scholarly journals An Innovative Approach to Accuracy of Co-Seismic Surface Displacement Detection Using Satellite GNSS Technology

2021 ◽  
Vol 11 (6) ◽  
pp. 2800
Author(s):  
Hana Staňková ◽  
Jakub Kostelecký ◽  
Miroslav Novosad
Keyword(s):  
Time Series ◽  
Surface Displacement ◽  
Satellite System ◽  
Dual Approach ◽  
Seismic Displacement ◽  
Accuracy Of Measurements ◽  
Before And After ◽  
Using Data ◽  
Global Navigation Satellite ◽  
Seismic Models

This paper discusses a new method for determining co-seismic displacement using the Global Navigation Satellite System (GNSS) for the precise detection of positional changes at permanent stations after an earthquake. Positioning by the Precise Point Positioning (PPP) method is undertaken using data from the GNSS satellites and one designated station. A time series is processed by an anharmonic analysis before and after an earthquake and these one-day solutions increase the accuracy of measurements. The co-seismic static displacement can be precisely detected from the analysed time series before and after the earthquake, which can be used for the verification of seismic models. Reliability of the estimation of the size of the co-seismic offset is given by the mean square error (RMSE) of the shift. In this study, RMSE was determined by two approaches, initially from variances within PPP processing, and secondly when no positional change from the GNSS before or after the earthquake was assumed. The variance of the data in the time series gives a more realistic estimate of RMSE. This dual approach can affect seismological interpretation due to the need for the interpreting geophysicists to determine which case of co-seismic displacement is more probable for any given locality. The second approach has been shown to provide a more realistic co-seismic displacement accuracy in this study.

scholarly journals Independent Component Extraction from the Incomplete Coordinate Time Series of Regional GNSS Networks

Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1569
Author(s):  
Tengfei Feng ◽  
Yunzhong Shen ◽  
Fengwei Wang
Keyword(s):  
Time Series ◽  
Missing Data ◽  
Satellite System ◽  
Independent Component ◽  
Independent Components ◽  
North East ◽  
The North ◽  
Before And After ◽  
Original Time ◽  
Global Navigation Satellite

Independent component analysis (ICA) is one of the most effective approaches in extracting independent signals from a global navigation satellite system (GNSS) regional station network. However, ICA requires the involved time series to be complete, thereby the missing data of incomplete time series should be interpolated beforehand. In this contribution, a modified ICA is proposed, by which the missing data are first recovered based on the reversible property between the original time series and decomposed principal components, then the complete time series are further processed with FastICA. To evaluate the performance of the modified ICA for extracting independent components, 24 regional GNSS network stations located in North China from 2011 to 2019 were selected. After the trend, annual and semiannual terms were removed from the GNSS time series, the first two independent components captured 17.42, 18.44 and 17.38% of the total energy for the North, East and Up coordinate components, more than those derived by the iterative ICA that accounted for 16.21%, 17.72% and 16.93%, respectively. Therefore, modified ICA can extract more independent signals than iterative ICA. Subsequently, selecting the 7 stations with less missing data from the network, we repeatedly process the time series after randomly deleting parts of the data and compute the root mean square error (RMSE) from the differences of reconstructed signals before and after deleting data. All RMSEs of modified ICA are smaller than those of iterative ICA, indicating that modified ICA can extract more exact signals than iterative ICA.

scholarly journals Implication between Geophysical Events and the Variation of Seasonal Signal Determined in GNSS Position Time Series

2021 ◽  
Vol 13 (17) ◽  
pp. 3478
Author(s):  
Sorin Nistor ◽  
Norbert-Szabolcs Suba ◽  
Ahmed El-Mowafy ◽  
Michal Apollo ◽  
Zinovy Malkin ◽  
...  
Keyword(s):  
Time Series ◽  
Satellite System ◽  
Phase Lag ◽  
Time Frequency ◽  
Richter Scale ◽  
Different Types ◽  
Before And After ◽  
Position Time Series ◽  
Global Navigation Satellite ◽  
Seasonal Signal

