scholarly journals Temperature-Dependent Raman Scattering of Large Size Hexagonal Bi2Se3 Single-Crystal Nanoplates

2018 ◽  
Vol 8 (10) ◽  
pp. 1794 ◽  
Author(s):  
Fang Zhou ◽  
Yujing Zhao ◽  
Weichang Zhou ◽  
Dongsheng Tang
Keyword(s):  
Electron Microscope ◽  
Single Crystal ◽  
Temperature Coefficient ◽  
Thermoelectric Materials ◽  
Large Scale ◽  
X Ray Diffraction ◽  
Temperature Dependent ◽  
Large Size ◽  
Transmission Electron ◽  
High Figure

Bi 2 Se 3 has extensive application as thermoelectric materials. Here, large-scale Bi 2 Se 3 single-crystal hexagonal nanoplates with size 7.50–10.0 μ m were synthesized successfully by hydrothermal method. X-ray diffraction (XRD), scanning electron microscope (SEM), and transmission electron microscope (TEM) were used to characterize the Bi 2 Se 3 nanoplates, which confirm the single-crystal quality and smooth surface morphology with large size. Micro-Raman spectra over a temperature range of 83–603 K were furthermore used to investigate the lattice dynamics of Bi 2 Se 3 nanoplates. Both 2A g 1 and 1E g 2 modes shift evidently with reduced temperature. The line shape demonstrates a significant broadening of full width at half maximum (FWHM) and red-shift of frequency with increased temperature. The temperature coefficient of A 1 g 1 , E g 2 , A 1 g 2 modes were determined to be −1.258 × 10 − 2 cm − 1 /K, −1.385 × 10 − 2 cm − 1 /K, −2.363 × 10 − 2 cm − 1 /K, respectively. Such low temperature coefficient may favor the obtaining of a high figure of merit (ZT) and indicate that Bi 2 Se 3 nanoplates were used as excellent candidates of thermoelectric materials.

Single-Crystal Iron Nanowire Arrays

2007 ◽  
Vol 121-123 ◽  
pp. 17-20 ◽  
Author(s):  
Yue Ling Sun ◽  
Ying Dai ◽  
L.Q. Zhou ◽  
Wen Chen
Keyword(s):  
Electron Microscope ◽  
Single Crystal ◽  
Hysteresis Loops ◽  
Nanowire Arrays ◽  
X Ray Diffraction ◽  
Easy Magnetization ◽  
Transmission Electron ◽  
Iron Nanowires ◽  
Xrd Patterns ◽  
Different Diameters

Highly ordered single-crystal iron nanowire arrays with different diameters have been fabricated in anodic aluminum oxide (AAO) templates by DC electrodeposition method. The Scanning Electron Microscope (SEM) and Transmission Electron Microscope (TEM) show that the iron nanowires are highly uniform and exhibit a single crystal structure. The X-ray diffraction (XRD) patterns of iron nanowire arrays indicate that most of the iron nanowire arrays have the obvious preferred orientation along the [200] direction. From the hysteresis loops of the iron nanowires, it reveals that the easy magnetization axes of nanowire arrays are along the long axis. The sample with smaller diameter (d=35nm) has a high square ratio (up to 98%) and a high coercive filed (1265Oe) when the external magnetic field is applied along axis of the nanowires. When the diameter decreases, the square ratio and the coercive field increase due to the single-domain structure and the strong shape anisotropy in the smaller diameter nanowire arrays.

Preparation of Single-Crystal BiOCl Nanorods via Surfactant Soft-Template Inducing Growth

2005 ◽  
Vol 23 ◽  
pp. 79-82 ◽  
Author(s):  
Chuan Bao Cao ◽  
Ruitao Lv ◽  
He Sun Zhu
Keyword(s):  
Electron Microscope ◽  
Single Crystal ◽  
Saed Pattern ◽  
Soft Template ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Triton X

Nanorods of a compound semiconductor, BiOCl, have been prepared from BiCl3 solutions containing a nonionic surfactant, t-octyl-(OCH2CH2)xOH, x=9, 10 (Triton X-100). Powder X-ray diffraction (XRD) pattern indicated that the product was pure tetragonal phase bismoclite (BiOCl). The product was also characterized by the techniques of scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS) and transmission electron microscope (TEM). The as-obtained BiOCl nanorods possess mean diameters less than 40nm and lengths ranging in 160-400nm. Selected area electron diffraction (SAED) pattern showed the single-crystal nature of as-prepared BiOCl nanorods. The growth mechanism of BiOCl nanorods has also been proposed.

