scholarly journals Effects of Cellulose Nanocrystal and Inorganic Nanofillers on the Morphological and Mechanical Properties of Digital Light Processing (DLP) 3D-Printed Photopolymer Composites

2021 ◽  
Vol 11 (15) ◽  
pp. 6835
Author(s):  
Sang-U Bae ◽  
Birm-June Kim
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Mechanical Strength ◽  
Stress Transfer ◽  
Cellulose Nanocrystal ◽  
Morphological Properties ◽  
Precipitated Calcium Carbonate ◽  
Digital Light Processing ◽  
3D Printed ◽  
Cellulose Nanomaterials

Photopolymer composites filled with cellulose nanocrystal (CNC) and/or inorganic nanofillers were fabricated by using digital light processing (DLP) 3D printing. To investigate the effects of different CNC lyophilization concentrations and behaviors of CNC particles in the photopolymer composites, morphological and mechanical properties were analyzed. CNC loading levels affected the morphological and mechanical properties of the filled composites. Better CNC dispersion was seen at a lower lyophilization concentration, and the highest mechanical strength was observed in the 0.25 wt% CNC-filled composite. Furthermore, nano-precipitated calcium carbonate (nano-PCC) and nanoclay were added to photocurable resins, and then the effect of inorganic nanofillers on the morphological and mechanical properties of the composites were evaluated. By analyzing the morphological properties, the stress transfer mechanism of nano-PCC and nanoclay in the photopolymer composites was identified and related models were presented. These supported the improved mechanical strength of the composites filled with CNC, nano-PCC, and nanoclay. This study suggested a new approach using wood-derived cellulose nanomaterials and inorganic nanofillers as effective fillers for DLP 3D printing.

Effects of post-curing conditions on mechanical properties of 3D printed clear dental aligners

2020 ◽  
Vol 26 (8) ◽  
pp. 1337-1344 ◽  
Author(s):  
Prashant Jindal ◽  
Mamta Juneja ◽  
Divya Bajaj ◽  
Francesco Luke Siena ◽  
Philip Breedon
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Mechanical Strength ◽  
Financial Burden ◽  
Experimental Studies ◽  
Cost Savings ◽  
Time Duration ◽  
Content Type ◽  
Curing Conditions ◽  
3D Printed

Purpose 3D printing techniques have been widely used for manufacturing complex parts for various dental applications. For achieving suitable mechanical strength, post-cure processing is necessary, where the relative time duration and temperature specification also needs to be defined. The purpose of this study/paper is to assess the effects of post curing conditions and mechanical properties of 3D printed clear dental aligners Design/methodology/approach Dental long-term clear resin material has been used for 3D printing of dental aligners using a Formlabs 3D printer for direct usage on patients. Post-curing conditions have been varied, all of which have been subjected to mechanical compression loading of 1,000 N to evaluate the curing effects on the mechanical strength of the aligners. Findings The experimental studies provide significant insight into both temperatures and time durations that could provide sufficient compressive mechanical strength to the 3D printed clear dental aligners. It was observed that uncured aligners deformed plastically with large deformations under the loading conditions, whereas aligners cured between 400°C–800°C for 15–20 min deformed elastically before fragmenting into pieces after safely sustaining higher compressive loads between 495 N and 666 N. The compressive modulus ratio for cured aligners ranged between 4.46 and 5.90 as compared to uncured aligners. For shorter cure time durations and lower temperature conditions, an appropriate elevated compressive strength was also achieved. Originality/value Based on initial assessments by dental surgeons, suitable customised clear aligners can be designed, printed and cured to the desired levels based on patient’s requirements. This could result in time, energy and unit production cost savings, which ultimately would help to alleviate the financial burden placed on both the health service and their patients.

scholarly journals DLP 3D Printing Meets Lignocellulosic Biopolymers: Carboxymethyl Cellulose Inks for 3D Biocompatible Hydrogels

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1655 ◽  
Author(s):  
Giuseppe Melilli ◽  
Irene Carmagnola ◽  
Chiara Tonda-Turo ◽  
Fabrizio Pirri ◽  
Gianluca Ciardelli ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Carboxymethyl Cellulose ◽  
Biomedical Applications ◽  
Digital Light Processing ◽  
Chemically Modified ◽  
Significant Step ◽  
3D Printed ◽  
Biomedical Field

