scholarly journals Acoustic Identification of the Voicing Boundary during Intervocalic Offsets and Onsets Based on Vocal Fold Vibratory Measures

2021 ◽  
Vol 11 (9) ◽  
pp. 3816
Author(s):  
Jennifer M. Vojtech ◽  
Dante D. Cilento ◽  
Austin T. Luong ◽  
Jacob P. Noordzij ◽  
Manuel Diaz-Cadiz ◽  
...  
Keyword(s):  
Gold Standard ◽  
Vocal Fold ◽  
Estimation Method ◽  
Boundary Detection ◽  
Identification Accuracy ◽  
Estimation Methods ◽  
Detection Accuracy ◽  
Acoustic Features ◽  
Gold Standard Method ◽  
Boundary Cycle

Methods for automating relative fundamental frequency (RFF)—an acoustic estimate of laryngeal tension—rely on manual identification of voiced/unvoiced boundaries from acoustic signals. This study determined the effect of incorporating features derived from vocal fold vibratory transitions for acoustic boundary detection. Simultaneous microphone and flexible nasendoscope recordings were collected from adults with typical voices (N = 69) and with voices characterized by excessive laryngeal tension (N = 53) producing voiced–unvoiced–voiced utterances. Acoustic features that coincided with vocal fold vibratory transitions were identified and incorporated into an automated RFF algorithm (“aRFF-APH”). Voiced/unvoiced boundary detection accuracy was compared between the aRFF-APH algorithm, a recently published version of the automated RFF algorithm (“aRFF-AP”), and gold-standard, manual RFF estimation. Chi-square tests were performed to characterize differences in boundary cycle identification accuracy among the three RFF estimation methods. Voiced/unvoiced boundary detection accuracy significantly differed by RFF estimation method for voicing offsets and onsets. Of 7721 productions, 76.0% of boundaries were accurately identified via the aRFF-APH algorithm, compared to 70.3% with the aRFF-AP algorithm and 20.4% with manual estimation. Incorporating acoustic features that corresponded with voiced/unvoiced boundaries led to improvements in boundary detection accuracy that surpassed the gold-standard method for calculating RFF.

Using The Fully Modified M Method In Estimating The Effect Of Cultivated Area On Barley Production In Iraq For The Period 1970-2018

2020 ◽  
Vol 2020 (66) ◽  
pp. 101-110
Author(s):  
. Azhar Kadhim Jbarah ◽  
Prof Dr. Ahmed Shaker Mohammed
Keyword(s):  
Regression Model ◽  
Moving Average ◽  
Estimation Method ◽  
Estimation Methods ◽  
Autoregressive Moving Average ◽  
Moving Average Models ◽  
Error Terms ◽  
Relationship Of ◽  
The Relationship ◽  
Barley Crop

The research is concerned with estimating the effect of the cultivated area of barley crop on the production of that crop by estimating the regression model representing the relationship of these two variables. The results of the tests indicated that the time series of the response variable values is stationary and the series of values of the explanatory variable were nonstationary and that they were integrated of order one ( I(1) ), these tests also indicate that the random error terms are auto correlated and can be modeled according to the mixed autoregressive-moving average models ARMA(p,q), for these results we cannot use the classical estimation method to estimate our regression model, therefore, a fully modified M method was adopted, which is a robust estimation methods, The estimated results indicate a positive significant relation between the production of barley crop and cultivated area.

Spherical object recognition based on the number of contour edges extracted by fitting and convex hull processing

2020 ◽  
pp. 095440702096950
Author(s):  
Bochang Zou ◽  
Huadong Qiu ◽  
Yufeng Lu
Keyword(s):  
Convex Hull ◽  
Target Object ◽  
Identification Accuracy ◽  
Detection Accuracy ◽  
Morphological Operations ◽  
Circle Detection ◽  
Spherical Object ◽  
Single Feature ◽  
Contour Fitting ◽  
Rgb Images

