scholarly journals Treatment of Wastewater Solutions from Anodizing Industry by Membrane Distillation and Membrane Crystallization

2019 ◽  
Vol 9 (2) ◽  
pp. 287 ◽  
Author(s):  
Aamer Ali ◽  
Josephine Hvid Jacobsen ◽  
Henriette Casper Jensen ◽  
Morten Lykkegaard Christensen ◽  
Cejna Quist-Jensen
Keyword(s):  
Sodium Sulfate ◽  
Inductively Coupled Plasma ◽  
Cross Flow ◽  
Membrane Distillation ◽  
Inlet Temperature ◽  
Feed Tank ◽  
X Ray ◽  
Inductively Coupled ◽  
Specific Amount ◽  
Feed Inlet

The treatment of wastewater containing various metal ions is a challenging issue in the anodizing industry. The current study investigates the application of membrane distillation/crystallization (MD/MCr) for the simultaneous recovery of freshwater and sodium sulfate from wastewater originating from a Danish anodizing industry. MD/MCr experiments were performed on supernatant from wastewater obtained after centrifugation. The effect of various feed temperatures and cross-flow velocities on flux and crystal characteristics was investigated. The crystal growth in the feed tank was monitored through the use of an online PaticleView microscope. The crystals’ morphology and form were determined by using scanning electron microscope (SEM) and X-ray powder diffraction (XRD), respectively, while inductively coupled plasma (ICP) was applied to determine the purity of the obtained crystals. The weight and dimensions of the MD/MCr unit that were required to treat the specific amount of wastewater were evaluated as a function of the feed inlet temperature. It was demonstrated that the application of MCr allows extracting high-purity sodium sulfate crystals and more than 80% freshwater from the wastewater.

Numerical Simulation of Cross-Flow Vacuum Membrane Distillation and Characteristics Analysis

2011 ◽  
Vol 396-398 ◽  
pp. 1846-1850
Author(s):  
Chang Li ◽  
Bao An Li ◽  
Shi Chang Wang
Keyword(s):  
Numerical Simulation ◽  
Cross Flow ◽  
Membrane Distillation ◽  
Inlet Temperature ◽  
Coefficient Distribution ◽  
Vacuum Degree ◽  
Membrane Flux ◽  
Characteristics Analysis ◽  
Vacuum Membrane Distillation ◽  
Feed Inlet

The mechanism of cross-flow vacuum membrane distillation (VMD) was discussed in this paper, and the coupled process of heat and mass transfer in numerical simulation was realized by writing user defined function (UDF). The numerical simulation results of membrane flux were well agree with experimental data. The membrane flux in various conditions of feed velocity, feed inlet temperature and vacuum degree was obtained in numerical simulation. Around the cross-section of a single hollow fiber, velocity distribution was approximately symmetrical; TPC and heat transfer coefficient distribution are consistent.

Sorption of Se (IV) from aqueous solutions with subsequent determination by X-ray fluorescence analysis

2020 ◽  
Vol 86 (10) ◽  
pp. 5-9
Author(s):  
D. G. Filatova ◽  
A. A. Arkhipenko ◽  
M. A. Statkus ◽  
V. V. Es’kina ◽  
V. B. Baranovskaya ◽  
...  
Keyword(s):  
Inductively Coupled Plasma ◽  
Fluorescence Analysis ◽  
Standard Samples ◽  
Phase Contact Time ◽  
Sorbent Phase ◽  
X Ray ◽  
Fundamental Parameters ◽  
Inductively Coupled ◽  
Subsequent Determination

An approach to sorptive separation of Se (IV) from solutions on a novel S,N-containing sorbent with subsequent determination of the analyte in the sorbent phase by micro-x-ray fluorescence method is presented. The sorbent copolymethylenesulfide-N-alkyl-methylenamine (CMA) was synthesized using «snake in the cage» procedure and proven to be stable in acid solutions. Conditions for quantitative extraction of Se (IV) were determined: sorption in 5 M HCl or 0.05 M HNO3 solutions when heated to 60°C, phase contact time being 1 h. The residual selenium content in the solution was determined by inductively coupled plasma mass spectrometry (ICP-MS) using 82Se isotope. The absence of selenium losses is proved and the mechanism of sorption interaction under specified conditions is proposed. The method of micro-x-ray fluorescence analysis (micro-RFA) with mapping revealed a uniform distribution of selenium on the sorbent surface. The possibility of determining selenium in the sorbent phase by micro-RFA is shown. When comparing the obtained results with the results of calculations by the method of fundamental parameters, it is shown the necessity of using standard samples of sorbates to obtain correct results of RFA determination of selenium in the sorbent phase.

scholarly journals Distribution and Mode of Occurrence of Co, Ni, Cu, Zn, As, Ag, Cd, Sb, Pb in the Feed Coal, Fly Ash, Slag, in the Topsoil and in the Roots of Trees and Undergrowth Downwind of Three Power Stations in Poland

