scholarly journals Some of the Physical and Mechanical Properties of Particleboard Made from Betung Bamboo (Dendrocalamus asper)

2021 ◽  
Vol 11 (8) ◽  
pp. 3682
Author(s):  
Lina Karlinasari ◽  
Prabu Setia Sejati ◽  
Ulfa Adzkia ◽  
Arinana Arinana ◽  
Salim Hiziroglu
Keyword(s):  
Mechanical Properties ◽  
Bond Strength ◽  
Internal Bond ◽  
Fine Particles ◽  
Value Added ◽  
Physical And Mechanical Properties ◽  
Internal Bond Strength ◽  
Density Level ◽  
Coarse Particles ◽  
Dendrocalamus Asper

The objective of this study was to evaluate various physical and mechanical properties of experimental particleboard panels made from Asian giant bamboo (Dendrocalamus asper). Single layer panels having a density level of 0.75 g/cm3 from coarse and fine particles were used within the scope of this study. Thickness swelling, water absorption, surface roughness, and wettability characteristics of the samples were tested as physical properties while bending, internal bond strength, and screw withdrawal strength of the panels were considered for their mechanical properties. Resistance of the panels against termite and fungus were also determined. Based on the findings in the work both physical and mechanical properties of the panels made from coarse particles resulted in higher values than those made from fine particles with the exception of their internal bond strength. It appears that using fine particles in the panels enhanced their overall surface quality as well as wettability. Regarding biological deterioration of the samples, those made with coarse particles had better resistance. It seems that giant bamboo as a non-wood lignocellulosic species would have potential to be used as raw material to the manufacture value added particleboard with accepted characteristics.

scholarly journals Sifat Papan Partikel Bambu Petung (Dendrocalamus asper) dan Bambu Wulung (Gigantochloa atroviolacea) dengan Perlakuan Ekstraksi

2020 ◽  
Vol 14 (1) ◽  
pp. 84
Author(s):  
Ragil Widyorini ◽  
Ikhwan Syahri ◽  
Greitta Kusuma Dewi
Keyword(s):  
Citric Acid ◽  
Bond Strength ◽  
Internal Bond ◽  
Cold Water ◽  
Internal Bond Strength ◽  
Modulus Of Rupture ◽  
Bamboo Species ◽  
Japanese Industrial Standard ◽  
Dendrocalamus Asper ◽  
Extraction Treatment

Bambu memiliki kandungan ekstraktif dengan persentase yang berbeda antar jenis bambu. Penelitian ini bertujuan untuk mengetahui pengaruh perlakuan ekstraksi pada jenis bambu yang berbeda terhadap sifat papan partikel. Dua jenis bambu digunakan yaitu Bambu Petung (Dendrocalamus asper) dan Bambu Wulung (Gigantochloa atroviolacea). Perlakuan ekstraksi digunakan pada partikel bambu sebelum proses pembuatan papan partikel yaitu tanpa ekstraksi, ekstraksi air dingin dan ekstraksi air panas. Papan partikel dibuat dalam ukuran 25 cm x 25 cm x 0,7 cm, target kerapatan 0,9 g/cm3, jumlah asam sitrat 30%, serta kondisi pengempaan suhu 180°C selama 10 menit. Hasil penelitian menunjukkan bahwa interaksi perlakuan ekstraksi dan jenis bambu hanya berpengaruh signifikan pada sifat penyerapan air dan keteguhan rekat internal, sedangkan jenis bambu berpengaruh signifikan pada nilai kadar air, modulus patah dan modulus elastisitas. Semua papan partikel yang dihasilkan memenuhi standar Japanese Industrial Standard (JIS) A 5908 tipe 13. Pada penelitian ini, papan partikel dari bambu wulung tanpa perlakuan ekstraksi mempunyai nilai yang memenuhi standar tipe 18 dan berpotensi sebagai bahan baku untuk produk furnitur eksterior. Perlakuan ekstraksi dapat meningkatkan secara signifikan nilai keteguhan rekat internal papan partikel bambu petung, walaupun secara umum dengan jumlah asam sitrat 30% perlakuan tersebut tidak diperlukan pada papan partikel bambu Properties of Particleboard made from Petung Bamboo (Dendrocalamus asper) and Wulung Bamboo (Gigantochloa atroviolacea) Particles with Extraction TreatmentAbstractBamboo has extractives, which the percentage of extractive was different based on bamboo species. This research aimed to investigate the effect of extraction treatment at different bamboo species on the particleboard properties. Two types of bamboo were used, i.e. Petung bamboo (Dendrocalamus asper) and Wulung bamboo (Gigantochloa atroviolacea). Three extraction treatments were conducted to the bamboo particles before the particleboard manufacture, i.e. unextracted, cold-water extraction, and hot-waterextraction. The particleboard was made in the size of 25 cm x 25 cm x 0.7 cm, target density of 0.9 g/cm³, citric acid content of 30%, and pressing temperature of 180°C for 10 min. The results showed that the interaction between extraction treatment and bamboo species significantly affected on the water absorption and internal bond strength, however bamboo species affected significantly on the moisture content, modulus of rupture, and modulus of elasticity. All of particleboards could met the requirement of the 13 type of Japanese Industrial Standard (JIS) A 5908. In this research, particleboards made from wulung bamboo particles without extraction treatment have properties that met the requirement of the 18 type and the products have potential to be as exterior materials for furniture. In general, an extraction treatment was not an important step on the manufacturing of bamboo particleboard using citric acid 30% as adhesive. However, the extraction treatment could increase significantly the internal bond strength of particleboard made from petung bamboo.

