scholarly journals Performance of Warm-Mixed Flame Retardant Modified Asphalt Binder

2019 ◽  
Vol 9 (7) ◽  
pp. 1491
Author(s):  
Ruixia Li ◽  
Kaiwei Zhang ◽  
Jiahui Wu ◽  
Wenjuan Liu
Keyword(s):  
High Temperature ◽  
Flame Retardant ◽  
Performance Test ◽  
Asphalt Binder ◽  
Negative Influence ◽  
Viscosity Reduction ◽  
Asphalt Binders ◽  
Index Test ◽  
Flame Resistance ◽  
Limiting Oxygen Index

In order to analyze the effect of flame retardant and warm mix asphalt (WMA) additives-Sasobit on the flame-retardant performance and pavement performance of asphalt binder, the limiting oxygen index test, conventional performance test, and Superpave evaluation index tests were performed on asphalt binders in the study. The test results show that flame retardant can effectively improve the flame resistance of asphalt binder, while Sasobit has a certain combustion-supporting effect. Therefore, when warm-mixed flame-retardant technology is applied, the concentration of Sasobit should be controlled appropriately. These two modifiers can significantly enhance the high-temperature performance of asphalt binder, but both of them have a slight negative influence on the low-temperature cracking resistance. Sasobit can substantially reduce the high-temperature viscosity of asphalt binder, which helps to improve the construction workability of asphalt binder, while the flame retardant adversely affects the viscosity reduction effect of Sasobit to a certain extent, but the overall impact is not large.

scholarly journals Preparation of Flame Retardant Modified with Titanate for Asphalt Binder

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Bo Li ◽  
Jianxun Liu ◽  
Feng Han ◽  
Xiaoling Li ◽  
Liangying Li ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Flame Retardants ◽  
Performance Test ◽  
Oxygen Index ◽  
Orthogonal Experiment ◽  
Asphalt Binder ◽  
Complex Nature ◽  
Index Test ◽  
Limiting Oxygen Index ◽  
Low Dosage

Improving the compatibility between flame retardant and asphalt is a difficult task due to the complex nature of the materials. This study explores a low dosage compound flame retardant and seeks to improve the compatibility between flame retardants and asphalt. An orthogonal experiment was designed taking magnesium hydroxide, ammonium polyphosphate, and melamine as factors. The oil absorption and activation index were tested to determine the effect of titanate on the flame retardant additive. The pavement performance test was conducted to evaluate the effect of the flame retardant additive. Oxygen index test was conducted to confirm the effect of flame retardant on flame ability of asphalt binder. The results of this study showed that the new composite flame retardant is more effective in improving the compatibility between flame retardant and asphalt and reducing the limiting oxygen index of asphalt binder tested in this study.

scholarly journals Flame-Retardant Mechanism of Layered Double Hydroxides in Asphalt Binder

Materials ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 801 ◽  
Author(s):  
Kai Zhu ◽  
Yunhe Wang ◽  
Daquan Tang ◽  
Qiang Wang ◽  
Haihang Li ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Layered Double Hydroxides ◽  
Photoelectron Spectroscopy ◽  
Cone Calorimeter ◽  
Asphalt Binder ◽  
Bound Water ◽  
Asphalt Binders ◽  
Scanning Calorimetry ◽  
Limiting Oxygen Index ◽  
Double Hydroxides

The flame retardancy of asphalt binders with layered double hydroxides (LDHs) was investigated using limiting oxygen index (LOI) and cone calorimeter tests. The flame-retardant mechanism of the LDHs was also studied with thermogravimetry and differential scanning calorimetry (TG–DSC), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The cone calorimeter testing results indicated that 2 wt.% of the LDHs can decease the peak heat and smoke release rate of asphalt binders. Because a low dose of LDHs can be well dispersed in asphalt binder and favor the formation of polyaromatic structures during combustion, the thermal oxidation resistance and compactness of the char layer can be improved. The LOI of asphalt binder can be increased and the heat and smoke release during combustion can be decreased with 25 wt.% LDHs. The decomposition of LDHs can absorb the heat release of the initial two stages of asphalt combustion and reduce the burning rate of asphalt. Due to the loss of loosely bound water in the LDHs during the blending process and the decrease of dispersibility at a high LDH dose, the improvement of thermal stability is limited.

