scholarly journals Damage Detection and Localization on Real Structures Subjected to Strong Motion Earthquakes Using the Curvature Evolution Method: The Navelli (Italy) Case Study

2021 ◽  
Vol 11 (14) ◽  
pp. 6496
Author(s):  
Rocco Ditommaso ◽  
Chiara Iacovino ◽  
Gianluca Auletta ◽  
Stefano Parolai ◽  
Felice Carlo Ponzo
Keyword(s):  
Damage Detection ◽  
Structural Damage ◽  
Evaluation Method ◽  
Empirical Relationship ◽  
Computing Time ◽  
Damage Index ◽  
Strong Motion ◽  
Critical Event ◽  
Curvature Variation ◽  
Detection And Localization

In recent years, structural health monitoring (SHM) has received increasing interest from both research and professional engineering communities. This is due to the limitations related to the use of traditional methods based on visual inspection for a rapid and effective assessment of structures and infrastructures when compared with the great potential offered by newly developed automatic systems. Most of these kinds of systems allow the continuous estimation of structural modal properties that are strictly correlated to the mechanical characteristics of the monitored structure. These can change as a result of material deterioration and structural damage related to earthquake shaking. Furthermore, a suitable configuration of a dense sensor network in a real-time monitoring system can allow to detect and localize structural and non-structural damage by comparing the initial and a final state of the structure after a critical event, such as a relevant earthquake. In this paper, the modal curvature evaluation method, used for damage detection and localization on framed structures, considering the mode curvature variation due to strong earthquake shaking, is further developed. The modified approach is validated by numerical and experimental case studies. The extended procedure, named “Curvature Evolution Method” (CEM), reduces the required computing time and the uncertainties in the results. Furthermore, in this work, an empirical relationship between curvature variation and damage index has been defined for both bare and infilled frames.

Structural Damage Assessment Using Output-Only Measurement: Localization and Quantification

2013 ◽  
Author(s):  
Chin-Hsiung Loh ◽  
Min-Hsuan Tseng ◽  
Shu-Hsien Chao
Keyword(s):  
Damage Detection ◽  
Damage Assessment ◽  
Structural Damage ◽  
Damage Identification ◽  
Model Updating ◽  
Null Space ◽  
Singular Spectrum Analysis ◽  
Damage Index ◽  
Computation Efficiency ◽  
Output Only

One of the important issues to conduct the damage detection of a structure using vibration-based damage detection (VBDD) is not only to detect the damage but also to locate and quantify the damage. In this paper a systematic way of damage assessment, including identification of damage location and damage quantification, is proposed by using output-only measurement. Four level of damage identification algorithms are proposed. First, to identify the damage occurrence, null-space and subspace damage index are used. The eigenvalue difference ratio is also discussed for detecting the damage. Second, to locate the damage, the change of mode shape slope ratio and the prediction error from response using singular spectrum analysis are used. Finally, to quantify the damage the RSSI-COV algorithm is used to identify the change of dynamic characteristics together with the model updating technique, the loss of stiffness can be identified. Experimental data collected from the bridge foundation scouring in hydraulic lab was used to demonstrate the applicability of the proposed methods. The computation efficiency of each method is also discussed so as to accommodate the online damage detection.

FEM Free Damage Detection of Beam Structures Using the Deflections Estimated by Modal Flexibility Matrix

2021 ◽  
pp. 2150128
Author(s):  
Wen-Yu He ◽  
Wei-Xin Ren ◽  
Lei Cao ◽  
Quan Wang
Keyword(s):  
Damage Detection ◽  
Structural Damage ◽  
Damage Index ◽  
Element Model ◽  
Mode Shapes ◽  
Beam Structures ◽  
Flexibility Matrix ◽  
Damage Quantification ◽  
Modal Flexibility ◽  
The Cost

The deflection of the beam estimated from modal flexibility matrix (MFM) indirectly is used in structural damage detection due to the fact that deflection is less sensitive to experimental noise than the element in MFM. However, the requirement for mass-normalized mode shapes (MMSs) with a high spatial resolution and the difficulty in damage quantification restricts the practicability of MFM-based deflection damage detection. A damage detection method using the deflections estimated from MFM is proposed for beam structures. The MMSs of beams are identified by using a parked vehicle. The MFM is then formulated to estimate the positive-bending-inspection-load (PBIL) caused deflection. The change of deflection curvature (CDC) is defined as a damage index to localize damage. The relationship between the damage severity and the deflection curvatures is further investigated and a damage quantification approach is proposed accordingly. Numerical and experimental examples indicated that the presented approach can detect damages with adequate accuracy at the cost of limited number of sensors. No finite element model (FEM) is required during the whole detection process.

