scholarly journals Development of an Efficient Numerical Method for Wind Turbine Flow, Sound Generation, and Propagation under Multi-Wake Conditions

2018 ◽  
Vol 9 (1) ◽  
pp. 100 ◽  
Author(s):  
Zhenye Sun ◽  
Wei Zhu ◽  
Wen Shen ◽  
Emre Barlas ◽  
Jens Sørensen ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Numerical Method ◽  
Wind Turbines ◽  
Noise Source ◽  
Axisymmetric Flow ◽  
Wake Flow ◽  
Propagation Path ◽  
Aerodynamic Noise ◽  
Long Distance ◽  
Noise Propagation

The propagation of aerodynamic noise from multi-wind turbines is studied. An efficient hybrid method is developed to jointly predict the aerodynamic and aeroacoustics performances of wind turbines, such as blade loading, rotor power, rotor aerodynamic noise sources, and propagation of noise. This numerical method combined the simulations of wind turbine flow, noise source and its propagation which is solved for long propagation path and under complex flow environment. The results from computational fluid dynamics (CFD) calculations not only provide wind turbine power and thrust information, but also provide detailed wake flow. The wake flow is computed with a 2D actuator disc (AD) method that is based on the axisymmetric flow assumption. The relative inflow velocity and angle of attack (AOA) of each blade element form input data to the noise source model. The noise source is also the initial condition for the wave equation that solves long distance noise propagation in frequency domain. Simulations were conducted under different atmospheric conditions which showed that wake flow is an important part that has to be included in wind turbine noise propagation.

Effect of Flow Inclination on Wind Turbine Performance

2012 ◽  
Vol 134 (12) ◽  
Author(s):  
Christina Tsalicoglou ◽  
Sarah Barber ◽  
Ndaona Chokani ◽  
Reza S. Abhari
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Complex Terrain ◽  
Wake Flow ◽  
Test Facility ◽  
Power Coefficient ◽  
Incoming Flow ◽  
Turbine Performance ◽  
The Impact ◽  
Blade Element

This work examines the effect of flow inclination on the performance of a stand-alone wind turbine and of wind turbines operating in the wakes of upstream turbines. The experimental portion of this work, which includes performance and flowfield measurements, is conducted in the ETH dynamically-scaled wind turbine test facility, with a wind turbine model that can be inclined relative to the incoming flow. The performance of the wind turbine is measured with an in-line torquemeter, and a 5-hole steady-state probe is used to detail the inflow and wake flow of the turbine. Measurements show that over a range of tip-speed ratios of 4–7.5, the power coefficient of a wind turbine with an incoming flow of 15 deg inclination decreases on average by 7% relative to the power coefficient of a wind turbine with a noninclined incoming flow. Flowfield measurements show that the wake of a turbine with an inclined incoming flow is deflected; the deflection angle is approximately 6 deg for an incoming flow with 15 deg inclination. The measured wake profiles are used as inflow profiles for a blade element momentum code in order to quantify the impact of flow inclination on the performance of downstream wind turbines. In comparison to the case without inclination in the incoming flow, the combined power output of two aligned turbines with incoming inclined flow decreases by 1%, showing that flow inclination in complex terrain does not significantly reduce the energy production.

Prediction of Aerodynamic Noise Radiated From a Vertical-Axis Wind Turbine

2003 ◽  
Author(s):  
Akiyoshi Iida ◽  
Akisato Mizuno ◽  
Kyoji Kamemoto
Keyword(s):  
Flow Field ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Sound Source ◽  
Vertical Axis ◽  
Aerodynamic Performance ◽  
Low Noise ◽  
Aerodynamic Noise ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine

Unsteady flow field and flow induced noise of vertical axis wind turbine are numerically investigated. The flow field is numerically calculated by the vortex method with core-spreading model. This simulation obtains aerodynamic performance and aerodynamic forces. Aerodynamic noise is also simulated by using Ffowcs Williams-Hawkings equation with compact body and low-Mach number assumptions. Tip speed of rotor blades are not so high, then the contribution of the moving sound source is smaller than that of the dipole sound source. Since the maximum power coefficient of VAWT can be obtained at lower tip-speed ratio compared to the conventional, horizontal axis wind turbines, the aerodynamic noise from vertical axis wind turbine is smaller than that of the conventional wind turbines at the same aerodynamic performance. This result indicates that the vertical axis wind turbines are useful to develop low-noise wind turbines.

