scholarly journals Wind Farm Power Production Assessment: Introduction of a New Actuator Disc Method and Comparison with Existing Models in the Context of a Case Study

2019 ◽  
Vol 9 (3) ◽  
pp. 431 ◽  
Author(s):  
Nikolaos Simisiroglou ◽  
Heracles Polatidis ◽  
Stefan Ivanell
Keyword(s):  
Wind Farm ◽  
Power Production ◽  
Offshore Wind ◽  
Offshore Wind Farm ◽  
Actuator Disc ◽  
Power Deficit ◽  
The Given ◽  
Method Show ◽  
Do So

The aim of the present study is to perform a comparative analysis of two actuator disc methods (ACD) and two analytical wake models for wind farm power production assessment. To do so, wind turbine power production data from the Lillgrund offshore wind farm in Sweden is used. The measured power production for individual wind turbines is compared with results from simulations, done in the WindSim software, using two ACD methods (ACD (2008) and ACD (2016)) and two analytical wake models widely used within the wind industry (Jensen and Larsen wake models). It was found that the ACD (2016) method and the Larsen model outperform the other method and model in most cases. Furthermore, results from the ACD (2016) method show a clear improvement in the estimated power production in comparison to the ACD (2008) method. The Jensen method seems to overestimate the power deficit for all cases. The ACD (2016) method, despite its simplicity, can capture the power production within the given error margin although it tends to underestimate the power deficit.

scholarly journals Wind farm power production assessment: a comparative analysis of two actuator disc methods and two analytical wake models

2018 ◽  
Author(s):  
Nikolaos Simisiroglou ◽  
Heracles Polatidis ◽  
Stefan Ivanell
Keyword(s):  
Comparative Analysis ◽  
Wind Farm ◽  
Power Production ◽  
Offshore Wind ◽  
Offshore Wind Farm ◽  
Actuator Disc ◽  
Power Deficit ◽  
The Given ◽  
Method Show ◽  
Do So

Abstract. The aim of the present study is to perform a comparative analysis of two actuator disc methods (ACD) and two analytical wake models for wind farm power production assessment. To do so wind turbine power production data from the Lillgrund offshore wind farm in Sweden is used. The measured power production for individual wind turbines is compared with results from simulations, done in the WindSim software, using two ACD methods (old and new) and two analytical wake models widely used within the wind industry (Jensen and Larsen wake models). It was found that the new ACD method and the Larsen model outperform the other method and model in most cases. Furthermore, results from the new ACD method show a clear improvement in the estimated power production in comparison to the old ACD method. The Jensen method seems to overestimate the power deficit for all cases. The new ACD method, despite it's simplicity, is capable of capturing the power production within the given error margin although it tends to underestimate the power deficit.

Performance Analysis of Offshore Mono-Pile Wind Turbine Co-Located With Floating Photovoltaic Systems in Shark Bay, Australia

2021 ◽  
Author(s):  
Morteza Bahadori ◽  
Hassan Ghassemi
Keyword(s):  
Wind Turbine ◽  
Hybrid System ◽  
Wind Farm ◽  
Wind Farms ◽  
Power Production ◽  
Offshore Wind ◽  
Offshore Wind Farm ◽  
Offshore Wind Farms ◽  
Shark Bay

Abstract In recent years, as more offshore wind farms have been constructed, the possibility of integrating various offshore renewable technologies is increased. Using offshore wind and solar power resources as a hybrid system provides several advantages including optimized marine space utilization, reduced maintenance and operation costs, and relieving wind variability on output power. In this research, both offshore wind and solar resources are analyzed based on accurate data through a case study in Shark Bay (Australia), where bathymetric information confirms using offshore bottom-fixed wind turbine regarding the depth of water. Also, the power production of the hybrid system of co-located bottom-fixed wind turbine and floating photovoltaic are investigated with the technical characteristics of commercial mono-pile wind turbine and photovoltaic panels. Despite the offshore wind, the solar energy output has negligible variation across the case study area, therefore using the solar platform in deep water is not an efficient option. It is demonstrated that the floating solar has a power production rate nearly six times more than a typical offshore wind farm with the same occupied area. Also, output energy and surface power density of the hybrid offshore windsolar system are improved significantly compared to a standalone offshore wind farm. The benefits of offshore wind and solar synergies augment the efficiency of current offshore wind farms throughout the world.

Impact of ocean waves on offshore wind farm power production

2021 ◽  
Author(s):  
Porchetta Sara ◽  
Muñoz-Esparza Domingo ◽  
Munters Wim ◽  
van Beeck Jeroen ◽  
van Lipzig Nicole
Keyword(s):  
Wind Farm ◽  
Power Production ◽  
Ocean Waves ◽  
Offshore Wind ◽  
Offshore Wind Farm

Towards a Population-based SHM: A Case Study on an Offshore Wind Farm

2015 ◽  
Author(s):  
EVANGELOS PAPATHEOU ◽  
NIKOLAOS DERVILIS ◽  
EOGHAN MAGUIRE ◽  
IFIGENEIA ANTONIADOU ◽  
KEITH WORDEN
Keyword(s):  
Wind Farm ◽  
Population Based ◽  
Offshore Wind ◽  
Offshore Wind Farm

Optimization of Floating Offshore Wind Energy Systems Using an Extended Pattern Search Method

2016 ◽  
Author(s):  
Caitlin Forinash ◽  
Bryony DuPont
Keyword(s):  
Wind Farm ◽  
Wind Farms ◽  
Power Production ◽  
Pattern Search ◽  
Offshore Wind ◽  
Offshore Wind Farm ◽  
Power Development ◽  
Offshore Wind Farms ◽  
Onshore Wind ◽  
Extended Pattern Search

An Extended Pattern Search (EPS) approach is developed for offshore floating wind farm layout optimization while considering challenges such as high cost and harsh ocean environments. This multi-level optimization method minimizes the costs of installation and operations and maintenance, and maximizes power development in a unidirectional wind case by selecting the size and position of turbines. The EPS combines a deterministic pattern search algorithm with three stochastic extensions to avoid local optima. The EPS has been successfully applied to onshore wind farm optimization and enables the inclusion of advanced modeling as new technologies for floating offshore wind farms emerge. Three advanced models are incorporated into this work: (1) a cost model developed specifically for this work, (2) a power development model that selects hub height and rotor radius to optimize power production, and (3) a wake propagation and interaction model that determines aerodynamic effects. Preliminary results indicate the differences between proposed optimal offshore wind farm layouts and those developed by similar methods for onshore wind farms. The objective of this work is to maximize profit; given similar parameters, offshore wind farms are suggested to have approximately 24% more turbines than onshore farms of the same area. EPS layouts are also compared to those of an Adapted GA; 100% efficiency is found for layouts containing twice as many turbines as the layout presented by the Adapted GA. Best practices are derived that can be employed by offshore wind farm developers to improve the layout of platforms, and may contribute to reducing barriers to implementation, enabling developers and policy makers to have a clearer understanding of the resulting cost and power production of computationally optimized farms; however, the unidirectional wind case used in this work limits the representation of optimized layouts at real wind sites. Since there are currently no multi-turbine floating offshore wind farm projects operational in the United States, it is anticipated that this work will be used by developers when planning array layouts for future offshore floating wind farms.

Sign in / Sign up

Export Citation Format

Share Document