scholarly journals Recent Developments in Plasmonic Sensors of Phenol and Its Derivatives

2021 ◽  
Vol 11 (22) ◽  
pp. 10519
Author(s):  
Nguyễn Hoàng Ly ◽  
Sang Jun Son ◽  
Ho Hyun Kim ◽  
Sang-Woo Joo
Keyword(s):  
Phenolic Compounds ◽  
Optical Sensors ◽  
Noble Metals ◽  
Raw Material ◽  
Detection Methods ◽  
Localized Surface Plasmon ◽  
Trace Detection ◽  
Toxic Response ◽  
Recent Developments ◽  
Analytical Tools

Many scientists are increasingly interested in on-site detection methods of phenol and its derivatives because these substances have been universally used as a significant raw material in the industrial manufacturing of various chemicals of antimicrobials, anti-inflammatory drugs, antioxidants, and so on. The contamination of phenolic compounds in the natural environment is a toxic response that induces harsh impacts on plants, animals, and human health. This mini-review updates recent developments and trends of novel plasmonic resonance nanomaterials, which are assisted by various optical sensors, including colorimetric, fluorescence, localized surface plasmon resonance (LSPR), and plasmon-enhanced Raman spectroscopy. These advanced and powerful analytical tools exhibit potential application for ultrahigh sensitivity, selectivity, and rapid detection of phenol and its derivatives. In this report, we mainly emphasize the recent progress and novel trends in the optical sensors of phenolic compounds. The applications of Raman technologies based on pure noble metals, hybrid nanomaterials, and metal–organic frameworks (MOFs) are presented, in which the remaining establishments and challenges are discussed and summarized to inspire the future improvement of scientific optical sensors into easy-to-operate effective platforms for the rapid and trace detection of phenol and its derivatives.

Semiconductor Photocatalysts for Solar-to-Hydrogen Energy Conversion: Recent Advances of CdS

2020 ◽  
Vol 16 ◽  
Author(s):  
Yuxue Wei ◽  
Honglin Qin ◽  
Jinxin Deng ◽  
Xiaomeng Cheng ◽  
Mengdie Cai ◽  
...  
Keyword(s):  
Hydrogen Production ◽  
Visible Light ◽  
Hydrogen Evolution ◽  
Water Splitting ◽  
Visible Light Irradiation ◽  
Noble Metals ◽  
Light Irradiation ◽  
Photocatalytic Hydrogen Evolution ◽  
Theoretical Design ◽  
Recent Developments

Introduction: Solar-driven photocatalytic hydrogen production from water splitting is one of the most promising solutions to satisfy the increasing demands of a rapidly developing society. CdS has emerged as a representative semiconductor photocatalyst due to its suitable band gap and band position. However, the poor stability and rapid charge recombination of CdS restrict its application for hydrogen production. The strategy of using a cocatalyst is typically recognized as an effective approach for improving the activity, stability, and selectivity of photocatalysts. In this review, recent developments in CdS cocatalysts for hydrogen production from water splitting under visible-light irradiation are summarized. In particular, the factors affecting the photocatalytic performance and new cocatalyst design, as well as the general classification of cocatalysts, are discussed, which includes a single cocatalyst containing noble-metal cocatalysts, non-noble metals, metal-complex cocatalysts, metal-free cocatalysts, and multi-cocatalysts. Finally, future opportunities and challenges with respect to the optimization and theoretical design of cocatalysts toward the CdS photocatalytic hydrogen evolution are described. Background: Photocatalytic hydrogen evolution from water splitting using photocatalyst semiconductors is one of the most promising solutions to satisfy the increasing demands of a rapidly developing society. CdS has emerged as a representative semiconductor photocatalyst due to its suitable band gap and band position. However, the poor stability and rapid charge recombination of CdS restrict its application for hydrogen production. The strategy of using a cocatalyst is typically recognized as an effective approach for improving the activity, stability, and selectivity of photocatalysts. Methods: This review summarizes the recent developments in CdS cocatalysts for hydrogen production from water splitting under visible-light irradiation. Results: Recent developments in CdS cocatalysts for hydrogen production from water splitting under visible-light irradiation are summarized. The factors affecting the photocatalytic performance and new cocatalyst design, as well as the general classification of cocatalysts, are discussed, which includes a single cocatalyst containing noble-metal cocatalysts, non-noble metals, metal-complex cocatalysts, metal-free cocatalysts, and multi-cocatalysts. Finally, future opportunities and challenges with respect to the optimization and theoretical design of cocatalysts toward the CdS photocatalytic hydrogen evolution are described. Conclusion: The state-of-the-art CdS for producing hydrogen from photocatalytic water splitting under visible light is discussed. The future opportunities and challenges with respect to the optimization and theoretical design of cocatalysts toward the CdS photocatalytic hydrogen evolution are also described.

