scholarly journals A Design of a Solar Fermentation System on Chicken Manure by Fuzzy Logic Temperature Control

2021 ◽  
Vol 11 (22) ◽  
pp. 10703
Author(s):  
Jin-Jhu Su ◽  
Hsi-Chuan Huang ◽  
Yi-Ching Chen ◽  
Ming-Yao Shih
Keyword(s):  
Fuzzy Logic ◽  
Heat Source ◽  
Environmental Pollution ◽  
Ph Value ◽  
Hot Water ◽  
Chicken Manure ◽  
Effective Control ◽  
Sample Analysis ◽  
Fermentation System ◽  
System Temperature

Traditional chicken manure fermentation is mostly natural composting or exposure, which is not only time consuming but also susceptible to weather, resulting in uncontrollable quality and environmental pollution. This research aims to build a smart solar chicken manure fermentation system to control the conditions of chicken manure fermentation effectively, improve quality, and solve the problems of environmental pollution. Hot water produced by solar energy is the heat source for the main system of fermentation, and a backup supplemental heat source by gas heater is applied. The mechanism of drive, agitation, ventilation and drying as well as temperature conditions are controlled by the Arduino’s control core. Fuzzy logic is applied to maintain the optimal temperature, so that the system decomposes the bacteria optimally and reduces the consumed time for fermentation. The chicken manure humidity can be decreased from 70% to 30%, and the effective control system temperature is between 40 and 42 °C, while the pH value is changed from 8.7 to 7.4. The sample analysis of the fermentation also shows that there was 13.12% more organic matter in the chicken manure that added the decomposing bacteria than which did not contain the decomposing bacteria.

Comparative Analysis on Chemical Composition and Charcoal Characterization of Two Miscanthus Species

2011 ◽  
Vol 415-417 ◽  
pp. 1265-1272
Author(s):  
Wen Biao Zhang ◽  
Wen Zhu Li ◽  
Bing Song Zheng
Keyword(s):  
Chemical Composition ◽  
Specific Surface ◽  
Water Content ◽  
Surface Area ◽  
Specific Surface Area ◽  
Ph Value ◽  
Perennial Grass ◽  
Water Extract ◽  
Carbonization Temperature ◽  
Hot Water

Miscanthus is a highly productive, rhizomatous, C4 perennial grass that should be considered as an excellent active carbon precursor. This paper compares the charcoal characterization and chemical composition between M. sinensis and M. floridulus. Species differed in water content, hot water extract, 1% NaOH extract, organic solvent extract, cellulose, lignin and ash. Carbonization temperatures have effects on charcoal yields of Miscanthus, which ranged from 23.5% to 48.0% for M. sinensis and 11.3% to 37.2% for M. floridulus. Water content, charcoal density, pH value, and specific surface area of charcoal characterization varied between two species of Miscanthus. The specific surface area increased with the increase of carbonization temperature. The highest specific surface area of M. sinensis and M. floridulus was 351.74 m2g−1and 352.74 m2g−1, respectively, when the carbonization temperature was 800°C.

scholarly journals Increase of power and efficiency of the 900 MW supercritical power plant through incorporation of the ORC

2013 ◽  
Vol 34 (4) ◽  
pp. 51-71 ◽  
Author(s):  
Paweł Ziółkowski ◽  
Dariusz Mikielewicz ◽  
Jarosław Mikielewicz
Keyword(s):  
Power Plant ◽  
Heat Source ◽  
Steam Turbine ◽  
Hybrid System ◽  
Heat Recovery ◽  
Reference Conditions ◽  
Hot Water ◽  
Operational Parameters ◽  
Reference Case ◽  
Unit Power

Abstract The objective of the paper is to analyse thermodynamical and operational parameters of the supercritical power plant with reference conditions as well as following the introduction of the hybrid system incorporating ORC. In ORC the upper heat source is a stream of hot water from the system of heat recovery having temperature of 90 °C, which is additionally aided by heat from the bleeds of the steam turbine. Thermodynamical analysis of the supercritical plant with and without incorporation of ORC was accomplished using computational flow mechanics numerical codes. Investigated were six working fluids such as propane, isobutane, pentane, ethanol, R236ea and R245fa. In the course of calculations determined were primarily the increase of the unit power and efficiency for the reference case and that with the ORC.

scholarly journals Effective Control of Postprandial Glucose Level through Inhibition of Intestinal Alpha Glucosidase byCymbopogon martinii(Roxb.)