scholarly journals Facile Synthesis of Template-Induced SnO2Nanotubes

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Yang Liu ◽  
Yang Jiao ◽  
Fengyu Qu ◽  
Lihong Gong ◽  
Xiang Wu
Keyword(s):  
Electron Microscope ◽  
Large Scale ◽  
Average Diameter ◽  
X Ray Diffraction ◽  
Facile Hydrothermal Method ◽  
X Ray ◽  
Transmission Electron ◽  
Experimental Parameters ◽  
Mild Temperature ◽  
Temperature Time

Large scale SnO2nanotubes are successfully obtained by a facile hydrothermal method at a mild temperature. The morphologies and the microstructures of the as-synthesized SnO2products are characterized by scanning electron microscope (SEM) and transmission electron microscope (TEM). The average diameter of the nanotubes is about 100 nm. The phase and composition of the as-obtained products are investigated by X-ray diffraction (XRD). A series of comparison experiments were conducted by varying the experimental parameters, such as temperature, time, and the amount of the alkali, to study the formation mechanism of SnO2nanotubes.

Study of temperature-dependent crystalline state evolution of β-SiC nanorods by X-ray diffraction

2013 ◽  
Vol 28 (S1) ◽  
pp. S37-S40 ◽  
Author(s):  
M. Zhang ◽  
Z.J. Li ◽  
A.L. Meng
Keyword(s):  
Electron Microscope ◽  
Structural Information ◽  
X Ray Diffraction ◽  
Temperature Dependent ◽  
X Ray ◽  
Transmission Electron ◽  
State Evolution ◽  
Specific Temperature ◽  
Temperature Scanning ◽  
Shed Light

Investigations into the morphology and structural evolvement of nanomaterials are essential for understanding the growth process. Herein, we present meaningful results on crystallinity transformation of β-SiC nanorods at different preparation temperatures using X-ray diffraction. Results of the characterization indicated that both crystallinity and yield of the as-prepared β-SiC nanostructures were enhanced with increasing reaction temperature. Scanning electron microscope and high-resolution transmission electron microscope were further employed to understand detailed structural information of the SiC nanorods obtained at specific temperature. The results may shed light on structural evolvement for fabrication of nanomaterials.

scholarly journals Gas Phase Growth of Wurtzite ZnS Nanobelts on a Large Scale

2013 ◽  
Vol 2013 ◽  
pp. 1-4 ◽  
Author(s):  
Jing Wang ◽  
Yang Jiao ◽  
Yang Liu ◽  
Zhenglin Zhang ◽  
Fengyu Qu ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Large Scale ◽  
Room Temperature ◽  
Thermal Evaporation ◽  
Deep Level ◽  
Green Emission ◽  
X Ray Diffraction ◽  
Phase Growth ◽  
X Ray ◽  
Transmission Electron

We showed large-scale synthesis of ZnS nanobelts by simply thermal evaporation of ZnS powder in the presence of Au catalysts at 1020°C. Scanning electron microscope (SEM), transmission electron microscope (TEM), and X-ray diffraction (XRD) analyses demonstrated that the as-obtained ZnS nanobelts possess hexagonal wurtzite structures. The nanobelts have lengths ranging from tens to hundreds of micrometers, thicknesses of tens of nanometers, and widths ranging from hundreds of nanometers to the order of micrometers. The growth process was proposed on the basis of known vapor-liquid-solid (VLS) mechanism. Room temperature photoluminescence measurements showed that the as-synthesized ZnS nanostructures had a strong green emission bands at a wavelength of 427 nm, which can be attributed to deep-level emissions induced by defects or impurities.

Reconstruction of electron holograms recorded in a non-FEG, non-biprism TEM

1995 ◽  
Vol 53 ◽  
pp. 618-619
Author(s):  
Z.L. Wang
Keyword(s):  
Electron Microscope ◽  
Single Crystal ◽  
Experimental Technique ◽  
Transmission Electron Microscope ◽  
The Other ◽  
Electron Holography ◽  
Transmission Electron ◽  
Coherent Sources ◽  
Imaging Theory ◽  
Normal Specimen

An experimental technique for performing electron holography using a non-FEG, non-biprism transmission electron microscope (TEM) has been introduced by Ru et al. A double stacked specimens, one being a single crystal foil and the other the specimen, are loaded in the normal specimen position in TEM. The single crystal, which is placed onto the specimen, is responsible to produce two beams that are equivalent to two virtual coherent sources illuminating the specimen beneath, thus, permitting electron holography of the specimen. In this paper, the imaging theory of this technique is described. Procedures are introduced for digitally reconstructing the holograms.

