scholarly journals Solar Tower Power Plants of Molten Salt External Receivers in Algeria: Analysis of Direct Normal Irradiation on Performance

2018 ◽  
Vol 8 (8) ◽  
pp. 1221 ◽  
Author(s):  
Abdelkader Rouibah ◽  
Djamel Benazzouz ◽  
Rahmani Kouider ◽  
Awf Al-Kassir ◽  
Justo García-Sanz-Calcedo ◽  
...  
Keyword(s):  
Power Generation ◽  
Energy Storage ◽  
Thermal Energy ◽  
Greenhouse Effect ◽  
Energy Production ◽  
Power Plants ◽  
Storage Capacity ◽  
Real Data ◽  
Multiple Power ◽  
And Storage

The increase of solar energy production has become a solution to meet the demand of electricity and reduce the greenhouse effect worldwide. This paper aims to determine the performance and viability of direct normal irradiation of three solar tower power plants in Algeria, to be installed in the highlands and the Sahara (Béchar, El Oued, and Djelfa regions). The performance of the plants was obtained through a system advisor model simulator. It used real data gathered from appropriate meteorological files. A relationship between the solar multiple (SM), power generation, and thermal energy storage (TES) hours was observed. The results showed that the optimal heliostat field corresponds to 1.8 SM and 2 TES hours in Béchar, 1.2 SM and 2 TES hours for El Oued, and 1.5 SM and 4 TES hours for Djelfa. This study shows that there is an interesting relationship between the solar multiple, power generation, and storage capacity.

scholarly journals Addressing Industrial Waste Heat Supply Variability With Organic Rankine Cycle Systems Incorporating Thermal Energy Storage

2021 ◽  
Author(s):  
Bipul Krishna Saha ◽  
Basab Chakraborty ◽  
Rohan Dutta
Keyword(s):  
Power Generation ◽  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Power Plants ◽  
Waste Heat ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Working Fluid ◽  
Low Grade

Abstract Industrial low-grade waste heat is lost, wasted and deposited in the atmosphere and is not put to any practical use. Different technologies are available to enable waste heat recovery, which can enhance system energy efficiency and reduce total energy consumption. Power plants are energy-intensive plants with low-grade waste heat. In the case of such plants, recovery of low-grade waste heat is gaining considerable interest. However, in such plants, power generation often varies based on market demand. Such variations may adversely influence any recovery system's performance and the economy, including the Organic Rankine Cycle (ORC). ORC technologies coupled with Cryogenic Energy Storage (CES) may be used for power generation by utilizing the waste heat from such power plants. The heat of compression in a CES may be stored in thermal energy storage systems and utilized in ORC or Regenerative ORC (RORC) for power generation during the system's discharge cycle. This may compensate for the variation of the waste heat from the power plant, and thereby, the ORC system may always work under-designed capacity. This paper presents the thermo-economic analysis of such an ORC system. In the analysis, a steady-state simulation of the ORC system has been developed in a commercial process simulator after validating the results with experimental data for a typical coke-oven plant. Forty-nine different working fluids were evaluated for power generation parameters, first law efficiencies, purchase equipment cost, and fixed investment payback period to identify the best working fluid.

Survey of Thermal Energy Storage for Parabolic Trough Power Plants

2002 ◽  
Vol 124 (2) ◽  
pp. 145-152 ◽  
Author(s):  
Ulf Herrmann ◽  
David W. Kearney
Keyword(s):  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Power Plants ◽  
Storage Capacity ◽  
State Of The Art ◽  
Storage System ◽  
Heat Transfer Fluid ◽  
Parabolic Trough ◽  
Tank Storage

A literature review was carried out to critically evaluate the state of the art of thermal energy storage applied to parabolic trough power plants. This survey briefly describes the work done before 1990 followed by a more detailed discussion of later efforts. The most advanced system is a 2-tank-storage system where the heat transfer fluid (HTF) also serves as storage medium. This concept was successfully demonstrated in a commercial trough plant (13.8MWe SEGS I plant; 120MWht storage capacity) and a demonstration tower plant (10MWe Solar Two; 105MWht storage capacity). However, the HTF used in state-of-the-art parabolic trough power plants 30-80MWe is expensive, dramatically increasing the cost of larger HTF storage systems. Other promising storage concepts are under development, such as concrete storage, phase change material storage, and chemical storage. These concepts promise a considerable cost reduction compared to the direct 2-tank system, but some additional R&D is required before those systems can be used in commercial solar power plants. An interesting and likely cost-effective near-term option for thermal energy storage for parabolic trough power plants is the use of an indirect 2-tank-storage, where another (less expensive) liquid medium such as molten salt is utilized rather than the HTF itself.

scholarly journals Simulations on Design and System Performance of Building Heating Boosted by Thermal Energy Storage (TES) with Magnesium Hydro Carbonates/Silica Gel

Energies ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 4520
Author(s):  
Rickard Erlund ◽  
Ron Zevenhoven
Keyword(s):  
Energy Storage ◽  
Heat Pump ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Electrical Resistance ◽  
Storage Capacity ◽  
Heating System ◽  
Heat Output ◽  
In Series ◽  
And Storage

In this paper, a simulations model of a seasonal thermal energy storage (TES) reactor integrated into a house heating system is presented. The water vapour chemisorbing reactor contains a composite material composed of silica gel and hydrated magnesium carbonate (nesquehonite, MgCO3·3H2O) that can be produced by a carbon capture and storage by mineralisation process. The performance of the TES to supply winter heat instead of electrical resistance heat is analysed. Dividing the reactor into a few units (connected in series) for better heat output and storage capacity as developed by the authors is compared to one unit or parallel unit solutions. The heating system components are an exhaust air heat pump, solar collectors and a heat recovery ventilation unit (HRV). The TES is used as heat source during colder periods, which implies improved efficiency and coefficient of performance (COP). Around 70% of electrical resistance heat, assisting an exhaust air heat pump during cold periods, can be substituted with heat from the TES according to the simulation model. Connecting three units in series will increase the usable storage capacity possibilities with by a 49% higher heat output.

Energy Storage Using Low-Pressure Feedwater

1985 ◽  
Vol 107 (3) ◽  
pp. 569-573 ◽  
Author(s):  
C. M. Harman ◽  
S. Loesch
Keyword(s):  
Energy Storage ◽  
Power Plants ◽  
Storage System ◽  
Energy Storage System ◽  
Low Pressure ◽  
Steam Power ◽  
Low Pressure Turbine ◽  
Availability Analysis ◽  
Steam Power Plants ◽  
And Storage

A method for increasing the peak output of steam power plants through use of a low-pressure feedwater storage system is presented. The generalized availability analysis involves only the low-pressure turbine, low-pressure feedwater heaters, and the storage system. With daily cycling and storage charging at near base load conditions, the turnaround efficiency of the energy storage system was found to approach 100 percent. Storage system turnaround efficiency is decreased when the energy is stored during plant part-load operation.

Sign in / Sign up

Export Citation Format

Share Document