scholarly journals Removal of Nitrate Ions Using Thermally and Chemically Modified Bioadsorbents

2021 ◽  
Vol 11 (18) ◽  
pp. 8455
Author(s):  
Candelaria Tejada-Tovar ◽  
Ángel Villabona-Ortíz ◽  
Ángel Darío Gonzalez-Delgado
Keyword(s):  
Adsorption Capacity ◽  
Ammonium Chloride ◽  
Batch Adsorption ◽  
Freundlich Model ◽  
Nitrate Ions ◽  
Chemically Modified ◽  
Pseudo Second Order ◽  
Kinetics Of ◽  
Nitrate Anions ◽  
Water Eutrophication

Nitrate ions are one of the causes of surface water eutrophication. In the present research, the effective adsorption of nitrate ions (NO3) on bioadsorbents prepared from yam skins (Dioscorea alata) was evaluated. The yam skin was chemically modified with ammonium chloride (NH4Cl), and biochar was prepared from the thermally modified biomass. The results were compared with commercial coal (CC). The bioadsorbents were characterized by SEM-EDS analysis, which showed that the synthesized adsorbents have a heterogeneous surface with pores. The batch adsorption tests showed that the pH has the most significant effect on the NO3 adsorption capacity when using the modified yam skin (MYP), obtaining as best conditions pH 12 and a 0.5 mm particle size with an adsorption capacity of 25.75 mg/g; the best adsorption capacity when using the carbon synthesized from yam skin (CYP) and CC was obtained at pH 2, reaching values of 36 and 33.34 mg/g, respectively. The following performance in terms of adsorption capacity was found: CYP > CC > MYP, according to Langmuir’s model. The equilibrium isotherm of NO3 adsorption on MYP and CYP was adjusted by the Freundlich model, while the Langmuir model described adsorption on CC. The kinetics of all the systems studied showed a good fit to the pseudo-first-order, pseudo-second-order and Elovich models with R2 > 0.95, suggesting a mechanism of chemical adsorption by means of species exchange between the aqueous phase and the surface of the material, with the intervention of an intraparticle diffusion stage; based on these findings, the studied biomasses reached promising adsorption capacities in the removal of nitrate anions, showing that the carbon synthesized from yam skins and modified with ammonium chloride had a remarkable behavior in comparison with commercial carbon and NH4Cl-modified yam skins.

scholarly journals Nanosized centers for mercury(II) ions adsorption on a surface of modified silica

2008 ◽  
Vol 6 (4) ◽  
pp. 581-591 ◽  
Author(s):  
Lyudmila Belyakova ◽  
Oleksandra Shvets ◽  
Diana Lyashenko
Keyword(s):  
Aqueous Medium ◽  
Batch Adsorption ◽  
Modified Silica ◽  
First Order ◽  
Chemically Modified ◽  
First Order Kinetics ◽  
Adsorption Data ◽  
Pseudo Second Order ◽  
Kinetics Of ◽  
Second Order Equations

AbstractThe present work investigates the adsorptive interactions of Hg(II) ions in aqueous medium with hydroxylated silica, aminopropylsilica and silica chemically modified by β-cyclodextrin. Batch adsorption studies were carried out with various agitation times and mercury(II) concentrations. The maximum adsorption was observed within 15–30 min of agitation. The kinetics of the interactions, tested with the model of Lagergren for pseudo-first and pseudo-second order equations, showed better agreement with first order kinetics (k1 = 3.4 ± 0.2 to 5.9 ± 0.3 min−1). The adsorption data gave good fits with Langmuir isotherms. The results have shown that β-cyclodextrin-containing adsorbent has the largest adsorption specificity to Hg(II): K L = 4125 ± 205 mmol−1. “β-cyclodextrin-NO3-” inclusion complexes with ratio 1: 1 and super molecules with composition C42H70O35 ⊎ 3 Hg(NO3)2 are formed on the surface of β-cyclodextrin-containing silica.

scholarly journals Calcium PretreatedHevea brasiliensisSawdust for Copper Removal: Batch and Column Study

2015 ◽  
Vol 2015 ◽  
pp. 1-9
Author(s):  
Swarup Biswas ◽  
Umesh Mishra
Keyword(s):  
Adsorption Capacity ◽  
Adsorption Process ◽  
Copper Ion ◽  
Packed Bed ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Packed Bed Column ◽  
Pseudo Second Order ◽  
Kinetics Of

Calcium pretreatedHevea brasiliensissawdust has been used as an effective and efficient adsorbent for the removal of copper ion from the contaminated water. Batch experiment was conducted to check the effect of pH, initial concentration, contact time, and adsorbent dose. The results conclude that adsorption capacity of adsorbent was influenced by operating parameters. Maximum adsorption capacity found from the batch adsorption process was 37.74 mg/g at pH of 5.6. Various isotherm models like Langmuir, Freundlich, and Temkin were used to compare the theoretical and experimental data, whereas the pseudo-first-order, pseudo-second-order, and intraparticle diffusion models were applied to study the kinetics of the batch adsorption process. Dynamic studies were also conducted in packed-bed column using different bed depths and the maximum adsorption capacity of 34.29 was achieved. Characterizations of the adsorbent were done by Fourier transform infrared spectroscopy, scanning electron microscope, and energy dispersive X-ray spectroscopy.

