scholarly journals Trace CH4 Gas Detection Based on an Integrated Spherical Photoacoustic Cell

2021 ◽  
Vol 11 (11) ◽  
pp. 4997
Author(s):  
Yexiang Jiao ◽  
Hongji Fan ◽  
Zhenfeng Gong ◽  
Kai Yang ◽  
Feiyang Shen ◽  
...  
Keyword(s):  
Resonant Frequency ◽  
High Speed ◽  
Gas Detection ◽  
Laser Source ◽  
Photoacoustic Cell ◽  
Long Distance ◽  
Element Simulation ◽  
Resonant Modes ◽  
All Optical ◽  
Dfb Laser

This paper presents an integrated spherical photoacoustic cell (SPAC) for trace methane (CH4) gas detection. Theoretical analysis and analogue simulations are carried out to analyze the acoustic field distribution of the SPAC at resonant and non-resonant modes. The finite element simulation results based on COMSOL show that the first-order radial resonant frequency and second-order angular resonant frequency are 24,540 Hz and 18,250 Hz, respectively, which show good agreements with the formula analysis results. The integrated SPAC, together with a high-speed spectrometer and a distributed feedback (DFB) laser source, makes up a photoacoustic (PA) spectroscopy (PAS) system, which is employed for CH4 detection. The minimum detection limit (MDL) is measured to be 126.9 parts per billion (ppb) at an average time of 1000 s. The proposed SPAC has an integrated, miniaturized and all-optical structure, which can be used for remote and long-distance trace gas detection.

scholarly journals High Speed, Localized Multi-Point Strain Measurements on a Containment Vessel at 1.7 MHz Using Swept-Wavelength Laser-Interrogated Fiber Bragg Gratings

Sensors ◽  
2020 ◽  
Vol 20 (20) ◽  
pp. 5935
Author(s):  
Steve Gilbertson ◽  
Mark Pickrell ◽  
Dario Castano ◽  
Gary Salazar ◽  
Tom Beery ◽  
...  
Keyword(s):  
Strain Measurement ◽  
High Speed ◽  
High Explosive ◽  
Fiber Bragg Gratings ◽  
Bragg Gratings ◽  
Laser Source ◽  
Global Changes ◽  
Element Analysis ◽  
All Optical ◽  
Explosive Detonation

Dynamic elastic strain in ~1.8 and 1.0 m diameter containment vessels containing a high explosive detonation was measured using an array of fiber Bragg gratings. The all-optical method, called real-time localized strain measurement, recorded the strain for 10 ms after detonation with additional measurements being sequentially made at a rate of 1.7 MHz. A swept wavelength laser source provided the repetition rate necessary for such high-speed measurements while also providing enough signal strength and bandwidth to simultaneously measure 8 or more unique points on the vessel’s surface. The data presented here arethen compared with additional diagnostics consisting of a fast spectral interferometer and an optical backscatter reflectometer to show a comparison between the local and global changes in the vessel strain, both dynamically and statically to further characterize the performance of the localized strain measurement. The results are also compared with electrical resistive strain gauges and finite element analysis simulations.

High Speed 1.55 μm Lasers for Fiber Optic Transmission

1997 ◽  
Vol 08 (03) ◽  
pp. 457-474
Author(s):  
Paul A. Morton
Keyword(s):  
Active Region ◽  
High Speed ◽  
Carrier Transport ◽  
Multiple Quantum Well ◽  
Optical Filter ◽  
Essential Elements ◽  
Laser Source ◽  
Multiple Quantum ◽  
Modulation Bandwidth ◽  
Dfb Laser