The detection of spherical targets in workpiece shape clustering and fruit classification tasks is challenging. Spherical targets produce low detection accuracy in complex fields, and single-feature processing cannot accurately recognize spheres. Therefore, a novel spherical descriptor (SD) for contour fitting and convex hull processing is proposed. The SD achieves image de-noising by combining flooding processing and morphological operations. The number of polygon-fitted edges is obtained by convex hull processing based on contour extraction and fitting, and two RGB images of the same group of objects are obtained from different directions. The two fitted edges of the same target object obtained at two RGB images are extracted to form a two-dimensional array. The target object is defined as a sphere if the two values of the array are greater than a custom threshold. The first classification result is obtained by an improved K-NN algorithm. Circle detection is then performed on the results using improved Hough circle detection. We abbreviate it as a new Hough transform sphere descriptor (HSD). Experiments demonstrate that recognition of spherical objects is obtained with 98.8% accuracy. Therefore, experimental results show that our method is compared with other latest methods, HSD has higher identification accuracy than other methods.

scholarly journals Quantum chemical benchmark databases of gold-standard dimer interaction energies

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Alexander G. Donchev ◽  
Andrew G. Taube ◽  
Elizabeth Decolvenaere ◽  
Cory Hargus ◽  
Robert T. McGibbon ◽  
...  
Keyword(s):  
Machine Learning ◽  
Gold Standard ◽  
Training Data ◽  
Structure Theory ◽  
Cluster Method ◽  
Coupled Cluster ◽  
Interaction Energies ◽  
Gold Standard Method ◽  
Representative Subset ◽  
Semi Empirical

AbstractAdvances in computational chemistry create an ongoing need for larger and higher-quality datasets that characterize noncovalent molecular interactions. We present three benchmark collections of quantum mechanical data, covering approximately 3,700 distinct types of interacting molecule pairs. The first collection, which we refer to as DES370K, contains interaction energies for more than 370,000 dimer geometries. These were computed using the coupled-cluster method with single, double, and perturbative triple excitations [CCSD(T)], which is widely regarded as the gold-standard method in electronic structure theory. Our second benchmark collection, a core representative subset of DES370K called DES15K, is intended for more computationally demanding applications of the data. Finally, DES5M, our third collection, comprises interaction energies for nearly 5,000,000 dimer geometries; these were calculated using SNS-MP2, a machine learning approach that provides results with accuracy comparable to that of our coupled-cluster training data. These datasets may prove useful in the development of density functionals, empirically corrected wavefunction-based approaches, semi-empirical methods, force fields, and models trained using machine learning methods.

scholarly journals Comparative Analysis of Kinect-Based and Oculus-Based Gaze Region Estimation Methods in a Driving Simulator

Sensors ◽  
2020 ◽  
Vol 21 (1) ◽  
pp. 26
Author(s):  
David González-Ortega ◽  
Francisco Javier Díaz-Pernas ◽  
Mario Martínez-Zarzuela ◽  
Míriam Antón-Rodríguez
Keyword(s):  
Virtual Reality ◽  
Comparative Analysis ◽  
Driving Simulator ◽  
Estimation Method ◽  
Estimation Methods ◽  
Gaze Estimation ◽  
Driving Simulators ◽  
Oculus Rift ◽  
Gaze Patterns ◽  
And Performance

Driver’s gaze information can be crucial in driving research because of its relation to driver attention. Particularly, the inclusion of gaze data in driving simulators broadens the scope of research studies as they can relate drivers’ gaze patterns to their features and performance. In this paper, we present two gaze region estimation modules integrated in a driving simulator. One uses the 3D Kinect device and another uses the virtual reality Oculus Rift device. The modules are able to detect the region, out of seven in which the driving scene was divided, where a driver is gazing at in every route processed frame. Four methods were implemented and compared for gaze estimation, which learn the relation between gaze displacement and head movement. Two are simpler and based on points that try to capture this relation and two are based on classifiers such as MLP and SVM. Experiments were carried out with 12 users that drove on the same scenario twice, each one with a different visualization display, first with a big screen and later with Oculus Rift. On the whole, Oculus Rift outperformed Kinect as the best hardware for gaze estimation. The Oculus-based gaze region estimation method with the highest performance achieved an accuracy of 97.94%. The information provided by the Oculus Rift module enriches the driving simulator data and makes it possible a multimodal driving performance analysis apart from the immersion and realism obtained with the virtual reality experience provided by Oculus.

scholarly journals Multi-Scene Building Height Estimation Method Based on Shadow in High Resolution Imagery