Development of thermally stable and hygienic colored cotton fabric made by treatment with natural coconut shell extract

2017 ◽  
Vol 48 (1) ◽  
pp. 87-118 ◽  
Author(s):  
MD Teli ◽  
Pintu Pandit
Keyword(s):  
Fourier Transform ◽  
Flame Retardant ◽  
Cotton Fabric ◽  
Oxygen Index ◽  
Fourier Transform Infrared ◽  
Cotton Fabrics ◽  
Energy Dispersive ◽  
Coconut Shell ◽  
Flame Resistance ◽  
Limiting Oxygen Index

As far as the value addition of textile is concerned, flame retardancy of textile materials is considered to be one of the most important properties in textile finishing by both industries as well as academic researchers. Flame-retardant property with thermal stability was imparted to cotton by using green coconut ( Cocos nucifera Linn) shell extract, a natural waste source of coconut. Coconut shell extract was analyzed by high-performance liquid chromatography, Fourier transform infrared spectroscopy, energy-dispersive spectrometry and its phytochemical analysis was also carried out. The coconut shell extract (acidic after extraction) was applied in three different pH (acidic, neutral, and alkaline) conditions to the cotton fabric. Flame-retardant properties of the untreated and the treated cotton fabrics were analyzed by limiting oxygen index and vertical flammability. The study showed that all the treated fabrics had good flame resistance property compared to that of the untreated fabric. The limiting oxygen index value was found to increase by 72.2% after application of the coconut shell extract from alkaline pH. Pyrolysis and char formation behavior of the concerned fabrics were studied using thermogravimetric analysis and differential scanning calorimetric analysis in a nitrogen atmosphere. The physicochemical composition of the untreated and coconut shell extract treated cotton fabrics were analyzed by attenuated total reflection–Fourier transform infrared, scanning electron microscope, and energy-dispersive X-ray spectroscopy. Also, treated cotton fabric showed natural brown color and antibacterial property against both Gram-positive and Gram-negative bacteria. The durability of the flame-retardant functionality to washing with soap solution has also been studied and reported in this paper.

A Facile Preparation of Environmentally-Benign and Flame-Retardant Coating on Wood by Comprising Polysilicate and Boric Acid

2021 ◽  
Author(s):  
Kaihao Wang ◽  
Shuheng Wang ◽  
Dan Meng ◽  
Dong Chen ◽  
Chenzhong Mu ◽  
...  
Keyword(s):  
Boric Acid ◽  
Flame Retardant ◽  
Wood Sample ◽  
Low Cost ◽  
Treated Wood ◽  
Environmentally Benign ◽  
Wood Combustion ◽  
Flame Resistance ◽  
Limiting Oxygen Index ◽  
Index Value

Abstract For the sake of direct using on the built wooden buildings, a green flame resistance coating comprising sodium polysilicate (SPS) and boric acid was prepared. With weight gain of only 10 wt.%, the treated wood sample (SPS/B-wood) performed improved limiting oxygen index value of 40.3% and passed the V-0 rating in UL-94 test. Additionally, the total heat release, total smoke production and peak carbon monoxide production of SPS/B-wood sample were decreased by 24.5%, 36.0% and 59.4% respectively, compared with that of control wood sample. The residue of SPS/B-wood sample was increased to 54.0% from 18.4% of control wood sample at 800oC in the thermogravimetry analysis. The flame retardant mechanism was suggested that SPS and boric acid formed Si-O-B and Si-O-Si contained structures, isolating the heat and smoke transfer during wood combustion. Notably, NaOH, introduced by the SPS/B coating, catalyzed the lignin to form compact and high-quality char. To conclude, this low-cost and easily-operated coating has a promising future utilizing in the villages with dense wood buildings.

Synthesis and Characterization of Phosphorus-Containing Flame Retardant Polyamide 66

2020 ◽  
Vol 977 ◽  
pp. 102-107
Author(s):  
Yu Lei Zheng ◽  
Shuang Chen ◽  
Jia Hui Wang ◽  
Ru Xiao
Keyword(s):  
Flame Retardant ◽  
Oxygen Index ◽  
Mechanical And Thermal Properties ◽  
Index Test ◽  
Polyamide 66 ◽  
Scanning Calorimetry ◽  
One Pot ◽  
Limiting Oxygen Index ◽  
Step Process ◽  
Phosphorus Containing

Polyamide 66 (PA66) benefits from excellent mechanical properties and good chemical resistance, which enabled wide application of this material in various industrial fields; however, it suffers from high flammability. Generally, preparation of a flame retardant PA from a reactive flame retardant involves a two-step process. In this study, the flame retardant PA66s (FRPA66s) are synthesized via a one-pot melt copolycondensation route by using a reactive phosphorus-containing flame retardant (FR-B). Then, molecular weight, some mechanical and thermal properties along with flame retardant properties of FRPA66s were investigated by gel permeation chromatography (GPC), instron material testing, differential scanning calorimetry (DSC), thermogravimetry (TG) analysis, vertical burning test (UL 94), and limiting oxygen index test (LOI) techniques. The experimental results confirmed that FRPA66s synthesized by the one-pot method have very similar properties compared to those obtained via the two-step process. Moreover, the prepared materials showed good non-flammability behavior with limiting oxygen index value of over 30% and a vertical burning test result of V-0 rating.