Research for Structural Damage Identification Method Based on Stable Time Series and Principal Component Analysis

2014 ◽  
Vol 578-579 ◽  
pp. 1020-1023
Author(s):  
Jing Zhou Lu ◽  
Jia Chen Wang ◽  
Xu Zhu
Keyword(s):  
Principal Component Analysis ◽  
Time Series ◽  
Damage Detection ◽  
Structural Damage ◽  
Computing Time ◽  
Principal Component ◽  
Component Analysis ◽  
Identification Accuracy ◽  
Frame Structure ◽  
Ar Model

In this paper, we introduce a set of techniques for time series analysis based on principal component analysis (PCA). Firstly, the autoregressive (AR) model is established using acceleration response data, and the root mean squared error (RMSE) of AR model is calculated based on PCA. Then a new damage sensitive feature (DSF) based on the AR coefficients is presented. To test the efficacy of the damage detection and localization methodologies, the algorithm has been tested on the analytical and experimental results of a three-story frame structure model of the Los Alamos National Laboratory. The result of the damage detection indicates that the algorithm is able to identify and localize minor to severe damage as defined for the structure. It shows that the suggested method can lead to less amount of computing time, high suitability and identification accuracy.

Study on Damage Location of Spatial Structures Based on Wavelet Analysis of Model Strain Energy

2013 ◽  
Vol 639-640 ◽  
pp. 1033-1037
Author(s):  
Yong Mei Li ◽  
Bing Zhou ◽  
Guo Fu Sun ◽  
Bo Yan Yang
Keyword(s):  
Wavelet Analysis ◽  
Damage Detection ◽  
Structural Damage ◽  
Strain Energy ◽  
Damage Identification ◽  
Damage Index ◽  
Structural Damage Detection ◽  
Modal Strain Energy ◽  
Wavelet Method ◽  
Long Span

The research to identify and locate the damage to the engineering structure mainly aimed at some simple structure forms before, such as beam and framework. Damage shows changes of local characteristics of the signal, while wavelet analysis can reflect local damage traits of the signal in time domain and frequency domain. For confirming the validity and applicability of structural damage identification methods, wavelet analysis is used to spatial structural damage detection. The wavelet analysis technique provides new ideas and methods of spatial steel structural damage detection. Based on the theory of wavelet singularity detection，with the injury signal of modal strain energy as structural damage index，the mixing of the modal strain energy and wavelet method to identify and locate the damage to the spatial structure is considered. The multiplicity of the bars and nodes can be taken into account, and take the destructive and nondestructive modal strain energy of Kiewitt-type reticulated shell with 40m span as an example of numerical simulation，the original damage signal and the damage signal after wavelet transformation is compared. The location of the declining stiffness identified by the maximum of wavelet coefficients，analyzed as signal by db1 wavelet，and calculate the graph relation between coefficients of the wavelets and the damage to the structure by discrete or continuous wavelet transform, and also check the accuracy degree of this method with every damage case. Finally，the conclusion is drawn that the modal strain energy and wavelet method to identify and locate the damage to the long span reticulated shell is practical, effective and accurate, that the present method as a reliable and practical way can be adopted to detect the single and several locations of damage in structures.

scholarly journals Structural Damage Diagnosis-Oriented Impulse Response Function Estimation under Seismic Excitations

Sensors ◽  
2019 ◽  
Vol 19 (24) ◽  
pp. 5413
Author(s):  
Jian-Fu Lin ◽  
Junfang Wang ◽  
Li-Xin Wang ◽  
Siu-seong Law
Keyword(s):  
Damage Detection ◽  
Impulse Response ◽  
Response Function ◽  
Structural Damage ◽  
Numerical Study ◽  
Damage Index ◽  
Impulse Response Function ◽  
Function Estimation ◽  
Seismic Excitations ◽  
Transformation Matrices