2012 ◽  
Vol 2012 ◽  
pp. 1-6 ◽  
Author(s):  
Varsha Ghadyale ◽  
Shrihari Takalikar ◽  
Vivek Haldavnekar ◽  
Akalpita Arvindekar
Keyword(s):  
Body Weight ◽  
Silica Gel ◽  
Glucose Level ◽  
Postprandial Glucose ◽  
Hot Water ◽  
In Vivo Studies ◽  
Effective Control ◽  
Alpha Glucosidase ◽  
Postprandial Glucose Level

Inhibition of intestinal alpha glucosidase plays a major role in preventing rise in postprandial glucose level in diabetics.Cymbopogon martinii(CM) (family Poaceae) is used in traditional Indian medicine in treatment of diabetes mellitus. The alpha glucosidase inhibitory action of the plant is studied. The active component was separated using hot water extraction of the whole plant powder, differential solvent extraction, and silica gel column chromatography. The 30 : 70 toluene : ethyl acetate fraction showed optimum activity. The silica gel chromatography fraction demonstrated 98, 98, and 68% inhibition for starch, maltose, and sucrose, respectively, at 5 mg/kg body weight of rats. Intestinal absorption studies using noneverted intestinal sacs, as well as in vivo studies in streptozotocin-induced diabetic rats using oral glucose tolerance with maltose and sucrose load, revealed better inhibition of alpha glucosidase as compared to acarbose. Kinetic studies using Lineweaver Burk plot showed mixed to noncompetitive type of inhibition by CM. In vivo studies with maltose load of 2 mg and 3 mg/gm body weight showed a noncompetitive pattern of inhibition at 5 mg/kg body weight of CM as against 60 mg/kg body weight of acarbose. Thus CM is more effective alpha glucosidase inhibitor and at lower concentration than acarbose.

scholarly journals Utilisation of bleed steam heat to increase the upper heat source temperature in low-temperature ORC

2011 ◽  
Vol 32 (3) ◽  
pp. 57-70 ◽  
Author(s):  
Dariusz Mikielewicz ◽  
Jarosław Mikielewicz
Keyword(s):  
Power Plant ◽  
Low Temperature ◽  
Heat Source ◽  
Silicone Oil ◽  
Hot Water ◽  
Working Fluid ◽  
Preliminary Heating ◽  
Source Temperature ◽  
Heat Source Temperature ◽  
Steam Heat

Utilisation of bleed steam heat to increase the upper heat source temperature in low-temperature ORC In the paper presented is a novel concept to utilize the heat from the turbine bleed to improve the quality of working fluid vapour in the bottoming organic Rankine cycle (ORC). That is a completely novel solution in the literature, which contributes to the increase of ORC efficiency and the overall efficiency of the combined system of the power plant and ORC plant. Calculations have been accomplished for the case when available is a flow rate of low enthalpy hot water at a temperature of 90 °C, which is used for preliminary heating of the working fluid. That hot water is obtained as a result of conversion of exhaust gases in the power plant to the energy of hot water. Then the working fluid is further heated by the bleed steam to reach 120 °C. Such vapour is subsequently directed to the turbine. In the paper 5 possible working fluids were examined, namely R134a, MM, MDM, toluene and ethanol. Only under conditions of 120 °C/40 °C the silicone oil MM showed the best performance, in all other cases the ethanol proved to be best performing fluid of all. Results are compared with the "stand alone" ORC module showing its superiority.