scholarly journals Synthesis of a DOPO-triazine additive and its flame-retardant effect in rigid polyurethane foam

e-Polymers ◽  
2019 ◽  
Vol 19 (1) ◽  
pp. 235-243 ◽  
Author(s):  
Lin Liu ◽  
Rui Lv
Keyword(s):  
Flame Retardant ◽  
Polyurethane Foam ◽  
Cell Structure ◽  
Rigid Polyurethane Foam ◽  
Flame Resistance ◽  
Limiting Oxygen Index ◽  
Flame Retarded ◽  
Flame Retardant Properties ◽  
Mechanical Performances ◽  
Halogen Free

AbstractA DOPO (9,10-dihydro-9-oxa-10-phosphaphen-anthrene-10-oxide)-based halogen-free flame retardant (ODOPM-CYC) was synthesized and incorporated in rigid polyurethane foam (RPUF). The structure of ODOPM-CYC was characterized by Fourier transform infrared spectra (FTIR), 1H NMR and 31P NMR. The effects of ODOPM-CYC on the flame resistance, mechanical performances, thermal properties and cell structure of RPUF were also investigated. The results showed that the incorporation of ODOPM-CYC strikingly enhanced flame retardant properties of RPUF. The flame retarded RPUF acquired a limiting oxygen index (LOI) value of 26% and achieved UL-94 V-0 rating with the phosphorus content of 3 wt%. The smoke production rate (SPR) also showed an obvious decrease and total smoke release (TSR) was 39.8% lower than that of neat RPUF. Besides, the results demonstrated that the incorporation of ODOPM-CYC provided RPUF better thermal stability but did not show any obvious influence on its thermal conductivity.

scholarly journals Experimental Study to Determine the Most Preferred Additive for Improving Asphalt Performance Using Polypropylene, Crumb Rubber, and Tafpack Super in Medium and High-Temperature Range

2019 ◽  
Vol 9 (8) ◽  
pp. 1567 ◽  
Author(s):  
Huang Xiaoming ◽  
Ismail Bakheit Eldouma
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Mechanical Performance ◽  
Asphalt Binder ◽  
Crumb Rubber ◽  
Asphalt Binders ◽  
Modified Bitumen ◽  
Asphalt Modification ◽  
Rotational Viscosity ◽  
Asphalt Performance

The overall objectives of this study were to determine the most appropriate additive for improving the physical properties and the medium- and high-temperature performances (mechanical performance) of asphalt binders. Three different types of modified binders were prepared: crumb rubber modifier (CRM), polypropylene (PP), and tafpack super (TPS), which had concentrations of 2%, 3%, 3.5%, and 4% by weight of asphalt binder, for each modifier. Their physical and rheological properties were evaluated by applying various tests such as ductility, rotational viscosity, toughness, and tenacity, as well as the dynamic shear rheometer (DSR) test. As a result, the physical properties of the modified bitumen binders were compared, as were the medium- and high-temperature performances (mechanical performance), which had temperatures of 58, 64, 70, 76, 82, and 88 °C, respectively. This was how the most appropriate modifier was determined. The results demonstrated that the asphalt binder properties significantly improved by utilizing CRM followed by PP and TPS modifiers. The increase in the rutting parameter (G*/sin(δ)) after asphalt modification indicated its excellent performance at both medium- and high-temperatures. Lastly, the CRM was determined as the most preferred additive because of its positive effect on the physical properties and enhancement of the medium- and high-temperature performance (mechanical performance).

scholarly journals Effect of Recycled Shell Waste as a Modifier on the High- and Low-Temperature Rheological Properties of Asphalt

2021 ◽  
Vol 13 (18) ◽  
pp. 10271
Author(s):  
Yuchen Guo ◽  
Xuancang Wang ◽  
Guanyu Ji ◽  
Yi Zhang ◽  
Hao Su ◽  
...  
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Rheological Properties ◽  
Low Temperatures ◽  
High Speed ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Modified Asphalt ◽  
Temperature Performance

The deteriorating ecological environment and the concept of sustainable development have highlighted the importance of waste reuse. This article investigates the performance changes resulting from the incorporation of shellac into asphalt binders. Seashell powder-modified asphalt was prepared with 5%, 10%, and 15% admixture using the high-speed shear method. The microstructure of the seashell powder was observed by scanning electron microscope test (SEM); the physical-phase analysis of the seashell powder was carried out using an X-ray diffraction (XRD) test; the surface characteristics and pore structure of shellac were analyzed by the specific surface area Brunauer-Emmett-Teller (BET) test; and Fourier infrared spectroscopy (FTIR) qualitatively analyzed the composition and changes of functional groups of seashell powder-modified asphalt. The conventional performance index of seashell powder asphalt was analyzed by penetration, softening point, and ductility (5 °C) tests; the effect of seashell powder on asphalt binder was studied using a dynamic shear rheometer (DSR) and bending beam rheometer (BBR) at high and low temperatures, respectively. The results indicate the following: seashell powder is a coarse, porous, and angular CaCO3 bio-material; seashell powder and the asphalt binder represent a stable physical mixture of modified properties; seashell powder improves the consistency, hardness, and high-temperature performance of the asphalt binder but weakens the low-temperature performance of it; seashell powder enhances the elasticity, recovery performance, and permanent deformation resistance of asphalt binders and improves high-temperature rheological properties; finally, seashell powder has a minimal effect on the crack resistance of asphalt binders at very low temperatures. In summary, the use of waste seashells for recycling as bio-modifiers for asphalt binders is a practical approach.

