scholarly journals Ionic Conductivity and Dielectric Relaxation of NASICON Superionic Conductors at the Near-Cryogenic Regime

2021 ◽  
Vol 11 (18) ◽  
pp. 8432
Author(s):  
Athanasios Tiliakos ◽  
Mihaela Iordache ◽  
Adriana Marinoiu
Keyword(s):  
Ionic Conductivity ◽  
Crystal Lattice ◽  
Elevated Temperatures ◽  
Lattice Structure ◽  
Processing Parameters ◽  
Superionic Conductors ◽  
Temperature Zone ◽  
Conventional Solid State Reaction ◽  
Permittivity Measurements ◽  
Made In

With a crystal lattice structure first characterized in the 1970s, NASICON sodium-based superionic conductors have recently found renewed interest as solid electrolytes in sodium-ion and seawater flow batteries due to their exceptional ionic conductivity being on the same scale as liquid electrolytes. Since sodium ions in the crystal lattice move among interstitial positions through site-specific bottlenecks, the overall conductivity is strongly dependent on the NASICON composition. In this work, we report on the synthesis protocols and processing parameters of Na3Zr2Si2PO12 prepared from Na2CO3, SiO2, ZrO2, and NH4H2PO4 precursors by the conventional solid-state reaction (SSR) route. We critically evaluated important observations made in the extended literature on the topic including: (i) the importance of precursor particle size concerning the SSR synthesis, focusing on effective ball-milling protocols; and (ii) the onset of excess zirconia contamination, expanding on the effects of both thermal and pressure processing—the latter often overlooked in the available literature. In approaching the cryogenic regime, the dataset availability concerning ionic conductivity and dielectric permittivity measurements for NASICON was extended, starting from elevated temperatures at 200 °C and reaching into the very low temperature zone at −100 °C.

Rapid Crystallization and Kinetic Freezing of Site-Disorder in the Lithium Superionic Argyrodite Li6PS5Br

2019 ◽  
Author(s):  
Ajay Gautam ◽  
Marcel Sadowski ◽  
Nils Prinz ◽  
Henrik Eickhoff ◽  
Nicolo Minafra ◽  
...  
Keyword(s):  
Elevated Temperatures ◽  
Synthesis Method ◽  
Reaction Times ◽  
Ionic Conductivities ◽  
Ionic Transport ◽  
High Energy ◽  
Superionic Conductors ◽  
Rapid Crystallization ◽  
Site Disorder ◽  
Fast Cooling

<p>Lithium argyrodite superionic conductors are currently being investigated as solid electrolytes for all-solid-state batteries. Recently, in the lithium argyrodite Li<sub>6</sub>PS<sub>5</sub>X (X = Cl, Br, I), a site-disorder between the anionsS<sup>2–</sup>and X<sup>–</sup>has been observed, which strongly affects the ionic transport and appears to be a function of the halide present. In this work, we show how such disorder in Li<sub>6</sub>PS<sub>5</sub>Br can be engineered <i>via</i>the synthesis method. By comparing fast cooling (<i>i.e. </i>quenching) to more slowly cooled samples, we find that anion site-disorder is higher at elevated temperatures, and that fast cooling can be used to kinetically trap the desired disorder, leading to higher ionic conductivities as shown by impedance spectroscopy in combination with <i>ab-initio</i>molecular dynamics. Furthermore, we observe that after milling, a crystalline lithium argyrodite can be obtained within one minute of heat treatment. This rapid crystallization highlights the reactive nature of mechanical milling and shows that long reaction times with high energy consumption are not needed in this class of materials. The fact that site-disorder induced <i>via</i>quenching is beneficial for ionic transport provides an additional approach for the optimization and design of lithium superionic conductors.</p>

Conductivity-Temperature Dependent Studies on MG49 Doped Lithium Triflate Salt

2015 ◽  
Vol 1107 ◽  
pp. 181-186
Author(s):  
Zaidatul Salwa Mahmud ◽  
N.H.M. Zaki ◽  
R. Zakaria ◽  
Mohamad Faizul Yahya ◽  
Ab Malik Marwan Ali
Keyword(s):  
Ionic Conductivity ◽  
Elevated Temperatures ◽  
Ethylene Carbonate ◽  
Ionic Mobility ◽  
Ionic Conductors ◽  
X Ray Diffraction ◽  
Temperature Dependent ◽  
Lithium Triflate ◽  
Mobility Of Charge Carriers ◽  
Solution Cast

This paper reports on the conductivity-temperature studies of gel polymer electrolytes (GPEs) based on 49% poly (methyl methacrylate) grafted-natural rubber (MG49) doped with lithium triflate salt (LiTf) and plasticized with ethylene carbonate (EC). The GPE films are prepared by solution cast technique. The X-ray diffraction (XRD) studies reveal the polymer electrolyte systems are amorphous. AC impedance spectroscopy is carried out in the temperature range between 303 and 373 K. The magnitudes of conductivity observed are strongly dependent on salt concentration and temperature. The high ionic conductivity at elevated temperatures of GPE is attributed to the high ionic mobility of charge carriers. The ionic migration is seen to follow the VTF behavior and approaches to Arrhenius rule at high and low at temperature. Ionic conductivity relaxation appears to be a characteristic of the ionic polarization and the modulus formalism studies confirmed the GPEs in the present investigation are ionic conductors.

