽  
Healthy Subjects ◽  
Nearest Neighbor ◽  
Experimental Results ◽  
Support Vector ◽  
K Nearest Neighbor ◽  
Linear Discriminant ◽  
Kernel Extreme Learning Machine ◽  
Learning Machine

Myoelectric pattern recognition (MPR) is used to detect user’s intention to achieve a smooth interaction between human and machine. The performance of MPR is influenced by the features extracted and the classifier employed. A kernel extreme learning machine especially radial basis function extreme learning machine (RBF-ELM) has emerged as one of the potential classifiers for MPR. However, RBF-ELM should be optimized to work efficiently. This paper proposed an optimization of RBF-ELM parameters using hybridization of particle swarm optimization (PSO) and a wavelet function. These proposed systems are employed to classify finger movements on the amputees and able-bodied subjects using electromyography signals. The experimental results show that the accuracy of the optimized RBF-ELM is 95.71% and 94.27% in the healthy subjects and the amputees, respectively. Meanwhile, the optimization using PSO only attained the average accuracy of 95.53 %, and 92.55 %, on the healthy subjects and the amputees, respectively. The experimental results also show that SW-RBF-ELM achieved the accuracy that is better than other well-known classifiers such as support vector machine (SVM), linear discriminant analysis (LDA) and k-nearest neighbor (kNN).

A Hybrid Kernel Extreme Learning Machine and Improved Cat Swarm Optimization for Microarray Medical Data Classification

2020 ◽  
pp. 779-814
Author(s):  
S. Chakravarty ◽  
R. Bisoi ◽  
P. K. Dash
Keyword(s):  
Gene Expression ◽  
Support Vector Machine ◽  
Extreme Learning Machine ◽  
Medical Data ◽  
Support Vector ◽  
Swarm Optimization ◽  
Cat Swarm Optimization ◽  
Kernel Extreme Learning Machine ◽  
Learning Machine ◽  
Small Sample Sizes

This paper presents the pattern classification of the binary microarray gene expression based medical data using extreme learning machine (ELM) and its variants like on-line sequential ELM (OSELM) and kernel based extreme learning machine (KELM). In the KELM category two variants namely the wavelet based kernel (WKELM) extreme learning machine and radial basis kernel extreme learning machine (RKELM) along with support vector machine (SVMRBF) and support vector machine polynomial (SVMPoly) are used to classify microarray medical datasets. Further to reduce the high dimensionality of Microarray medical datasets giving rise to high number of gene expression and small sample sizes, a modified evolutionary cat swarm optimization (MCSO) technique is adopted. The efficiency of the proposed algorithm is verified using a set of performance metrics for four binary medical datasets belonging to breast cancer, prostate cancer, colon tumor, and leukemia, respectively.

Reproducing Polynomial Kernel Extreme Learning Machine

2017 ◽  
Vol 21 (5) ◽  
pp. 795-802 ◽  
Author(s):  
Yibo Li ◽  
Chao Liu ◽  
Senyue Zhang ◽  
Wenan Tan ◽  
Yanyan Ding ◽  
...  
Keyword(s):  
Extreme Learning Machine ◽  
Reproducing Kernel ◽  
Search Algorithm ◽  
Cuckoo Search ◽  
Cuckoo Search Algorithm ◽  
Polynomial Kernel ◽  
Support Vector ◽  
Fast Training ◽  
Kernel Extreme Learning Machine ◽  
Learning Machine

Conventional kernel support vector machine (KSVM) has the problem of slow training speed, and single kernel extreme learning machine (KELM) also has some performance limitations, for which this paper proposes a new combined KELM model that build by the polynomial kernel and reproducing kernel on Sobolev Hilbert space. This model combines the advantages of global and local kernel function and has fast training speed. At the same time, an efficient optimization algorithm called cuckoo search algorithm is adopted to avoid blindness and inaccuracy in parameter selection. Experiments were performed on bi-spiral benchmark dataset, Banana dataset, as well as a number of classification and regression datasets from the UCI benchmark repository illustrate the feasibility of the proposed model. It achieves the better robustness and generalization performance when compared to other conventional KELM and KSVM, which demonstrates its effectiveness and usefulness.

