scholarly journals Use of Image Correlation to Measure Macroscopic Strains by Hygric Swelling in Sandstone Rocks

2021 ◽  
Vol 11 (6) ◽  
pp. 2495
Author(s):  
Belén Ferrer ◽  
María-Baralida Tomás ◽  
David Mas

Some materials undergo hygric expansion when soaked. In porous rocks, this effect is enhanced by the pore space, because it allows water to reach every part of its volume and to hydrate most swelling parts. In the vicinity, this enlargement has negative structural consequences as adjacent elements support some compressions or displacements. In this work, we propose a normalized cross-correlation between rock surface texture images to determine the hygric expansion of such materials. We used small porous sandstone samples (11 × 11 × 30 mm3) to measure hygric swelling. The experimental setup comprised an industrial digital camera and a telecentric objective. We took one image every 5 min for 3 h to characterize the whole swelling process. An error analysis of both the mathematical and experimental methods was performed. The results showed that the proposed methodology provided, despite some limitations, reliable hygric swelling information by a non-contact methodology with an accuracy of 1 micron and permitted the deformation in both the vertical and horizontal directions to be explored, which is an advantage over traditional linear variable displacement transformers.

2021 ◽  
Author(s):  
Rishabh Prakash Sharma ◽  
Max P. Cooper ◽  
Anthony J.C. Ladd ◽  
Piotr Szymczak

<p>Dissolution of porous rocks by reactive fluids is a highly nonlinear process resulting in a variety of dissolution patterns, the character of which depends on physical conditions such as flow rate and reactivity of the fluid. Long, finger-like dissolution channels, “wormholes”, are the main subject of interest in the literature, however, the underlying dynamics of their growth remains unclear. </p><p>While analyzing the tomography data on wormhole growth.  one open question is to define the exact position of the tip of the wormhole. Near the tip the wormhole gradually thins out and the proper resolution of its features is hindered by the finite spatial resolution of the tomographs. In particular, we often observe in the near-tip region several disconnected regions of porosity growth, which - as we hypothesized - are connected by the dissolution channels at subpixel scale. In this study, we show how these features can be better resolved by using numerically calculated flow fields in the reconstructed pore-space. </p><p>We used 70 micrometers, 16-bit grayscale X-ray computed microtomography (XCMT) time series scans of limestone cores, 14mm in diameter and 25mm in length. Scans were performed during the entire dissolution experiment with an interval of 8 minutes. These scans were further processed using a 3-phase segmentation proposed by Luquot et al.[1], in which grayscale voxels are converted to macro-porosity, micro-porosity and grain phases from their grayscale values. The macro-porous phase is assigned a porosity of 1, while the grain phase is assigned 0. Micro-porous regions are assigned an intermediate value determined by linear interpolation between pore and grain threshold using grayscale values. An OpenFOAM based, Darcy-Brinkman solver, porousFoam, is then used to calculate the flow field in this extracted porosity field. </p><p>Porosity contours reconstructed from the tomographs show some disconnected porosity growth near the tip region which later become part of the wormhole in subsequent scans. We have used a novel approach by including the micro-porosity phase in pore-space to calculate the flow-fields in the near-tip region. The calculated flow fields clearly show an extended region of focused flow in front of the wormhole tip, which is a manifestation of the presence of a wormhole at the subpixel scale. These results show that micro-porosity plays an important role in dissolution and 3-phase segmentation combined with the flow field calculations is able to capture the sub-resolved dissolution channels. </p><p> </p><p> [1] Luquot, L., Rodriguez, O., and Gouze, P.: Experimental characterization of porosity structure and transport property changes in limestone undergoing different dissolution regimes, Transport Porous Med., 101, 507–532, 2014</p>