The development of new bio-based inks is a stringent request for the expansion of additive manufacturing towards the development of 3D-printed biocompatible hydrogels. Herein, methacrylated carboxymethyl cellulose (M-CMC) is investigated as a bio-based photocurable ink for digital light processing (DLP) 3D printing. CMC is chemically modified using methacrylic anhydride. Successful methacrylation is confirmed by 1H NMR and FTIR spectroscopy. Aqueous formulations based on M-CMC/lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) photoinitiator and M-CMC/Dulbecco’s Modified Eagle Medium (DMEM)/LAP show high photoreactivity upon UV irradiation as confirmed by photorheology and FTIR. The same formulations can be easily 3D-printed through a DLP apparatus to produce 3D shaped hydrogels with excellent swelling ability and mechanical properties. Envisaging the application of the hydrogels in the biomedical field, cytotoxicity is also evaluated. The light-induced printing of cellulose-based hydrogels represents a significant step forward in the production of new DLP inks suitable for biomedical applications.

scholarly journals 3D printed mesh reinforcements enhance the mechanical properties of electrospun scaffolds

2019 ◽  
Vol 23 (1) ◽  
Author(s):  
Nicholas W. Pensa ◽  
Andrew S. Curry ◽  
Paul P. Bonvallet ◽  
Nathan F. Bellis ◽  
Kayla M. Rettig ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Extracellular Matrix ◽  
3D Printing ◽  
Mechanical Strength ◽  
Bone Graft ◽  
Clinical Applications ◽  
Foreign Body Response ◽  
Poly Lactic Acid ◽  
Electrospun Scaffolds ◽  
3D Printed

Abstract Background There is substantial interest in electrospun scaffolds as substrates for tissue regeneration and repair due to their fibrous, extracellular matrix-like composition with interconnected porosity, cost-effective production, and scalability. However, a common limitation of these scaffolds is their inherently low mechanical strength and stiffness, restricting their use in some clinical applications. In this study we developed a novel technique for 3D printing a mesh reinforcement on electrospun scaffolds to improve their mechanical properties. Methods A poly (lactic acid) (PLA) mesh was 3D-printed directly onto electrospun scaffolds composed of a 40:60 ratio of poly(ε-caprolactone) (PCL) to gelatin, respectively. PLA grids were printed onto the electrospun scaffolds with either a 6 mm or 8 mm distance between the struts. Scanning electron microscopy was utilized to determine if the 3D printing process affected the archtitecture of the electrospun scaffold. Tensile testing was used to ascertain mechanical properties (strength, modulus, failure stress, ductility) of both unmodified and reinforced electrospun scaffolds. An in vivo bone graft model was used to assess biocompatibility. Specifically, reinforced scaffolds were used as a membrane cover for bone graft particles implanted into rat calvarial defects, and implant sites were examined histologically. Results We determined that the tensile strength and elastic modulus were markedly increased, and ductility reduced, by the addition of the PLA meshes to the electrospun scaffolds. Furthermore, the scaffolds maintained their matrix-like structure after being reinforced with the 3D printed PLA. There was no indication at the graft/tissue interface that the reinforced electrospun scaffolds elicited an immune or foreign body response upon implantation into rat cranial defects. Conclusion 3D-printed mesh reinforcements offer a new tool for enhancing the mechanical strength of electrospun scaffolds while preserving the advantageous extracellular matrix-like architecture. The modification of electrospun scaffolds with 3D-printed reinforcements is expected to expand the range of clinical applications for which electrospun materials may be suitable.

3D Printed Polyurethane Reinforced Graphene Nanoplatelets

2021 ◽  
Vol 1025 ◽  
pp. 47-52
Author(s):  
Denesh Mohan ◽  
Mohd Shaiful Sajab ◽  
Saiful Bahari Bakarudin ◽  
Rasidi Bin Roslan ◽  
Hatika Kaco
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Interfacial Adhesion ◽  
Morphological Analysis ◽  
Chemical Interaction ◽  
Uv Curing ◽  
Graphene Nanoplatelets ◽  
Digital Light Processing ◽  
3D Printed ◽  
Strength And Stiffness

3D printing allows industries to scale the development from rapid prototyping to mass production in an easier manner. However, a typical photopolymers resin for stereolithography 3D printing possesses lower mechanical properties which incapable to meet certain industrial requirements for high impact applications. Hence, 0.1 to 2.0 wt.% of graphene nanoplatelets (GnP) were incorporated into photo-curable polyurethane (PU) based resin through digital light processing (DLP) 3D printing to evaluate its reinforcement effect. FTIR spectrum proves that significant characteristics of PU were still dominant upon the addition of GnP, indicating there was no chemical interaction between PU and GnP. The interfacial adhesion and the homogeneity of GnP in PU matrix were investigated through morphological analysis and the strength and stiffness of the 3D-printed composites. Results shows, tensile strength and Young’s Modulus of the PU/1%GnP composite had an increment of 21% and 24%, respectively when compared to neat PU resin. However, further increment of GnP reduced the mechanical properties because of interruption in UV curing during printing, hence leading to interfacial voids and defects on the printed specimens.