Impulse response function (IRF) is an ideal structural damage index for the identification of structural damage associated with changes in modal properties. However, IRFs from multiple excitations applied at different degrees-of-freedoms jointly contribute to the dynamic response, and their estimation is often underdetermined. Although some efforts have been devoted to the estimation of IRF for a structure under single excitation, the case under multiple excitations has not been fully investigated yet. The estimation of IRF under multiple excitations is generally an ill-conditioned inverse problem such that an incorrect or non-feasible solution is common, preventing its application to damage detection. This work explores this problem by introducing dimensionality reduction transformation matrices relating two sets of IRFs of a structure with discussions on the performance of the non-unique transformation matrices. Then, the extraction of IRF via wavelet-based and Tikhonov regularization-based methods are compared. Finally, a numerical study with a truss structure is conducted to validate the estimation of the IRFs and to demonstrate their applicability for damage detection under seismic excitations. Both the damage locations and severity are accurately identified, indicating the proposed methodology can enable the IRFs estimation under multiple excitations for successful damage detection.

Optimization of Wavelet Packets Analysis for Damage Detection in Composite Materials

2007 ◽  
Vol 334-335 ◽  
pp. 1149-1152
Author(s):  
Long Yu ◽  
Yun Ju Yan ◽  
Jie Sheng Jiang ◽  
Li Cheng
Keyword(s):  
Composite Materials ◽  
Damage Detection ◽  
Structural Damage ◽  
Damage Index ◽  
Wavelet Packets ◽  
Structural Vibration ◽  
Time Saving ◽  
Before And After ◽  
Vibration Responses ◽  
Artificial Neural Network Ann

A method based on entropy-based criteria is present to choose the optimal decomposition of Wavelet Packets Analysis (WPA) for damage detection in composite materials. The structural damage indexes constructed based on energy spectrum variation of the structural vibration responses decomposed using WPA before and after the occurrence of structural damage usually generate a complete binary tree to calculate its elements. Date mining is carried out in this paper by adoption entropy as the criteria to choose the optimal decomposition tree. In the decomposition process, only the sub-signals which contain main information of the original signal are decomposed to generate next level sub-signals. New damage index is constructed based on the optimal decomposition. Then the dimension of the damage index is reduced while still keeping its sensitive to damage. Whether Artificial Neural Network (ANN) or genetic algorithm (GA) is used in the further process of telling structural damage status from damage index, this reduction will make remarkable time saving.

scholarly journals GP-ARX-Based Structural Damage Detection and Localization under Varying Environmental Conditions

2020 ◽  
Vol 9 (3) ◽  
pp. 41 ◽  
Author(s):  
Konstantinos Tatsis ◽  
Vasilis Dertimanis ◽  
Yaowen Ou ◽  
Eleni Chatzi
Keyword(s):  
Damage Detection ◽  
Time Scale ◽  
Structural Damage ◽  
Gaussian Process Regression ◽  
Parametric Models ◽  
Arx Model ◽  
Single Input Single Output ◽  
Operational Conditions ◽  
Long Time ◽  
Detection And Localization

The representation of structural dynamics in the absence of physics-based models, is often accomplished through the identification of parametric models, such as the autoregressive with exogenous inputs, e.g. ARX models. When the structure is amenable to environmental variations, parameter-varying extensions of the original ARX model can be implemented, allowing for tracking of the operational variability. Yet, the latter occurs in sufficiently longer time-scales (days, weeks, months), as compared to system dynamics. For inferring a “global”, long time-scale varying ARX model, data from a full operational cycle has to typically become available. In addition, when the sensor network comprises multiple nodes, the identification of long time-scale varying, vector ARX models grow in complexity. We address these issues by proposing a distributed framework for structural identification, damage detection and localization. Its main features are: (i) the individual estimation of local, single-input-single-output ARX models at every operational point; (ii) the long time-scale representation of each individual ARX coefficient via a Gaussian process regression, which captures dependency on varying Environmental and Operational Conditions (EOCs); (iii) the establishment of a distributed residual generation algorithm for damage detection, which produces time-series of well-defined stationary statistics, with detected discrepancies used for damage diagnosis; and, (iv) exploitation of ARX-inferred mode shape curvatures, obtained via ARX-inferred global state-space models, of the healthy and damaged states, for damage localization. The method is assessed via application on two numerical case studies of different complexity, with the results confirming its efficacy for diagnostics under varying EOCs.

Sign in / Sign up

Export Citation Format

Share Document