2021 ◽  
Vol 13 (15) ◽  
pp. 2862
Author(s):  
Yakun Xie ◽  
Dejun Feng ◽  
Sifan Xiong ◽  
Jun Zhu ◽  
Yangge Liu
Keyword(s):  
Remote Sensing ◽  
High Resolution ◽  
Estimation Method ◽  
Absolute Error ◽  
Large Error ◽  
Estimation Methods ◽  
Height Estimation ◽  
Building Height ◽  
Remote Sensing Imagery ◽  
High Resolution Imagery

Accurately building height estimation from remote sensing imagery is an important and challenging task. However, the existing shadow-based building height estimation methods have large errors due to the complex environment in remote sensing imagery. In this paper, we propose a multi-scene building height estimation method based on shadow in high resolution imagery. First, the shadow of building is classified and described by analyzing the features of building shadow in remote sensing imagery. Second, a variety of shadow-based building height estimation models is established in different scenes. In addition, a method of shadow regularization extraction is proposed, which can solve the problem of mutual adhesion shadows in dense building areas effectively. Finally, we propose a method for shadow length calculation combines with the fish net and the pauta criterion, which means that the large error caused by the complex shape of building shadow can be avoided. Multi-scene areas are selected for experimental analysis to prove the validity of our method. The experiment results show that the accuracy rate is as high as 96% within 2 m of absolute error of our method. In addition, we compared our proposed approach with the existing methods, and the results show that the absolute error of our method are reduced by 1.24 m-3.76 m, which can achieve high-precision estimation of building height.

scholarly journals Evaluation of four different HPLC devices for hemoglobinopathy screening

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Müjgan Ercan Karadağ ◽  
Emiş Deniz Akbulut ◽  
Esin Avcı ◽  
Esra Fırat Oğuz ◽  
Saadet Kader ◽  
...  
Keyword(s):  
Gold Standard ◽  
High Performance ◽  
Public Health Problem ◽  
Reference Value ◽  
Comparison Study ◽  
Gold Standard Method ◽  
Blood Samples ◽  
Systematic Biases ◽  
Hemoglobin Variants ◽  
Thalassemia Screening

AbstractObjectiveHemoglobinopathies are a common public health problem in Turkey. In the screening of these disorders in population, cation-exchange high performance liquid chromatography (HPLC) is accepted as the gold standard method. In this study, the aim was to assess four different HPLC devices used in hemoglobinopathy screening.Materials and methodsA total of 58 blood samples were analyzed with four different HPLC methods (Bio-Rad variant II, Agilent 1100, Tosoh G8 and Trinity Ultra2 trademarks).ResultsThe comparison study demonstrated a good correlation between the results of each HPLC analyzer and the reference value obtained by averaging all the HbA2 results belonging to the methods tested in the study [ (Tosoh G8 (r=0.988), Bio-Rad variant II (r=0.993), Agilent 1100 (r=0.98) and Trinity Ultra2 (r=0.992) ]. HbA2 determination in the presence of HbE was interfered in both Bio-Rad variant II and Tosoh G8.ConclusionThe analyzers were found to have compatible HbA2 results but with accompanying different degrees of proportional and systematic biases. HPLC analyzers may be affected by different hemoglobin variants at different HbA2 concentrations, which is an important point to take into consideration during the evaluation of HbA2 results in thalassemia screening.

scholarly journals A New Computational Method for Estimating Simultaneous Equations Models Using Entropy as a Parameter Criteria

Mathematics ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 700
Author(s):  
Belén Pérez-Sánchez ◽  
Martín González ◽  
Carmen Perea ◽  
Jose J. López-Espín
Keyword(s):  
Experimental Study ◽  
Computational Study ◽  
Estimation Method ◽  
Information Criteria ◽  
Simultaneous Equations ◽  
Estimation Methods ◽  
Entropy Measure ◽  
Economic Science ◽  
Akaike Information Criteria ◽  
Simultaneous Equations Models