scholarly journals Extrusion Based 3D Printing of Sustainable Biocomposites from Biocarbon and Poly(trimethylene terephthalate)

Molecules ◽  
2021 ◽  
Vol 26 (14) ◽  
pp. 4164
Author(s):  
Elizabeth Diederichs ◽  
Maisyn Picard ◽  
Boon Peng Chang ◽  
Manjusri Misra ◽  
Amar Mohanty
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Surface Finish ◽  
Three Dimensional ◽  
Morphological Properties ◽  
Great Promise ◽  
Structural Components ◽  
Computer Aided ◽  
Trimethylene Terephthalate ◽  
Optimal Quantity

Three-dimensional (3D) printing manufactures intricate computer aided designs without time and resource spent for mold creation. The rapid growth of this industry has led to its extensive use in the automotive, biomedical, and electrical industries. In this work, biobased poly(trimethylene terephthalate) (PTT) blends were combined with pyrolyzed biomass to create sustainable and novel printing materials. The Miscanthus biocarbon (BC), generated from pyrolysis at 650 °C, was combined with an optimized PTT blend at 5 and 10 wt % to generate filaments for extrusion 3D printing. Samples were printed and analyzed according to their thermal, mechanical, and morphological properties. Although there were no significant differences seen in the mechanical properties between the two BC composites, the optimal quantity of BC was 5 wt % based upon dimensional stability, ease of printing, and surface finish. These printable materials show great promise for implementation into customizable, non-structural components in the electrical and automotive industries.

scholarly journals Mechanical Properties and Biocompatibility of Urethane Acrylate-Based 3D-Printed Denture Base Resin

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 822
Author(s):  
Jy-Jiunn Tzeng ◽  
Tzu-Sen Yang ◽  
Wei-Fang Lee ◽  
Hsuan Chen ◽  
Hung-Ming Chang
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Flexural Modulus ◽  
Measurement Data ◽  
Uv Exposure ◽  
Control Group ◽  
Urethane Acrylate ◽  
Shore Hardness ◽  
Digital Light Processing ◽  
Denture Base

In this study, five urethane acrylates (UAs), namely aliphatic urethane hexa-acrylate (87A), aromatic urethane hexa-acrylate (88A), aliphatic UA (588), aliphatic urethane triacrylate diluted in 15% HDD (594), and high-functional aliphatic UA (5812), were selected to formulate five UA-based photopolymer resins for digital light processing (DLP)-based 3D printing. Each UA (40 wt%) was added and blended homogenously with ethoxylated pentaerythritol tetraacrylate (40 wt%), isobornyl acrylate (12 wt%), diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide (3 wt%), and a pink acrylic (5 wt%). Each UA-based resin specimen was designed using CAD software and fabricated using a DLP 3D printer to specific dimensions. Characteristics, mechanical properties, and cytotoxicity levels of these designed UA-based resins were investigated and compared with a commercial 3D printing denture base acrylic resin (BB base) control group at different UV exposure times. Shore hardness-measurement data and MTT assays were analyzed using a one-way analysis of variance with Bonferroni’s post hoc test, whereas viscosity, maximum strength, and modulus were analyzed using the Kruskal–Wallis test (α = 0.05). UA-based photopolymer resins with tunable mechanical properties were successfully prepared by replacing the UA materials and the UV exposure times. After 15 min of UV exposure, the 5812 and 594 groups exhibited higher viscosities, whereas the 88A and 87A groups exhibited lower viscosities compared with the BB base group. Maximum flexural strength, flexural modulus, and Shore hardness values also revealed significant differences among materials (p < 0.001). Based on MTT assay results, the UA-based photopolymer resins were nontoxic. In the present study, mechanical properties of the designed photopolymer resins could be adjusted by changing the UA or UV exposure time, suggesting that aliphatic urethane acrylate has good potential for use in the design of printable resins for DLP-type 3D printing in dental applications.