The seasonal signal determined by the Global Navigation Satellite System (GNSS), which is captured in the coordinate time series, exhibits annual and semi-annual periods. This signal is frequently modelled by two periodic signals with constant amplitude and phase-lag. The purpose of this study is to explore the implication of different types of geophysical events on the seasonal signal in three stages—in the time span that contains the geophysical events, before and after the geophysical event, but also the stationarity phenomena, which is analysed on approximately 200 reference stations from the EPN network since 1995. The novelty of the article is demonstrated by correlating three different types of geophysical events, such as earthquakes with a magnitude greater than 6° on the Richter scale, landslides, and volcanic activity, and analysing the variation in amplitude of the seasonal signal. The geophysical events situated within a radius of 30 km from the epicentre showed a higher seasonal value than when the timespan did not contain a geophysical event. The presence of flicker and random walk noise was computed using overlapping Hadamard variance (OHVAR) and the non-stationary behaviour of the time series of the CORS coordinates in the time frequency analysis was done using continuous wavelet transform (CWT).

scholarly journals Investigation of GIM-TEC disturbances before M ≥ 6.0 inland earthquakes during 2003–2017

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Fuying Zhu ◽  
Yingchun Jiang
Keyword(s):  
Rapid Development ◽  
Science Research ◽  
Satellite System ◽  
Statistical Investigation ◽  
Electron Content ◽  
Total Electron ◽  
Spatial And Temporal Distributions ◽  
Before And After ◽  
Global Ionosphere Map ◽  
Global Navigation Satellite

Abstract With the rapid development of the Global Navigation Satellite System (GNSS) and its wide applications to atmospheric science research, the global ionosphere map (GIM) total electron content (TEC) data are extensively used as a potential tool to detect ionospheric disturbances related to seismic activity and they are frequently used to statistically study the relation between the ionosphere and earthquakes (EQs). Indeed, due to the distribution of ground based GPS receivers is very sparse or absent in large areas of ocean, the GIM-TEC data over oceans are results of interpolation between stations and extrapolation in both space and time, and therefore, they are not suitable for studying the marine EQs. In this paper, based on the GIM-TEC data, a statistical investigation of ionospheric TEC variations of 15 days before and after the 276 M ≥ 6.0 inland EQs is undertaken. After eliminating the interference of geomagnetic activities, the spatial and temporal distributions of the ionospheric TEC disturbances before and after the EQs are investigated and compared. There are no particularly distinct features in the time distribution of the ionospheric TEC disturbances before the inland EQs. However, there are some differences in the spatial distribution, and the biggest difference is precisely in the epicenter area. On the other hand, the occurrence rates of ionospheric TEC disturbances within 5 days before the EQs are overall higher than those after EQs, in addition both of them slightly increase with the earthquake magnitude. These results suggest that the anomalous variations of the GIM-TEC before the EQs might be related to the seismic activities.

Performance Assessment of GNSS-R Polarimetric Observations for Sea Level Monitoring

2021 ◽  
Author(s):  
Mahmoud Rajabi ◽  
Mstafa Hoseini ◽  
Hossein Nahavandchi ◽  
Maximilian Semmling ◽  
Markus Ramatschi ◽  
...  
Keyword(s):  
Time Series ◽  
Circular Polarization ◽  
Sea Level ◽  
Tide Gauge ◽  
Satellite System ◽  
Sea Surface ◽  
Analysis Tool ◽  
Lower Accuracy ◽  
Coastal Sea ◽  
Global Navigation Satellite