scholarly journals Influence of Adding Offcuts and Trims with a Recycling Approach on the Properties of High-Density Fibrous Composites

Polymers ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 1327
Author(s):  
Conrad M. Sala ◽  
Eduardo Robles ◽  
Grzegorz Kowaluk
Keyword(s):  
Mechanical Properties ◽  
Bond Strength ◽  
Water Absorption ◽  
Internal Bond ◽  
High Density ◽  
Raw Material ◽  
Internal Bond Strength ◽  
Fibrous Composites ◽  
Thickness Swelling ◽  
Linear Decrease

The sizeable global production of wood-based products requires new sources of raw material, but also creates large quantities of wastes or composites that do not comply with requirements. In this study, the influence of different shares of recovered high-density fiberboards (HDF-r), reversed into the production, on industrial HDF properties, has been examined. HDF-r may be a suitable partial substitute for raw pinewood for industrial HDF production. Although most of the mechanical properties, as well as thickness swelling and water absorption, had a linear decrease with the increase in the share of HDF-r share, the elaborated boards met most of the commercial requirements (EN 622-5). The property that did not meet the requirements was the internal bond strength for panels with 10% of HDF-r. The presented results show that, after some adjustments, it should be possible to produce HDF boards with up to 10% of recycled HDF being able to meet all commercial requirements.

scholarly journals EFFECTS OF POLYMER ADDITIVES ON SOME MECHANICAL AND PHYSICAL PROPERTIES OF CEMENT BONDED PARTICLEBOARDS

Wood Research ◽  
2021 ◽  
Vol 66 (3) ◽  
pp. 331-340
Author(s):  
HASAN HÜSEYİN TAŞ ◽  
BİLGE ARSLAN ◽  
HÜLYA KALAYCIOĞLU
Keyword(s):  
Bond Strength ◽  
Water Absorption ◽  
Internal Bond ◽  
Bending Strength ◽  
Physical And Mechanical Properties ◽  
Bending Stiffness ◽  
Internal Bond Strength ◽  
Polymer Additives ◽  
Thickness Swelling ◽  
Cement Mixture

The effects of some polymer additives, also called super plasticizers, on selected physical and mechanical properties of cement bonded particle board were investigated. Two different kinds of poly carboxylic ether (PF300, DX40) and a melamine based polymer (300M) were added to the wood cement mixture. The ratios of polymer additives to the wood cement mixture were 1%, 1.2% and 1.4%. Cement bonded particleboards were manufactured with wood/cement (w/w) ratio of 1:3; target density of 1300 kg.m-3, and CaCl2 content of 5%. The cement bonded particleboards were tested for water absorption (2 and 24 hour), thickness swelling (2 and 24 hour), bending stiffness and strength and internal bond strength. Results of the study showed that most of the polymer addition decreased water absorption and thickness swelling of the boards. Replacement of cement with polymers increased internal bond strength and bending stiffness of the boards while bending strength was slightly reduced. Use of small amount of super plasticizers significantly improves most of the board properties.