Mechanical Properties of 3D-Printed Wood-Plastic Composites

2018 ◽  
Vol 777 ◽  
pp. 499-507 ◽  
Author(s):  
Ossi Martikka ◽  
Timo Kärki ◽  
Qing Ling Wu
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
3D Printing ◽  
Impact Strength ◽  
Polylactic Acid ◽  
Wood Plastic Composite ◽  
Wood Plastic Composites ◽  
Plastic Composite ◽  
Plastic Composites ◽  
3D Printed

3D printing has rapidly become popular in both industry and private use. Especially fused deposition modeling has increased its popularity due to its relatively low cost. The purpose of this study is to increase knowledge in the mechanical properties of parts made of wood-plastic composite materials by using 3D printing. The tensile properties and impact strength of two 3D-printed commercial wood-plastic composite materials are studied and compared to those made of pure polylactic acid. Relative to weight –mechanical properties and the effect of the amount of fill on the properties are also determined. The results indicate that parts made of wood-plastic composites have notably lower tensile strength and impact strength that those made of pure polylactic acid. The mechanical properties can be considered sufficient for low-stress applications, such as visualization of prototypes and models or decorative items.

scholarly journals Ethephon Improved Stalk Strength of Maize (Zea Mays L.) Mainly through Altering Internode Morphological Traits to Modulate Mechanical Properties under Field Conditions

Agronomy ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 186 ◽  
Author(s):  
Yushi Zhang ◽  
Yubin Wang ◽  
Delian Ye ◽  
Wei Wang ◽  
Xinming Qiu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mechanical Strength ◽  
Structural Equation ◽  
Dry Matter ◽  
Field Experiments ◽  
Unit Length ◽  
Bending Moment ◽  
Equation Model ◽  
Morphological Properties ◽  
Stalk Strength

Stalk strength is critical for reducing maize stalk lodging and maintaining grain yield. Ethephon has been widely applied to molding compact plant-type to reduce the lodging risk in maize production. However, there is little information on how ethephon regulates internode mechanical properties to improve maize stalk strength. Multiyear field experiments (2013–2017) were conducted to determine the effects of foliar-applied ethephon on summer maize internode morphological, chemical and mechanical characteristics. The hypothetical structural equation model was used to analyze the contribution of ethephon-induced changes of internode morphological and chemical traits to stalk mechanical strength. Ethephon significantly reduced the basal internode length, while increasing internode diameters and breaking resistance. Meanwhile, ethephon significantly increased the ratio of structural dry matter to total dry matter and the amount of structural dry matter per unit length and volume. Mechanical assays suggested that ethephon significantly altered geometric properties and increased the maximum bending moment, maximum failure force, while depressing the material properties. Furthermore, correlation and path analyses revealed strong correlations and significant contribution of internode morphological properties to stalk mechanical strength, respectively. These results support the conclusion that ethephon-induced morphology alteration played a major role in improving maize internode strength.

scholarly journals Effect of temperature on the mechanical properties of 3D-printed PLA tensile specimens

2018 ◽  
Vol 24 (8) ◽  
pp. 1337-1346 ◽  
Author(s):  
Marzio Grasso ◽  
Lyes Azzouz ◽  
Paula Ruiz-Hincapie ◽  
Mauro Zarrelli ◽  
Guogang Ren
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Mechanical Test ◽  
Optical Microscope ◽  
Middle Part ◽  
Gauge Length ◽  
Effect Of Temperature ◽  
Content Type ◽  
Relevant Effect ◽  
3D Printed

Purpose Recent advancements of 3D printing technology have brought forward the interest for this technique in many engineering fields. This study aims to focus on mechanical properties of the polylactic acid (PLA) feeding material under different thermal conditions for a typical fusion deposition of 3D printer system. Design/methodology/approach Specimens were tested under static loading within the range 20ºC to 60ºC considering different infill orientations. The combined effect of temperature and filament orientation is investigated in terms of constitutive material parameters and final failure mechanisms. The difference between feeding system before and post-3D printing was also assessed by mechanical test on feeding filament to verify the thermal profile during the deposition phase. Findings The results in terms of Young’s modulus, ultimate tensile strength (UTS), strain at failure (εf) and stress at failure (σf) are presented and discussed to study the influence of process settings over the final deposited material. Fracture surfaces have been investigated using an optical microscope to link the phenomenological interpretation of the failure with the micro-mechanical behaviour. Experimental results show a strong correlation between stiffness and strength with the infill orientation and the temperature values. Moreover, a relevant effect is related to deformed geometry of the filament approaching glass transition region of the polymer according to the deposition orientation. Research limitations/implications The developed method can be applied to optimise the stiffness and strength of any 3D-printed composite according to the infill orientation. Practical implications To avoid the failure of specimens outside the gauge length, a previously proposed modification to the geometry was adopted. The geometry has a parabolic profile with a curvature of 1,000 mm tangent to the middle part of the specimen. Originality/value Several authors have reported the stiffness and strength of 3D-printed parts under static and ambient temperature for different build parameters. However, there is a lack of literature on the combination of the latter with the temperature effects on the mechanical properties which this paper covers.

Sign in / Sign up

Export Citation Format

Share Document