Simultaneous Equations Models (SEM) is a statistical technique widely used in economic science to model the simultaneity relationship between variables. In the past years, this technique has also been used in other fields such as psychology or medicine. Thus, the development of new estimating methods is an important line of research. In fact, if we want to apply the SEM to medical problems with the main goal being to obtain the best approximation between the parameters of model and their estimations. This paper shows a computational study between different methods for estimating simultaneous equations models as well as a new method which allows the estimation of those parameters based on the optimization of the Bayesian Method of Moments and minimizing the Akaike Information Criteria. In addition, an entropy measure has been calculated as a parameter criteria to compare the estimation methods studied. The comparison between those methods is performed through an experimental study using randomly generated models. The experimental study compares the estimations obtained by the different methods as well as the efficiency when comparing solutions by Akaike Information Criteria and Entropy Measure. The study shows that the proposed estimation method offered better approximations and the entropy measured results more efficiently than the rest.

scholarly journals Bio-Inspired Covert Active Sonar Strategy

Sensors ◽  
2018 ◽  
Vol 18 (8) ◽  
pp. 2436 ◽  
Author(s):  
Jiajia Jiang ◽  
Xianquan Wang ◽  
Fajie Duan ◽  
Chunyue Li ◽  
Xiao Fu ◽  
...  
Keyword(s):  
Marine Mammals ◽  
Estimation Method ◽  
Sperm Whale ◽  
Waveform Design ◽  
Velocity Estimation ◽  
Estimation Methods ◽  
Range Resolution ◽  
Active Sonar ◽  
Ocean Noise ◽  
Underwater Target

The covertness of the active sonar is a very important issue and the sonar signal waveform design problem was studied to improve covertness of the system. Many marine mammals produce call pulses for communication and echolocation, and existing interception systems normally classify these biological signals as ocean noise and filter them out. Based on this, a bio-inspired covert active sonar strategy was proposed. The true, rather than man-made sperm whale, call pulses were used to serve as sonar waveforms so as to ensure the camouflage ability of sonar waveforms. A range and velocity measurement combination (RVMC) was designed by using two true sperm whale call pulses which had excellent range resolution (RR) and large Doppler tolerance (DT). The range and velocity estimation methods were developed based on the RVMC. In the sonar receiver, the correlation technology was used to confirm the start and end time of sonar signals and their echoes, and then based on the developed range and velocity estimation method, the range and velocity of the underwater target were obtained. Then, the RVMC was embedded into the true sperm whale call-train to improve the camouflage ability of the sonar signal-train. Finally, experiment results were provided to verify the performance of the proposed method.

scholarly journals Experimental Verification of Real-Time Flow-Rate Estimations in a Tilting-Ladle-Type Automatic Pouring Machine

2021 ◽  
Vol 11 (15) ◽  
pp. 6701
Author(s):  
Yuta Sueki ◽  
Yoshiyuki Noda
Keyword(s):  
Real Time ◽  
Molten Metal ◽  
Flow Rate ◽  
Kalman Filters ◽  
Estimation Method ◽  
Estimation Methods ◽  
Liquid Volume ◽  
Model Parameters ◽  
Rate Estimation ◽  
Time Flow

This paper discusses a real-time flow-rate estimation method for a tilting-ladle-type automatic pouring machine used in the casting industry. In most pouring machines, molten metal is poured into a mold by tilting the ladle. Precise pouring is required to improve productivity and ensure a safe pouring process. To achieve precise pouring, it is important to control the flow rate of the liquid outflow from the ladle. However, due to the high temperature of molten metal, directly measuring the flow rate to devise flow-rate feedback control is difficult. To solve this problem, specific flow-rate estimation methods have been developed. In the previous study by present authors, a simplified flow-rate estimation method was proposed, in which Kalman filters were decentralized to motor systems and the pouring process for implementing into the industrial controller of an automatic pouring machine used a complicatedly shaped ladle. The effectiveness of this flow rate estimation was verified in the experiment with the ideal condition. In the present study, the appropriateness of the real-time flow-rate estimation by decentralization of Kalman filters is verified by comparing it with two other types of existing real-time flow-rate estimations, i.e., time derivatives of the weight of the outflow liquid measured by the load cell and the liquid volume in the ladle measured by a visible camera. We especially confirmed the estimation errors of the candidate real-time flow-rate estimations in the experiments with the uncertainty of the model parameters. These flow-rate estimation methods were applied to a laboratory-type automatic pouring machine to verify their performance.

Sign in / Sign up

Export Citation Format

Share Document