This paper describes the essential elements for creating a practical wide bandwidth directly modulated laser source. This includes considerations of the intrinsic limitations of the laser structure, due to the resonant frequency and damping of the laser output, together with carrier transport issues to allow carriers in the device active region to be efficiently modulated at high speeds. The use of a P-doped compressively strained multiple-quantum well active region to provide high intrinsic speed and remove transport limitations is described, together with record setting results of 25 GHz modulation bandwidth for a 1.55 μm Fabry–Perot laser and 26 GHz bandwidth for a 1.55 μm DFB laser. The challenges of providing high bandwidth electrical connections to the laser on a suitable submount, together with fiber attachment and microwave packaging are discussed. Results of fully packaged 1.55 μm DFB laser with 25 GHz modulation bandwidth are shown. Digital modulation of the packaged 1.55 μm DFB including impedance matching is described, and the transient wavelength chirp is presented. This low chirp is reduced further using an optical filter, to provide a 10 GBit/s source that can transmit error free over 38.5 km of standard optical fiber.

High-Speed, Long-Distance Electric Traction

1905 ◽  
Vol 59 (1537supp) ◽  
pp. 24627-24628
Author(s):  
Charles A. Mudge
Keyword(s):  
High Speed ◽  
Long Distance ◽  
Electric Traction

A High Speed and Ultra Long-Haul Radio-Over-Fiber System Employing Dual Photoelectric Arms Coherent Modulation and Optical Duo-Binary Coding

2014 ◽  
Vol 988 ◽  
pp. 544-547
Author(s):  
Guang Li
Keyword(s):  
High Speed ◽  
Continuous Wave ◽  
Single Mode ◽  
Fiber Amplifier ◽  
Radio Over Fiber ◽  
Laser Source ◽  
Signal Spectrum ◽  
Fiber System ◽  
Binary Coding ◽  
Coherent Modulation

A novel high speed and ultra long-haul radio-over-fiber (ROF) system based on Dual Photoelectric Arms Coherent Modulation (DPACM) and Optical Duo-Binary Coding (ODBC) is proposed, and demonstrated. The signal spectrum bandwidth, generated by ODBC based on the first order DPACM, is half of non-return-to-zero (NRZ ) signal spectrum bandwidth. The secondary order DPACM generates a 40-GHz Millimeter-wave (mm-wave) that is transmitted over fiber (ROF). The simulation results show that, the bit rate can be up to 40 Gbps and the transmission distance is over 1500 Km, based on the ROF system with a 0 dBm continuous-wave laser source, multiple stages Er-Doped Fiber Amplifier (EDFA), a standard single mode fiber (SSMF) with a dispersion of 17 ps/nm/Km and a attenuation of 0.2 dB/Km.

An all optical photonic crystal half adder suitable for optical processing applications

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Hamed Azhdari ◽  
Sahel Javahernia
Keyword(s):  
Photonic Crystal ◽  
Optical Waveguides ◽  
High Speed ◽  
Building Blocks ◽  
Optical Signal ◽  
Ring Resonators ◽  
Optical Processing ◽  
Nonlinear Photonic Crystal ◽  
Half Adder ◽  
All Optical

Abstract Increasing the speed of operation in all optical signal processing is very important. For reaching this goal one needs high speed optical devices. Optical half adders are one of the important building blocks required in optical processing. In this paper an optical half adder was proposed by combining nonlinear photonic crystal ring resonators with optical waveguides. Finite difference time domain method wase used for simulating the final structure. The simulation results confirmed that the rise time for the proposed structure is about 1 ps.

scholarly journals Dual-shot dynamics and ultimate frequency of all-optical magnetic recording on GdFeCo

2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Sicong Wang ◽  
Chen Wei ◽  
Yuanhua Feng ◽  
Hongkun Cao ◽  
Wenzhe Li ◽  
...  
Keyword(s):  
Magnetization Reversal ◽  
Energy Efficient ◽  
High Speed ◽  
Data Transfer ◽  
Laser Pulses ◽  
Time Resolved ◽  
All Optical ◽  
Fs Laser ◽  
High Speed Data ◽  
Natural Way