Observation of dislocations in dynamically loaded Cu-SiO2

1986 ◽  
Vol 44 ◽  
pp. 424-425
Author(s):  
D. S. Pritchard
Keyword(s):  
Electron Microscope ◽  
Strain Rate ◽  
Single Crystal ◽  
Transmission Electron Microscope ◽  
Volume Fraction ◽  
Screw Dislocations ◽  
Spherical Inclusions ◽  
Transmission Electron ◽  
Crystal Dispersion ◽  
Strain Rate Loading

The effect of varying the strain rate loading conditions in compression on a copper single crystal dispersion-hardened with SiO2 particles has been examined. These particles appear as small spherical inclusions in the copper lattice and have a volume fraction of 0.6%. The structure of representative crystals was examined prior to any testing on a transmission electron microscope (TEM) to determine the nature of the dislocations initially present in the tested crystals. Only a few scattered edge and screw dislocations were viewed in those specimens.

Automatic analysis of Kikuchi diffraction patterns

1994 ◽  
Vol 52 ◽  
pp. 900-901
Author(s):  
H. Weiland ◽  
D. P. Field
Keyword(s):  
Electron Beam ◽  
Electron Microscope ◽  
Spatial Resolution ◽  
Relevant Information ◽  
Crystalline Materials ◽  
Large Size ◽  
Transmission Electron ◽  
New Type ◽  
Diffraction Patterns ◽  
Orientation Determination

Recent advances in the automatic indexing of backscatter Kikuchi diffraction patterns on the scanning electron microscope (SEM) has resulted in the development of a new type of microscopy. The ability to obtain statistically relevant information on the spatial distribution of crystallite orientations is giving rise to new insight into polycrystalline microstructures and their relation to materials properties. A limitation of the technique in the SEM is that the spatial resolution of the measurement is restricted by the relatively large size of the electron beam in relation to various microstructural features. Typically the spatial resolution in the SEM is limited to about half a micron or greater. Heavily worked structures exhibit microstructural features much finer than this and require resolution on the order of nanometers for accurate characterization. Transmission electron microscope (TEM) techniques offer sufficient resolution to investigate heavily worked crystalline materials.Crystal lattice orientation determination from Kikuchi diffraction patterns in the TEM (Figure 1) requires knowledge of the relative positions of at least three non-parallel Kikuchi line pairs in relation to the crystallite and the electron beam.

Luminescent Properties of Gd2MoO6:Eu3+ Nanophosphor for WLEDs

2021 ◽  
Author(s):  
Yan Chen ◽  
Yuemei Lan ◽  
Dong Wang ◽  
Guoxing Zhang ◽  
Wenlong Peng ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Transmission Electron Microscope ◽  
Fluorescence Spectra ◽  
Solvothermal Method ◽  
Luminescent Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron

A series of Gd2-xMoO6:xEu3+(x=0.18-0.38) nanophosphors were synthesized by the solvothermal method. The properties of this nanophosphor were characterized by x-ray diffraction (XRD), transmission electron microscope (TEM), fluorescence spectra and diffuse...

Magnetic nanostructured lipid carrier for dual triggered curcumin delivery: Preparation, characterization and toxicity evaluation on isolated rat liver mitochondria

2021 ◽  
pp. 088532822110346
Author(s):  
Mohammad Yoozbashi ◽  
Hamid Rashidzadeh ◽  
Mehraneh Kermanian ◽  
Somayeh Sadighian ◽  
Mir-Jamal Hosseini ◽  
...  
Keyword(s):  
In Vitro Study ◽  
Liver Mitochondria ◽  
Rat Liver Mitochondria ◽  
Nanostructured Lipid Carrier ◽  
Mitochondrial Toxicity ◽  
X Ray Diffraction ◽  
Temperature Dependent ◽  
Reducing Ability ◽  
Transmission Electron

In this research, magnetic nanostructured lipid carriers (Mag-NLCs) were synthesized for curcumin (CUR) delivery. NLCs are drug-delivery systems prepared by mixing solid and liquid (oil) lipids. For preparation of NLCs, cetylpalmitate was selected as solid lipid and fish oil as liquid lipid. CUR-Mag-NLCs were prepared using high-pressure homogenization technique and were characterized by methods including X-ray diffraction (XRD), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), and dynamic light scattering (DLS). The CUR-Mag-NLCs were developed as a particle with a size of 140 ± 3.6 nm, a polydispersity index of 0.196, and a zeta potential of −22.6 mV. VSM analysis showed that the CUR-Mag-NLCs have excellent magnetic properties. Release rate of the drug was higher at 42 °C than 37 °C, indicating that release of the synthesized nanoparticles is temperature-dependent. Evaluation of mitochondrial toxicity was done using the isolated rats liver mitochondria including glutathione (GSH), malondialdehyde (MDA), and the ferric- reducing ability of plasma (FRAP) assays to study biosafety of the CUR-Mag-NLCs. Results of In vitro study on the isolated mitochondria revealed that both CUR-Mag-NLCs and curcumin have no specific mitochondrial toxicity.

Sign in / Sign up

Export Citation Format

Share Document