scholarly journals Coupling Ultrasound with Heat-Reflux to Improve the Extraction of Quercetin, Kaempferol, Ginkgetin and Sciadopitysin from Mairei Yew Leaves

2019 ◽  
Vol 9 (4) ◽  
pp. 795
Author(s):  
Chunjian Zhao ◽  
Xueting Ren ◽  
Chunying Li ◽  
Hongwei Jiang ◽  
Jiajing Guan ◽  
...  
Keyword(s):  
Total Yield ◽  
Maximum Yield ◽  
Extraction Time ◽  
High Yield ◽  
Ultrasonic Power ◽  
Box Behnken Design ◽  
Extraction Solvent ◽  
Solid Ratio ◽  
Assisted Extraction ◽  
Ultrasonic Assisted

The coupling of ultrasound and heat–reflux extraction (UHRE) was developed for separation for quercetin (QU), kaempferol (KA), ginkgetin (GI) and sciadopitysin (SC) from Mairei Yew leaves. The Box–Behnken design was used to optimize the UHRE conditions for obtaining the maximum yield of flavonoids. The optimal extraction conditions were as follows: boiling 80% methanol (V/V) for extraction solvent, 20 min for the extraction time, 200 W for the ultrasonic power and 26 mL/g for the liquid–solid ratio. By UHRE, the yields of QU, KA, GI and SC were, respectively, 0.109, 0.406, 0.031 and 0.355 mg/g, and total yield of four flavonoids was 0.901 mg/g, which were, respectively, 1.25-fold and 1.23-fold higher than those by using ultrasonic-assisted extraction (UAE) and heating reflux extraction (HRE). Moreover, the extraction time for the equilibrium yields of flavonoids using UHRE was 83.3% and 27.8%, respectively, less than the corresponding time using UAE and HRE. Compared with HRE and UAE, UHRE showed the increase of cell disruption degree as observed by scanning electron microscopy, which may be the reason for high yield and rapid extraction of target compounds.

Optimizing the Conditions for Polysaccharides Ultrasonic-Assisted Extraction in Mycelium of Paecilomyces Tenuipes Pt196 Using Statistical Approach

2013 ◽  
Vol 756-759 ◽  
pp. 180-185
Author(s):  
Lin Na Du ◽  
Wen Ting Bu ◽  
Wen Lin Pan ◽  
Chen Shao ◽  
Jia Hui Lu ◽  
...  
Keyword(s):  
Neural Network ◽  
Genetic Algorithm ◽  
Artificial Neural Network ◽  
Ultrasonic Power ◽  
Box Behnken Design ◽  
Solid Ratio ◽  
Assisted Extraction ◽  
Ultrasonic Time ◽  
Ultrasonic Assisted ◽  
Artificial Neural

In order to enhance the extraction rate of polysaccharides, a series of statistical approach was used to optimize the ultrasonic-assisted extraction conditions from the mycelium of Paecilomyces tenuipes Pt196. [Metho The optimization of conditions was carried out in two stages. Firstly, the effects of various experimental parameters considered for the investigation (ultrasonic power, ultrasonic time and liquid-solid ratio) were studied using the method of single factor test design experiments. Secondly, a 15-run Box-Behnken design was performed to optimize the extraction conditions of polysaccharides. The experimental results of Box-Behnken design were analyzed by response surface methodology and artificial neural network together with genetic algorithm. [Result The optimum conditions for polysaccharides extraction obtained by the application of artificial neural network-genetic algorithm were ultrasonic time 345s, ultrasonic power 320 W and liquid-solid ratio 95 mL·g-1. [Conclusion Artificial neural network-genetic algorithm can effectively select the best extraction conditions of polysaccharides in this study.

Optimization of Ultrasonic-Assisted Extraction of Flavonols and Anthocyanins from Blueberry Using RSM

2012 ◽  
Vol 468-471 ◽  
pp. 2423-2430 ◽  
Author(s):  
Yao Tian ◽  
Yu Yang ◽  
Ping Gao ◽  
Jin Hong Wang ◽  
Ya Qin Xu ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Extraction Time ◽  
Ultrasonic Power ◽  
Experimental Conditions ◽  
Independent Variables ◽  
Solid Ratio ◽  
Assisted Extraction ◽  
Ultrasonic Assisted ◽  
Ultrasonic Assisted Extraction ◽  
Predicted Values

Ultrasonic-assisted extraction (UAE) method was developed for continued extraction of flavonols and anthocyanins from Blueberry. Response surface methodology (RSM) was employed to optimize experimental conditions for extraction of flavonols and anthocyanins. Three major independent variables such as ultrasonic power (W), extraction time (min), liquid to solid ratio (mL/g) were studied. The optimal extraction conditions of flavonols and anthocyanins were determined as follows: ultrasonic power 512.7 W, extraction time 29.8 min, liquid to solid ratio 9.5:1 mL /g. Under a modified condition (ultrasonic power 510W, extraction time 30 min, liquid to solid ratio 10:1 mL /g), the experimental yields of flavonols and anthocyanins were 0.806mg/g and 2.903mg/g respectively, which were agreed closely with the predicted values (0.804mg/g and 2.899mg/g).

