scholarly journals Biocompatible Dispersants for Carbon Nanomaterials

2021 ◽  
Vol 11 (22) ◽  
pp. 10565
Author(s):  
Hugh Mohan ◽  
Michał Bartkowski ◽  
Silvia Giordani
Keyword(s):  
Mechanical Properties ◽  
Aqueous Solutions ◽  
Biomedical Applications ◽  
Carbon Nanomaterials ◽  
Factors Affecting ◽  
Different Types ◽  
Unique Chemical

Carbon nanomaterials (CNMs) are a fascinating class of materials that have gained considerable interest in recent years. Their favourable biocompatibility, combined with unique chemical and mechanical properties, has attracted scientists from various disciplines. A significant hurdle in their deployment in biomedical applications is their hydrophobicity in their pristine form. This review surveys and discusses existing non-covalent methods of functionalising CNMs with biocompatible dispersants to facilitate their incorporation into aqueous solutions. Different types of dispersants will be examined and compared as well as the factors affecting their efficiency. This work seeks to provide a compilation of the various methods employed in producing biocompatible CNM dispersions.

Synthetic control over the structure and symmetry of carbon nanotubes: Towards biomedical applications

2011 ◽  
Vol 1297 ◽  
Author(s):  
Michael S. Lowry ◽  
Alfredo Rayms-Keller ◽  
Karen J. Long ◽  
Francisco Santiago ◽  
Victor H. Gehman ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Electron Microscope ◽  
Vapor Deposition ◽  
Biomedical Applications ◽  
Chemical Vapor ◽  
Synthetic Control ◽  
Growth Site ◽  
Unique Chemical ◽  
Scanning Electron

ABSTRACTCarbon nanotubes (CNTs) are appealing materials for biomedical applications due to their unique chemical, electrical and mechanical properties. The emphasis of the present work is on controlling the structure and symmetry of carbon nanotubes by imposing an applied stress at the CNT growth site. CNTs were grown under these conditions using standard chemical vapor deposition (CVD) techniques and were subsequently characterized with a scanning electron microscope; the methodology and implications of this approach are discussed herein.

PHYSICAL DISPERSION OF NANOCARBONS IN COMPOSITES–A REVIEW

2017 ◽  
Vol 79 (5) ◽  
Author(s):  
Jamal M. A. Alsharef ◽  
Mohd Raihan Taha ◽  
Tanveer Ahmed Khan
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanomaterials ◽  
Key Factors ◽  
Physical Methods ◽  
Aspect Ratios ◽  
Chemical Agents ◽  
Different Types ◽  
Negative Effect ◽  
Properties Of Composites

Recently, nanocarbons (carbon nanofibers (CNFs) and carbon nanotubes (CNTs)) have been used efficiently in numerous research works to significantly enhance the mechanical properties of composites. With their amazing mechanical properties and exceptionally high aspect ratios, nanocarbons (NCs) are seen as one of the most beneficial nanomaterials for nano-reinforcement. The dispersion of NCs is one of the key factors that strongly influence the properties of nanocomposites. Several researches have been carried out with chemical agents to achieve a consistent dispersal of carbon nanomaterials in water, although, if the process is uncontrolled, it can shorten or damage the NCs or even dissolve them, and this can have a negative effect on the composites as well. Therefore, if NCs are to be used as reinforcement for composites, physical methods have to be employed to disperse the NCs before they can be mixed into the composites. This paper presents an overview of the different types of NCs, their different uses and the research conducted for the dispersion of NCs by chemical and physical methods. Furthermore, a summary is given of the measurement and characterization of the dispersibility of NCs.

scholarly journals Investigating the Effect of Carbon Nanomaterials Reinforcing Poly(Ε-Caprolactone) Scaffolds for Bone Repair Applications