<p>Determination and monitoring of the mean sea level especially in the coastal areas are essential, environmentally, and as a vertical datum. Ground-based Global Navigation Satellite System Reflectometry (GNSS-R) is an innovative way which is becoming a reliable alternative for coastal sea-level altimetry. Comparing to traditional tide gauges, GNSS-R can offer different parameters of sea surface, one of which is the sea level. The measurements derived from this technique can cover wider areas of the sea surface in contrast to point-wise observations of a tide gauge.  </p><p>We use long-term ground-based GNSS-R observations to estimate sea level. The dataset includes one-year data from January to December 2016. The data was collected by a coastal GNSS-R experiment at the Onsala space observatory in Sweden. The experiment utilizes three antennas with different polarization designs and orientations. The setup has one up-looking, and two sea-looking antennas at about 3 meters above the sea surface level. The up-looking antenna is Right-Handed Circular Polarization (RHCP). The sea-looking antennas with RHCP and Left-Handed Circular Polarization (LHCP) are used for capturing sea reflected Global Positioning System (GPS) signals. A dedicated reflectometry receiver (GORS type) provides In-phase and Quadrature (I/Q) correlation sums for each antenna based on the captured interferometric signal. The generated time series of I/Q samples from different satellites are analyzed using the Least Squares Harmonic Estimation (LSHE) method. This method is a multivariate analysis tool which can flexibly retrieve the frequencies of a time series regardless of possible gaps or unevenly spaced sampling. The interferometric frequency, which is related to the reflection geometry and sea level, is obtained by LSHE with a temporal resolution of 15 minutes. The sea level is calculated based on this frequency in six modes from the three antennas in GPS L1 and L2 signals.</p><p>Our investigation shows that the sea-looking antennas perform better compared to the up-looking antenna. The highest accuracy is achieved using the sea-looking LHCP antenna and GPS L1 signal. The annual Root Mean Square Error (RMSE) of 15-min GNSS-R water level time series compared to tide gauge observations is 3.7 (L1) and 5.2 (L2) cm for sea-looking LHCP, 5.8 (L1) and 9.1 (L2) cm for sea-looking RHCP, 6.2 (L1) and 8.5 (L2) cm for up-looking RHCP. It is worth noting that the GPS IIR block satellites show lower accuracy due to the lack of L2C code. Therefore, the L2 observations from this block are eliminated.</p>

scholarly journals GNSS Multipath Detection Using Continuous Time-Series C/N0

Sensors ◽  
2020 ◽  
Vol 20 (14) ◽  
pp. 4059
Author(s):  
Nobuaki Kubo ◽  
Kaito Kobayashi ◽  
Rei Furukawa
Keyword(s):  
Time Series ◽  
Continuous Time ◽  
Urban Areas ◽  
Satellite System ◽  
Line Of Sight ◽  
Static Tests ◽  
Gnss Receivers ◽  
Multipath Detection ◽  
Global Navigation Satellite ◽  
Multipath Errors

The reduction of multipath errors is a significant challenge in the Global Navigation Satellite System (GNSS), especially when receiving non-line-of-sight (NLOS) signals. However, selecting line-of-sight (LOS) satellites correctly is still a difficult task in dense urban areas, even with the latest GNSS receivers. This study demonstrates a new method of utilization of C/N0 of the GNSS to detect NLOS signals. The elevation-dependent threshold of the C/N0 setting may be effective in mitigating multipath errors. However, the C/N0 fluctuation affected by NLOS signals is quite large. If the C/N0 is over the threshold, the satellite is used for positioning even if it is still affected by the NLOS signal, which causes the positioning error to jump easily. To overcome this issue, we focused on the value of continuous time-series C/N0 for a certain period. If the C/N0 of the satellite was less than the determined threshold, the satellite was not used for positioning for a certain period, even if the C/N0 recovered over the threshold. Three static tests were conducted at challenging locations near high-rise buildings in Tokyo. The results proved that our method could substantially mitigate multipath errors in differential GNSS by appropriately removing the NLOS signals. Therefore, the performance of real-time kinematic GNSS was significantly improved.

scholarly journals VISUAL ANALYSIS OF RECURRENCE OF TIME SERIES OF THE COORDINATES ENU IN THE GPS STATIONS

2018 ◽  
Vol 24 (4) ◽  
pp. 470-484
Author(s):  
Alfonso Tierra ◽  
Rubén León ◽  
Alexis Tinoco-S ◽  
Carolina Cañizares ◽  
Marco Amores ◽  
...  
Keyword(s):  
Time Series ◽  
Continuous Monitoring ◽  
Visual Analysis ◽  
Finite Impulse Response ◽  
Satellite System ◽  
Nearest Neighbours ◽  
Low Pass ◽  
Global Navigation Satellite ◽  
Low Pass Filters ◽  
Content Information

Abstract The time series content information about the dynamic behavior of the system under study. This behavior could be complex, irregular and no lineal. For this reason, it is necessary to study new models that can solve this dynamic more satisfactorily. In this work a visual analysis of recurrence from time series of the coordinate’s variation ENU (East, North, Up) will be made. This analysis was obtained from nine continuous monitoring stations GPS (Global Navigation Satellite System); the intention is to study their behavior, they belong to the Equatorian GPS Network that materializes the reference system SIRGAS - ECUADOR. The presence of noise in the observations was reduced using digital low pass filters with Finite Impulse Response (FIR). For these series, the time delay was determined using the average mutual information, and for the minimum embedding dimension the False Nearest Neighbours (FNN) method was used; the purpose is to obtain the recurrent maps of each coordinates. The results of visual analysis show a strong tendency, especially in the East and North coordinates, while the Up coordinates indicate discontinued, symmetric and periodic behavior.