Optimization of Ultrasonic-Assisted Extraction of Polysaccharides from Blackcurrant Using RSM

2012 ◽  
Vol 550-553 ◽  
pp. 1821-1825 ◽  
Author(s):  
Zhong Jie Ren ◽  
Yu Yang ◽  
Ya Qin Xu ◽  
Xing Guo Li ◽  
Ze Yuan Yu
Keyword(s):  
Response Surface Methodology ◽  
Processing Parameters ◽  
Extraction Time ◽  
Ultrasonic Power ◽  
Independent Variables ◽  
Solid Ratio ◽  
Assisted Extraction ◽  
Ultrasonic Assisted ◽  
Experimental Yield ◽  
Ultrasonic Assisted Extraction

Ultrasonic-assisted extraction (UAE) method was applied for polysaccharides from blackcurrant and response surface methodology (RSM) was used to optimize the effects of processing parameters on polysaccharides yields. Three major independent variables such as ultrasonic power (W), extraction time (min), liquid to solid ratio (mL/g) were studied. The optimal extraction conditions of polysaccharides were determined as follows: ultrasonic power 402.2 W, extraction time 25.5 min, liquid to solid ratio 20.3:1 mL/g. Under a modified conditions (ultrasonic power 400W, extraction time 25 min, liquid to solid ratio 20:1 mL/g, the experimental yield of polysaccharides was 11.19%, which was agreed closely with the predicted value (11.24%).

scholarly journals Separation of the main flavonoids and essential oil from seabuckthorn leaves by ultrasonic/microwave-assisted simultaneous distillation extraction

2018 ◽  
Vol 5 (7) ◽  
pp. 180133 ◽  
Author(s):  
Chunying Li ◽  
Jingjing Zhang ◽  
Chunjian Zhao ◽  
Lei Yang ◽  
Wenyan Zhao ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Extraction Time ◽  
Ultrasonic Power ◽  
Solid Ratio ◽  
Microwave Assisted ◽  
Assisted Extraction ◽  
Ultrasonic Assisted ◽  
Simultaneous Distillation Extraction ◽  
Ultrasonic Assisted Extraction ◽  
Optimized Conditions

Volatile essential oils (EOs), non-volatile rutin (RU), quercetin (QU), kaempferol (KA) and isorhamnetin (IS) were effectively extracted and isolated from seabuckthorn ( Hippophae rhamnoides L.) leaves by ionic liquid-based ultrasound/microwave-assisted simultaneous distillation extraction (ILUMASDE). After optimization by response surface methodology, EOs, RU, QU, KA and IS were separated under the following optimum conditions: an ionic liquid of 1.0 M 1-butyl-3-methyl imidazole bromine salt ([C4mim]), liquid/solid ratio of 12 ml g −1 , extraction time of 34 min, microwave power of 540 W and a fixed ultrasonic power of 50 W. Under the optimized conditions of ILUMASDE, the extraction yields of RU, QU, KA, IS and EOs were 9.18 ± 0.35, 5.52 ± 0.23, 3.03 ± 0.11, 5.64 ± 0.24 mg g −1 and 0.095 ± 0.004%, respectively. The yield of EOs obtained using ILUMASDE was 1.07-fold higher than that obtained by conventional hydrodistillation extraction (HDE). In addition, the components of the EOs obtained using ILUMASDE and HDE were similar. The extraction yields of RU, QU, KA, IS obtained by ILUMASDE were 1.03–1.35-fold higher than that obtained by the ethanol ultrasonic-assisted extraction (EUAE), ionic liquid-based ultrasonic-assisted extraction (ILUAE) and ionic liquid-based microwave-assisted extraction (ILMAE). And the extraction time used by ILUMASDE was 34 min, which is 14.17%, 56.67%, 56.67% and 85.00% less than those used by HDE, EUAE, ILUAE and ILMAE, respectively. Therefore, ILUMASDE can be considered a rapid and efficient method for extracting flavonoids and EO from seabuckthorn ( Hippophae rhamnoids L.) leaves.

