scholarly journals A Hybrid Nanofluid of Alumina and Tungsten Oxide for Performance Enhancement of a Parabolic Trough Collector under the Weather Conditions of Budapest

2021 ◽  
Vol 11 (11) ◽  
pp. 4946
Author(s):  
Otabeh Al-Oran ◽  
Ferenc Lezsovits
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Flow Rate ◽  
Thermal Performance ◽  
Radiation Intensity ◽  
Hybrid Nanofluid ◽  
Intensity Level ◽  
Parabolic Trough

Recently, there has been significant interest in the thermal performance of parabolic trough collectors. They are capable of operating and generating highly variable temperature ranges, which can be used in various applications. This paper, therefore, addressed the thermal performance model of using a parabolic trough collector under the radiation intensity level found in Budapest city, as well as the effect of inserting a hybrid nanofluid as the thermal fluid. First, a new modified hybrid nanofluid of alumina and tungsten oxide-based Therminol VP1 is used to enhance the thermal properties of the thermal fluid to be more efficient to use. This enhancement is performed under various volume concentrations and has a volume fraction of 50:50. Second, in order to demonstrate the effectiveness of the thermal element, mathematical energy balance equations were solved and simulated using MATLAB Symbolic Tools. The simulation is presented for two cases: one under a constant radiation intensity and the other under the radiation intensity level of Budapest. For both cases, the results of the dimensionless Nusselt number, heat transfer coefficient, pressure drop, exergy efficiency, and energy efficiency are described. The major findings show that a volume concentration of 4% (Al2O3 and WO3) based Therminol VP1 was the most efficient volume concentrations in both cases. For the first case, the maximum enhancement of the Nusselt number and the heat transfer coefficient are 138% and 169%, respectively. These results enhanced the thermal and exergy efficiencies by 0.39% and 0.385% at a temperature 600 K, flow rate of 150 L/min, and radiation intensity of 1000 W/m2. For the second case, the maximum exergy and energy values are recorded at midday under Budapest’s summer climatic conditions and reach 32.728% and 71.255%, respectively, under the optimum temperature of 500 K and flow rate of 150 L/min. Accordingly, the mean improvement in thermal and exergy efficiencies approximately equal to 0.25% at a high concentration, regardless of the season (summer or winter).

scholarly journals Effect of nanofluid properties and mass-flow rate on heat transfer of parabolic-trough concentrating solar system

2019 ◽  
Vol 16 (1) ◽  
pp. 33-44 ◽  
Author(s):  
M.K. Islam ◽  
Md. Hasanuzzaman ◽  
N.A. Rahim ◽  
A. Nahar
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Laminar Flow ◽  
Turbulent Flow ◽  
Transfer Coefficient ◽  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Parabolic Trough ◽  
Concentrated Solar Energy

Sustainable power generation, energy security, and global warming are the big challenges to the world today. These issues may be addressed through the increased usage of renewable energy resources and concentrated solar energy can play a vital role in this regard. The performance of a parabolic-trough collector’s receiver is here investigated analytically and experimentally using water based and therminol-VP1based CuO, ZnO, Al2O3, TiO2, Cu, Al, and SiC nanofluids. The receiver size has been optimized by a simulation program written in MATLAB. Thus, numerical results have been validated by experimental outcomes under same conditions using the same nanofluids. Increased volumetric concentrations of nanoparticle is found to enhance heat transfer, with heat transfer coefficient the maximum in W-Cu and VP1-SiC, the minimum in W-TiO2 and VP1-ZnO at 0.8 kg/s flow rate. Changing the mass flow rate also affects heat transfer coefficient. It has been observed that heat transfer coefficient reaches its maximum of 23.30% with SiC-water and 23.51% with VP1-SiC when mass-flow rate is increased in laminar flow. Heat transfer enhancement drops during transitions of flow from laminar to turbulent. The maximum heat transfer enhancements of 9.49% and 10.14% were achieved with Cu-water and VP1-SiC nanofluids during turbulent flow. The heat transfer enhancements of nanofluids seem to remain constant when compared with base fluids during either laminar flow or turbulent flow.

scholarly journals CFD Analysis of Enhancement of Heat Transfer of Automobile Radiator with Hybrid Nanofluid as a Coolant

2021 ◽  
Vol 9 (9) ◽  
pp. 367-376
Author(s):  
Megha Zanzote
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Nusselt Number ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Volume Flow Rate ◽  
Inlet Temperature ◽  
Hybrid Nanofluid ◽  
Cfd Analysis ◽  
Maximum Enhancement