Mechanical Properties of Homogenous and Heterogeneous Three Layered Particleboard Composite in Relation on Different Resin Content

2013 ◽  
Vol 699 ◽  
pp. 637-640 ◽  
Author(s):  
Siti Noorbaini Sarmin ◽  
Shaikh Abdul Karim Yamani Zakaria ◽  
Jamaludin Kasim
Keyword(s):  
Mechanical Properties ◽  
Bond Strength ◽  
Internal Bond ◽  
Bending Strength ◽  
Urea Formaldehyde ◽  
Acacia Mangium ◽  
Resin Content ◽  
Internal Bond Strength ◽  
Japanese Industrial Standard

Two types of three layered particleboard composite, homogeneous (Acacia mangium core-face/back) and heterogeneous (Acacia mangium core, mixed sawdust face/back) were fabricated with three different resin contents and densities. Three different resin content; 8:10:8, 10:10:10 and 12:10:12, were use with 500, 600 and 700kg/m3 board densities. Urea Formaldehyde (UF) was used as a binder and 1% of wax was added. The properties of bending strength (MOR & MOE) and internal bond strength (IB) were evaluated based on Japanese Industrial Standard; JIS A 5908:2003 Particleboard (2003). The results showed that there were relationship between resin contents and densities on homogeneous and heterogeneous particleboard composites. Result obtained indicated that bending and internal bond strength of homogeneous composite bonded using ratio of 12:10:12 resin content with 700kg/m3 density was better compared to ratio of 8:10:8 and 10:10:10 resin contents. When the densities were increased, the mechanical properties also increased.

The Silorane-based Resin Composites: A Review

2017 ◽  
Vol 42 (1) ◽  
pp. E24-E34 ◽  
Author(s):  
GA Maghaireh ◽  
NA Taha ◽  
H Alzraikat
Keyword(s):  
Mechanical Properties ◽  
Bond Strength ◽  
Clinical Significance ◽  
Physical And Mechanical Properties ◽  
Marginal Adaptation ◽  
Resin Composites ◽  
Restorative Material ◽  
Polymerization Shrinkage ◽  
Tooth Structure

SUMMARY This article aims to review the research done on the silorane-based resin composites (SBRC) regarding polymerization shrinkage and contraction stresses and their ability to improve the shortcomings of the methacrylate-based resin composites (MRBC). Special attention is given to their physical and mechanical properties, bond strength, marginal adaptation, and cusp deflection. The clinical significance of this material is critically appraised with a focus on the ability of SBRC to strengthen the tooth structure as a direct restorative material. A search of English peer-reviewed dental literature (2003-2015) from PubMed and MEDLINE databases was conducted with the terms “low shrinkage” and “silorane composites.” The list was screened, and 70 articles that were relevant to the objectives of this work were included.

scholarly journals Some advantages of three-layer medium-density fibreboard as compared to the traditional single-layer one

2019 ◽  
Vol 65 (1) ◽  
Author(s):  
Turgay Akbulut ◽  
Nadir Ayrilmis
Keyword(s):  
Bond Strength ◽  
Internal Bond ◽  
Single Layer ◽  
Middle Layer ◽  
Resin Content ◽  
Internal Bond Strength ◽  
Medium Density ◽  
Medium Density Fibreboard ◽  
Uf Resin ◽  
Layer Medium

Abstract The aim of the study was to develop three-layer medium-density fibreboard (MDF) manufacture by adding the coarse fibres in the middle layer, like three-layer particleboard. The liquid urea–formaldehyde (UF) resin was reduced from 10.5 to 6.5 wt% in the middle layer of the MDFs. The UF resin content was kept constant at 10 wt% in the surface layers of all the MDFs. Moreover, the average density of MDFs was decreased from 730 to 650 kg/m3. The internal bond strength of three-layer MDFs decreased with decreasing UF resin content (10.5 to 8.5 wt%) in the middle layer. However, the decreases in the internal bond strength were statistically not significant. The internal bond strength values of the MDFs having density between 730 and 675 kg/m3 did not show significant differences. The cost savings of the resin were 20% when the amount of resin was reduced from 10.5 to 8.5 wt%. Three-layer MDFs had lower resin consumption at lower densities over traditional single-layer MDFs produced in the same plant with the same material components without decreasing their technological properties. In conclusion, it can be said that three-layer MDF could be produced at a lower cost than traditional single-layer MDF.

scholarly journals Comparison of physical and mechanical properties of mining waste with a grain size up to 2 mm reinforced with cement CEM I and CEM III

2019 ◽  
Vol 106 ◽  
pp. 01023
Author(s):  
Justyna Morman-Wątor
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Fine Particles ◽  
Physical And Mechanical Properties ◽  
Mining Waste ◽  
Soil Testing ◽  
Mechanical Parameters ◽  
Freeze Resistance

The article presents the results of tests for mining waste mixtures - cement. The addition of cement was aimed at limiting the leaching of fine particles and improving physical and mechanical parameters. The studies used cement CEM I 42.5 R and CEM III/ A 42.5N - LH / HSR / NA and plasticizing sealant. The paper presents the results of freeze resistance, swelling tests, pH of water leachate and oedometer soil testing.

Sign in / Sign up

Export Citation Format

Share Document