scholarly journals Brief communication: Co-seismic displacement on 26 and 30 October 2016 (<i>M</i><sub>w</sub> = 5.9 and 6.5) – earthquakes in central Italy from the analysis of a local GNSS network

2017 ◽  
Vol 17 (11) ◽  
pp. 1885-1892 ◽  
Author(s):  
Giorgio De Guidi ◽  
Alessia Vecchio ◽  
Fabio Brighenti ◽  
Riccardo Caputo ◽  
Francesco Carnemolla ◽  
...  
Keyword(s):  
Surface Deformation ◽  
Central Italy ◽  
Geodetic Network ◽  
Satellite System ◽  
Fault System ◽  
Seismic Sequence ◽  
Epicentral Area ◽  
Seismic Displacement ◽  
Fault Trace ◽  
Global Navigation Satellite

Abstract. On 24 August 2016 a strong earthquake (Mw = 6.0) affected central Italy and an intense seismic sequence started. Field observations, DInSAR (Differential INterferometry Synthetic-Aperture Radar) analyses and preliminary focal mechanisms, as well as the distribution of aftershocks, suggested the reactivation of the northern sector of the Laga fault, the southern part of which was already rebooted during the 2009 L'Aquila sequence, and of the southern segment of the Mt Vettore fault system (MVFS). Based on this preliminary information and following the stress-triggering concept (Stein, 1999; Steacy et al., 2005), we tentatively identified a potential fault zone that is very vulnerable to future seismic events just north of the earlier epicentral area. Accordingly, we planned a local geodetic network consisting of five new GNSS (Global Navigation Satellite System) stations located a few kilometres away from both sides of the MVFS. This network was devoted to working out, at least partially but in some detail, the possible northward propagation of the crustal network ruptures. The building of the stations and a first set of measurements were carried out during a first campaign (30 September and 2 October 2016). On 26 October 2016, immediately north of the epicentral area of the 24 August event, another earthquake (Mw = 5.9) occurred, followed 4 days later (30 October) by the main shock (Mw = 6.5) of the whole 2016 summer–autumn seismic sequence. Our local geodetic network was fully affected by the new events and therefore we performed a second campaign soon after (11–13 November 2016). In this brief note, we provide the results of our geodetic measurements that registered the co-seismic and immediately post-seismic deformation of the two major October shocks, documenting in some detail the surface deformation close to the fault trace. We also compare our results with the available surface deformation field of the broader area, obtained on the basis of the DInSAR technique, and show an overall good fit.

scholarly journals SibNet — Siberian Global Navigation Satellite System Network: Current state

2018 ◽  
Vol 4 (4) ◽  
pp. 82-94 ◽  
Author(s):  
Юрий Ясюкевич ◽  
Yury Yasyukevich ◽  
Артем Веснин ◽  
Artem Vesnin ◽  
Наталья Перевалова ◽  
...  
Keyword(s):  
Global Navigation Satellite System ◽  
Satellite System ◽  
General Information ◽  
Navigation Satellite ◽  
Main Research ◽  
Current State ◽  
Wide Range ◽  
Global Navigation ◽  
Using Data ◽  
Global Navigation Satellite

In 2011, ISTP SB RAS began to deploy a routinely operating network of receivers of global navigation satellite system signals. To date, eight permanent and one temporal sites in the Siberian region are operating on a regular basis. These nine sites are equipped with 12 receivers. We use nine multi-frequency multi-system receivers of Javad manufacturer, and three specialized receivers NovAtel GPStation-6 designed to measure ionospheric phase and amplitude scintillations. The deployed network allows a wide range of ionospheric studies as well as studies of the navigation system positioning quality under various heliogeophysical conditions. This article presents general information about the network, its technical characteristics, and current state, as well as the main research problems that can be solved using data from the network.

scholarly journals An intercalibrated dataset of Total Column Water Vapour and Wet Tropospheric Correction based on MWR on board ERS-1, ERS-2 and Envisat