scholarly journals Recent advances in the electrochemical construction of heterocycles

2014 ◽  
Vol 10 ◽  
pp. 2858-2873 ◽  
Author(s):  
Robert Francke
Keyword(s):  
Heterocyclic Compounds ◽  
Elevated Temperatures ◽  
Ring Formation ◽  
Environmentally Benign ◽  
Heterocyclic Chemistry ◽  
Ambient Conditions ◽  
Recent Developments ◽  
Strong Acids ◽  
Selection Of ◽  
Made In

Due to the fact that the major portion of pharmaceuticals and agrochemicals contains heterocyclic units and since the overall number of commercially used heterocyclic compounds is steadily growing, heterocyclic chemistry remains in the focus of the synthetic community. Enormous efforts have been made in the last decades in order to render the production of such compounds more selective and efficient. However, most of the conventional methods for the construction of heterocyclic cores still involve the use of strong acids or bases, the operation at elevated temperatures and/or the use of expensive catalysts and reagents. In this regard, electrosynthesis can provide a milder and more environmentally benign alternative. In fact, numerous examples for the electrochemical construction of heterocycles have been reported in recent years. These cases demonstrate that ring formation can be achieved efficiently under ambient conditions without the use of additional reagents. In order to account for the recent developments in this field, a selection of representative reactions is presented and discussed in this review.

Surface Modification of Solid Electrolytes for Advanced Chemical Sensors.

1988 ◽  
Vol 135 ◽  
Author(s):  
Werner Weppner
Keyword(s):  
Surface Modification ◽  
Solid State ◽  
Ionic Conductivity ◽  
Process Control ◽  
Environmental Protection ◽  
Chemical Sensors ◽  
Solid Electrolytes ◽  
Elevated Temperatures ◽  
High Ionic Conductivity ◽  
Ion Conductors

Solid State ion conductors are sucessfully employed in chemical sensors for gases such as oxygen for process control and environmental protection. The application requires elevated temperatures for sufficiently high ionic conductivity and is restricted to a few gases for which suitable solid electrolytes are available.

PREDICTION OF PEEK RESIN PROPERTIES FOR PROCESSING MODELING USING MOLECULAR DYNAMICS

2021 ◽  
Author(s):  
KHATEREH KASHMARI ◽  
PRATHAMESH DESHPANDE ◽  
SAGAR PATIL ◽  
SAGAR SHAH ◽  
MARIANNA MAIARU ◽  
...  
Keyword(s):  
Molecular Dynamics ◽  
Residual Stresses ◽  
Crystallization Kinetics ◽  
Material Properties ◽  
Elevated Temperatures ◽  
Processing Parameters ◽  
Thermomechanical Properties ◽  
Volumetric Shrinkage ◽  
Processing Temperature ◽  
Wide Range

Polymer Matrix Composites (PMCs) have been the subject of many recent studies due to their outstanding characteristics. For the processing of PMCs, a wide range of elevated temperatures is typically applied to the material, leading to the development of internal residual stresses during the final cool-down step. These residual stresses may lead to net shape deformations or internal damage. Also, volumetric shrinkage, and thus additional residual stresses, could be created during crystallization of the semi-crystalline thermoplastic matrix. Furthermore, the thermomechanical properties of semi-crystalline polymers are susceptible to the crystallinity content, which is tightly controlled by the processing parameters (processing temperature, temperature holding time) and material properties (melting and crystallization temperatures). Hence, it is vital to have a precise understanding of crystallization kinetics and its impact on the final component's performance to accurately predict induced residual stresses during the processing of these materials. To enable multi-scale process modeling of thermoplastic composites, molecular-level material properties must be determined for a wide range of crystallinity levels. In this study, the thermomechanical properties and volumetric shrinkage of the thermoplastic Poly Ether Ether Ketone (PEEK) resin are predicted as a function of crystallinity content and temperature using molecular dynamics (MD) modeling. Using crystallization-kinetics models, the thermo-mechanical properties are directly related to processing time and temperature. This research can ultimately predict the residual stress evolution in PEEK composites as a function of processing parameters.