2020 ◽  
Vol 6 (2) ◽  
Author(s):  
Yanhao Hou ◽  
Weiguang Wang ◽  
Paulo Jorge Da Silva Bartolo
Keyword(s):  
Mechanical Properties ◽  
Bone Repair ◽  
Carbon Nanomaterials ◽  
Cell Attachment ◽  
Three Dimensional ◽  
Surface Characteristics ◽  
Mechanical Support ◽  
Tissue Formation ◽  
Different Types ◽  
3D Printed

Scaffolds, three-dimensional (3D) substrates providing appropriate mechanical support and biological environments for new tissue formation, are the most common approaches in tissue engineering. To improve scaffold properties such as mechanical properties, surface characteristics, biocompatibility and biodegradability, different types of fillers have been used reinforcing biocompatible and biodegradable polymers. This paper investigates and compares the mechanical and biological behaviors of 3D printed poly(ε-caprolactone) scaffolds reinforced with graphene (G) and graphene oxide (GO) at different concentrations. Results show that contrary to G which improves mechanical properties and enhances cell attachment and proliferation, GO seems to show some cytotoxicity, particular at high contents.

Cellulose Nanofibrils-based Hydrogels for Biomedical Applications: Progresses and Challenges

2020 ◽  
Vol 27 (28) ◽  
pp. 4622-4646 ◽  
Author(s):  
Huayu Liu ◽  
Kun Liu ◽  
Xiao Han ◽  
Hongxiang Xie ◽  
Chuanling Si ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Metal Ion ◽  
Biomedical Applications ◽  
Biomedical Application ◽  
Cellulose Nanofibrils ◽  
Wound Dressings ◽  
Preparation Methods ◽  
Tissue Scaffold ◽  
Surface Areas ◽  
Mechanical Methods

Background: Cellulose Nanofibrils (CNFs) are natural nanomaterials with nanometer dimensions. Compared with ordinary cellulose, CNFs own good mechanical properties, large specific surface areas, high Young's modulus, strong hydrophilicity and other distinguishing characteristics, which make them widely used in many fields. This review aims to introduce the preparation of CNFs-based hydrogels and their recent biomedical application advances. Methods: By searching the recent literatures, we have summarized the preparation methods of CNFs, including mechanical methods and chemical mechanical methods, and also introduced the fabrication methods of CNFs-based hydrogels, including CNFs cross-linked with metal ion and with polymers. In addition, we have summarized the biomedical applications of CNFs-based hydrogels, including scaffold materials and wound dressings. Results: CNFs-based hydrogels are new types of materials that are non-toxic and display a certain mechanical strength. In the tissue scaffold application, they can provide a micro-environment for the damaged tissue to repair and regenerate it. In wound dressing applications, it can fit the wound surface and protect the wound from the external environment, thereby effectively promoting the healing of skin tissue. Conclusion: By summarizing the preparation and application of CNFs-based hydrogels, we have analyzed and forecasted their development trends. At present, the research of CNFs-based hydrogels is still in the laboratory stage. It needs further exploration to be applied in practice. The development of medical hydrogels with high mechanical properties and biocompatibility still poses significant challenges.

scholarly journals The Effect of Different Types of Internal Curing Liquid on the Properties of Alkali-Activated Slag (AAS) Mortar

2021 ◽  
Vol 13 (4) ◽  
pp. 2407
Author(s):  
Guang-Zhu Zhang ◽  
Xiao-Yong Wang ◽  
Tae-Wan Kim ◽  
Jong-Yeon Lim ◽  
Yi Han
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Deionized Water ◽  
Internal Curing ◽  
Control Group ◽  
Alkali Activated Slag ◽  
Different Types ◽  
Naoh Solution ◽  
Activated Slag ◽  
Alkali Activated