Synthesis and characterisation of the halogen-free flame retardant and mechanical performance of the retardant epoxies resin

2017 ◽  
Vol 46 (3) ◽  
pp. 172-180 ◽  
Author(s):  
Bing Liang ◽  
Jiao Lv ◽  
Gang Wang ◽  
Tsubaki Noritatsu
Keyword(s):  
Flame Retardant ◽  
Mechanical Performance ◽  
Cyanuric Chloride ◽  
Proton Nuclear Magnetic Resonance ◽  
Flame Resistance ◽  
Limiting Oxygen Index ◽  
Content Type ◽  
Ul 94 ◽  
Halogen Free ◽  
The Impact

Purpose The purpose of this paper is to prepare a novel halogen-free intumescent flame retardant (IFR) BHPPODC (benzene hydroquinone phosphorous oxy dichloride cyanuric chloride) for application to epoxy resin (EP) and study their mechanical and flame-retardant performance. Design/methodology/approach The IFR was synthesised by phenylphosphonic dichloride, hydroquinone and cyanuric chloride via solvent reaction, and the structure was fully characterised by proton nuclear magnetic resonance (1H-NMR), mass spectrometry (MS) and Fourier transform infrared (FT-IR) spectroscopy. The thermal stability, mechanical and flame properties and morphology of the char layer of the flame-retardant EP was investigated by using thermogravimetric analysis (TGA), tensile and Charpy impact tests, limiting oxygen index (LOI) and vertical burning test (UL-94) and scanning electron microscopy (SEM). Findings Results of the LOI indicated that the halogen-free flame retardant as an additive exhibits very good flame-retardant effects. The results showed that the addition of IFR improved the flame resistance properties of epoxies resin composites, and the residual char ratio at 800°C significantly increased. Research limitations/implications The IFR can be prepared successfully and can improve the flame-retardant performance. Practical implications This contribution can provide a high flame retardant performance and has minimal impact on the mechanical performance of the BHPPODC/EP composition. Originality/value This study showed that flame-retardant BHPPODC has an effective flame effect under optimal conditions. When the 12 Wt.% IFR was added to the EP, the LOI was 29.1 and the UL-94 rank can reach V-0 rank, the tensile strength was 83.86 MPa and the impact strength was 8.82 kJ/m2.

scholarly journals Polyurethane Hybrid Composites Reinforced with Lavender Residue Functionalized with Kaolinite and Hydroxyapatite

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 415
Author(s):  
Sylwia Członka ◽  
Agnė Kairytė ◽  
Karolina Miedzińska ◽  
Anna Strąkowska
Keyword(s):  
Thermal Decomposition ◽  
Compressive Strength ◽  
Impact Strength ◽  
Flexural Strength ◽  
Flame Retardant ◽  
Hybrid Composites ◽  
Thermal Characteristic ◽  
Flame Resistance ◽  
Limiting Oxygen Index ◽  
The Impact

Polyurethane (PUR) composites were modified with 2 wt.% of lavender fillers functionalized with kaolinite (K) and hydroxyapatite (HA). The impact of lavender fillers on selected properties of PUR composites, such as rheological properties (dynamic viscosity, foaming behavior), mechanical properties (compressive strength, flexural strength, impact strength), insulation properties (thermal conductivity), thermal characteristic (temperature of thermal decomposition stages), flame retardancy (e.g., ignition time, limiting oxygen index, heat peak release) and performance properties (water uptake, contact angle) was investigated. Among all modified types of PUR composites, the greatest improvement was observed for PUR composites filled with lavender fillers functionalized with kaolinite and hydroxyapatite. For example, on the addition of functionalized lavender fillers, the compressive strength was enhanced by ~16–18%, flexural strength by ~9–12%, and impact strength by ~7%. Due to the functionalization of lavender filler with thermally stable flame retardant compounds, such modified PUR composites were characterized by higher temperatures of thermal decomposition. Most importantly, PUR composites filled with flame retardant compounds exhibited improved flame resistance characteristics—in both cases, the value of peak heat release was reduced by ~50%, while the value of total smoke release was reduced by ~30%.

Sign in / Sign up

Export Citation Format

Share Document