Abstract: The performance of the radiator depends on the fluid used in it as a coolant. The conventional fluids like water, ethylene glycol used as a coolant have low thermal conductivity and are not enough for transferring the heat to more extend. Nanoparticles because of their high thermal conductivity enhances the performance of the radiator when added into the base fluid. In the present work Al2O3-CuO/ Water based hybrid nanofluid is used as a coolant for the CFD analysis of automobile radiator. Different mixing ratios (80:20, 60:40,50:50,40:60 and 20:80) of Al2O3-CuO nanoparticles are used in water with 1% volume concentration. The inlet temperature and volume flow rate of fluid are kept constant. The nanofluid with 20:80 mixing ratio of Al2O3-CuO gives maximum enhancement in heat transfer coefficient and Nusselt number than water by 72% and 65% respectively. Keywords: Coolant, Heat Transfer Coefficient, Nusselt Number, Hybrid Nanofluids, Radiator

Olive Leaf-Synthesized Nanofluids for Solar Parabolic Trough Collector—Thermal Performance Evaluation

2019 ◽  
Vol 11 (4) ◽  
Author(s):  
Eric C. Okonkwo ◽  
Edidiong A. Essien ◽  
Doga Kavaz ◽  
Muhammad Abid ◽  
Tahir A. H. Ratlamwala
Keyword(s):  
Heat Transfer ◽  
Performance Evaluation ◽  
Heat Transfer Coefficient ◽  
Pressure Drop ◽  
Transfer Coefficient ◽  
Thermal Performance ◽  
Olive Leaf ◽  
Parabolic Trough ◽  
Leaf Extracts ◽  
Comparison Of The Results

This study presents a novel performance evaluation of the commercially available LS-2 collector operating with an oil-based olive leaf-synthesized nanofluid. The nanoparticles were synthesized experimentally from olive leaf extracts (OLEs): OLE-ZVI and OLE-TiO2. The thermophysical properties of the nanoparticles were then added to Syltherm-800 thermal oil, and its performance on the parabolic trough solar collector (PTC) was evaluated numerically. The PTC under study was modeled on the engineering equation solver (EES) and validated thermally with results found in the literature. The synthesized nanoparticles were also found to possess anticorrosion properties, nontoxic, and less expensive to produce when compared to commercially available ones. The use of the nanofluids (Syltherm-800/OLE-ZVI and Syltherm-800/OLE-TiO2) was evaluated against the parameters of thermal and exergetic efficiencies, heat transfer coefficient, thermal losses, and pressure drop. The study shows that an enhancement in thermal performance of 0.51% and 0.48% was achieved by using Syltherm-800/OLE-ZVI and Syltherm-800/OLE-TiO2 nanofluids, respectively. A heat transfer coefficient enhancement of 42.9% and 51.2% was also observed for Syltherm-800/OLE-TiO2 and Syltherm-800/OLE-ZVI nanofluids, respectively. Also, a mean variation in pressure drop of 11.5% was observed by using the nanofluids at a nanoparticle volumetric concentration of 3%. A comparison of the results of this study with related literature shows that the proposed nanofluids outperform those found in literature.

Thermal Analysis of Plate Condensers in Presence of Flow Maldistribution Using Refrigerant R134a

2006 ◽  
Author(s):  
P. R. Bobbili ◽  
B. Sunden ◽  
S. K. Das
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Flow Rate ◽  
Thermal Performance ◽  
Flow Rate Ratio ◽  
Two Phase ◽  
Wide Range ◽  
Flow Maldistribution ◽  
The Heat Transfer Coefficient

Flow maldistribution in plate heat exchangers causes deterioration of both thermal and hydraulic performance. The situation becomes more complicated for two phase flows during condensation where uneven distribution of the liquid to the channels reduces heat transfer due to high liquid flooding. The present study evaluates the thermal performance of falling film plate condensers with flow maldistribution from port to channel considering the heat transfer coefficient inside the channels as a function of channel flow rate. A generalized mathematical model has been developed to investigate the effect of maldistribution on the thermal performance as well as the exit vapor quality of a refrigerant, namely R-134a. A wide range of parameters are studied and these show the effects of the mass flow rate ratio of cold fluid (water) and two-phase refrigerant fluid, flow configuration, number of channels and correlation for the heat transfer coefficient. The analysis presented here also suggests an improved method for heat transfer data analysis for plate condensers.