2020 ◽  
Author(s):  
Valentin Dunsing ◽  
Annett Petrich ◽  
Salvatore Chiantia

AbstractFluorescence fluctuation spectroscopy provides a powerful toolbox to quantify transport dynamics and interactions between biomolecules in living cells. For example, cross-correlation analysis of spectrally separated fluctuations allows the investigation of inter-molecular interactions. This analysis is conventionally limited to two fluorophore species that are excited with a single or two different laser lines and detected in two non-overlapping spectral channels. However, signaling pathways in biological systems often involve interactions between multiple biomolecules, e.g. formation of ternary or quaternary protein complexes. Here, we present a methodology to investigate such interactions at the plasma membrane (PM) of cells, as encountered for example in viral assembly or receptor-ligand interactions. To this aim, we introduce scanning fluorescence spectral correlation spectroscopy (SFSCS), a combination of scanning fluorescence correlation spectroscopy with spectrally resolved detection and decomposition. We first demonstrate that SFSCS allows cross-talk-free cross-correlation analysis of PM-associated proteins labeled with strongly overlapping fluorescent proteins (FPs), such as mEGFP and mEYFP, excited with a single excitation line. We then verify the applicability of SFSCS for quantifying diffusion dynamics and protein oligomerization (based on molecular brightness analysis) of two protein species tagged with spectrally overlapping FPs. Adding a second laser line, we demonstrate the possibility of three- and four-species (cross-) correlation analysis using mApple and mCherry2, as examples of strongly overlapping FP tags in the red spectral region. Next, we apply this scheme to investigate the interactions of influenza A virus (IAV) matrix protein 2 (M2) with two cellular host factors simultaneously. Using the same set of fluorophores, we furthermore extend the recently presented raster spectral image correlation spectroscopy (RSICS) approach to four species analysis, successfully demonstrating multiplexed RSICS measurements of protein interactions in the cell cytoplasm. Finally, we apply RSICS to investigate the assembly of the ternary IAV polymerase complex and report a 2:2:2 stoichiometry of these protein assemblies in the nucleus of living cells.


2021 ◽  
Author(s):  
Pietro de Anna ◽  
Amir A. Pahlavan ◽  
Yutaka Yawata ◽  
Roman Stocker ◽  
Ruben Juanes

<div> <div> <div> <p>Natural soils are host to a high density and diversity of microorganisms, and even deep-earth porous rocks provide a habitat for active microbial communities. In these environ- ments, microbial transport by disordered flows is relevant for a broad range of natural and engineered processes, from biochemical cycling to remineralization and bioremediation. Yet, how bacteria are transported and distributed in the sub- surface as a result of the disordered flow and the associ- ated chemical gradients characteristic of porous media has remained poorly understood, in part because studies have so far focused on steady, macroscale chemical gradients. Here, we use a microfluidic model system that captures flow disorder and chemical gradients at the pore scale to quantify the transport and dispersion of the soil-dwelling bacterium Bacillus subtilis in porous media. We observe that chemotaxis strongly modulates the persistence of bacteria in low-flow regions of the pore space, resulting in a 100% increase in their dispersion coefficient. This effect stems directly from the strong pore-scale gradients created by flow disorder and demonstrates that the microscale interplay between bacterial behaviour and pore-scale disorder can impact the macroscale dynamics of biota in the subsurface.</p> </div> </div> </div>


Geophysics ◽  
2020 ◽  
Vol 85 (4) ◽  
pp. MR201-MR212
Author(s):  
Zhi-Qiang Yang ◽  
Tao He ◽  
Chang-Chun Zou

