scholarly journals Torque Requirements and the Influence of Pilot Holes on Orthodontic Miniscrew Microdamage

2021 ◽  
Vol 11 (8) ◽  
pp. 3564
Author(s):  
Sven W. Jensen ◽  
Emilija D. Jensen ◽  
Wayne Sampson ◽  
Craig Dreyer

This study aimed to quantify the microdamage to cortical bone of different thickness and the maximum insertion torque during orthodontic miniscrew implant (OMI) placement with and without a pilot hole. Forty-five porcine bone specimens were prepared with thicknesses of 1.5, 2 and 2.5 mm. Ten bone specimens per thickness had a pilot hole drilled prior to the insertion of an OMI, and the remaining 15 bone specimens had an OMI without a pilot hole inserted. Sequential staining was used to identify damage caused by bone preparation and surface microdamage from OMI insertion and confocal laser microscopy images were used to quantify damage characteristics. Of the five damage characteristics, only one decreased when a pilot hole was used for all bone specimens (p = 0.025), while two increased as cortical bone thickness increased (p = 0.0064, p = 0.0003). There was no evidence that maximum insertion torque differed according to pilot hole status (p = 0.1144) and increased as cortical bone thickness increased (p = 0.0001). The presence of a pilot hole had minimal effect on microdamage characteristics and no effect on maximum insertion torque. As cortical bone thickness increased, an increase in microdamage and in maximum insertion torque was observed.

2011 ◽  
Vol 139 (4) ◽  
pp. 495-503 ◽  
Author(s):  
David Farnsworth ◽  
P. Emile Rossouw ◽  
Richard F. Ceen ◽  
Peter H. Buschang

2017 ◽  
Vol 87 (5) ◽  
pp. 745-751 ◽  
Author(s):  
Riccardo Nucera ◽  
Antonino Lo Giudice ◽  
Angela Mirea Bellocchio ◽  
Paola Spinuzza ◽  
Alberto Caprioglio ◽  
...  

ABSTRACT Objective: To analyze the buccal bone thickness, bone depth, and cortical bone depth of the mandibular buccal shelf (MBS) to determine the most suitable sites of the MBS for mini-screw insertion. Materials and Methods: The sample included cone-beam computed tomographic (CBCT) records of 30 adult subjects (mean age 30.9 ± 7.0 years) evaluated retrospectively. All CBCT examinations were performed with the i-CAT CBCT scanner. Each exam was converted into DICOM format and processed with OsiriX Medical Imaging software. Proper view sections of the MBS were obtained for quantitative and qualitative evaluation of bone characteristics. Results: Mesial and distal second molar root scan sections showed enough buccal bone for mini-screw insertion. The evaluation of bone depth was performed at 4 and 6 mm buccally to the cementoenamel junction. The mesial root of the mandibular second molar at 4 and 6 mm showed average bone depths of 18.51 mm and 14.14 mm, respectively. The distal root of the mandibular second molar showed average bone depths of 19.91 mm and 16.5 mm, respectively. All sites showed cortical bone depth thickness greater than 2 mm. Conclusions: Specific sites of the MBS offer enough bone quantity and adequate bone quality for mini-screw insertion. The insertion site with the optimal anatomic characteristics is the buccal bone corresponding to the distal root of second molar, with screw insertion 4 mm buccal to the cementoenamel junction. Considering the cortical bone thickness of optimal insertion sites, pre-drilling is always recommended in order to avoid high insertion torque.


2013 ◽  
Vol 35 (6) ◽  
pp. 766-771 ◽  
Author(s):  
T. M. Meira ◽  
O. M. Tanaka ◽  
M. M. Ronsani ◽  
I. T. Maruo ◽  
O. Guariza-Filho ◽  
...  

2007 ◽  
Vol 77 (6) ◽  
pp. 979-985 ◽  
Author(s):  
Young-Youn Song ◽  
Jung-Yul Cha ◽  
Chung-Ju Hwang

Abstract Objective: To evaluate the effect of cortical bone thickness on the maximum insertion and removal torque of different types of self-drilling mini-screws and to determine if torque depends on the screw design. Materials and Methods: Three different types of self-drilling mini-screws (cylindrical type [Cl], taper type [Ta], taper type [Tb]) were inserted with the use of a driving torque tester at a constant speed of 3 rotations per minute. Experimental bone blocks with different cortical bone thicknesses were used as specimens. Results: Differences in the cortical bone thickness had little effect on the maximum insertion and removal torque in Cl. However, with Ta and Tb, the maximum insertion torque increased as the cortical bone thickness increased. The maximum insertion torque of Tb was highest in all situations, followed by Ta and Tb, in that order. Cl showed less torque loss in all cortical bone thicknesses and a longer removal time compared to Ta or Tb. There were significant relationships between cortical bone thickness, maximum insertion and removal torque, and implantation time in each type of self-drilling mini-screw. Conclusion: Since different screw designs showed different insertion torques with increases in cortical bone thickness, the suitable screw design should be selected according to the cortical thickness at the implant site.