Modeling and Analysis of Power Conversion System for High Temperature Gas Cooled Reactor With Cogeneration

2008 ◽  
Author(s):  
Ali Afrazeh ◽  
Hiwa Khaledi ◽  
Mohammad Bagher Ghofrani
Keyword(s):  
High Temperature ◽  
Heat Source ◽  
Gas Turbine ◽  
Power Conversion ◽  
Hot Water ◽  
Working Fluid ◽  
Closed Cycle ◽  
Nuclear Heat ◽  
Conversion System ◽  
High Temperature Gas

A gas turbine in combination with a nuclear heat source has been subject of study for some years. This paper describes the advantages of a gas turbine combined with an inherently safe and well-proven nuclear heat source. The design of the power conversion system is based on a regenerative, non-intercooled, closed, direct Brayton cycle with high temperature gas-cooled reactor (HTGR), as heat source and helium gas as the working fluid. The plant produces electricity and hot water for district heating (DH). Variation of specific heat, enthalpy and entropy of working fluid with pressure and temperature are included in this model. Advanced blade cooling technology is used in order to allow for a high turbine inlet temperature. The paper starts with an overview of the main characteristics of the nuclear heat source, Then presents a study to determine the specifications of a closed-cycle gas turbine for the HTGR installation. Attention is given to the way such a closed-cycle gas turbine can be modeled. Subsequently the sensitivity of the efficiency to several design choices is investigated. This model is developed in Fortran.

scholarly journals A Fuzzy Logic-Based Control Algorithm for the Recharge/V2G of a Nine-Phase Integrated On-Board Battery Charger

Electronics ◽  
2020 ◽  
Vol 9 (6) ◽  
pp. 946 ◽  
Author(s):  
Felice De Luca ◽  
Vito Calderaro ◽  
Vincenzo Galdi
Keyword(s):  
Fuzzy Logic ◽  
Control Strategy ◽  
Energy Demand ◽  
Fuzzy Logic Controller ◽  
Fuzzy Controller ◽  
Energy Resource ◽  
Reference Value ◽  
Active Role ◽  
Effective Control ◽  
Battery Charger

Energy demand associated with the ever-increasing penetration of electric vehicles on worldwide roads is set to rise exponentially in the coming years. The fact that more and more vehicles will be connected to the electricity network will offer greater advantages to the network operators, as the presence of an on-board battery of discrete capacity will be able to support a whole series of ancillary services or smart energy management. To allow this, the vehicle must be equipped with a bidirectional full power charger, which will allow not only recharging but also the supply of energy to the network, playing an active role as a distributed energy resource. To manage recharge and vehicle-to-grid (V2G) operations, the charger has to be more complex and has to require a fast and effective control structure. In this work, we present a control strategy for an integrated on-board battery charger with a nine-phase electric machine. The control scheme integrates a fuzzy logic controller within a voltage-oriented control strategy. The control has been implemented and simulated in Simulink. The results show how the voltage on the DC-bus is controlled to the reference value by the fuzzy controller and how the CC/CV charging mode of the battery is possible, using different charging/discharging current levels. This allows both three-phase fast charge and V2G operations with fast control response time, without causing relevant distortion grid-side (Total Harmonic Distortion is maintained around 3%), even in the presence of imbalances of the machine, and with very low ripple stress on the battery current/voltage.

Survey of Combined Hydrogen-Methane Production in Anaerobic Baffled Reactor (ABR)

2012 ◽  
Vol 550-553 ◽  
pp. 3180-3183 ◽  
Author(s):  
Guo Chen Zheng ◽  
Jian Zheng Li ◽  
Wei Li ◽  
Zhu Jun Tian ◽  
Shuang Shi Dong ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Phase Separation ◽  
Environmental Pollution ◽  
Methane Production ◽  
Biological Treatment ◽  
Methane Fermentation ◽  
Anaerobic Reactor ◽  
Fermentation System ◽  
Anaerobic Baffled Reactor ◽  
Stage Process

Anaerobic fermentative technology is an important route to solving environmental pollution and resources problems. Combined hydrogen and methane production in a two-stage process is a concept which has been developed in recent years Anaerobic biological treatment organic wastewater can produce large amounts of hydrogen and methane，which can be used as energy carrier. At present，the research focusing on the adjustment of fermentation hydrogen-methane production has been conducted. Furthermore, the simultaneous hydrogen-methane production was tested and optimized. However, it lacked combined hydrogen-methane production in an anaerobic reactor in literature so far. Based on preview experiment, the paper studied the simultaneous hydrogen-methane fermentation in an anaerobic baffled reactor (ABR) system. ABR has the advantage of biomass phase separation and integration of acidogenic and methanogenic processes to simultaneously conduct hydrogen-methane production during wastewater treatment. Through deep biohydrogen production, it can enhance the activity of hydrogen-producing acetogens (HPA) and the efficiencies of the combined hydrogen-methane fermentation system. It showed to enhance the activity of HPA was the key to the combined hydrogen-methane production.

scholarly journals Effect of Temperature and Water Potential on Survival and Mycelial Growth of Phaeomoniella chlamydospora and Phaeoacremonium spp.

