scholarly journals Comparative Study of Aortic Wall Stress According to Geometric Parameters in Abdominal Aortic Aneurysms

2021 ◽  
Vol 11 (7) ◽  
pp. 3195
Author(s):  
Ji-Hun You ◽  
Chung Won Lee ◽  
Up Huh ◽  
Chi-Seung Lee ◽  
Dongman Ryu
Keyword(s):  
Aortic Rupture ◽  
Wall Stress ◽  
Aortic Aneurysms ◽  
Aortic Tissue ◽  
Factors Affecting ◽  
Abdominal Aortic ◽  
Geometric Factors ◽  
Measurement Results ◽  
Simulation Scenario ◽  
Peak Wall Stress

In abdominal aortic aneurysm (AAA), the rupture of the aortic tissue is directly related to wall stress. Thus, the investigation of maximum wall stress is a necessary procedure to predict the aortic rupture in AAA. In this study, computational simulations were performed to investigate the correlation between peak wall stress (PWS) and AAA geometry. The Holzapfel model and various orientations of the collagen fibers and thicknesses of the layers of the aorta were employed in the simulation. The material constants used in the Holzapfel model were estimated from the examination and analysis of the biaxial tensile test results of the normal abdominal aorta and AAA. The aneurysm diameter, height, neck angle, and iliac angle were selected as geometric factors affecting the AAA rupture. In addition, a simulation scenario was conceived and created based on the measurement results using the computed tomography data of patients with AAA. Accordingly, the correlation between the PWS and AAA geometry was estimated.

scholarly journals Peak wall stress measurement in elective and acute abdominal aortic aneurysms

2008 ◽  
Vol 47 (1) ◽  
pp. 17-22 ◽  
Author(s):  
Michael S. Heng ◽  
Michael J. Fagan ◽  
Jason W. Collier ◽  
Grishma Desai ◽  
Peter T. McCollum ◽  
...  
Keyword(s):  
Stress Measurement ◽  
Wall Stress ◽  
Abdominal Aortic Aneurysms ◽  
Aortic Aneurysms ◽  
Abdominal Aortic ◽  
Peak Wall Stress

scholarly journals High-frequency murine ultrasound provides enhanced metrics of BAPN-induced AAA growth

2019 ◽  
Vol 317 (5) ◽  
pp. H981-H990 ◽  
Author(s):  
Daniel J. Romary ◽  
Alycia G. Berman ◽  
Craig J. Goergen
Keyword(s):  
Surface Area ◽  
Murine Model ◽  
High Frequency ◽  
Wall Stress ◽  
Growth Patterns ◽  
Aortic Aneurysms ◽  
Maximum Diameter ◽  
Rupture Risk ◽  
Abdominal Aortic ◽  
Peak Wall Stress

An abdominal aortic aneurysm (AAA), defined as a pathological expansion of the largest artery in the abdomen, is a common vascular disease that frequently leads to death if rupture occurs. Once diagnosed, clinicians typically evaluate the rupture risk based on maximum diameter of the aneurysm, a limited metric that is not accurate for all patients. In this study, we worked to evaluate additional distinguishing factors between growing and stable murine aneurysms toward the aim of eventually improving clinical rupture risk assessment. With the use of a relatively new mouse model that combines surgical application of topical elastase to cause initial aortic expansion and a lysyl oxidase inhibitor, β-aminopropionitrile (BAPN), in the drinking water, we were able to create large AAAs that expanded over 28 days. We further sought to develop and demonstrate applications of advanced imaging approaches, including four-dimensional ultrasound (4DUS), to evaluate alternative geometric and biomechanical parameters between 1) growing AAAs, 2) stable AAAs, and 3) nonaneurysmal control mice. Our study confirmed the reproducibility of this murine model and found reduced circumferential strain values, greater tortuosity, and increased elastin degradation in mice with aneurysms. We also found that expanding murine AAAs had increased peak wall stress and surface area per length compared with stable aneurysms. The results from this work provide clear growth patterns associated with BAPN-elastase murine aneurysms and demonstrate the capabilities of high-frequency ultrasound. These data could help lay the groundwork for improving insight into clinical prediction of AAA expansion. NEW & NOTEWORTHY This work characterizes a relatively new murine model of abdominal aortic aneurysms (AAAs) by quantifying vascular strain, stress, and geometry. Furthermore, Green-Lagrange strain was calculated with a novel mapping approach using four-dimensional ultrasound. We also compared growing and stable AAAs, finding peak wall stress and surface area per length to be most indicative of growth. In all AAAs, strain and elastin health declined, whereas tortuosity increased.

A Comparative Study of Biomechanical and Geometrical Attributes of Abdominal Aortic Aneurysms in the Asian and Caucasian Populations

2020 ◽  
Vol 142 (6) ◽  
Author(s):  
Tejas Canchi ◽  
Sourav S. Patnaik ◽  
Hong N. Nguyen ◽  
E. Y. K. Ng ◽  
Sriram Narayanan ◽  
...  
Keyword(s):  
Wall Thickness ◽  
Gaussian Curvature ◽  
Wall Stress ◽  
Aneurysm Rupture ◽  
Aortic Aneurysms ◽  
Patient Specific ◽  
Backward Elimination ◽  
Abdominal Aortic ◽  
Highly Correlated ◽  
Peak Wall Stress