Adsorption studies of Cu(II) onto biopolymer chitosan and its nanocomposite 5%bentonite/chitosan

2016 ◽  
Vol 73 (9) ◽  
pp. 2199-2210 ◽  
Author(s):  
Hamou Moussout ◽  
Hammou Ahlafi ◽  
Mustapha Aazza ◽  
Omar Zegaoui ◽  
Charaf El Akili
Keyword(s):  
Adsorption Capacity ◽  
Active Sites ◽  
Batch Adsorption ◽  
X Ray Diffraction ◽  
X Ray ◽  
Monolayer Adsorption ◽  
Adsorption Processes ◽  
Pseudo Second Order ◽  
Nanocomposite Adsorbent ◽  
Kinetics Of

Chitosan (CS) and nanocomposite 5%bentonite/chitosan (5%Bt/CS) prepared from the natural biopolymer CS were tested to remove Cu(II) ions using a batch adsorption experiment at various temperatures (25, 35 and 45°C). X-ray diffraction, Fourier transform infrared spectroscopy, and thermogravimetric analysis/differential thermal analysis (TGA/DTA) were used in CS and the nanocomposite characterisation. This confirmed the exfoliation of bentonite (Bt) to form the nanocomposite. The adsorption kinetics of copper on both solids was found to follow a pseudo-second-order law at each studied temperature. The Cu(II) adsorption capacity increased as the temperature increased from 25 to 45°C for nanocomposite adsorbent but slightly increased for CS. The data were confronted to the nonlinear Langmuir, Freundlich and Redlich–Peterson models. It was found that the experimental data fitted very well the Langmuir isotherm over the whole temperature and concentration ranges. The maximum monolayer adsorption capacity for the Cu(II) was 404–422 mg/g for CS and 282–337 mg/g for 5%Bt/CS at 25–45°C. The thermodynamic study showed that the adsorption process was spontaneous and endothermic. The complexation of Cu(II) with NH2 and C = O groups as active sites was found to be the main mechanism in the adsorption processes.

scholarly journals Biochar of Spent Coffee Grounds as Per Se and Impregnated with TiO2: Promising Waste-Derived Adsorbents for Balofloxacin

Molecules ◽  
2021 ◽  
Vol 26 (8) ◽  
pp. 2295
Author(s):  
Marwa El-Azazy ◽  
Ahmed S. El-Shafie ◽  
Hagar Morsy
Keyword(s):  
Adsorption Capacity ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Spent Coffee Grounds ◽  
Thermal Stabilities ◽  
Coffee Grounds ◽  
Bet Analysis ◽  
Pseudo Second Order ◽  
Set Up ◽  
Adsorption Desorption

Biochars (BC) of spent coffee grounds, both pristine (SCBC) and impregnated with titanium oxide (TiO2@SCBC) were exploited as environmentally friendly and economical sorbents for the fluroquinolone antibiotic balofloxacin (BALX). Surface morphology, functional moieties, and thermal stabilities of both adsorbents were scrutinized using SEM, EDS, TEM, BET, FTIR, Raman, and TG/dT analyses. BET analysis indicated that the impregnation with TiO2 has increased the surface area (50.54 m2/g) and decreased the pore size and volume. Batch adsorption experiments were completed in lights of the experimental set-up of Plackett-Burman design (PBD). Two responses were maximized; the % removal (%R) and the adsorption capacity (qe, mg/g) as a function of four variables: pH, adsorbent dosage (AD), BALX concentration ([BALX]), and contact time (CT). %R of 68.34% and 91.78% were accomplished using the pristine and TiO2@SCBC, respectively. Equilibrium isotherms indicated that Freundlich model was of a perfect fit for adsorption of BALX onto both adsorbents. Maximum adsorption capacity (qmax) of 142.55 mg/g for SCBC and 196.73 mg/g for the TiO2@SCBC. Kinetics of the adsorption process were best demonstrated using the pseudo-second order (PSO) model. The adsorption-desorption studies showed that both adsorbents could be restored with the adsorption efficiency being conserved up to 66.32% after the fifth cycles.