Plant Disease ◽  
2001 ◽  
Vol 85 (2) ◽  
pp. 195-201 ◽  
Author(s):  
E. C. Whiting ◽  
A. Khan ◽  
W. D. Gubler
Keyword(s):  
Water Treatment ◽  
Water Potential ◽  
Growth Rates ◽  
Mycelial Growth ◽  
Hot Water ◽  
Effect Of Temperature ◽  
Effective Control ◽  
Conidial Suspension ◽  
Hot Water Treatment ◽  
Phaeomoniella Chlamydospora

Phaeomoniella chlamydospora, a species of Phaeomoniella, and two species of Phaeoacremonium, P. inflatipes and P. aleophilum, have been associated with young grapevine decline in major production regions of California. Phaeomoniella chlamydospora has been isolated from healthy vines and inoculated but non-symptomatic vines and rooted cuttings. Effects of temperature and water potential on fungal response in culture were investigated to find effective control strategies for nurseries. Mycelial growth rates at temperatures 5 to 37°C showed a quadratic response with optimum growth rates for Phaeomoniella chlamydospora and P. aleophilum at 25°C and at 30°C for P. inflatipes. Response to water potential varied by isolates within a species, but isolates of Phaeomoniella chlamydospora were not sensitive to decreasing water potential. A conidial suspension and plugs of agar with mycelia were placed in glass vials and incubated in hot water for 15 to 120 min. Conidia were sensitive to hot-water treatment after 15 and 30 min. Nevertheless, mycelia of P. inflatipes from agar plugs grew on potato dextrose agar at 22°C after 120 min incubation at 51°C. Because the fungi were not killed by incubation in glass vials at 51°C, methods other than hot-water treatment may be more effective in eliminating Phaeomoniella chlamydospora and Phaeoacremonium spp. from dormant vine cuttings.

Simulation of Thermal Performance of Solar Collector Arrays

1981 ◽  
Vol 103 (3) ◽  
pp. 258-267 ◽  
Author(s):  
A. H. Fanney ◽  
W. C. Thomas
Keyword(s):  
Heat Source ◽  
Water System ◽  
Flow Characteristics ◽  
Longwave Radiation ◽  
Heat Losses ◽  
Hot Water ◽  
Outdoor Environment ◽  
Energy Output ◽  
In Series ◽  
Electric Heat

An experimental method is described for simulating the useful energy supplied by collector arrays during tests of solar water heating systems. The method uses an electric heat source to simulate the absorbed solar energy in series with nonirradiated collectors to simulate the concurrent heat losses. This configuration maintains the collector-loop flow characteristics which are important for system tests. Expressions are developed for programming the heat source for collector arrays connected in parallel and series combinations with the heat source located either upstream or downstream from the nonirradiated array. Thermal modeling of representative arrays is used to investigate the consequences of using linearized collector efficiency curves to program the heat source and of using nonirradiated collectors to simulate heat losses. The absence of absorbed solar radiation in collector covers indoors is shown to partially cancel the effects of generally higher windspeed and increased longwave radiation loss in the outdoor environment. In typical situations, the analytical model showed that the use of nonirradiated collectors in series with an electric heat source may give up to 10 percent higher useful energy output as compared to an irradiated array. The difference, however, can be reduced by closely matching indoor and outdoor environmental conditions and by locating the heat source downstream from the nonirradiated collector array. The results of experiments to verify the performance of a nonirradiated array with a downstream electric heat source are presented. Day-long tests of a domestic solar hot water system with irradiated collectors were repeated using a nonirradiated array with a downstream heat source. The measured useful energy in the two cases was consistent with the results of the analytical investigation.

Sign in / Sign up

Export Citation Format

Share Document