Minerals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 133
Author(s):  
Henryk R. Parzentny ◽  
Leokadia Róg
Keyword(s):  
Inductively Coupled Plasma ◽  
Coal Fly Ash ◽  
Atomic Emission ◽  
Emission Spectrometry ◽  
Plasma Atomic Emission Spectrometry ◽  
X Ray ◽  
Inductively Coupled ◽  
Power Stations ◽  
Mode Of Occurrence ◽  
Feed Coal

It is supposed that the determination of the content and the mode of occurrence of ecotoxic elements (EE) in feed coal play the most significant role in forecasting distribution of EE in the soil and plants in the vicinity of power stations. Hence, the aim of the work was to analyze the properties of the feed coal, the combustion residues, and the topsoil which are reached by EE together with dust from power stations. The mineral and organic phases, which are the main hosts of EE, were identified by microscopy, X-ray powder diffraction, inductively coupled plasma atomic emission spectrometry, and scanning electron microscope with an energy dispersive X-ray methods. The highest content of elements was observed in the Oi and Oe subhorizons of the topsoil. Their hosts are various types of microspheres and char, emitted by power stations. In the areas of long-term industrial activity, there are also sharp-edged grains of magnetite emitted in the past by zinc, lead, and ironworks. The enrichment of the topsoil with these elements resulted in the increase in the content of EE, by between 0.2 times for Co; and 41.0 times for Cd in the roots of Scots pine, common oak and undergrowth, especially in the rhizodermis and the primary cortex and, more seldom, in the axle roller and cortex cells.

scholarly journals Arsenoplatin-Ferritin Nanocage: Structure and Cytotoxicity

2021 ◽  
Vol 22 (4) ◽  
pp. 1874
Author(s):  
Giarita Ferraro ◽  
Alessandro Pratesi ◽  
Damiano Cirri ◽  
Paola Imbimbo ◽  
Daria Maria Monti ◽  
...  
Keyword(s):  
Biological Activity ◽  
Diffraction Data ◽  
Inductively Coupled Plasma ◽  
Emission Spectroscopy ◽  
Atomic Emission ◽  
Side Chain ◽  
Plasma Atomic Emission ◽  
Average Amount ◽  
X Ray ◽  
Inductively Coupled

Arsenoplatin-1 (AP-1), the prototype of a novel class of metallodrugs containing a PtAs(OH)2 core, was encapsulated within the apoferritin (AFt) nanocage. UV-Vis absorption spectroscopy and inductively coupled plasma-atomic emission spectroscopy measurements confirmed metallodrug encapsulation and allowed us to determine the average amount of AP-1 trapped inside the cage. The X-ray structure of AP-1-encapsulated AFt was solved at 1.50 Å. Diffraction data revealed that an AP-1 fragment coordinates the side chain of a His residue. The biological activity of AP-1-loaded AFt was comparatively tested on a few representative cancer and non-cancer cell lines. Even though the presence of the cage reduces the overall cytotoxicity of AP-1, it improves its selectivity towards cancer cells.

scholarly journals Geophagic Clays from Cameroon: Provenance, Metal Contamination and Health Risk Assessment

2021 ◽  
Vol 18 (16) ◽  
pp. 8315
Author(s):  
Georges-Ivo Ekosse ◽  
George Elambo Nkeng ◽  
Nenita Bukalo ◽  
Olaonipekun Oyebanjo
Keyword(s):  
Health Risk ◽  
Inductively Coupled Plasma ◽  
Risk Index ◽  
Human Health Risk ◽  
Carcinogenic Risk ◽  
Anthropogenic Sources ◽  
Contamination Assessment ◽  
X Ray ◽  
Inductively Coupled ◽  
Plasma Mass Spectrometry

This study assessed the mineralogical and geochemical characteristics of geophagic clays sold in some markets in Cameroon to ascertain their provenance, contamination status and human health risk. To achieve this, 40 samples from 13 markets in Cameroon were purchased and analysed using X-ray diffractometry, X-ray fluorescence and laser ablation inductively coupled plasma mass spectrometry for their mineralogy and geochemistry, respectively. The geophagic clays were dominantly made up of kaolinite and quartz. Their chemistry was dominated by SiO2, Al2O3 and LOI with means of 48.76 wt%, 32.12 wt% and 13.93 wt%, respectively. The major, trace and rare earth elements data showed that these geophagic clays were predominantly derived from felsic rocks. The contamination assessment indicated no enrichment of metals from anthropogenic sources, except for Zn in samples from Acacia, Madagascar and Mfoudi markets. The index of geo-accumulation indicated no contamination to moderate contamination of the clays. The non-carcinogenic index values for Fe, Co, Cr, Cu, Ni, Pb and Zn were generally less than 1, suggesting no non-carcinogenic risk exposure to children and adults consuming the geophagic clays from these metals. The carcinogenic risk index (TCR) for Ni and Cr were above 10−6, which implies that children and adults are vulnerable to minimal carcinogenic health risk. The TCR values from Ni posed the highest risk, especially to children consuming clays from some markets.