Yawed Effect on Wind Turbine Near Wake

2014 ◽  
Author(s):  
Yuntian Ge ◽  
Xiuling Wang
Keyword(s):  
Wind Turbine ◽  
Flow Pattern ◽  
Wind Turbines ◽  
Air Flow ◽  
Aerodynamic Performance ◽  
Wake Flow ◽  
Near Wake ◽  
Rotation Plane ◽  
The Difference ◽  
Ansys Workbench

Wind turbines rotation was motivated by the force of wind. In reality, wind doesn’t moving vertically to the wind turbine rotation plane, but in random directions instead. Therefore, the yawed effect has to be taken into consideration when study wind turbine aerodynamic performance. The purpose of this study is to compare the difference between the wind turbine near wake flow with yawed effect and without yawed effect aerodynamically. The research uses CFD technology to simulate the rotation movement and air flow pattern, which is completed in software Ansys Workbench.

Assessment of the noise produced by wind farms with the acoustically analogous techniques without stopping the noise source

2018 ◽  
Vol 43 (2) ◽  
pp. 201-209
Author(s):  
Gino Iannace ◽  
Amelia Trematerra ◽  
Umberto Berardi
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Noise Source ◽  
Sound Field ◽  
Wind Farms ◽  
Sound Level ◽  
Acoustic Measurements ◽  
Relative Contribution

In Italy, wind turbines with a nominal power below 1 MW can be installed following simplified authorization procedures and are therefore becoming the preferred choice for promoters. The assessment of the noise of wind farms is not easy, due to economic reasons, with it being difficult to stop and assess the relative contribution of each wind turbine. Several acoustic measurements were taken inside homes located near a wind farm consisting of three wind turbines, each with a nominal power of 1 MW. The acoustic measurements were taken by placing sound level meters inside the houses at different wind speed values and wind directions. The acoustic measurements were taken using the acoustically analogous place technique. For economic reasons, the plant cannot be switched off. In this case, the sound field generated by the operation of the wind turbines was measured by placing two sound level meters in a house.

Experimental Investigation on the Wake Characteristics and Aeromechanics of Dual-Rotor Wind Turbines

2015 ◽  
Vol 138 (4) ◽  
Author(s):  
Ahmet Ozbay ◽  
Wei Tian ◽  
Hui Hu
Keyword(s):  
Boundary Layer ◽  
Atmospheric Boundary Layer ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Large Scale ◽  
Flow Characteristics ◽  
Wake Flow ◽  
Neutral Stability ◽  
Flow Measurements ◽  
Wake Characteristics

An experimental study was carried out to investigate the aeromechanics and wake characteristics of dual-rotor wind turbines (DRWTs) in either co-rotating or counter-rotating configuration, in comparison to those of a conventional single-rotor wind turbine (SRWT). The experiments were performed in a large-scale aerodynamic/atmospheric boundary layer (AABL) wind tunnel, available at Iowa State University with the oncoming atmospheric boundary-layer (ABL) airflows under neutral stability conditions. In addition to measuring the power output performance of DRWT and SRWT models, static and dynamic wind loads acting on those turbine models were also investigated. Furthermore, a high-resolution digital particle image velocimetry (PIV) system was used to quantify the flow characteristics in the near wakes of the DRWT and SRWT models. The detailed wake-flow measurements were correlated with the power outputs and wind-load measurement results of the wind-turbine models to elucidate the underlying physics to explore/optimize design of wind turbines for higher power yield and better durability.