AUTOMATIC DETECTION OF CARDIOVASCULAR DISEASE USING DEEP KERNEL EXTREME LEARNING MACHINE

2018 ◽  
Vol 30 (06) ◽  
pp. 1850038
Author(s):  
Dongping Li
Keyword(s):  
Neural Network ◽  
Cardiovascular Disease ◽  
Feature Extraction ◽  
Deep Learning ◽  
Extreme Learning Machine ◽  
Learning Process ◽  
Support Vector ◽  
Learning Models ◽  
Kernel Extreme Learning Machine ◽  
Learning Machine

The electrocardiogram (ECG) is a principal signal employed to automatically diagnose cardiovascular disease in shallow and deep learning models. However, ECG feature extraction is required and this may reduce diagnosis accuracy in traditional shallow learning models, while backward propagation (BP) algorithm used by the traditional deep learning models has the disadvantages of local minimization and slow convergence rate. To solve these problems, a new deep learning algorithm called deep kernel extreme learning machine (DKELM) is proposed by combining the extreme learning machine auto-encoder (ELM-AE) and kernel ELM (KELM). In the new DKELM architecture with [Formula: see text] hidden layers, ELM-AEs are employed by the front [Formula: see text] hidden layers for feature extraction in the unsupervised learning process, which can effectively extract abstract features from the original ECG signal. To overcome the “dimension disaster” problem, the kernel function is introduced into ELM to act as classifier by the [Formula: see text]th hidden layer in the supervised learning process. The experiments demonstrate that DKELM outperforms the BP neural network, support vector machine (SVM), extreme learning machine (ELM), deep auto-encoder (DAE), deep belief network (DBN) in classification accuracy. Though the accuracy of convolutional neural network (CNN) is almost the same as DKELM, the computing time of CNN is much longer than DKELM.

scholarly journals Voltage Stability Margin Index Estimation Using a Hybrid Kernel Extreme Learning Machine Approach

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 857 ◽  
Author(s):  
Walter M. Villa-Acevedo ◽  
Jesús M. López-Lezama ◽  
Delia G. Colomé
Keyword(s):  
Data Base ◽  
Extreme Learning Machine ◽  
Voltage Stability ◽  
Stability Margin ◽  
Support Vector ◽  
Novel Approach ◽  
Voltage Stability Margin ◽  
Kernel Extreme Learning Machine ◽  
Artificial Neural Network Ann ◽  
Learning Machine

This paper presents a novel approach for Voltage Stability Margin (VSM) estimation that combines a Kernel Extreme Learning Machine (KELM) with a Mean-Variance Mapping Optimization (MVMO) algorithm. Since the performance of a KELM depends on a proper parameter selection, the MVMO is used to optimize such task. In the proposed MVMO-KELM model the inputs and output are the magnitudes of voltage phasors and the VSM index, respectively. A Monte Carlo simulation was implemented to build a data base for the training and validation of the model. The data base considers different operative scenarios for three type of customers (residential commercial and industrial) as well as N-1 contingencies. The proposed MVMO-KELM model was validated with the IEEE 39 bus power system comparing its performance with a support vector machine (SVM) and an Artificial Neural Network (ANN) approach. Results evidenced a better performance of the proposed MVMO-KELM model when compared to such techniques. Furthermore, the higher robustness of the MVMO-KELM was also evidenced when considering noise in the input data.

scholarly journals Automatic Sentiment Analysis Model Creation using Multi Kernel Improved Extreme Learning Machine

2020 ◽  
Vol 8 (6) ◽  
pp. 2727-2735
Keyword(s):  
Social Media ◽  
Sentiment Analysis ◽  
Extreme Learning Machine ◽  
Opinion Mining ◽  
Support Vector ◽  
Analysis Model ◽  
Feature Sets ◽  
Research Activities ◽  
Kernel Extreme Learning Machine ◽  
Learning Machine

Recent research activities related to opinion mining, sentiment analysis and emotion detection from natural language texts are all under the umbrella of affective computation. There is now a huge amount of textual information on social media (for example, forums, blogs, and social media) about consumers' ideas about buying products and service experiences. Sentiment analysis or opinion mining is part of an investigation that analyzes people's thoughts and feelings from written text available online. In this paper, this work present a comprehensive experiment to evaluate the effectiveness of psychological and linguistic features in emotion classification. In this scheme, we used five broad categories of LIWC (namely, psychological processes, linguistic processes, punctuation, spoken categories and personal concerns) as feature sets. Five types of LIWCs and their group combinations were considered in the experimental analysis. To understand the predictive performance of various aspects of the engineering scheme, five controlled learning algorithms (namely, Naïve Bayes, support vector machines, Extreme Learning Machine, Kernel Extreme Learning Machine, Multi Kernel Extreme Learning Machine) and proposed Multi Kernel Improved Extreme Learning Machine (MKIELM) are used. Experimental results show that the ensemble feature sets provides a higher predictive effect than the individual set..