This study shows the effect of different types of internal curing liquid on the properties of alkali-activated slag (AAS) mortar. NaOH solution and deionized water were used as the liquid internal curing agents and zeolite sand was the internal curing agent that replaced the standard sand at 15% and 30%, respectively. Experiments on the mechanical properties, hydration kinetics, autogenous shrinkage (AS), internal temperature, internal relative humidity, surface electrical resistivity, ultrasonic pulse velocity (UPV), and setting time were performed. The conclusions are as follows: (1) the setting times of AAS mortars with internal curing by water were longer than those of internal curing by NaOH solution. (2) NaOH solution more effectively reduces the AS of AAS mortars than water when used as an internal curing liquid. (3) The cumulative heat of the AAS mortar when using water for internal curing is substantially reduced compared to the control group. (4) For the AAS mortars with NaOH solution as an internal curing liquid, compared with the control specimen, the compressive strength results are increased. However, a decrease in compressive strength values occurs when water is used as an internal curing liquid in the AAS mortar. (5) The UPV decreases as the content of zeolite sand that replaces the standard sand increases. (6) When internal curing is carried out with water as the internal curing liquid, the surface resistivity values of the AAS mortar are higher than when the alkali solution is used as the internal curing liquid. To sum up, both NaOH and deionized water are effective as internal curing liquids, but the NaOH solution shows a better performance in terms of reducing shrinkage and improving mechanical properties than deionized water.

scholarly journals Dynamic Mechanical Control of Alginate-Fibronectin Hydrogels with Dual Crosslinking: Covalent and Ionic

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 433
Author(s):  
Sara Trujillo ◽  
Melanie Seow ◽  
Aline Lueckgen ◽  
Manuel Salmeron-Sanchez ◽  
Amaia Cipitria
Keyword(s):  
Mechanical Properties ◽  
Biomedical Applications ◽  
Divalent Cations ◽  
Dynamic Control ◽  
Dynamic Mechanical Properties ◽  
Full Length ◽  
Dynamic Mechanical ◽  
Covalent Crosslinking ◽  
Calcium Cations ◽  
Different Tissues

Alginate is a polysaccharide used extensively in biomedical applications due to its biocompatibility and suitability for hydrogel fabrication using mild reaction chemistries. Though alginate has commonly been crosslinked using divalent cations, covalent crosslinking chemistries have also been developed. Hydrogels with tuneable mechanical properties are required for many biomedical applications to mimic the stiffness of different tissues. Here, we present a strategy to engineer alginate hydrogels with tuneable mechanical properties by covalent crosslinking of a norbornene-modified alginate using ultraviolet (UV)-initiated thiol-ene chemistry. We also demonstrate that the system can be functionalised with cues such as full-length fibronectin and protease-degradable sequences. Finally, we take advantage of alginate’s ability to be crosslinked covalently and ionically to design dual crosslinked constructs enabling dynamic control of mechanical properties, with gels that undergo cycles of stiffening–softening by adding and quenching calcium cations. Overall, we present a versatile hydrogel with tuneable and dynamic mechanical properties, and incorporate cell-interactive features such as cell-mediated protease-induced degradability and full-length proteins, which may find applications in a variety of biomedical contexts.

scholarly journals Investigation of Color Reproduction on Linen Fabrics when Printing with Mimaki TX400-1800D Inkjet with Pigment TP250 Dyes

Coatings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 354
Author(s):  
Tim Tofan ◽  
Rimantas Stonkus ◽  
Raimondas Jasevičius
Keyword(s):  
Mechanical Properties ◽  
Color Reproduction ◽  
Related Effect ◽  
Color Characteristics ◽  
Fabric Density ◽  
Different Types ◽  
The Difference ◽  
Printing Parameters ◽  
Linen Fabric

The aim of this research is to investigate related effect of dyeability to linen textiles related to different printing parameters. The study investigated the change in color characteristics when printing on linen fabrics with an inkjet MIMAKI Tx400-1800D printer with pigmented TP 250 inks. The dependence of color reproduction on linen fabrics on the number of print head passes, number of ink layers to be coated, linen fabric density, and different types of linen fabric was investigated. All this affects the quality of print and its mechanical properties. The change in color characteristics on different types of linen fabrics was determined experimentally. We determine at which print settings the most accurate color reproduction can be achieved on different linen fabrics. The difference between the highest and the lowest possible number of head passages was investigated. The possibilities of reproducing different linen fabric colors were determined.

Sign in / Sign up

Export Citation Format

Share Document