Optimization of Ultrasonic-Assisted Extraction of Polysaccharides from Ottelia acuminata (Gagnep.) Dandy Using RSM

2011 ◽  
Vol 396-398 ◽  
pp. 292-296
Author(s):  
Ai Shi Zhu
Keyword(s):  
Processing Parameters ◽  
Extraction Time ◽  
Extraction Temperature ◽  
Independent Variables ◽  
Solid Ratio ◽  
Assisted Extraction ◽  
Ultrasonic Technology ◽  
Ultrasonic Assisted ◽  
Experimental Yield ◽  
Ultrasonic Assisted Extraction

Ultrasonic technology was applied to polysaccharides extraction from Ottelia acuminata (Gagnep.) Dandy and Response Surface Methodology (RSM) was used to optimize the effects of processing parameters on polysaccharides yields. Three independent variables such as liquid-solid ratio (ml/g, X1), extraction temperature (°C, X2) and extraction time (hour, X3) were investigated respectively. The statistical analysis indicated that the three variables and the quadratic of X1 and X3 had significant effects on the yields and followed by the significant interaction effects between the variables of X1 and X3, X2 and X3 (p<0.05). A mathematical model with high determination coefficient was gained. The optimal extraction conditions of polysaccharides were determined as follows: liquid-solid ratio 43 ml/g, extraction temperature 90 °C and extraction time 3.45 hours. Under these conditions, the experimental yield of polysaccharides was 107.44 mg/g, which was agreed closely with the predicted value 108.71 mg/g.

scholarly journals Optimization of ultrasonic-assisted extraction of inulin from Jerusalem artichoke

2019 ◽  
Vol 78 ◽  
pp. 02007
Author(s):  
Lina Yang ◽  
Hongyun Zhang ◽  
Jinghang Huang ◽  
Yafan Zhao ◽  
Danshi Zhu ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Jerusalem Artichoke ◽  
Hot Water ◽  
Ultrasonic Power ◽  
Hot Water Extraction ◽  
Box Behnken Design ◽  
Assisted Extraction ◽  
Ultrasonic Assisted ◽  
Ultrasonic Assisted Extraction

An efficient ultrasonic-assisted extraction of inulin from Jerusalem artichoke was investigated by Response Surface Methodology (RSM). The results showed that the yield of ultrasonic-assisted extraction was 62.07 ± 0.39% over the microwave (40.85 ± 0.28%) and hot water extraction (27.42 ± 0.42%). The Box-Behnken Design (BBD) was used to optimize the effects of three parameters (temperature-X1, ultrasonic power-X2 and time-X3) on inulin yield. Analysis of variance showed that the contributions of X1, X3, X12, X13, X22 were significant. The optimal yield of inulin was 82.93 ± 1.03% at 82 °, 120 W and 18 min.

ULTRASONIC-ASSISTED EXTRACTION OF OIL FROM CALOPHYLLUM INOPHYLLUM SEEDS: OPTIMIZATION OF PROCESS PARAMETERS

2016 ◽  
Vol 78 (10) ◽  
Author(s):  
Faiznur Mohd Fuad ◽  
Mashitah Mat Don
Keyword(s):  
Solvent Extraction ◽  
Extraction Time ◽  
Ultrasonic Power ◽  
Extraction Temperature ◽  
Calophyllum Inophyllum ◽  
Power Extraction ◽  
Optimization Of Process Parameters ◽  
Assisted Extraction ◽  
Ultrasonic Assisted ◽  
Ultrasonic Assisted Extraction

Calophyllum inophyllum (C. inophyllum) is a plant known as “Penaga Laut” in Malaysia. Its seeds contain valuable oil that serve as a potential alternative sources for vegetable oil. In this study, C. inophyllum seeds oil was extracted using an ultrasonic-assisted extraction (UAE) technique. The optimization of extraction parameters namely different types of solvent, extraction time, ultrasonic power, extraction temperature and liquid to solid (L/S) ratio were performed using one-factor-at-a-time (OFAT) method. The optimum extraction conditions obtained were n-hexane as a solvent, extraction time 20 min, ultrasonic power 210 W, extraction temperature 40°C and L/S ratio 20 ml/g, with an oil yield 55.44 ± 0.53 %.