scholarly journals Study of the adsorption capacity of Fe(II) dissolved in water by using a mineral rich in Manganese Dioxide (MnO2) from Colombia

DYNA ◽  
2016 ◽  
Vol 83 (196) ◽  
pp. 223-228 ◽  
Author(s):  
Jhonnathan Machado-Infante ◽  
Gustavo Ramírez-Caballero ◽  
Martha Juliana Barajas Meneses
Keyword(s):  
Aqueous Solution ◽  
Raman Spectroscopy ◽  
Water Treatment ◽  
Adsorption Capacity ◽  
Open Systems ◽  
Kinetics Of Adsorption ◽  
Equilibrium And Kinetics ◽  
Pseudo Second Order ◽  
Potential Alternative ◽  
Kinetics Of

<p>In Colombia, a mineral rich in MnO<sub>2</sub> is extracted from the mines of Mallama, Nariño. In this work we studied the adsorption capacity of this mineral for Fe(II) dissolved in aqueous solution of open systems. The characterization was done through ICP-AES, XRF and Raman spectroscopy. The effect of different pretreatments on the mineral with oxidizing agents such as KMnO<sub>4</sub> and NaClO was evaluated. Studies of equilibrium and kinetics of adsorption showed that the mechanism fits well to the Langmuir isotherm and its kinetics to a model of pseudo-second order. At the conditions studied was found that the adsorption capacity for the mineral modified with KMnO<sub>4</sub> and NaOCl were 59.209 and 51.279 mg/g respectively. It is concluded that the mineral is a potential alternative in water treatment.</p>

scholarly journals Enhanced removal of hexavalent chromium by different acid-modified biochar derived from corn straw: behavior and mechanism

2020 ◽  
Vol 81 (10) ◽  
pp. 2270-2280
Author(s):  
Yonggang Xu ◽  
Tianxia Bai ◽  
Yubo Yan ◽  
Yunfeng Zhao ◽  
Ling Yuan ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Hydrogen Ion ◽  
Corn Straw ◽  
Order Model ◽  
Freundlich Model ◽  
X Ray ◽  
Modified Biochar ◽  
Before And After ◽  
Pseudo Second Order ◽  
Kinetics Of

Abstract It is of great significance to remove Cr(VI) from water as a result of its high toxicity. Biochar from corn straw was modified by different acids (HNO3, H2SO4 and H3PO4) to remove Cr(VI) from aqueous solution. To estimate the removal mechanisms of Cr(VI) by the acid-modified biochars, batch experiments were performed in the light of contact time, Cr(VI) concentration, and pH, and the characteristics of acid-modified biochars before and after Cr(VI) adsorption were investigated by Fourier transform infrared spectra (FTIR) and X-ray photoelectron spectroscopy (XPS). The adsorption kinetics of Cr(VI) by acid-modified biochars were consistent with the pseudo-second-order model, and the adsorption isotherm obeyed the Freundlich model. Furthermore, the acid- modified biochars could supply more oxygen-containing functional groups (-COOH and -OH) as electron donor (e−) and hydrogen ion (H+) to enhance the reduction of Cr(VI) to Cr(III), resulting in enhanced removal of Cr(VI). HNO3-modified biochar exhibited the highest removal efficiency of Cr(VI). In general, the acid modifition of biochar was an effective method to increase the removal of Cr(VI).

scholarly journals Polyaspartate-Ionene/Na+-Montmorillonite Nanocomposites as Novel Adsorbent for Anionic Dye; Effect of Ionene Structure

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2843
Author(s):  
Hany El-Hamshary ◽  
Abeer S. Elsherbiny ◽  
Mohamed H. El-Newehy ◽  
Mohamed E. EL-Hefnawy
Keyword(s):  
Adsorption Isotherm ◽  
Antimicrobial Agents ◽  
Organic Pollutant ◽  
Bet Surface Area ◽  
Sodium Montmorillonite ◽  
Freundlich Model ◽  
Intraparticle Diffusion Model ◽  
Pseudo Second Order ◽  
Kinetics Of ◽  
Acid Blue

Surface modification of sodium montmorillonite (Na+-Mt) was performed using antimicrobial agents to produce an ecofriendly nanocomposite. The adsorption performance of the nanocomposite has been evaluated for the removal of Acid Blue 25 dye (AB25) as a model organic pollutant from wastewater. Sodium montmorillonite (Na+-Mt) was modified with three different ionene compounds through ion exchange, and further modified through reaction with polyaspartate to provide three ecofriendly nanocomposites (denoted ICP-1–3). The nanocomposites were characterized using FTIR, PXRD, TEM, SEM, and BET surface area. The adsorption isotherm of AB25 onto ICP-1, ICP-2 and ICP-3 was analyzed using the Langmuir, Freundlich, and Dubinin–Radushkevich (D–R) models. The adsorption isotherm was found to be best fitted by a Freundlich model. The thermodynamic parameters were calculated. The kinetics of the adsorption data were analyzed and the adsorption behavior was found to obey pseudo-second-order kinetics, and the intraparticle diffusion model. The adsorption mechanism was studied by FTIR.