The Characteristic Evaluation of Hydroxyapatite Powders Synthesized from CaCO3 Refined from Oyster Shell and H3PO4

2006 ◽  
Vol 118 ◽  
pp. 639-644
Author(s):  
Hye Sung Kim ◽  
Su Chak Ryu
Keyword(s):  
Bone Density ◽  
Inductively Coupled Plasma ◽  
Oyster Shell ◽  
Atomic Emission ◽  
Xrd Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Inductively Coupled ◽  
Infra Red ◽  
Ft Ir

Hydroxyapatite (Ca10(PO4)6(OH)2, HAp) powders is synthesized using the mixed powders of CaCO3 refined from oyster shells and phosphoric acid (H3PO4-98%, Daejung) as starting materials. The characteristic evaluation and chemical analysis of the synthesized powders is performed by X-ray diffraction (XRD), Fourier-transformed infra-red spectroscopy (FT-IR), and inductively-coupled plasma atomic emission spectroscopy (ICPAES). XRD analysis of synthetic powder by heat treatment at 1300°C for 2hrs shows only HAp peaks corresponding to stoichiometric HAp. It is confirmed by ICP-AES test that impurities such as Zn, In, Ti, Ba, Cd, Pb, and Mn, is not detected at all, but small amounts of Ti and Be is observed (0.099ppm Ti and 0.002ppm Ba). Variation of bone density is measured by giving medication of HAp powder with drinking water into human body continuously for three month. After the medication, the bone density is higher than the medication before. This means that HAp powder made from this process can be used as improver of bone density.

scholarly journals Using SEM-EDX and ICP-OES to Investigate the Elemental Composition of Green MacroalgaVaucheria sessilis

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Izabela Michalak ◽  
Krzysztof Marycz ◽  
Katarzyna Basińska ◽  
Katarzyna Chojnacka
Keyword(s):  
Elemental Composition ◽  
Cross Section ◽  
Inductively Coupled Plasma ◽  
Algal Biomass ◽  
Optical Emission Spectroscopy ◽  
Optical Emission ◽  
Icp Oes ◽  
X Ray ◽  
Inductively Coupled ◽  
Analytical System

The biomass ofVaucheria sessilisforms algal mats in many freshwaters. There is a need to find the method of algal biomass utilization.Vaucheria sessilisis a rich source of micro- and macronutrients and can be used as a soil amendment. In the paper, the elemental composition of enriched, via bioaccumulation process, macroalga was investigated. For this purpose, two independent techniques were used: scanning electron microscopy with an energy dispersive X-ray analytical system (SEMEDX) and inductively coupled plasma optical emission spectroscopy (ICP-OES). The biomass was exposed to two microelemental solutions, with Cu(II) and Zn(II) ions. After two weeks of the experiment, macroalga accumulated 98.5 mg of Zn(II) ions in 1 g of dry biomass and 68.9 mg g−1of Cu(II) ions. Micrographs performed by SEM proved that bioaccumulation occurred. Metal ions were bound on the surface and in the interior of cells. Mappings of all cations showed that in the case of the surface of biomass (biosorption), the elements constituted aggregations and in the case of the cross section (bioaccumulation) they were evenly distributed. The algal biomass with permanently bound microelements can find an application in many branches of the industry (feed, natural fertilizers, etc.).

scholarly journals Characterization of Fly Ash Generated from Matla Power Station in Mpumalanga, South Africa

2012 ◽  
Vol 9 (4) ◽  
pp. 1788-1795 ◽  
Author(s):  
Olushola S. Ayanda ◽  
Olalekan S. Fatoki ◽  
Folahan A. Adekola ◽  
Bhekumusa J. Ximba
Keyword(s):  
Fly Ash ◽  
Inductively Coupled Plasma ◽  
Coal Fly Ash ◽  
Harmful Effect ◽  
Point Of Zero Charge ◽  
X Ray Diffraction ◽  
Power Station ◽  
X Ray ◽  
Inductively Coupled ◽  
Plasma Mass Spectrometry

In this study, fly ash was obtained from Matla power station and the physicochemical properties investigated. The fly ash was characterized by x-ray fluorescence, x-ray diffraction, scanning electron microscopy, and inductively coupled plasma mass spectrometry. Surface area, particle size, ash and carbon contents, pH, and point of zero charge were also measured. The results showed that the fly ash is alkaline and consists mainly of mullite (Al6Si2O13) and quartz (SiO2). Highly toxic metals As, Sb, Cd, Cr, and Pb as well as metals that are essential to health in trace amounts were also present. The storage and disposal of coal fly ash can thus lead to the release of leached metals into soils, surface and ground waters, find way into the ecological systems and then cause harmful effect to man and its environments.

Sign in / Sign up

Export Citation Format

Share Document