Optimization of Ultrasonic-Assisted Extraction of Flavonoids from Moringa oleifera Leaves Using Response Surface Methodology

2021 ◽  
pp. 363-367
Author(s):  
Abdelhakim Benarima ◽  
Mohamed Nasreddine Raache ◽  
Moulay Rachid Kouadri ◽  
Yassine Belaiche ◽  
Salah Eddine Laouini
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Moringa Oleifera ◽  
Extraction Time ◽  
Extraction Temperature ◽  
Solid Ratio ◽  
Assisted Extraction ◽  
Ultrasonic Assisted ◽  
Moringa Oleifera Leaves ◽  
Ultrasonic Assisted Extraction

Moringa oleifera is considered one of the most useful plants in the world because it's rich in bioactive substances, which employing on modern medical treatment, also can be used for many fields: pharmaceutical, food and cosmetics purposes. In this study, the response surface methodology (RSM) based on a Box–Behnken design (BBD) was employed to optimize the extraction time (X1: 20–60 min), extraction temperature (X2: 15–45 °C) and solvent-solid ratio (X3: 5–7 ml/g), to obtain a high crude of flavonoids yield from Moringa oleifera Leaves by ultrasonic-assisted extraction technique (UAE). The optimum conditions were an extraction time 23 (min), extraction temperature 44 (°C) and solvent-solid ratio 5.05 (ml/g). Under these conditions, the experimental yield was 72.65 (mg ER/g), well matched with the predicted yield 74.34 (mg ER/g) with the coefficients of determination (R2= 0.9861), thus indicating the suitability of response surface methodology in optimizing the ultrasound-assisted extraction of flavonoids from Moringa oleifera Leaves.

scholarly journals Optimization of Ionic Liquid Based Simultaneous Ultrasonic- and Microwave-Assisted Extraction of Rutin and Quercetin from Leaves of Velvetleaf (Abutilon theophrasti) by Response Surface Methodology

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Chunjian Zhao ◽  
Zhicheng Lu ◽  
Chunying Li ◽  
Xin He ◽  
Zhao Li ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Extraction Time ◽  
Conventional Heating ◽  
Ultrasonic Power ◽  
Extraction Temperature ◽  
Microwave Assisted Extraction ◽  
Solid Ratio ◽  
Microwave Assisted ◽  
Assisted Extraction ◽  
Influential Parameters

An ionic liquids based simultaneous ultrasonic and microwave assisted extraction (ILs-UMAE) method has been proposed for the extraction of rutin (RU), quercetin (QU), from velvetleaf leaves. The influential parameters of the ILs-UMAE were optimized by the single factor and the central composite design (CCD) experiments. A 2.00 M 1-butyl-3-methylimidazolium bromide ([C4mim]Br) was used as the experimental ionic liquid, extraction temperature 60°C, extraction time 12 min, liquid-solid ratio 32 mL/g, microwave power of 534 W, and a fixed ultrasonic power of 50 W. Compared to conventional heating reflux extraction (HRE), the RU and QU extraction yields obtained by ILs-UMAE were, respectively, 5.49 mg/g and 0.27 mg/g, which increased, respectively, 2.01-fold and 2.34-fold with the recoveries that were in the range of 97.62–102.36% for RU and 97.33–102.21% for QU with RSDs lower than 3.2% under the optimized UMAE conditions. In addition, the shorter extraction time was used in ILs-UMAE, compared with HRE. Therefore, ILs-UMAE was a rapid and an efficient method for the extraction of RU and QU from the leaves of velvetleaf.

Optimization of Ultrasound-Assisted Extraction of Polysaccharides from the Chinese Medicinal Plant Rhodiola Sachalinensis A. BOR

2013 ◽  
Vol 448-453 ◽  
pp. 1085-1088
Author(s):  
Chuan Jun Zhang ◽  
Feng Lin Li
Keyword(s):  
Medicinal Plant ◽  
Extraction Time ◽  
Ultrasonic Power ◽  
Extraction Temperature ◽  
Ultrasound Assisted Extraction ◽  
Rhodiola Sachalinensis ◽  
Solid Ratio ◽  
Assisted Extraction ◽  
Ultrasound Assisted ◽  
Chinese Medicinal Plant

Ultrasound-assisted extraction (UAE) of polysaccharides from the Chinese medicinal plantRhodiola sachalinensisA. BOR (PRs) was studied. The effects of four factors (extraction time, ultrasonic power, liquid-solid ratio and extraction temperature) on the extraction yield of PRs were investigated by the single-factor test, and the optimum UAE conditions were investigated by the orthogonal test. The results demonstrated that the optimum UAE conditions for PRs were as followings: extraction time of 30 min, ultrasonic power of 85 W, liquid-solid ratio of 45 ml/g, and extraction temperature of 45°C. The present data might provide a theoretic base for full utilization ofRhodiola sachalinensisA. BOR.

Sign in / Sign up

Export Citation Format

Share Document