scholarly journals Chitosan Grafted with Biobased 5-Hydroxymethyl-Furfural as Adsorbent for Copper and Cadmium Ions Removal

Polymers ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1173 ◽  
Author(s):  
Mariza Mone ◽  
Dimitra A. Lambropoulou ◽  
Dimitrios N. Bikiaris ◽  
George Kyzas
Keyword(s):  
Adsorption Capacity ◽  
Significant Loss ◽  
X Ray Diffraction ◽  
Freundlich Model ◽  
Hydroxymethyl Furfural ◽  
Before And After ◽  
Equilibrium Data ◽  
Best Fitting ◽  
Pseudo Second Order ◽  
Grafting From

This work investigates the application of 5-hydroxymethyl-furfural (HMF) as a grafting agent to chitosan (CS). The material produced was further modified by cross-linking. Three different derivatives were tested with molecular ratios CS/HMF of 1:1 (CS-HMF1), 2:1 (CS-HMF2) and 10:1 mol/mol (CS-HMF3)) to remove Cu2+ and Cd2+ from aqueous solutions. CS-HMF derivatives were characterized both before, and after, metal ions adsorption by using scanning electron microscopy (SEM), as well as Fourier-transform infrared (FTIR) spectroscopy thermogravimetric analysis (TGA), and X-Ray diffraction analysis (XRD). The CS-HMF derivatives were tested at pH = 5 and showed higher adsorption capacity with the increase of temperature. Also, the equilibrium data were fitted to Langmuir (best fitting) and Freundlich model, while the kinetic data to pseudo-first (best fitting) and pseudo-second order equations. The Langmuir model fitted better (higher R2) the equilibrium data than the Freundlich equation. By increasing the HMF grafting from 130% (CS-HMF1) to 310% (CS-HMF3), an increase of 24% (26 m/g) was observed for Cu2+ adsorption and 19% (20 mg/g) for Cd2+. By increasing from T = 25 to 65 °C, an increase of the adsorption capacity (metal uptake) was observed. Ten reuse cycles were successfully carried out without significant loss of adsorption ability. The reuse potential was higher of Cd2+, but more stable desorption reuse ability during all cycles for Cu2+.

Adsorption Equilibrium and Kinetics of Copper from Aqueous Solutions on Steel Slag

2011 ◽  
Vol 354-355 ◽  
pp. 33-36
Author(s):  
Jian Yun Li ◽  
Quan Xian Hua ◽  
Jun Ling Niu ◽  
Jian Wei Tang ◽  
Ke Xu
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Equilibrium ◽  
Steel Slag ◽  
Adsorption Rate ◽  
Batch Adsorption ◽  
Equilibrium And Kinetics ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Adsorption Equilibrium Data ◽  
Kinetics Of

The adsorption of copper in aqueous solutions by steel slag was studied in batch adsorption experiments. The adsorption equilibrium data fitted best with Langmuir and Freundlich equations. The adsorption was preferential type. A comparison of the kinetics models on the apparent adsorption rate showed that the adsorption system was best described by the pseudo-second-order kinetics. The adsorption rate was controlled by both liquid film diffusion and intraparticle dispersion.

Study on Adsorption of U(VI) From Aqueous Solution by Activated MgO

2017 ◽  
Author(s):  
Qingqing Liu ◽  
Xiaoyan Li
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Adsorption Process ◽  
Removal Rate ◽  
Freundlich Isotherm ◽  
Batch System ◽  
15Mg Dose ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Kinetics Of

The activated MgO was synthesized by microwave homo-precipitator method and characterized by SEM, EDS and FT-IR methods. It was used to adsorption of U(VI) from aqueous solution with batch system. The paper discussed the effect of pH, temperature, contact time, adsorbent dose and initial U(VI) concentration on the adsorption. The results showed that activated MgO has good adsorption capacity for U(VI), the removal rate and equilibrium adsorption capacity reached 83.5% and 84.04mg·g−1 at pH 5.0, 15mg dose and 313K,respectively. The adsorption kinetics of U(VI) onto activated MgO were better fitted with pseudo-second-order kinetic.The adsorption isotherm data were fitted well to Freundlich isotherm model.The thermodynamic parameters showed that the adsorption process is endothermic and spontaneous.

Sign in / Sign up

Export Citation Format

Share Document