Velocity dispersion is a common phenomenon for fluid-charged porous rocks and carries important information on the pore structure and fluid in reservoir rocks. Previous ultrasonic experiments had measured more significant non-Biot velocity dispersion on saturated reservoir sandstones with increasing pore-fluid viscosity. Although wave-induced local squirt-flow effect could in theory cause most of the non-Biot velocity dispersion, its quantitative prediction remains a challenge. Several popular models were tested to predict the measured velocities under undrained conditions, but they either underestimated the squirt-flow effect or failed to simultaneously satisfy P- and S-wave velocity dispersions (especially for higher viscosity fluids). Based on the classic double-porosity theory that pore space is comprised of mainly stiff/Biot’s porosity and minor compliant porosity, an effective “wet frame” was hypothesized to account for the squirt-flow effect, whose compliant pores are filled with a hypothesized fluid with dynamic modulus. A new dynamic elastic model was then introduced by extending Biot theory to include the squirt-flow effect, after replacing the dry-frame bulk/shear moduli with their wet-frame counterparts. In addition to yielding better velocity predictions for P- and S-wave measurements of different fluid viscosities, the new model is also more applicable because its two key tuning parameters (i.e., the effective aspect ratio and porosity of compliant pores) at in situ reservoir pressure could be constrained with laboratory velocity measurements associated with pore-fluid viscosities.


2005 ◽  
Vol 127 (1) ◽  
pp. 40-45 ◽  
Author(s):  
J. Zhou ◽  
Z. Gao ◽  
A. M. Cuitino ◽  
W. O. Soboyejo

This paper presents the results of the combined experimental investigation and digital image correlation (DIC) analysis of the fatigue failure of open cell aluminum foams. Compression–compression cyclic loads were applied to foam specimens under the as-fabricated condition. Following characterization of the S-N curve behavior, the macroscale deformation of the tested foam under fatigue was recorded using an in-situ digital camera. The deformation sequence was then analyzed using DIC technique. It was found that foams failed with an abrupt strain jump when shear bands were formed, and serious deformation up to more than 30% was developed in the center of the shear band. The ex-situ scanning electron microscopy analysis indicated that the abrupt strain jump was due to the microscale damage accumulation in struts where surface cracks were formed and propagated.


2005 ◽  
Vol 89 (2) ◽  
pp. 1251-1260 ◽  
Author(s):  
Santiago Costantino ◽  
Jonathan W.D. Comeau ◽  
David L. Kolin ◽  
Paul W. Wiseman

2014 ◽  
Vol 92 ◽  
pp. 242-247
Author(s):  
Rafael G.M. Saracura ◽  
Rodrigo B. Canto ◽  
Victor Carlos Pandolfelli ◽  
Nicolas Schmitt ◽  
François Hild

This paper deals with the characterization of crack networks on the surface of refractory castable slabs, which are induced by stresses arising during the curing and drying (CD) stages. Images of the surface of castable samples placed in a house-made climatic chamber were recorded during the CD stages with a digital camera and processed by Digital Image Correlation (DIC) tomeasure the displacement field. Post-processing of DIC results were performed to estimate the length, orientation and opening of cracks in networks. The methodology is detailed and first analyses of experimental results are shown.


2000 ◽  
Vol 200 (1) ◽  
pp. 14-25 ◽  
Author(s):  
P. W. Wiseman ◽  
J. A. Squier ◽  
M. H. Ellisman ◽  
K. R. Wilson

2012 ◽  
Vol 1475 ◽  
Author(s):  
D.L. Engelberg ◽  
J.A. Duff ◽  
L. Murray ◽  
L. Dodds ◽  
N. Mobasher ◽  
...  

ABSTRACTA range of advanced imaging techniques have been brought together to provide a comprehensive picture of cement microstructure for nuclear waste immobilization. Image analysis of Nirex Reference Vault Backfill (NRVB) has been used to characterize the Calcium-Silicate-Hydrate (C-S-H) matrix fraction. Through weight loss measurements and digital image correlation of OPC-based cement blends we have quantified the development of microstructure surface strains during the initial 48 hrs hardening period. The build-up of displacements on the microstructure scale indicated grain-like compressive areas, surrounded by a network of tensile regions. Serial sectioning of NRVB using ultra-microtome cutting has been explored for advanced high-resolution 3D microstructure characterization, while X-ray Computed Tomography (XCT) has been used to obtain information of the 3-D pore space and size distribution of air pores in NRVB non-destructively.


Sign in / Sign up

Export Citation Format

Share Document