AbstractAlthough photonics presents the fastest and most energy-efficient method of data transfer, magnetism still offers the cheapest and most natural way to store data. The ultrafast and energy-efficient optical control of magnetism is presently a missing technological link that prevents us from reaching the next evolution in information processing. The discovery of all-optical magnetization reversal in GdFeCo with the help of 100 fs laser pulses has further aroused intense interest in this compelling problem. Although the applicability of this approach to high-speed data processing depends vitally on the maximum repetition rate of the switching, the latter remains virtually unknown. Here we experimentally unveil the ultimate frequency of repetitive all-optical magnetization reversal through time-resolved studies of the dual-shot magnetization dynamics in Gd27Fe63.87Co9.13. Varying the intensities of the shots and the shot-to-shot separation, we reveal the conditions for ultrafast writing and the fastest possible restoration of magnetic bits. It is shown that although magnetic writing launched by the first shot is completed after 100 ps, a reliable rewriting of the bit by the second shot requires separating the shots by at least 300 ps. Using two shots partially overlapping in space and minimally separated by 300 ps, we demonstrate an approach for GHz magnetic writing that can be scaled down to sizes below the diffraction limit.

Thermal comfort analysis of a high-speed train cabin considering the solar radiation effects

2019 ◽  
Vol 29 (8) ◽  
pp. 1101-1117
Author(s):  
Lin Yang ◽  
Xiangdong Li ◽  
Jiyuan Tu
Keyword(s):  
Solar Radiation ◽  
Thermal Comfort ◽  
High Speed ◽  
Radiation Effects ◽  
Numerical Study ◽  
Thermal Conditions ◽  
Long Distance ◽  
High Speed Rail ◽  
Hot Weather ◽  
Cabin Environment

Due to the fast development of high-speed rail (HSR) around the world, high-speed trains (HSTs) are becoming a strong competitor against airliners in terms of long-distance travel. Compared with airliner cabins, HST cabins have much larger window sizes. When the big windows provide better lighting and view of the scenery, they also have significant effects on the thermal conditions in the cabins due to the solar radiation through them. This study presents a numerical study on the solar radiation on the thermal comfort in a typical HST cabin. The effect of solar radiation was discussed in terms of airflow pattern, temperature distribution and thermal comfort indices. Parametric studies with seven different daytime hours were carried out. The effect of using the roller curtain was also studied. The overall cabin air temperature, especially near passengers, was found to have significantly increased by solar radiation. Passengers sitting next to windows were recorded to have an obvious thermal comfort variation at different hours of the day. To improve the passengers’ comfort and reduce energy consumption during hot weather, the use of a curtain could effectively reduce the solar radiation effect in the cabin environment.

scholarly journals An Improved Lagrangian-Inverse Method for Evaluating the Dynamic Constitutive Parameters of Concrete

Materials ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 1871
Author(s):  
Xinlu Yu ◽  
Yingqian Fu ◽  
Xinlong Dong ◽  
Fenghua Zhou ◽  
Jianguo Ning
Keyword(s):  
High Speed ◽  
Inverse Method ◽  
Image Correlation ◽  
Analysis Method ◽  
Stress Strain ◽  
Optical Techniques ◽  
Element Simulation ◽  
Non Linear ◽  
Constitutive Parameters ◽  
Inverse Analysis Method

The dynamic constitutive behaviors of concrete-like materials are of vital importance for structure designing under impact loading conditions. This study proposes a new method to evaluate the constitutive behaviors of ordinary concrete at high strain rates. The proposed method combines the Lagrangian-inverse analysis method with optical techniques (ultra-high-speed camera and digital image correlation techniques). The proposed method is validated against finite-element simulation. Spalling tests were conducted on concretes where optical techniques were employed to obtain the high-frequency spatial and temporal displacement data. We then obtained stress–strain curves of concrete by applying the proposed method on the results of spalling tests. The results show non-linear constitutive behaviors in these stress–strain curves. These non-linear constitutive behaviors can be possibly explained by local heterogeneity of concrete. The proposed method provides an alternative mean to access the dynamic constitutive behaviors which can help future structure designing of concrete-like materials.

Sign in / Sign up

Export Citation Format

Share Document