scholarly journals Bio-Based Alternatives to Phenol and Formaldehyde for the Production of Resins

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2237 ◽  
Author(s):  
P. R. Sarika ◽  
Paul Nancarrow ◽  
Abdulrahman Khansaheb ◽  
Taleb Ibrahim
Keyword(s):  
Raw Materials ◽  
Phenol Formaldehyde ◽  
Raw Material ◽  
Wood Industry ◽  
Suitable Material ◽  
The Past ◽  
Wide Range ◽  
Recent Developments ◽  
Sustainable Materials ◽  
Materials Used

Phenol–formaldehyde (PF) resin continues to dominate the resin industry more than 100 years after its first synthesis. Its versatile properties such as thermal stability, chemical resistance, fire resistance, and dimensional stability make it a suitable material for a wide range of applications. PF resins have been used in the wood industry as adhesives, in paints and coatings, and in the aerospace, construction, and building industries as composites and foams. Currently, petroleum is the key source of raw materials used in manufacturing PF resin. However, increasing environmental pollution and fossil fuel depletion have driven industries to seek sustainable alternatives to petroleum based raw materials. Over the past decade, researchers have replaced phenol and formaldehyde with sustainable materials such as lignin, tannin, cardanol, hydroxymethylfurfural, and glyoxal to produce bio-based PF resin. Several synthesis modifications are currently under investigation towards improving the properties of bio-based phenolic resin. This review discusses recent developments in the synthesis of PF resins, particularly those created from sustainable raw material substitutes, and modifications applied to the synthetic route in order to improve the mechanical properties.

scholarly journals Utilization of Cumbeba (Tacinga inamoena) Residue: Drying Kinetics and Effect of Process Conditions on Antioxidant Bioactive Compounds

Foods ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 788
Author(s):  
João Paulo de Lima Ferreira ◽  
Alexandre José de Melo Queiroz ◽  
Rossana Maria Feitosa de Figueirêdo ◽  
Wilton Pereira da Silva ◽  
Josivanda Palmeira Gomes ◽  
...  
Keyword(s):  
Phenolic Compounds ◽  
Bioactive Compounds ◽  
Fixed Bed ◽  
Drying Kinetics ◽  
Raw Material ◽  
Process Conditions ◽  
Temperature Range ◽  
Water Diffusivity ◽  
Pharmaceutical Industries ◽  
Effective Water

The residue generated from the processing of Tacinga inamoena (cumbeba) fruit pulp represents a large amount of material that is discarded without proper application. Despite that, it is a raw material that is source of ascorbic acid, carotenoids and phenolic compounds, which are valued in nutraceutical diets for allegedly combating free radicals generated in metabolism. This research paper presents a study focused on the mathematical modeling of drying kinetics and the effect of the process on the level of bioactive of cumbeba residue. The experiments of cumbeba residue drying (untreated or whole residue (WR), crushed residue (CR) and residue in the form of foam (FR)) were carried out in a fixed-bed dryer at four air temperatures (50, 60, 70 and 80 °C). Effective water diffusivity (Deff) was determined by the inverse method and its dependence on temperature was described by an Arrhenius-type equation. It was observed that, regardless of the type of pretreatment, the increase in air temperature resulted in higher rate of water removal. The Midilli model showed better simulation of cumbeba residue drying kinetics than the other models tested within the experimental temperature range studied. Effective water diffusivity (Deff) ranged from 6.4890 to 11.1900 × 10−6 m2/s, 2.9285 to 12.754 × 10−9 m2/s and 1.5393 × 10−8 to 12.4270 × 10−6 m2/s with activation energy of 22.3078, 46.7115 and 58.0736 kJ/mol within the temperature range of 50–80 °C obtained for the whole cumbeba, crushed cumbeba and cumbeba residue in the form of foam, respectively. In relation to bioactive compounds, it was observed that for a fixed temperature the whole residue had higher retention of bioactive compounds, especially phenolic compounds, whereas the crushed residue and the residue in the form of foam had intermediate and lower levels, respectively. This study provides evidence that cumbeba residue in its whole form can be used for the recovery of natural antioxidant bioactive compounds, mainly phenolic compounds, with the possibility of application in the food and pharmaceutical industries.