2021 ◽  
Vol 80 (Suppl 1) ◽  
pp. 825.2-826
Author(s):  
M. Jansen ◽  
A. Ooms ◽  
T. D. Turmezei ◽  
J. W. Mackay ◽  
S. Mastbergen ◽  
...  

Background:In addition to cartilage degeneration, knee osteoarthritis (OA) causes bone changes, including cortical bone thickening, subchondral bone density decrease, and bone shape changes as a result of widening and flattening condyles and osteophyte formation. Knee joint distraction (KJD) is a joint-preserving treatment for younger (<65 years) knee OA patients that has been shown to reverse OA cartilage degradation. On radiographs, KJD showed a decrease in subchondral bone density and an increase in osteophyte formation. However, these bone changes have never been evaluated with a 3D imaging technique.Objectives:To evaluate cortical bone thickness, subchondral trabecular bone density, and bone shape on CT scans before and one year after KJD treatment.Methods:19 KJD patients were included in an extended imaging protocol, undergoing a CT scan before and one year after treatment. Stradview v6.0 was used for semi-automatic tibia and femur segmentation from axial thin-slice (0.45mm) CT scans. Cortical bone thickness (mm) and trabecular bone density (Hounsfield units, HU) were measured with an automated algorithm. Osteophytes were excluded. Afterwards, wxRegSurf v18 was used for surface registration. Registration data was used for bone shape measurements. MATLAB R2020a and the SurfStat MATLAB package were used for data analysis and visualization. Two-tailed F-tests were used to calculate changes over time. Two separate linear regression models were used to show the influence of baseline Kellgren-Lawrence grade and sex on the changes over time. Statistical significance was calculated with statistical parametric mapping; a p-value <0.05 was considered statistically significant. Bone shape changes were explored visually using vertex by vertex displacements between baseline and follow-up. Patients were separated into two groups based on whether their most affected compartment (MAC) was medial or lateral. Only patients with axial CT scans at both time points available for analysis were included for evaluation.Results:3 Patients did not have complete CTs and in 1 patient the imaged femur was too short, leaving 16 patients for tibial analyses and 15 patients for femoral analyses. The MAC was predominantly the medial side (medial MAC n=14; lateral n=2). Before treatment, the MAC cortical bone was compared to the rest of the joint (Figure 1). One year after treatment, MAC cortical thickness decreased, although this decrease of up to approximately 0.25 mm was not statistically significant. The trabecular bone density was also higher before treatment in the MAC, and a decrease was seen throughout the entire joint, although statistically significant only for small areas on mostly the MAC where this decrease was up to approximately 80 HU (Figure 1). Female patients and patients with a higher Kellgren-Lawrence grade showed a somewhat larger decrease in cortical bone thickness. Trabecular density decreased less for patients with a higher Kellgren-Lawrence grade, and female patients showed a higher density decrease interiorly while male patients showed a higher decrease exteriorly. None of this was statistically significant. The central areas of both compartments showed an outward shape change, while the outer ring showed inward changes.Conclusion:MAC cortical bone thickness shows a partial decrease after KJD. Trabecular bone density decreased on both sides of the joint, likely as a direct result of the bicompartmental unloading. For both subchondral bone parameters, MAC values became more similar to the LAC, indicating (partial) subchondral bone normalization in the most affected parts of the joint. The bone shape changes may indicate a reversal of typical OA changes, although the inward difference that was seen on the outer edges may be a result of osteophyte-related changes that might have affected the bone segmentation. In conclusion, KJD treatment shows subchondral bone normalization in the first year after treatment, and longer follow-up might show whether these changes are a temporary result of joint unloading or indicate more prolonged bone changes.Disclosure of Interests:None declared.


Sign in / Sign up

Export Citation Format

Share Document