scholarly journals Evaluation of Interlaminar Stresses in Composite Laminates with a Bolt-Filled Hole Using a Linear Elastic Traction-Separation Description

2017 ◽  
Vol 7 (1) ◽  
pp. 93
Author(s):  
Yong Cao ◽  
Yunwen Feng ◽  
Xiaofeng Xue ◽  
Wenzhi Wang ◽  
Liang Bai
Keyword(s):  
Composite Laminates ◽  
Interlaminar Stresses ◽  
Linear Elastic

Damage Control in Composite Laminates

2001 ◽  
Author(s):  
Alexander P. Suvorov ◽  
George J. Dvorak
Keyword(s):  
Composite Laminates ◽  
Composite Laminate ◽  
Damage Control ◽  
Thermomechanical Loading ◽  
Interlaminar Stresses ◽  
Damage Resistance ◽  
Viscoelastic Composite ◽  
Mechanical Loads ◽  
Composite Damage ◽  
The Matrix

Abstract Several effects that fiber prestress may have on stress redistribution in the plies of composite laminates and in the phases of individual plies are illustrated. These include improvement of composite damage resistance under tensile mechanical loads, reduction/cancelation of interlaminar stresses at free edges of composite laminate subjected to thermomechanical loading, and stress relaxation in the matrix phase of viscoelastic composite laminates. Specific results are found for quasi-isotropic and cross-ply symmetric S-glass/epoxy and carbon/epoxy AS4/EPON 828 laminates.

Interlaminar stresses in composite laminates with a circular hole

1997 ◽  
Vol 37 (2) ◽  
pp. 223-232 ◽  
Author(s):  
F.Z. Hu ◽  
C. Soutis ◽  
E.C. Edge
Keyword(s):  
Circular Hole ◽  
Composite Laminates ◽  
Interlaminar Stresses

Study of Interlaminar Stresses in Composite Laminates Subjected to Torsional Loading

AIAA Journal ◽  
2001 ◽  
Vol 39 (7) ◽  
pp. 1374-1382 ◽  
Author(s):  
John A. Mitchell ◽  
J. N. Reddy
Keyword(s):  
Composite Laminates ◽  
Interlaminar Stresses ◽  
Torsional Loading

A Preliminary Study on the Mechanical Performance of Tiled Polymer Composites

2006 ◽  
Author(s):  
M. A. Qidwai ◽  
J. N. Baucom ◽  
A. C. Leung ◽  
J. P. Thomas
Keyword(s):  
Composite Laminates ◽  
Load Transfer ◽  
Mechanical Performance ◽  
Local Stress ◽  
Superior Performance ◽  
Design Parameters ◽  
Interlaminar Stresses ◽  
Stress Concentrations ◽  
Critical Design ◽  
Composite Joint

We are developing and exploring the concept of in-plane tiling of composite laminates, called MOSAIC, to mitigate or control delamination at free edges due to interlaminar stresses. Initial mechanical testing has shown that MOSAIC composites with uniaxial graphite-fiber reinforced tiles retain the stiffness levels of traditional uniaxially reinforced composites but with reduced strength. The reduction in strength is attributed to the formation of resin-rich pockets between adjacent tiles. In this study, we have performed detailed finite element analyses to identify the critical design parameters that affect the mechanical performance of uniaxially reinforced MOSAIC composites. We have found that using continuous laminae on the outer surfaces significantly increases the overall loadcarrying capacity. Increasing aspect ratio of the pocket and decreasing material property differences between resin and tiles also cause better load transfer between tiles but may not necessarily improve overall strength due to increasing stress concentration. The tiling scheme and density of pocket placement influence the interaction of local stress concentrations. Consequently, a novel composite joint is proposed and found to have superior performance.

Interlaminar Stresses in Composite Laminates Subjected to Twisting Deformation

2017 ◽  
Vol 84 (10) ◽  
Author(s):  
Johnathan Goodsell ◽  
Bo Peng ◽  
R. Byron Pipes ◽  
Wenbin Yu
Keyword(s):  
Composite Laminates ◽  
Load Transfer ◽  
Interlaminar Stresses ◽  
Thermoelastic Deformation ◽  
Interlaminar Stress ◽  
Bending Deformation ◽  
Axial Extension ◽  
The Cross ◽  
Twisting Deformation

The interlaminar stress in angle-ply and cross-ply composite laminates subjected to twisting deformation are investigated. Two mechanisms of interlaminar load transfer have been developed by studying the angle-ply laminate and the cross-ply laminate subjected to uniform axial extension, thermoelastic deformation and anticlastic bending deformation. In the present, these mechanisms are investigated in laminates subjected to twisting deformation. It is shown that the mechanisms of interlaminar load transfer in twisting deformation are identical to those previously investigated, though they arise from different causes. Furthermore, a unified treatment of the mechanisms of interlaminar load transfer is presented for the angle-ply laminate and the cross-ply laminate subjected to the four aforementioned modes of deformation.

Sign in / Sign up

Export Citation Format

Share Document