scholarly journals Surface Plasmonic Sensors: Sensing Mechanism and Recent Applications

Sensors ◽  
2021 ◽  
Vol 21 (16) ◽  
pp. 5262
Author(s):  
Qilin Duan ◽  
Yineng Liu ◽  
Shanshan Chang ◽  
Huanyang Chen ◽  
Jin-hui Chen
Keyword(s):  
Surface Plasmon Resonance ◽  
Optical Fiber ◽  
Surface Plasmon ◽  
Optical Sensors ◽  
Plasmon Resonance ◽  
2D Materials ◽  
Localized Surface Plasmon ◽  
Plasmonic Sensors ◽  
Hyperbolic Dispersion ◽  
Challenges And Opportunities

Surface plasmonic sensors have been widely used in biology, chemistry, and environment monitoring. These sensors exhibit extraordinary sensitivity based on surface plasmon resonance (SPR) or localized surface plasmon resonance (LSPR) effects, and they have found commercial applications. In this review, we present recent progress in the field of surface plasmonic sensors, mainly in the configurations of planar metastructures and optical-fiber waveguides. In the metastructure platform, the optical sensors based on LSPR, hyperbolic dispersion, Fano resonance, and two-dimensional (2D) materials integration are introduced. The optical-fiber sensors integrated with LSPR/SPR structures and 2D materials are summarized. We also introduce the recent advances in quantum plasmonic sensing beyond the classical shot noise limit. The challenges and opportunities in this field are discussed.

Efficient chemosensors for toxic pollutants based on photoluminescent Zn(II) and Cd(II) metal-organic networks

2021 ◽  
Author(s):  
Luis David Rosales-Vazquez ◽  
Alejandro Dorazco-González ◽  
Victor Sanchez-Mendieta
Keyword(s):  
Optical Sensors ◽  
Three Dimensional ◽  
High Sensitivity ◽  
Environmental Research ◽  
Toxic Pollutants ◽  
Sensitivity And Selectivity ◽  
Metal Organic ◽  
Analytical Tools ◽  
Organic Networks

Optical sensors with high sensitivity and selectivity, as important analytical tools for chemical and environmental research, can be accomplished by straightforward synthesis of luminescent one-, two- and three-dimensional Zn(II) and...

scholarly journals Obtaining Bioactive Compounds from the Coffee Husk (Coffea arabica L.) Using Different Extraction Methods

Molecules ◽  
2020 ◽  
Vol 26 (1) ◽  
pp. 46
Author(s):  
Mariana de Oliveira Silva ◽  
John Nonvignon Bossis Honfoga ◽  
Lorena Lucena de Medeiros ◽  
Marta Suely Madruga ◽  
Taliana Kênia Alencar Bezerra
Keyword(s):  
Phenolic Compounds ◽  
Bioactive Compounds ◽  
Extraction Methods ◽  
Water Bath ◽  
Raw Material ◽  
Total Phenolic ◽  
Total Phenolic Compounds ◽  
Ethanol Mixture ◽  
Coffee Husk ◽  
Coffea Arabica L