Abstract In this work, we provide a quantitative assessment of the biomechanical and geometric features that characterize abdominal aortic aneurysm (AAA) models generated from 19 Asian and 19 Caucasian diameter-matched AAA patients. 3D patient-specific finite element models were generated and used to compute peak wall stress (PWS), 99th percentile wall stress (99th WS), and spatially averaged wall stress (AWS) for each AAA. In addition, 51 global geometric indices were calculated, which quantify the wall thickness, shape, and curvature of each AAA. The indices were correlated with 99th WS (the only biomechanical metric that exhibited significant association with geometric indices) using Spearman's correlation and subsequently with multivariate linear regression using backward elimination. For the Asian AAA group, 99th WS was highly correlated (R2 = 0.77) with three geometric indices, namely tortuosity, intraluminal thrombus volume, and area-averaged Gaussian curvature. Similarly, 99th WS in the Caucasian AAA group was highly correlated (R2 = 0.87) with six geometric indices, namely maximum AAA diameter, distal neck diameter, diameter–height ratio, minimum wall thickness variance, mode of the wall thickness variance, and area-averaged Gaussian curvature. Significant differences were found between the two groups for ten geometric indices; however, no differences were found for any of their respective biomechanical attributes. Assuming maximum AAA diameter as the most predictive metric for wall stress was found to be imprecise: 24% and 28% accuracy for the Asian and Caucasian groups, respectively. This investigation reveals that geometric indices other than maximum AAA diameter can serve as predictors of wall stress, and potentially for assessment of aneurysm rupture risk, in the Asian and Caucasian AAA populations.

Effect of Intraluminal Thrombus on Wall Stress and Growth Rate of Abdominal Aneurysms

2010 ◽  
Author(s):  
Lambert Speelman ◽  
E. Marielle H. Bosboom ◽  
Geert Willem H. Schurink ◽  
Jaap Buth ◽  
Marcel Breeuwer ◽  
...  
Keyword(s):  
Risk Estimation ◽  
Wall Stress ◽  
Aortic Aneurysms ◽  
Maximum Diameter ◽  
Intraluminal Thrombus ◽  
Abdominal Aortic ◽  
Risk Of Rupture ◽  
Peak Wall Stress ◽  
Higher Sensitivity ◽  
Main Factor

In the decision for surgical repair of abdominal aortic aneurysms (AAAs), the risk of rupture is weighed carefully against the risk of the surgical procedure. Currently, AAA diameter is the main factor that determines the decision for surgery. However, in rupture risk estimation AAA wall stress has higher sensitivity and specificity than maximum diameter [1]. Moreover, peak wall stress was higher for ruptured than for non-ruptured or asymptomatic AAAs [2, 3].

Porohyperelastic Simulation of Abdominal Aortic Aneurysms

2008 ◽  
Author(s):  
Avinash Ayyalasomayajula ◽  
Bruce R. Simon ◽  
Jonathan P. Vande Geest
Keyword(s):  
Wall Stress ◽  
Aortic Aneurysms ◽  
Maximum Diameter ◽  
Patient Specific ◽  
Infrarenal Aorta ◽  
Stress Studies ◽  
Abdominal Aortic ◽  
Peak Wall Stress ◽  
Work Done

Abdominal aortic aneurysm (AAA) is a progressive dilation of the infrarenal aorta and results in a significant alteration in local hemodynamic environment [1]. While an aneurysmal diameter of 5.5cm is typically classified as being of high risk, recent studies have demonstrated that maximum wall stress could be a better indicator of an AAA rupture than maximum diameter [2]. The wall stress is greatly influenced by the blood pressure, aneurysm diameter, shape, wall thickness and the presence of thrombus. The work done by Finol et al. suggested that hemodynamic pressure variations have an insignificant effect on AAA wall stress and that primarily the shape of the aneurysm determines the stress distribution. They noted that for peak wall stress studies the static pressure conditions would suffice as the in vivo conditions. Wang et al have developed an isotropic hyperelastic constitutive model for the intraluminal thrombus (ILT). Such models have been used to study the stress distributions in patient specific AAAs [3, 4].

Anisotropic Wall Mechanics of Abdominal Aortic Aneurysms

2008 ◽  
Author(s):  
Giampaolo Martufi ◽  
Jose F. Rodriguez ◽  
Ender A. Finol
Keyword(s):  
Three Dimensional ◽  
Wall Stress ◽  
Aortic Aneurysms ◽  
Constitutive Law ◽  
Intraluminal Pressure ◽  
Aortic Tissue ◽  
Unruptured Aneurysms ◽  
Abdominal Aortic ◽  
Dimensional Reconstruction ◽  
Tissue Specimens

The prevalence of AAA is growing along with population age and according to different studies AAA rupture is the 13th most common cause of death in the U.S., causing an estimated 15,000 deaths per year. In biomechanical terms, AAA rupture is a phenomenon that occurs when the developing mechanical stresses within the aneurysm inner wall, as a result of the exerted intraluminal pressure, exceed the failure strength of the aortic tissue. To obtain a reliable estimation of wall stress, it is necessary to perform an accurate three-dimensional reconstruction of the AAA geometry and model an appropriate constitutive law for the aneurysmal tissue material characterization. In this regard, a recent study on the biaxial mechanical behavior of human AAA tissue specimens [1] demonstrates that aneurysmal arterial tissue behaves mechanically anisotropic. The objectives of the present work are to determine the effect of material anisotropy of the aneurysmal abdominal aorta on wall stress distribution and to establish a comparison of wall mechanics between ruptured and unruptured aneurysms.

scholarly journals Peak Wall Stress Does Not Necessarily Predict the Location of Rupture in Abdominal Aortic Aneurysms

2010 ◽  
Vol 39 (3) ◽  
pp. 302-304 ◽  
Author(s):  
E. Georgakarakos ◽  
C.V. Ioannou ◽  
Y. Papaharilaou ◽  
T. Kostas ◽  
D. Tsetis ◽  
...  
Keyword(s):  
Wall Stress ◽  
Abdominal Aortic Aneurysms ◽  
Aortic Aneurysms ◽  
Abdominal Aortic ◽  
Peak Wall Stress
Sign in / Sign up

Export Citation Format

Share Document