Increasing the Efficacy and Extending the Effective Application Period of a Granular Turf Bioherbicide by Covering with Jute Fabric

2009 ◽  
Vol 23 (4) ◽  
pp. 524-530 ◽  
Author(s):  
Mohammed H. Abu-Dieyeh ◽  
Alan K. Watson
Keyword(s):  
Elevated Temperatures ◽  
Ground Cover ◽  
Sclerotinia Minor ◽  
Jute Fabric ◽  
Effective Application ◽  
Jute Fibers ◽  
Application Rates ◽  
Warm Summer ◽  
Favorable Conditions ◽  
Made In

Progress in bioherbicide development has been hindered by the strict moisture and temperature requirements of the living active ingredient. Application of a jute fabric to areas treated with aSclerotinia minorgranular bioherbicide improved broadleaf weed control and broadened the effective application period to include the warm summer season. When turfgrass plots treated with the bioherbicide were covered with burlap fabric for 3 d, broadleaf weed (dandelion, white clover, broadleaf plantain, buckhorn plantain, ground ivy, and prostrate knotweed) control was greatly enhanced. The cover was made of natural jute fibers that retained water but had sufficient transparency to allow 33% light penetration for continued growth of the grass. Virulence of the bioherbicide was maintained under elevated temperatures that would otherwise reduce efficacy. The bioherbicide was ineffective in the summer unless covered, but dandelion density, broadleaf weed ground cover, and dandelion survival were all reduced by the bioherbicide when plots were covered, even if applications were made in July. The efficacy of the bioherbicide was also enhanced under favorable conditions, and covering permitted reduced application rates without loss of efficacy. When applied at a rate of 20 g/m2and covered,S. minorgranules exerted significantly greater biocontrol of dandelion than 40 g/m2without covering. Covering for up to 5 d did not cause any adverse effects on the turfgrass. This approach may overcome one obstacle to the commercialization of theSclerotinia minorbioherbicide, permitting its deployment under challenging environmental conditions.

scholarly journals Preparation of Fe-intercalated Graphite Based on Coal Tailings, Dimensional Structure

2015 ◽  
Vol 4 (3) ◽  
Author(s):  
Irfan Gustian ◽  
Eka Angasa ◽  
Dwi Agustini ◽  
Evi Maryanti ◽  
Dyiah Fitriani
Keyword(s):  
Crystal Lattice ◽  
Lattice Structure ◽  
Dimensional Structure ◽  
Thermal Method ◽  
Activation Process ◽  
Acid Activation ◽  
X Ray Diffraction ◽  
Intercalated Graphite ◽  
Coal Tailings ◽  
Mining Coal

<p>Intercalated graphite from coal tailings have been modified through the intercalation of iron. Coal tailings which is a byproduct of the destruction process and flakes washing results from mining coal. Intercalation of iron goal is to improve the physical properties of graphite and modifying sizes of crystal lattice structure with thermal method. Modification process begins with the carbonization of coal tailings at 500ºC and activated with phosphoric acid. Activation process has done by pyrolysis at 700ºC. The results of pyrolysis was soaked in mineral oil for 24 hours, then pyrolysis again with variations in temperature 800°C and 900ºC for 1 hour and subsequent intercalation iron at 1% and 2%. Material before activated, after activated, and the results of pyrolysis still indicates order nano: 29, 25 and 36 nm respectively. X-ray diffraction characterization results indicate that change in the structure, the sizes crystal lattice structure of the material The greater the concentration of iron was added, the resulting peak at 2θ = 33 and 35 also will be more sharply. The results of SEM showed different morphologies from each treatment.</p>

A comparative study of Li10.35Ge1.35P1.65S12 and Li10.5Ge1.5P1.5S12 superionic conductors

2020 ◽  
Vol 13 (06) ◽  
pp. 2050031
Author(s):  
Yue Jiang ◽  
Zhiwei Hu ◽  
Ming’en Ling ◽  
Xiaohong Zhu
Keyword(s):  
Ionic Conductivity ◽  
Room Temperature ◽  
Ionic Conductivities ◽  
Lithium Ion ◽  
Lattice Parameter ◽  
Superionic Conductors ◽  
Chemical Compositions ◽  
Temperature Conductivity ◽  
Room Temperature Conductivity ◽  
Ion Conductor

Since the lithium-ion conductor Li[Formula: see text]GeP2S[Formula: see text] (LGPS) with a super high room-temperature conductivity of 12[Formula: see text]mS/cm was first reported in 2011, sulfide-type solid electrolytes have been paid much attention. It was suggested by Kwon et al. [J. Mater. Chem. A 3, 438 (2015)] that some excess lithium ions in LGPS, namely, Li[Formula: see text]Ge[Formula: see text] P[Formula: see text]S[Formula: see text], could further improve their ionic conductivities, and the highest conductivity of 14.2[Formula: see text]mS/cm was obtained at [Formula: see text] though a larger lattice parameter that occurred at [Formula: see text]. In this study, we focus on these two different chemical compositions of LGPS with [Formula: see text] and [Formula: see text], respectively. Both samples were prepared using the same experimental process. Their lattice parameter, microstructure and room-temperature ionic conductivity were compared in detail. The results show that the main phase is the tetragonal LGPS phase but with a nearly identical amount of orthorhombic LGPS phase coexisting in both samples. Bigger lattice parameters, larger grain sizes and higher ionic conductivities are simultaneously achieved in Li[Formula: see text]Ge[Formula: see text]P[Formula: see text]S[Formula: see text] ([Formula: see text]), exhibiting an ultrahigh room-temperature ionic conductivity of 18.8[Formula: see text]mS/cm.

Sign in / Sign up

Export Citation Format

Share Document