Thermal performance of inserting hybrid nanofluid in parabolic trough collector

2021 ◽  
Author(s):  
Otabeh Al-Oran ◽  
Ferenc Lezsovits
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Thermal Performance ◽  
Hybrid Nanofluid ◽  
Heat Transfer Characteristics ◽  
Parabolic Trough ◽  
Transfer Coefficients ◽  
Parabolic Trough Collector ◽  
Heat Transfer Coefficients ◽  
Transfer Characteristics

AbstractIn this work, the thermal performance of using hybrid nanofluid of Ceria oxide and multi-walled carbon nanotube-based MOL 68 in the receiver tube of parabolic trough collector is simulated numerically. The influence of using this nanofluid under various volume concentrations and different Reynold numbers is solved numerically using computational fluid dynamics. The turbulent model's analysis is carried out based on k–ϵ re-normalization group and employed to find the Nusselt number and the heat transfer coefficients. The model results were validated with the previous correlation, which were used to evaluate the Nusselt number. The results showed that hybrid nanofluid enhances the heat transfer characteristics of the parabolic trough collector in comparison with the base fluid. Furthermore, even better heat transfer characteristics can be achieved with an increased volume concentration of the modified nanofluids.

scholarly journals Numerical Investigation on the Influence of Surface Flow Direction on the Heat Transfer Characteristics in a Granite Single Fracture

2021 ◽  
Vol 11 (2) ◽  
pp. 751
Author(s):  
Xuefeng Gao ◽  
Yanjun Zhang ◽  
Zhongjun Hu ◽  
Yibin Huang
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Flow Rate ◽  
Flow Direction ◽  
Heat Extraction ◽  
Geothermal System ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Heat Transfer Capacity

As fluid passes through the fracture of an enhanced geothermal system, the flow direction exhibits distinct angular relationships with the geometric profile of the rough fracture. This will inevitably affect the heat transfer characteristics in the fracture. Therefore, we established a hydro-thermal coupling model to study the influence of the fluid flow direction on the heat transfer characteristics of granite single fractures and the accuracy of the numerical model was verified by experiments. Results demonstrate a strong correlation between the distribution of the local heat transfer coefficient and the fracture morphology. A change in the flow direction is likely to alter the transfer coefficient value and does not affect the distribution characteristics along the flow path. Increasing injection flow rate has an enhanced effect. Although the heat transfer capacity in the fractured increases with the flow rate, a sharp decline in the heat extraction rate and the total heat transfer coefficient is also observed. Furthermore, the model with the smooth fracture surface in the flow direction exhibits a higher heat transfer capacity compared to that of the fracture model with varying roughness. This is attributed to the presence of fluid deflection and dominant channels.

Energy Efficient Hybrid Nanofluids for Tubular Cooling Applications

2014 ◽  
Vol 592-594 ◽  
pp. 922-926 ◽  
Author(s):  
Devasenan Madhesh ◽  
S. Kalaiselvam
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Volume Concentration ◽  
Thermal Characteristics ◽  
Hybrid Nanofluid ◽  
Tubular Heat Exchanger ◽  
Overall Heat Transfer Coefficient ◽  
Flow Through ◽  
Hybrid Nanofluids

Analysis of heat transfer behaviour of hybrid nanofluid (HyNF) flow through the tubular heat exchanger was experimentally investigated. In this analysis the effects of thermal characteristics of forced convection, Nusselt number, Peclet number, and overall heat transfer coefficient were investigated.The nanofluid was prepared by dispersing the copper-titania hybrid nanocomposite (HyNC) in the water. The experiments were performed for various nanoparticle volume concentrations addition in the base fluid from the range of 0.1% to 1.0%. The experimental results show that the overall heat transfer coefficient was found to increases maximum by 30.4%, up to 0.7% volume concentration of HyNC.

scholarly journals Experimental Estimation of Temporal and Spatial Resolution of Coefficient of Heat Transfer in a Channel Using Inverse Heat Transfer Method

2019 ◽  
Author(s):  
Majid Karami ◽  
Somayeh Davoodabadi Farahani ◽  
Farshad Kowsary ◽  
Amir Mosavi
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Spatial Resolution ◽  
Time History ◽  
Inverse Technique ◽  
Inverse Heat Transfer ◽  
Temporal And Spatial ◽  
Transfer Method

In this research, a novel method to investigation the transient heat transfer coefficient in a channel is suggested experimentally, in which the water flow, itself, is considered both just liquid phase and liquid-vapor phase. The experiments were designed to predict the temporal and spatial resolution of Nusselt number. The inverse technique method is non-intrusive, in which time history of temperature is measured, using some thermocouples within the wall to provide input data for the inverse algorithm. The conjugate gradient method is used mostly as an inverse method. The temporal and spatial changes of heat flux, Nusselt number, vapor quality, convection number, and boiling number have all been estimated, showing that the estimated local Nusselt numbers of flow for without and with phase change are close to those predicted from the correlations of Churchill and Ozoe (1973) and Kandlikar (1990), respectively. This study suggests that the extended inverse technique can be successfully utilized to calculate the local time-dependent heat transfer coefficient of boiling flow.

Sign in / Sign up

Export Citation Format

Share Document