A Comparative Study of the Wind Loads and Wake Characteristics of a Single-Rotor Wind Turbine and Dual-Rotor Wind Turbines

2014 ◽  
Author(s):  
Ahmet Ozbay ◽  
Wei Tian ◽  
Hui Hu
Keyword(s):  
Turbulent Flow ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Large Scale ◽  
Wind Farm ◽  
Wake Flow ◽  
Wind Loads ◽  
Neutral Stability ◽  
Near Wake ◽  
Wake Characteristics

An experimental study was carried out to investigate the aeromechanics and wake characteristics of dual-rotor wind turbines (DRWTs) with co- and counter-rotating configurations, in comparison to those of a conventional singlerotor wind turbine (SRWT), in order to elucidate the underlying physics to explore/optimize design of wind turbines for higher power yield and better durability. The experiments were performed in a large-scale Aerodynamic/Atmospheric Boundary Layer (AABL) wind tunnel under neutral stability conditions. In addition to measuring the power output performance of DRWT and SRWT systems, static and dynamic wind loads acting on those systems were also investigated. Furthermore, a high resolution PIV system was used for detailed near wake flow field measurements (free-run and phase-locked) so as to quantify the near wake turbulent flow structures and observe the transient behavior of the unsteady vortex structures in the wake of DRWT and SRWT systems. In the light of the promising experimental results on DRWTs, this study can be extended further to investigate the turbulent flow in the far wake of DRWTs and utilize multiple DRWTs in different wind farm operations.

An Experimental Investigation on the Wake Characteristics and Aeromechanics of Dual-Rotor Wind Turbines

2015 ◽  
Author(s):  
Ahmet Ozbay ◽  
Wei Tian ◽  
Hui Hu
Keyword(s):  
Boundary Layer ◽  
Atmospheric Boundary Layer ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Large Scale ◽  
Flow Characteristics ◽  
Wake Flow ◽  
Neutral Stability ◽  
Flow Measurements ◽  
Wake Characteristics

An experimental study was carried out to investigate the aeromechanics and wake characteristics of dual-rotor wind turbines (DRWTs ) in either co-rotating or counter-rotating configuration, in comparison to those of a conventional single-rotor wind turbine (SRWT). The experiments were performed in a large-scale Aerodynamic/Atmospheric Boundary Layer (AABL) wind tunnel available at Iowa State University with the oncoming Atmospheric Boundary Layer (ABL) airflows under neutral stability conditions. In addition to measuring the power output performance of DRWT and SRWT models, static and dynamic wind loads acting on those turbine models were also investigated. Furthermore, a high resolution digital particle image velocimetry (PIV) system was used to quantify the flow characteristics in the near wakes of the DRWT and SRWT models. The detailed wake flow measurements were correlated with the power outputs and wind load measurement results of the wind turbine models to elucidate the underlying physics to explore/optimize design of wind turbines for higher power yield and better durability.

Modeling of Aerodynamically Generated Noise From Wind Turbines

2005 ◽  
Vol 127 (4) ◽  
pp. 517-528 ◽  
Author(s):  
Wei Jun Zhu ◽  
Nicolai Heilskov ◽  
Wen Zhong Shen ◽  
Jens Nørkær Sørensen
Keyword(s):  
Boundary Layer ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Aerodynamic Noise ◽  
Generation Model ◽  
Two Dimensional ◽  
Noise Emission ◽  
Total Noise ◽  
Element Input ◽  
Blade Element

A semiempirical acoustic generation model based on the work of Brooks, Pope, and Marcolini [NASA Reference Publication 1218 (1989)] has been developed to predict aerodynamic noise from wind turbines. The model consists of dividing the blades of the wind turbine into two-dimensional airfoil sections and predicting the total noise emission as the sum of the contribution from each blade element. Input is the local relative velocities and boundary layer parameters. These quantities are obtained by combining the model with a Blade Element Momentum (BEM) technique to predict local inflow characteristics to the blades. Boundary layer characteristics are determined from two-dimensional computations of airfoils. The model is applied to the Bonus 300 kW wind turbine at a wind speed of 8 m/s. Comparisons of total noise spectra show good agreement with experimental data.

Sign in / Sign up

Export Citation Format

Share Document