A Hybrid Kernel Extreme Learning Machine and Improved Cat Swarm Optimization for Microarray Medical Data Classification

2016 ◽  
Vol 7 (3) ◽  
pp. 71-100 ◽  
Author(s):  
S. Chakravarty ◽  
R. Bisoi ◽  
P. K. Dash
Keyword(s):  
Gene Expression ◽  
Support Vector Machine ◽  
Extreme Learning Machine ◽  
Medical Data ◽  
Small Sample ◽  
Support Vector ◽  
Swarm Optimization ◽  
Cat Swarm Optimization ◽  
Kernel Extreme Learning Machine ◽  
Learning Machine

This paper presents the pattern classification of the binary microarray gene expression based medical data using extreme learning machine (ELM) and its variants like on-line sequential ELM (OSELM) and kernel based extreme learning machine (KELM). In the KELM category two variants namely the wavelet based kernel (WKELM) extreme learning machine and radial basis kernel extreme learning machine (RKELM) along with support vector machine (SVMRBF) and support vector machine polynomial (SVMPoly) are used to classify microarray medical datasets. Further to reduce the high dimensionality of Microarray medical datasets giving rise to high number of gene expression and small sample sizes, a modified evolutionary cat swarm optimization (MCSO) technique is adopted. The efficiency of the proposed algorithm is verified using a set of performance metrics for four binary medical datasets belonging to breast cancer, prostate cancer, colon tumor, and leukemia, respectively.

SVM–ELM: Pruning of Extreme Learning Machine with Support Vector Machines for Regression

2016 ◽  
Vol 25 (4) ◽  
pp. 555-566 ◽  
Author(s):  
Saif F. Mahmood ◽  
Mohammad H. Marhaban ◽  
Fakhrul Z. Rokhani ◽  
Khairulmizam Samsudin ◽  
Olasimbo Ayodeji Arigbabu
Keyword(s):  
Extreme Learning Machine ◽  
Optimal Number ◽  
Training Data ◽  
Computational Time ◽  
Support Vector ◽  
Benchmark Datasets ◽  
Clustering And Classification ◽  
Learning Machine ◽  
Hidden Nodes ◽  
Selection Of

AbstractExtreme Learning Machine provides very competitive performance to other related classical predictive models for solving problems such as regression, clustering, and classification. An ELM possesses the advantage of faster computational time in both training and testing. However, one of the main challenges of an ELM is the selection of the optimal number of hidden nodes. This paper presents a new approach to node selection of an ELM based on a 1-norm support vector machine (SVM). In this method, the targets of SVM yi ∈{+1, –1} are derived using the mean or median of ELM training errors as a threshold for separating the training data, which are projected to SVM dimensions. We present an integrated architecture that exploits the sparseness in solution of SVM to prune out the inactive hidden nodes in ELM. Several experiments are conducted on real-world benchmark datasets, and the results attained attest to the efficiency of the proposed method.

scholarly journals Wheel/Rail Adhesion State Identification of Heavy-Haul Locomotive Based on Particle Swarm Optimization and Kernel Extreme Learning Machine

2020 ◽  
Vol 2020 ◽  
pp. 1-6 ◽  
Author(s):  
Jianhua Liu ◽  
Linfan Liu ◽  
Jing He ◽  
Changfan Zhang ◽  
Kaihui Zhao
Keyword(s):  
Particle Swarm Optimization ◽  
Extreme Learning Machine ◽  
Particle Swarm ◽  
Support Vector ◽  
Swarm Optimization ◽  
State Identification ◽  
Kernel Parameter ◽  
Heavy Haul ◽  
Kernel Extreme Learning Machine ◽  
Learning Machine

The traction performance of heavy-haul locomotive is subject to the wheel/rail adhesion states. However, it is difficult to obtain these states due to complex adhesion mechanism and changeable operation environment. According to the influence of wheel/rail adhesion utilization on locomotive control action, the wheel/rail adhesion states are divided into four types, namely normal adhesion, fault indication, minor fault, and serious fault in this work. A wheel/rail adhesion state identification method based on particle swarm optimization (PSO) and kernel extreme learning machine (KELM) is proposed. To this end, a wheel/rail state identification model is constructed using KELM, and then the regularization coefficient and kernel parameter of KELM are optimized by using PSO to improve its accuracy. Finally, based on the actual data, the proposed method is compared with PSO support vector machines (PSO-SVM) and basic KELM, respectively, and the results are given to verify the effectiveness and feasibility of the proposed method.

Sign in / Sign up

Export Citation Format

Share Document