scholarly journals Laser Technology for the Formation of Bioelectronic Nanocomposites Based on Single-Walled Carbon Nanotubes and Proteins with Different Structures, Electrical Conductivity and Biocompatibility

2021 ◽  
Vol 11 (17) ◽  
pp. 8036
Author(s):  
Alexander Yu. Gerasimenko ◽  
Uliana E. Kurilova ◽  
Irina A. Suetina ◽  
Marina V. Mezentseva ◽  
Aleksandr V. Zubko ◽  
...  

A laser technology for creating nanocomposites from alternating layers of albumin/collagen proteins with two types of single-walled carbon nanotubes (SWCNT) at concentrations of 0.001 and 0.01 wt.% was proposed. For this purpose, a setup with a diode laser (810 nm) and feedback system for controlling the temperature of the area affected by the radiation was developed. Raman spectroscopy was used to determine a decrease in the defectiveness of SWCNT with an increase in their concentration in the nanocomposite due to the formation of branched 3D networks with covalent bonds between nanotubes. It was revealed that adhesion of proteins to branched 3D networks from SWCNT occurred. The specific electrical conductivity of nanocomposites based on large SWCNT nanotubes was 3.2 and 4.3 S/m compared to that for nanocomposites based on small SWCNT with the same concentrations—1.1 and 1.8 S/m. An increase in the concentration and size of nanotubes provides higher porosity of nanocomposites. For small SWCNT-based nanocomposites, a significant number of mesopores up to 50 nm in size and the largest specific surface area and specific pore volume were found. Nanocomposites with small SWCNT (0.001 wt.%) provided the best cardiac fibroblast viability. Such technology can be potentially used to create bioelectronic components or scaffolds for heart tissue engineering.

2011 ◽  
Vol 287-290 ◽  
pp. 2443-2446
Author(s):  
Su Min Wang ◽  
Qi Guan Wang ◽  
Jian Ping Li ◽  
Hiroshi Moriyama ◽  
Wei Xing Chen

Thin films of single-walled carbon nanotubes (SWNTs) attached to an ITO surface (SAM–ITO) self-assembled in advance from 3-aminopropyltrimethoxysilane through amide covalent bonds were prepared. The SWNTs were safely obtained via a two-step process assisted by microwave radiation, which were soluble in aqueous and organic media. However, the CV behavior of SAM–ITO in acidic aqueous systems showed unexpected oxidation signals due to redox reactions involving the defects and sidewalls of soluble functionalized SWNTs. It was found that, after a conductive polymer of polyaniline was chemically incorporated onto the surface of the SWNTs by using electropolymerization method, the CV data showed a single reversible redox couple, which indicated a more stable state.


Nanomaterials ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 1113 ◽  
Author(s):  
Bogumiła Kumanek ◽  
Tomasz Wasiak ◽  
Grzegorz Stando ◽  
Paweł Stando ◽  
Dariusz Łukowiec ◽  
...  

Despite the widespread use of sonication for individualization of nanomaterials, its destructive nature is rarely acknowledged. In this study, we demonstrated how exposure of the material to a hostile sound wave environment can be limited by the application of another preprocessing step. Single-walled carbon nanotubes (CNTs) were initially ground in a household coffee grinder, which enabled facile deagglomeration thereof. Such a simple approach enabled us to obtain high-quality CNT dispersion at reduced sonication time. Most importantly, electrical conductivity of free-standing films prepared from these dispersion was improved almost fourfold as compared with unground material eventually reaching 1067 ± 34 S/cm. This work presents a new approach as to how electrical properties of nanocarbon ensembles may be enhanced without the application of doping agents, the presence of which is often ephemeral.


2011 ◽  
Vol 306-307 ◽  
pp. 1182-1185
Author(s):  
Hong Mei Niu

Nanocomposites of single-walled carbon nanotubes modified polypyrrole (PPy/SWNTs) were synthesized successfully by in situ oxidative polymerization method in the FeCl3·6H2O solution. The morphological structure, electrical conductivity and thermal stability of the nanocomposites were characterized by TEM, SEM, FTIR and TGA. The PPy/SWNTs were 50-100 nm in diameter of PPy coating uniformly on the surface of the SWNTs. FTIR spectra revealed the presence of covalently interaction between the PPy and the carbon nanotubes. The electrical conductivity of PPy/SWNTs composite and pure PPy were 93 and 8.0×10-3 S/cm, respectively. Meanwhile, the PPy/SWNTs composites possessed higher thermal stability (65.9 wt. % weight loss at 600 °C) compared to pure PPy (81.2 wt. % weight loss at 600°C), the content of SWNTs was 15.3 wt. %.


2008 ◽  
Vol 20 (9) ◽  
pp. 3120-3126 ◽  
Author(s):  
Maxim N. Tchoul ◽  
Warren T. Ford ◽  
Mai L. P. Ha ◽  
Israel Chavez-Sumarriva ◽  
Brian P. Grady ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document