2016 ◽  
Author(s):  
Ralf Bennartz ◽  
Heidrun Höschen ◽  
Bruno Picard ◽  
Marc Schröder ◽  
Martin Stengel ◽  
...  
Keyword(s):  
Time Series ◽  
Water Vapour ◽  
Variational Approach ◽  
Satellite System ◽  
Background Information ◽  
Liquid Water Path ◽  
One Dimensional ◽  
Global Navigation Satellite ◽  
Microwave Radiometers ◽  
Total Column

Abstract. The Microwave Radiometers (MWR) on-board ERS-1, ERS-2, and Envisat provide a continuous time series of brightness temperature observations between 1991 and 2012. Here we report on a new Total Column Water Vapour (TCWV) and Wet Tropospheric Correction (WTC) dataset that builds on this time series. We use a one-dimensional variational approach to derive TCWV from MWR observations and ERA-Interim background information. A particular focus of this study lies on the intercalibration of the three different instruments, which is performed using constraints on liquid water path (LWP) and TCWV. Comparing our MWR-derived time series of TCWV against TCWV derived from Global Navigation Satellite System (GNSS) we find that the MWR-derived TCWV time series is stable over time. However, observations potentially affected by precipitation show a degraded performance compared to precipitation-free observations in terms of the accuracy of retrieved TCWV. An analysis of WTC shows further that the retrieved WTC is superior to purely model-derived WTC for all satellites and for the entire time series. Even compared to operational WTC retrievals, which incorporate additional observational data, the here-described dataset shows improvements in particular for the mid-latitudes and for the two earlier satellites ERS-1 and ERS-2. The dataset is publicly available under doi:10.5676/DWD_EMIR/V001.

Rapid Geodetic Observations of Spatiotemporally Varying Postseismic Deformation Following the Ridgecrest Earthquake Sequence: The U.S. Geological Survey Response

2020 ◽  
Vol 91 (4) ◽  
pp. 2108-2123 ◽  
Author(s):  
Benjamin A. Brooks ◽  
Jessica Murray ◽  
Jerry Svarc ◽  
Eleyne Phillips ◽  
Ryan Turner ◽  
...  
Keyword(s):  
Time Series ◽  
Horizontal Displacement ◽  
The United States ◽  
Satellite System ◽  
Earthquake Sequence ◽  
Postseismic Deformation ◽  
Displacement Fields ◽  
Surface Rupture ◽  
Global Navigation Satellite ◽  
The U.S

Abstract The U.S. Geological Survey’s geodetic response to the 4–5 July 2019 (Pacific time) Ridgecrest earthquake sequence comprised primarily the installation and/or reoccupation of Global Navigation Satellite System (GNSS) monumentation. Our response focused primarily on the United States’ Navy’s China Lake Naval Air Weapons Station base (NAWSCL). This focus was because much of the surface rupture occurred on the NAWSCL and because of NAWSCL access restrictions only permitting Federal and State of California personnel. In total, we measured or are still measuring at 24 sites, 14 of which were on the NAWSCL and, as of this writing, operational. The majority of sites were set up as continuous stations logging at either 1 sample per second or 1 sample per 15 s. Two stations were recording a 200 m cross-rupture aperture starting ∼10  hr after the M 6.4 event, and they recorded the coseismic displacements of the M 7.1. Approximately, 1 hr after the M 7.1 event, two new stations were recording a ∼200  m cross-rupture aperture of the surface rupture. In the days following, we established the rest of the stations ranging to a distance of ∼15  km from the M 7.1 principal rupture trace. The lack of differential displacement across the M 6.4 rupture during the M 7.1 event suggests that it did not reactivate the M 6.4 plane. The lack of differential cross-fault displacement for both events suggests that rapid shallow afterslip did not occur at those two locations. The postseismic time series from these stations shows centimeters of horizontal displacement over periods of a few months. They record a mixture of fault-parallel and fault-normal displacements that, in conjunction with analysis of more spatially complete Interferometric Synthetic Aperture Radar displacement fields, suggest that both poroelastic and afterslip phenomena occur along the M 6.4 and 7.1 rupture planes. Using preliminary data from these and other regional stations, we also explore the Ridgecrest sequence’s effect on regional GNSS time series and the differentiation of long-term postseismic motions and secular deformation rates. We find that redefining a common-mode noise filter using different GNSS stations that are assumed to be unaffected by the earthquakes results in small but systematic differences in the regional velocity field estimate.

Sign in / Sign up

Export Citation Format

Share Document