Coffee husks (Coffea arabica L.) are characterized by exhibiting secondary metabolites such as phenolic compounds, which can be used as raw material for obtaining bioactive compounds of interest in food. The objective of this study is to evaluate different methods for obtaining the raw material and extracting solutions of bioactive compounds from coffee husks. Water bath and ultrasound-assisted extraction methods were used, using water (100%) or ethanol (100%) or a mixture of both (1:1) as extracting solutions and the form of the raw material was in natura and dehydrated. The extracts were evaluated by their antioxidant potential using DPPH radicals, ABTS, and iron reduction (ferric reducing antioxidant power (FRAP)), and later total phenolic compounds, total flavonoids, and condensed tannins were quantified the phenolic majority compounds were identified. It was verified that the mixture of water and ethanol (1:1) showed better extraction capacity of the compounds with antioxidant activity and that both conventional (water bath) or unconventional (ultrasound) methods showed satisfactory results. Finally, a satisfactory amount of bioactive compounds was observed in evaluating the chemical composition (total phenolic compounds, total flavonoids, condensed tannins, as well as the analysis of the phenolic profile) of these extracts. Corroborating with the results of the antioxidant activities, the best extracting solution was generally the water and ethanol mixture (1:1) using a dehydrated husk and water bath as the best method, presenting higher levels of the bioactive compounds in question, with an emphasis on chlorogenic acid. Thus, it can be concluded that the use of coffee husk as raw material to obtain extracts of bioactive compounds is promising. Last, the conventional method (water bath) and the water and ethanol mixture (1:1) stood out among the methods and extracting solutions used for the dehydrated coffee husk.

scholarly journals Antioxidant properties, quantification and stability of betalains from pitaya (Hylocereus undatus) peel

2014 ◽  
Vol 45 (2) ◽  
pp. 323-328 ◽  
Author(s):  
Fernanda Robert de Mello ◽  
Claudia Bernardo ◽  
Caroline Odebrecht Dias ◽  
Luciano Gonzaga ◽  
Edna Regina Amante ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
Phenolic Compounds ◽  
Antioxidant Properties ◽  
Raw Material ◽  
High Concentration ◽  
Natural Colorant ◽  
Wide Ph Range ◽  
Hylocereus Undatus ◽  
Ph Range ◽  
Promising Source

Pitaya peel can be used as a raw material for betalains extraction. The aim of this research was to quantify phenolic compounds, antioxidant activity and betalains on pitaya peel. Furthermore, evaluate the betalains stability against various pH conditions and exposure time of heating. The results showed that pitaya peel contains phenolic compounds and presented antioxidant activity. Moreover it showed high concentration of betalains (101.04mg equivalent to betanin. 100g-1) which were stable over a wide pH range (3.2 - 7.0) and were resistant to heating (100oC) up to 10 minutes at pH range from 3.7 to 5.5. Therefore, pitaya peel is a promising source of betalains which can be applied as a natural colorant for food.

scholarly journals Intensification of the extraction process of phenolic compounds from Acorus calamus leaves

2021 ◽  
pp. 4-10
Author(s):  
Oleksiy Andryushayev ◽  
Olena Ruban ◽  
Yuliia Maslii ◽  
Inna Rusak
Keyword(s):  
Phenolic Compounds ◽  
Raw Materials ◽  
Extraction Process ◽  
Raw Material ◽  
Acorus Calamus ◽  
Optimal Conditions ◽  
Ultrasonic Action ◽  
Different Temperatures ◽  
Method Of Extraction ◽  
Temperature Time

The aim. To determine the intensified method of extraction of phenolic compounds from Acorus calamus leaves and optimal conditions for the process. Materials and methods. In order to develop the optimal intensified method of extraction samples were prepared in different conditions of raw materials-extractant ratio, temperature, time and multiplicity. As a raw materials spectrophotometrically pre-standardized Acorus calamus leaves were used. The extraction was carried out in a hermetically sealed ultrasonic extraction reactor PEX 1 (REUS, Contes, France). As the criteria of extraction efficiency were indicators of dry residue and total amount of flavonoids determined using methods described in State Pharmacopoeia of Ukraine. The amount of flavonoids was determined spectrophotometrically on a certified device Specord 200 (Analytik Jena, Germany). Results. According to our research results it was found that ultrasonic action and addition of surfactant significantly improves the efficiency of the extraction process. The optimal conditions for the process were determined. Experimentally proved that the rational raw material-extractant ratio is 1:15. Comparative study of the extraction process with different temperatures showed that the highest amount of extractives is achieved at temperature 70 °C and 45 min of duration. The optimal extraction multiplicity is 3. Conclusions. As a result of the study, the intensified extraction method for Acorus calamus leaves – re-maceration with ultrasound – was established. The conducted researches allowed to develop the method of extraction, expedient in the conditions of the modern pharmaceutical industry.

Sign in / Sign up

Export Citation Format

Share Document